Tender For Repair / Replacement Of Light Fitting, Distribution Box, Sub Main Wiring And Other Allied Works At Cqa (Sv) Under Ge Dehu Road
Tender Value
45 Lakhs
Estimated cost
Bid Submission
22 Jul 2026
15 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pune → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair / Replacement Of Light Fitting, Distribution Box, Sub Main Wiring And Other Allied Works At Cqa (Sv) Under Ge Dehu Road
BOQ
| Sl. No. | Item Description |
| 1 | M & L for taking down unserviceable Meter box including all fittings and fixture complete.supply and installed meter box made with PVC heat radiant suitable for fixing electric meter 04 Nos and one MCCB 100 Amps TPN as incommer,Four out going MCB SPN 40 Amps ,IP-65 fitted with 04 no copper strip of size 30x6mm included necessary connection arrangement with suitable size of copper flexible cable from MCCB to Busbar and Busbar to MCB,Meter complet all as directed. .Make : Hensel.Cost included the MCCB,MCB Busbar,The existing meter will installed in the meter box. |
| 2 | Supply and installed outdoor main control box pillar box cannopy type with IP-55 protection,fabricated with 3.15 mm sheet of size 650mm x 600mm x275mm with 40mm angle iron fram 300 mm from ground leave, suitable for installed arrangement 160 Amps MCCB as incommer,out going 63-04 Nos with copper busbar made with 30mmx6mm copper strip on distribution board having front opening with proper locking arrangement size of the panel 600mm width,650mm hight and 275 mm width, complete all as specified and directed. Note: (a) MCCB/MCB will measure in respective items of schele \\"A\\". (b) Rate included the Copper bus bar. |
| 3 | M & L for taking down carefully copper/aluminum point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, sockets, light fittings,outlet boxes etc.removing material for taking credit and making good disturbed surfaces with match colour of walls, floors, ceilings etc all as specified. |
| 4 | M&L for consealed point wiring complete with 1.5 Sqmm two single core multistranded copper conductor FRLSH PVC insulated and unsheathed cable 1100 V grade confirming to IS 694 drwan through PVC conduit of suitable size heavy grade ISI marked including necessary conduit accessories, sunken type pressed steel terminal boxes with plastic laminated sheet of approved shade 3mm thick including 1.5 mm PVC insulated FRLSH copper conductor as in continious earth wire for: |
| 5 | (a) One Light/Bell point controlled by one switch . |
| 6 | (b) One ceiling / Exhaust fan point controlled by one switch |
| 7 | (c) One Light controlled by two-way switch . |
| 8 | (d) One 3 pin 5 Amps socket outlet on independent board |
| 9 | (e) One 3 pin 5 Amps socket outlet on same board |
| 10 | All as per item No-4 above but with 2.5 Sqmm wire for 15 Amp socket outlet on independent board. |
| 11 | Supply and fixing Modular switch 1 way 6A,1 modul, 220 V. Make : Legrand,Crobtree,Anchor Roma,Havells. |
| 12 | Supply and fixing Modular socket 6A-2/3 pin combined 2 modulas flush type 220 V Make : Legrand,Crobtree,Anchor Roma,Havells. |
| 13 | Supply and fixing for repairing Modular switch 2 way 6A,1 modul, 220 V. Make : Legrand,Crobtree,Anchor Roma,Havells. |
| 14 | Supply and fixing for repair Modular Bell Push 6A,1 Module single pole 220 V. Make : Legrand,Crobtree,Anchor Roma,Havells. |
| 15 | Supply and fixing Modular socket combination 6A/16A-2/3 pin combined 2 moduls flush type 220 V .Make : Legrand,Crobtree,Anchor Roma,Havells. |
| 16 | Supply and fixing Modular Switch 1 way 16/20 amp 1 modul, 220 V .Make : Legrand,Crobtree,Anchor Roma,Havells. |
| 17 | Supply and fixing Modular Switch socket combination 2 in 1,3 pin,5A and flush type 220 V .Make : Legrand,Crobtree,Anchor Roma,Havells. |
| 18 | Supply and fixing Modular Switch socket combination multipurpose 3 pin,16 amp and one pin 6amp controled by one switch.fush type 220 V .Make : Legrand,Crobtree,Anchor Roma,Havells. |
| 19 | Supply and fixing Modular fan regulator stepped type Electronics regulator flush type on the existing 120 watts,220 volt, 2 moduls and connecting complete all as specified and directed .Make : Legrand,Crobtree,Anchor Roma.Havells. |
| 20 | Supply and fixing Modular white cover plate with frame suitable for 1 modul. Make : Legrand,Crobtree,Anchor Roma,Havells. |
| 21 | Supply and fixing Modular white cover plate with frame suitable for 3 modul.Make :Legrand,Crobtree,Anchor Roma,Havells. |
| 22 | Supply and fixing and fixing Modular white cover plate with frame suitable for 4 modul.Make : Legrand,Crobtree,Anchor Roma,Havells |
| 23 | Supply and fixing Modular white cover plate with frame suitable for 6 modul. Make : Legrand,Crobtree,Anchor Roma,Havells. |
| 24 | Supply and fixing Modular white cover plate with frame suitable for 8/12 modul. Make : Legrand,Crobtree,Anchor Roma,Havells. |
| 25 | Supply and fixing Modular Metal flush box suitable for 1/2 modul.Make :Legrand,Crobtree,Anchor Roma,Havells. |
| 26 | Supply and fixing Modular Metal flush box suitable for 3 modul. Make : Legrand,Crobtree,Anchor Roma,Havells. |
| 27 | Supply and fixing Modular Metal flush box suitable for 4 modul. Make : Legrand,Crobtree,Anchor Roma,Havells. |
| 28 | Supply and fixing Modular Metal flush box suitable for 6 modul.Make : Legrand,Crobtree,Anchor Roma,Havells. |
| 29 | Supply and fixing Modular Metal flush box suitable for 8/12 modul.Make :Jaquar, Legrand,Crobtree,Anchor Roma,Havells. |
| 30 | M&L for casing capping point wiring complete with 1.5 Sqmm two single core multistranded copper conductor FRLSH PVC insulated and unsheathed cable 1100 V grade confirming to IS 694 drwan through PVC casing capping of size heavy grade ISI marked including necessary casing capping with accessories, heavy duty PVC terminal including 1.5 mm PVC insulated FRLSH copper conductor as in continious earth wire for: |
| 31 | (a) One Light/Bell point controlled by one switch . |
| 32 | (b) One ceiling / Exhaust fan point controlled by one switch |
| 33 | (c) One Light controlled by two-way switch . |
| 34 | (d) One 3 pin 5 Amps socket outlet on independent board |
| 35 | (e) One 3 pin 5 Amps socket outlet on same board |
| 36 | All as per item No-25 above but with 2.5 Sqmm wire for 15 Amp socket outlet on independent board. |
| 37 | Supply and fixing for repair Bell Push flash type,5A,single pole 220 V. Make: Anchor or equivalent. |
| 38 | Supply and fixing and fixing switch piano flush button single pole one way 6 Amps, 220 V. Make: Anchor or equivalent. |
| 39 | Supply and fixing switch piano flush button single pole Two way 5 Make: Anchor or equivalent.Amps, 250 V |
| 40 | Supply and fixing socket outlet 2 in 1,3 pin,5A flush type 220 V . Make: Anchor or equivalent. |
| 41 | Supply and fixing socket 6A/16A-2/3 pin combined flush type 220 V .Make: Anchor or equivalent. |
| 42 | Supply and fixing switch outlet 2 in 1,3 pin,6A and 16 Amp flush type 220 V .Make: Anchor or equivalent. |
| 43 | Supply and fixing switch outlet 2 in 1,3 pin,5A and 15Ampa flush type 220 V .Make: Anchor or equivalent. |
| 44 | Supply and fixing for repairing Ceiling rose, surface bakelite, 65mm x 50mm two to three terminals.Make: Anchor or equivalent. |
| 45 | Supply and fixing switch socket combination 2 in 1,3 pin,6A and flush type 220 V .Make: Anchor or equivalent. |
| 46 | Supply and fixing Switch socket combination 2 in 1,3 pin,6 and 16 Amp flush type universal type 220 V . Make: Anchor or equivalent. |
| 47 | Supply and fixing Electronics dimmer piono switch type 450 watts,220 volt flush type. all as specified and directed .Make: Anchor or equivalent. |
| 48 | Supply and fixing PVC rectangular block for mounting,switches,sockets, fan regulator etc with 3mm thick plastick laminated sheet cover of size 100 mmx 100mm and 50 mm deep. |
| 49 | Supply and fixing PVC rectangular block for mounting,switches,sockets ,fan regulator etc with 3mm thick plastick laminated sheetbcover of size 175 mmx 100 mm and 50 mm deep. |
| 50 | Supply and fixing PVC rectangular block for mounting,switches,sockets, fan regulator etc with 3mm thick plastick laminated sheetbcover of size 200 mmx 150mm and 50 mm deep. |
| 51 | Supply and fixing PVC rectangular block for mounting,switches,sockets, fan regulator etc with 3mm thick plastick laminated sheetbcover of size 250 mmx 200mm and 50 mm deep. |
| 52 | Supply and fixing buzzer,Ding Dong AC 230 volts single pole. |
| 53 | Supply and fixing and fixing bell multi musis AC 230 volts single pole. |
| 54 | Supply and fixing and fixing for repairing lamp holder,PVC/Polycar bonate type with back plate suitable for batten fitting Make: Anchor or equivalent. |
| 55 | Taking down unserviceable sub main wiring of any size complete and making good disturbed surface with match colour of walls/floors etc complete as specified. |
| 56 | M & L submain wiring with two single core through PVC insulated unsheathed stranded copper conductor 4 sqmm (nominal area) drawing through PVC coundit consil and 4 sqmm stranded copper conductor cable PVC insulated and unsheathed (green colour) 1100 volts grade for earth continuity conductor and connecting with main earth dolly (Note : Cutting chases for counduit and sinking\\"s for boxes and makeing good to walls ,floors etc for sub main wiring will be measured & paid separately in respective items). |
| 57 | All as per item no 46 herein before but of size 2X2.5 sq mm and 1X2.5 sqmm |
| 58 | M & L submain wiring with two single core through PVC insulated unsheathed stranded copper conductor 2.5 sqmm (nominal area) drawing through PVC capping casing and 2.5 sqmm stranded copper conductor cable PVC insulated and unsheathed (green colour) 1100 volts grade for earth continuity conductor and connecting with main earth dolly(Note : Cutting chases for counduit and sinking\\"s for boxes and makeing good to walls ,floors etc for sub main wiring will be measured & paid separately in respective items). |
| 59 | All as per item no 48 herein before but of size 2X 4 sq mm and 1X4 sqmm |
| 60 | All as per item no 48 herein before but of size 2X6 sq mm and 1X6 sqmm |
| 61 | Supply and fix single pole and sheet metal enclosure with three pin socket and plug top and 20 amp single pole MCB complete all as specified and directed . |
| 62 | M & L for repair the point wiring of any type of fault such as short circuit/sparking/Losse connection/fluctuation in light, fan, socket and power point as per directed by department ,rectification of fault by deploying resource with all tools & plants, telescopic ladder, gaskets safety arrangements and including providing minor materials after taking down the unserviceable casing/conduit/wire and reconnection/relaying in same place and also make good the distrubed surface by contractor to make light serviceable within same day after receving complaint from department . Note: 1.Neccessary cable/casing/conduit for wiring will be measured and paid seperatebly in respective items.2.Each Job consist of 20 number of complaint |
| 63 | Taking down carefully by unscrewing from boards/outlet boxes,fittings and fixtures such as switches,sockets,celling roses,lamp holders,brackets,ceilling fittings,bulkhead fittings,tube light fittings and regulators etc for reuse at site or carrying to store (To be measured only found services) |
| 64 | Supply and fixing and fixing and fixing of Driver for LED Ceilling light 18/36/40 watt .Make:-Havells,,Philips ,wipro |
| 65 | Supply and fixing Surface mounted full lit luminaire with uniform illumination .long lige & less maintenance, 1 X 1 LED 24 W Make :- Crompton,Philips , Havells . |
| 66 | Supply and fixing Slim recess mounting luminaire with Strato 2x2 LED 36 watt edge-lit luminaire suitable for armstrong/grid ceiling complete for low ceiling applications complet all as directed.Havels all as directed. Make:- Jaquar ,Crompton,Philips , Havells . |
| 67 | Supply and fixing Slim recess mounting luminaire with edge Pro Round The Edgepro range of Slim-Fit low profile downlights LED 18 watts, suitable for mounting with Armstrong/Grid ceiling all as directed all as directed. Make:- Jaquar ,Crompton,Philips , Havells . |
| 68 | Supply and fixing ceiling fitted luminaire with octane Plus 2x2 Panel LED 36 watt edge-lit luminaire suitable for armstrong/grid ceiling complete for low ceiling applications complet all as directed.Havels all as directed.Make:-Benlo,Havells,Bajaj,Philips |
| 69 | Supply and fixing LED Surface mounting General Purpose aluminium battens 18/20 W,4 feet with best in class Luminaire Efficacy. These Extruded Aluminium housing battens are equipped with high specifications CISPR 15 compliant Electronics driver and Milky white, special polycarbonate diffuser, for glare free efficient light distribution. THD: <10% Make:- Crompton,Philips , Havells . |
| 70 | Supply and fixing Inverter LED batten 20 watt with square profile and polycarbonate channel. Lithium Ion battery with charging time 8 hours-10 hours and back up time upto 4 hours Make:- Crompton,Philips , Havells . |
| 71 | Supply, fixing, connecting and testing in replacement integral LED building security light fitting, 45 watts with dusk to down sensor ,energy saving & environmental friendly long life versatile pressure die cast aluminium body with clear toughened glass with over voltage protection,short circuit protection ,open circuit protection ,surge protection ,LED CCT is 5700 K and IP-66 as light source suitable making connection with three core PVC insulated and sheathed copper conductor cable of size 1.5/2.5 Sqmm complete all as specified and directed .Make:-Crompton,Philips , Havells . |
| 72 | M & L for taking down unserviceable light fitting,Supply and fixing Integra Neo (Surface) Surface mounted down LED 18 watt light fitting with white powder coated polycarbonate decorative housing and pressure die-cast heat sink having high efficiency with heavy duty driver .Make:- Crompton,Philips , Havells . |
| 73 | M & L for taking down unserviceable light fitting,Supply and fixing Edge Pro square the edgepro range of Slim-Fit low profile downlights 18 watt Ceiling cutout: 210x210 mm, height 16 mm for 18 W. Make:- Crompton,Philips , Havells . |
| 74 | M & L for taking down unserviceable DB/MCCB/MCB of any capacity and making good disturbed surface of wall/floor complete all as specified all as directed. |
| 75 | S & F Distribution board, SP&N , Prewired ,Netural links,blanking plates ,duoble door 8 way, with provision for MCB SP&N as incommer and SP/DB MCB as outgoing and electrically connecting up complete all as specified and directed.Make : L&T/Havells / Legrand |
| 76 | S & F Distribution board, SP&N , Prewired ,Netural links,blanking plates ,duoble door 12 way, with provision for MCB SP&N as incommer and SP/DB MCB as outgoing and electrically connecting up complete all as specified and directed. Make : L&T/Havells / Legrand |
| 77 | S & F Distribution board, VTPN , Prewired ,Netural links,blanking plates ,double door 12 way, with provision for MCB TPN as incommer and SP/ DP MCB as outgoing and electrically connecting up complete all as specified and directed.Make : L&T/Havells / Legrand |
| 78 | S & F MCB SP 6 to 32 Amps 240 volts 50 HZ having 10 KA complete.Make : L&T/Havells / Legrand |
| 79 | S & F MCB DP 40 Amps 240 volts 50 HZ having '10 KA complete.Make : L&T/Havells / Legrand |
| 80 | S & F MCB TPN 40 / 63 Amps 240 volts 50 HZ having 10 KA complete.Make : L&T/Havells / Legrand |
| 81 | S & F MCCB ,415 Volt AC 50HZ 125 Amps , adjustable braking capacity 10KA complete all as directed.Make : L&T/Havells / Legrand |
| 82 | M&L Rendering 10 mm thick in cm 1:4 on other than fair faces of brick work or concrete surfaces. |
| 83 | Supply ,laying ,commossionong,testing in repair UG cable 50 Sq mm x 3.5 core ,XLPE insulated screened PVC bedded ,galvanized steel strip or wire armoured ,electric power cable heavy duty 1100 volts grade with stranded aluminum conducter including taking down U/S cable all as directed and specified- Make :- Gloster/ Polycab/Havells. |
| 84 | All as per item no-73 here in before but size of cable 10 Sqmm x 4 Core all as directed. |
| 85 | All as per item no-73 here in before but size of cable 16 Sqmm x 4 Core all as directed. |
| 86 | All as per item no-73 here in before but size of cable 25 Sqmm x 4 Core all as directed. |
| 87 | Supply and laying GI tubing 50 mm dia light grade for cable protection all as directed.. |
| 88 | Excavation in trenches Soft / loose soil not exceeding 1.5m wide and not exceeding 1.5 m in depth and getting out all as specified and directed. |
| 89 | Returning, filling in soil, including spreading, leveling watering and well ramming in layers not exceeding 25 cm all as specified and directed. |
| 90 | Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point of any type of excavation all as specified and directed. |
| 91 | Supply and laying of 40 mm outer dia ,double wall corrugated (DWC) duct pipe conforming to IS 16205 (Part 24) with antirodent and non flame propogating properties of approved colour complete with fittings for cable protection all as specified and as directed. |
| 92 | M&L for earthing complete with galvanized steel pipe electrode,40mmbore,medium grade,2.5 Mtrers length,buried directly and preferably vertically in ground with top edge not less than 1.25 meters below ground leavle connected with earthing lead of 4mm dia galvanised iron or steel wire all as shwn in Plate no-2 to the earthing test point all as specified and indicated including testing on completion. |
| 93 | Supply and fixing BLDC ceilling fan complete with blades, down rods,electronic regulator and accessories,230 volt,1200 mm sweep, min air delivery 220-230 CFM with service value 5.00 BEE star rated with brushless direct current motor Make : Crompton/Bajaj/Havells |
| 94 | M & L for taking down unserviceable Exhaust Fans and deposited to MES store yard , Supply and fixing exhaust fan made with sturdy engineering plastic complet and accessories,230 volt,50 Hz,rpm copper winding of sweep 150 mm.Make Crompton/Bajaj/Havells |
| 95 | M & L for taking down unserviceable Exhaust Fans and deposited to MES store yard,Supply and fixing exhaust fan made with sturdy engineering plastic complet and accessories,230 volt,50 Hz,rpm copper winding of sweep 200 mm. Make Crompton/Bajaj/Havells |
| 96 | M & L for taking down unserviceable Exhaust Fans and deposited to MES store yard,Supply and fixing exhaust fan made with sturdy engineering metal body complet and accessories,230 volt,50 Hz,rpm copper winding of sweep 230 mm.Make Crompton/Bajaj/Havells |
| 97 | Supply and fixing and fixing only condenser 2.5 Mfd/3.5 Mfd capacity |
| 98 | M & L for taking down the ceilling fan/wall mounted fan,Exhust fan from ceilling,wall,cleaning the dust,drit ,greashing,serviceing ,repairing and refixing the original positin all as directed. Note:- Necessary spare for repairing will be measured and paid in respective items. |
| 99 | M & L for rewinding ceilling fan with super enameled copper wire with existing gauge to get designed condition of speed for the particular make of fan including insulating, varnishing, providing sleeves to copper wire and testing for good running condition of sweep1200 mm ,220 volt ,50 HZ,single phase, as obtain from item no 88 her in before all as directed and specified |
| 100 | M & L for rewinding ceilling fan with super enameled copper wire with existing gauge to get designed condition of speed for the particular make of fan including insulating, varnishing, providing sleeves to copper wire and testing for good running condition of sweep 200/250/300/400 mm ,220 volt ,50 HZ,single phase, as obtain from item no 88 her in before all as directed and specified |
| 101 | Supply & fixing Gun metal bush suitable for particular make of fan of 1200mm sweep complete all as directed and specified |
| 102 | Supply & fixing Gun metal bush suitable for particular make of exhaust fan of 200/250/300/400 mm sweep complete all as directed and specified |
| 103 | Supply & fixing ball bearing suitable for particular make of fan of 1200 mm sweep complete all as directed and specified.Make for Bearing - NBC/Tata/SKF |
| 104 | Supply & fixing ball bearing suitable for particular make of exhaust fan of sweep200/250/300/400/450 mm complete all as directed and specified Make -SKF/NBC/SKF Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysJul 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender