Tender For Provn Of Toilet Block Near Main Office Bldg No T-69 Of 27 Mtn Div Pro Unit At Kalimpong Mil Stn Under Ge 867 Ews
Tender Value
4.82 Lakhs
Estimated cost
Bid Submission
21 Jul 2026
12 days left
EMD
9640
Bank guarantee accepted
Document Fee
300
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kalimpong → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Toilet Block Near Main Office Bldg No T-69 Of 27 Mtn Div Pro Unit At Kalimpong Mil Stn Under Ge 867 Ews
BOQ
| Sl. No. | Item Description |
| 1 | Surface dressing n exc 15 cm deep and getting out in soft/loose soil all as specified and as directed. |
| 2 | M&L for Excavating over areas exc 1.5m depth all as specified and directed by Engr-in-charge. |
| 3 | Excavation in trenches not exc 1.5 mtr wide and not exc 1.5 mtr in depth; for foundation etc. and getting out in Soft/ loose soil. |
| 4 | M & L PCC 1:4:8 type D-2 (Using 40 mm grade aggregate) in foundation, filling and mass concrete complete all as specified. |
| 5 | M&L for brickwork with flyash brick, straight or curved on plan nexc in mortar 1:6 using pre cast cement concret Block 1:3:6 type C-1 using 20mm graded stone agg all as specified and directed. |
| 6 | M & L hard core of gauge n. exc 63mm, deposited, spread and levelled in layers n. exc 15cm thick watered and rammed to a true surfaces in broken stone or boulders complete all as specified. |
| 7 | Morum/red bajri filling in floors or paving laid in layers n exc 15cm thick, spread, levelled and rammed incl waterings as directed and specified by Engr-in-charge. |
| 8 | M & L 75 mm thick Cement concrete type D-2, 1:3:6(40mm graded aggregate) as in subbase as directed and specified by Engr-in-Charge. |
| 9 | M&L PCC 1:3:6 Type C1 using 20mm stone aggregate as in plith protection complete all as specified. |
| 10 | M & L Damp proof course 40 mm thick in cement concrete (1:2:4) Type B-0 to horizontal or vertical surfaces including necessary formwork complete all as specified and directed. |
| 11 | M&L for concrete 1:4:8 type D2 in 150mm bore pipe bed to drain pipes incl packing under and haunching against the side of pipes after they are laid and tested. |
| 12 | M&L for providing Pre-cast RCC (1:2:4) type B1 as in cover slabs of manhole and similar location (using 20mm graded aggregates) including necessary form work and set in all cement mortar (1:4) complete all as specified and directed. |
| 13 | M&L for providing cement concrete in Type C1 1:3:6 using 20mm graded aggregates lintel upto 1.5m clear span, cills, steps, seismic and other similar bands plinth course, string courses, lacing courses, parapets and railing upto 60 cm in height copings, kneelrs apex stones, bed plates, kerbs not provided. water troughs and the like incl weathering slightly rounded or chamfered angels and throating as directed. |
| 14 | M&L for RCC Nominal Mix Type B1, 1:2:4 (20 mm graded aggregate) Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete all as specified and directed by Engr- in -charge. |
| 15 | M&L for RCC Nominal Mix Type B1, 1:2:4 (20 mm graded aggregate) Beams, cantilevers, bressummers, lintels over 1.5m all as specified and directed by Engr- in -charge. |
| 16 | Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundationand plinth beams; and similar work; vertical or to batter complete all as specified. |
| 17 | Form work to sides and soffits of floor or roof beam, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc also splays between floors and beams,etc. complete all as specified. |
| 18 | M & L TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 19 | M & L TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified. |
| 20 | S&F for structural steel work as in roof trusses (framed), trussed, purlins, framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc Fe-290 (Gde E165) complete all as specified. |
| 21 | Supply & Installation Pre-painted, High Tensile 550 Mpa yield strength, Bare Galvalume Steel Sheet having maximum pitch of 250mm c/c & minimum 30mm crest depth in length as per site requirement. The galvalume sheet is to be manufactured out of 0.50mm (TCT) (Total Coated Thickness), with zinc-aluminium alloy of AZ-150. The GI based steel sheet shall have a hot dip metallic zinc-aluminium alloy coating of zinc (43.5%), aluminium (55%) & Silicon (1.5%). The profile is having return leg for proper side lap. The sheet shall be fixed using self Drilling/Self Tapping Screw with EPDM Seal Complete all as per manufacturers specifications. |
| 22 | S&F GI frame work of size 605 x 605 mm, for seamless celing comprising of GI perimeter chanel 0.55mm thick with two unequal flanges of 20 and 30 mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and as directed. |
| 23 | S&F Hangers 2 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified. |
| 24 | M&L 4mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/Gt/Aluminium framework with screws complete all as specified. |
| 25 | M & L Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed or bedding layer in CM (1:6) complete all as specified. |
| 26 | M&L 350X250 mm X7mm thick / 450X350X7mm thick coloured glazed ceramic tiles fixed as in vertical surface such as risers of steps, skirting, dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile over and including 10 mm thick backing plaster in CM (1:4) finished even and rough complete all as specified and directed. |
| 27 | M&L rendering 15 mm thick in CM (1:6) on fair faces of brick work or concrete surfaces to be finished even and smooth using extra cement mixed all as specified and as directed. |
| 28 | M&L rendering 20 mm thick in two layer(10+10mm) CM (1:4) on fair faces of brick work or concrete surfaces to be finished even and smooth using extra cement mixed with intergral water proofing compound @ 3% by weight of cement (WPC measured and paid separately) all as specified and as directed. |
| 29 | Supply only integral water proofing compound (Make : Squant/CTCO) all as specified and as directed. |
| 30 | M&L for preparation on newly plastered/previously untreated surfaces of wall and applying two coats of cement base paint all as specified and as directed. |
| 31 | M&L for three coats of white wash on new plastered surface including prepration of wall surface all as specified and as directed. |
| 32 | M & L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer all as spd & directed by Engr-in-Charge. |
| 33 | Returning filling in , including, spreading, levelling, watering and well ramming in layers not exc 25cm in soft / loose soil. |
| 34 | Removing excavated material n. exc 50m and depositing where directed at a level n. exc 1.5m above the starting point in soils. |
| 35 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles a PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; both side Prelam PVC sheet used instead of Plaincolour PVC sheet. Stile and rails feathered at edges beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. |
| 36 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet used reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing. |
| 37 | S & F Butt hinges, 100 mm size, heavy weight, cold rolled mild steel, and fixed. |
| 38 | S & F Mild steel barrel tower bolts 200 mm, stove enamelled black, with bright bolt and fixed. |
| 39 | S & F 150mm long aluminium handle cost type anodised. |
| 40 | S & F Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified. |
| 41 | S&F of 250 mm long aluminium alloy, anodised sliding door bolts with haps staple(bolt type), and fixing clips of sheet, cast or extruted sections and fixing bolt and sliding bolts of extruted sections or cast aluminium alloy and fixed complete all as specified and directed. |
| 42 | S & F 4 mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified. |
| 43 | S & F for 600x450mm bovelled edge mirror of selected quality glass mounted on 6mm thick AC building board of commercial ply wood and fixed to wooden plugs with chromium plated brass secrews and cup washers comlete all as specified. |
| 44 | S&F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. |
| 45 | S & F Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed. |
| 46 | S & F vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) Water closet (Squatt pattern) com plete including provision of lime concrete bedding complete all as specified. |
| 47 | S&F PVC (SWR) \\"P\\" trap 110 mm bore complete all as specified and directed. |
| 48 | S&F PVC (SWR) gully trap 110 mm bore, setting jointing with solvant cement complete all as specified. |
| 49 | S & F PVC valve less , syphonic action type flushing cistern 10 ltr capacity low level, whit, with inlet, ball valve float, flush pipe and handle including brackets, low level fluslhing cistern (exclusive of brackets), and connections to pipes and fixing of chain and pull, or lever, if any complete all as specified and directed. |
| 50 | S & F bib taps 15mm bore cast copper alloy chromium plated with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule & fixed 15mm bore complete all as specified. |
| 51 | S & F Pillar taps 15mm bore, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified. |
| 52 | S & F Grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified. |
| 53 | S&F Vitreous China wash basin, flat back, size 450x300mm white, excluding taps, waste, chain and plug and rcelain stopper but including brackets complete all as specified and directed. |
| 54 | S & F Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe)Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified. |
| 55 | S&F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms complete all as specified. |
| 56 | S&F 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified. |
| 57 | S & F Stop cock 15 mm bore cast copper alloy screwed down high pressure fancy type, chromium plated with long shank and cup (concealed type) complete all as specified. |
| 58 | Cutting chases, pinning in brick/pcc block wall and making good to facings where equired and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring,etc., and making good, cutting not exc 10 cm girth complete all as specified. |
| 59 | S & F 15mm bore of tube medium grade galvanized with all fittings & fixed complete to walls & ceiling or laid in floors complete all as specified. |
| 60 | M &L PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified. |
| 61 | S & F PVC (SWR) pipe 75mm bore single socketed in any length with rubber ring joint fixed to wall (ISI Marked) all as specified and as directed. |
| 62 | S & F PVC (SWR) pipe 110mm bore single socketed in any length with rubber ring joint laid in trenches or in floor complete all as specified. |
| 63 | S&F PVC ( SWR ) bends 75 mm bore complete all as specified. |
| 64 | S&F PVC ( SWR ) bends 110 mm bore complete all as specified. |
| 65 | S&F 110mm bore PVC (SWR) vent cowl complete all as specified. |
| 66 | S&F PVC (SWR) branch pieces 75 mm (Single Y) equal or unequal complete all as specified. |
| 67 | S&F PVC (SWR) branch pieces 110 mm (Single Y) equal or unequal complete all as specified. |
| 68 | M & L for concealed point wiring with two single core 1.5 sqmm PVC insulated, unsheathed, FRLSH cable, 1100 volts grade, ISI marked with multi stranded copper conductor with proper colour coding drawn through and including non-metallic PVC conduit (medium grade) with all fittings and accessories ISI marked concealed in wall/fixed to roof,ceiling etc incl provision of 1.5 sqmm PVC insulated, multistranded, unsheathed, copper conductor cable, FRLSH, ISI marked as earth continuity conductor (green in colour) connected to common earth dolly incl fixing of modular metal flush boxes of appropriate size & thickness fixed flush to wall with modular back plate and top cover for mounting switch, sockets etc including cutting chases for conduits & sinkings for modular boxes & making good the disturbed surfaces, matching to the existing one etc for one light/Exhaust fan point controlled by one, one way switch 5/6 Amps. complete all as specified & as directed. |
| 69 | All as per item No 68.00 here in before but for one 3 pin 5/6 Amps switch socket outlet point controlled by one switch on independent board. |
| 70 | Supply and fix Modular switch 1 way 6 A,1 module 230 Volts,50Hz, ISI marked all as specified and as directed. |
| 71 | Supply and fix Socket, 6A-2/3 pin combined 2 module 230 Volts,50Hz, ISI marked all as specified and as directed. |
| 72 | Supply & Fixing ceiling rose surface bakelite 65 X 50 mm three terminal all as specified and as directed. |
| 73 | Supply and fixing lamp holder insulated body with back plate for batten fitting all as specified and as directed. |
| 74 | Supply and fixing LED retro fit lamp B-22 holder base with poly carbonate body and aluminium heat shrink of 10W complete all as specified and directed. |
| 75 | Supply and fixing LED batten surface / wall mounted with extruded aluminium box type housing, high optically efficient polycarbonate diffuser, in built electronic driver duly wired up to terminal block, power consumption 20W, system efficiency of ≥100 lumens/W, Ingress protection IP 20, colour rendering index CRI>80, driver efficiency>85%, power factor > 0.90, THD <20% as per IEC 61000-3-2, colour temp -6500K, surge protection 2.5 KV, 50,000 burning hrs (min) with operating range of 150-270 V AC,complete all as per specified and directed. |
| 76 | Supply and fixing LED batten surface / wall mounted with extruded aluminium box type housing, high optically efficient polycarbonate diffuser, in built electronic driver duly wired up to terminal block, power consumption 10W, system efficiency of ≥100 lumens/W, Ingress protection IP 20, colour rendering index CRI>80, driver efficiency>85%, power factor > 0.90, THD <20% as per IEC 61000-3-2, colour temp -6500K, surge protection 2.5 KV, 50,000 burning hrs (min) with operating range of 150-270 V AC,complete all as per specified and directed. |
| 77 | Supply and fix LED bulkhead light of 10 W with system efficiency of ≥90 lumens/W, Ingress protection IP 66, colour rendering index CRI>80, driver efficiency>85%, power factor > 0.90, THD <20% as per IEC 61000-3-2, colour temp -6500K, surge protection 2.5 KV, 50,000 burning hrs (min) as per L7O criteria with range 150-270V AC and pressure die-cast housing along with polycarbonate diffuser and LED's IP-65 protction of watt,PF>0.95, complete all as specified and as directed. |
| 78 | M&L for sub main wiring along with earth wire of size two run of 2.5 sq mm + one run of 2.5 Sq mm earth wire single core PVC insulated cable with stranded copper conductor FRLS including drawing into 25 mm rigid non-metalic PVC condute on surface of wall/roof complete all as specified and directed. (Note Three run of 2.5 Sqmm including one run of 25 mm of size PVC(medium grade) condute shall be measured as one unit length). complete all as specified and directed. |
| 79 | Supply and fixing of Sheet metal enclosure double door MCB DB with DP MCB as incomer and SP MCBs as outgoing,Phosphatised Powder Painted,240V AC rated 4-way with 200A rated bus bar, concealed mounting in wall, complete with all connections,testing and commissioning all as specified and as directed. |
| 80 | Supply and fixing of 240V, 10KA 'C' curve miniature circuit breaker (MCB) of DP 6-32 Amp rating in the MCB DB including connection, testing and commissioning complete all as specified and as directed. |
| 81 | Supply and fixing of 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SP 6-32 Amp rating in the MCB DB including connection, testing and commissioning complete all as specified and as directed. |
| 82 | Supply and fixing exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm including all fixing arrangement complete all as specified and as directed. |
| 83 | M&L for GI tubing 25 mm dia Medium grade with all fittings laid in trenches or fixing in wall, all as specified an directed. |
| 84 | M&L for GI tubing 20 mm dia Medium grade with all fittings laid in trenches or fixing in wall, all as specified an directed. |
| 85 | Supply and Fix Rotational moulded poly-ethylene water storage tanks (cylindrical vertical closed top) 500 Lts Capacity icluding suitable outlet tank ipple and locking arrangements hoisted and fixed in position all as specified and directed. |
| 86 | Cutting , screwing, threding and fixing GI tubing for alteration or addition size of 25/ 32 mm dia GI tubing all as speciied and directed by engr in charge. |
| 87 | S&F for Gun metal gate valve, with iron wheel head, screwed both ends for iron pipe and fixed suitable for 25 mm dia GI tubing all as specified. |
| 88 | S&F for Gun metal gate valve, with iron wheel head, screwed both ends for iron pipe and fixed suitable for 20 mm dia GI tubing all as specified. |
| 89 | M&L for providing hardcore of gauge n exc 63mm,deposited ,spread and levelled in layers n exc 20 cm thick,watered and rolled/rammed to a true surface including filling of moorum/red bajri all as specified and as directed by Engr in charge. |
| 90 | M&L for cement concrete 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) as in foundation, filling and mass concrete including finished even and smooth (without using extra cement complete all as directed. |
| 91 | M&L for providing Pre-cast cement concrete block masonry with solid blocks, exc. 10cm in width and setting in mortar 1:6 using precast cement concrete block 1:3:6 type C1 using 20 mm graded stone agg all as specified and directed. |
| 92 | M&L for 15mm thick rendering in cement mortar 1:6 on fair faces of brick or concrete surfaces,rendering finished even and smooth (Without using extra cement ) complete all as specified and directed. |
| 93 | S & F of PVC float valves high pressure with polythene float and flynuts complete screwed for iron pipe or PVC ferrule and fixed of size 25mm bore in repairs. Please Enable Macros to View BoQ information |
| 94 | S & F of PVC float valves high pressure with polythene float and flynuts complete screwed for iron pipe or PVC ferrule and fixed of size 25mm bore in repairs. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysJul 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender