Tender For Repair/ Maintenance Of Wall Plaster, Flooring, Tiling, Joinery And Other Allied Works In Sunder Ji Enclave, Carriappa Enclave, Bc Joshi, Ved Vihar, Vaidhya Enclave Etc Md Officers Accn Area Under Age B/R-1 Of Ge (North) Meerut Cantt
Tender Value
Ref. Documents
Estimated cost
Bid Submission
22 Jul 2026
14 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Meerut → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/ Maintenance Of Wall Plaster, Flooring, Tiling, Joinery And Other Allied Works In Sunder Ji Enclave, Carriappa Enclave, Bc Joshi, Ved Vihar, Vaidhya Enclave Etc Md Officers Accn Area Under Age B/R-1 Of Ge (North) Meerut Cantt
BOQ
| Sl. No. | Item Description |
| 1 | Demolition brick work or stone/ boulder masonery built in cement mortar including all quoins , pillars etc Complete all as specified and directed. |
| 2 | M&L for brick work using sub class ‘B’ old size bricks, straight or curved on plan exceeding 6m mean radius, built in CM (1:6) Complete all as specified and directed. |
| 3 | M&L for old size brickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 except bricks Complete all as specified and directed. |
| 4 | Taking down cement plaster of any description on brick or stone walls, etc. including racking out joints, hacking for key, scrubbing down with water etc.&removing rubbish to a disance not exc 250m Complete all as specified and directed. |
| 5 | M&L for 15 mm thick rendering in CM 1:4 on fair faces of brick or concrete surfaces finished even and smooth (without using extra cement) complete all as specified & directed.Note:- Water proofing compound shall be measured and paid seperately. |
| 6 | Supply only integral water proofing compound complete all as specified & directed. |
| 7 | M&L for applying Two coats of 100% Premium acrylic emulsion paint over 2mm thickness putty, having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces using roller for painting Complete all as specified and directed. |
| 8 | M & L for 15 mm thick in cement mortar 1:6 on faces of brick work or concrete surfaces, surface finished even & smooth with using extra cement complete all as specified and directed. |
| 9 | M&L for preparation of newly plastered surfaces of wall and applying two coat of oil bound distemper over a coat of primer complete all as specified and directed |
| 10 | M&L for 2 mm thick applying a layer of JK/ Birla putty on wall surfaces including cornics etc for proper levelling of plaster complete all as specified and directed. |
| 11 | M&L for rendering 5 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:3 and finished even and smooth in ceiling without using extra cement complete all as specified & directed. |
| 12 | M&L for preparing newly plastered ceiling surfaces and applying three coat of white wash on undecorated surface complete all as specified and directed. |
| 13 | M&L for preparation of Complete removal of existing treatment plastered old surface of of wall by applying 2mm thick wall care putty and making the surface smooth Finishing walls and applying Acrylic Smooth exterior paint of required shade (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)using roller for painting complete all as specified and directed. |
| 14 | M&L for complete removal of existing treatment , plastered or un-plastered surfaces of walls and applying two coats of oil bound distemper white or tinted over a coat of primer complete all as specified and directed. |
| 15 | M&L for preparation of old decorated surfaces of wall and applying one coat of white wash complete all as specified and directed. |
| 16 | M&L for preparation of old decorated surfaces of plastered or un-plastered surfaces of ceiling and applying one coat of white wash complete all as specified and directed. |
| 17 | Taking down wooden chowkhat or frame area not exc 1.5 sqm each with shutter (without taking off shutter from frame) Complete all as specified and directed. |
| 18 | Taking down wooden chowkhat or frame area exc 1.5 sqm and not exc 4 Sqm each with shutter (without taking off shutter from frame) Complete all as specified and directed. |
| 19 | Taking down shutters ( per leaf ) of any description exc 1 Sqm but not exc 2 Sqm each complete all as specified and directed. |
| 20 | S & F 30 mm thick Second class hard wood Glazed and skeleton door shutters, open rebated and prepared to receive gauze without sash bars, edges of framing plain fitted with cut and mitred beads for securing wire mesh or glass, size of members of shutter as specified in SSR Pt-I Sec-8 clause 8.24(a) fitted to chowkats, complete as specified and directed. |
| 21 | S&F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified & directed. |
| 22 | Factory made single extruded WPC (wood polymer Composite) solid door/ window/ Ceosetory window & other Frames/ Chowkhat of size 45 x 70 mm comprising of PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wwod powder/ rick husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms ) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded stat headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N / mm 2 and resistance to spread of flame of Class A catogory with property of being termite/ borer proof, water / moisture proof and fire retardant and fixed in position with MS hold fast/lugs / SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). |
| 23 | Factory made single extruded WPC (wood polymer Composite) solid plain flush door shutter of 35 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/ cum and screw withdrwal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N mm2 modulus of elasticity 850 N / mm2 and resistance to spread of flame of Class A catogary with property of being termite/ borer proof, water/ moisture proof and fire retardanat and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws, all as per direction of Engineer-In-Charge (Note:- stainless steel butt hinges and necessary SS screws shall be paid separately. |
| 24 | S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed. |
| 25 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet reinforced with M.S Square tube complete all as specified and directed. |
| 26 | M & L for Anodised aluminium Powder Coated (of Approved colour ,Thickness or powder coating not less than 50 micron) door Shutter , side hung type without sash bars, aluminium sections weighing 0.55 kg/m including frame of chowkhats, necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium Complete fittings and 5mm glass as required complete all as specified and directed. |
| 27 | M & L for Anodised aluminium Powder Coating of Approved colour (Thickness or powder coating not less than 50 micron) sliding window and ventilator shutters, sliding type(Three track) without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium and Sliding Arrangement, including 4mm glass Complete fittings as required complete all as specified. |
| 28 | S & F butt hinges, medium weight, Mild steel and fixed, size of hinges 100mm complete all as specified and directed. |
| 29 | Supply and fix 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy complete all as specified and directed. |
| 30 | S & F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 31 | S & F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section Complete all as specified and directed. |
| 32 | S & F 30 mm flaps Continuous (piano) hinges, mild steel, bright finish or electrogalvanised Complete all as specified and directed. |
| 33 | M & L for painting to new wood and wood based surfaces of any description, over 10 cm in width or girth, not otherwise described with two coats of synthetic enamel paint over a coat of pink primer including preparation of surfaces Complete all as specified and directed. |
| 34 | Dismantaling asbestos cement sheets(corrugated, semicorrugatd) in roof coverings complete all as specified and directed. |
| 35 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strenth of 550 Mpa as in roof covering / clading to waall , fixed self tapping screws complete all as specified and directed. |
| 36 | S&F Pre-painted galvatume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of an colour having tensile strenth of 550 Mpa as in roof covering / clading to waall , fixed self tapping screws complete all as specified and directed. |
| 37 | Dismantling mild steel or wrought iron work in roof trusses, gratings etc and similar work Complete all as specified and directed. |
| 38 | M&l for Dismatling timber scantling 40 sqcm and above in any position ,unframed work complete all as specified and directed |
| 39 | M&L for mild steel work in roof trusses,purlins,rafters,wind ties,crane gantries,posts,rails and fastenings and heavy bracket framing (Beam,Tee,Angle,Channel or Flat sections) including distance pieces,cleats etc complete all as specified and directed. |
| 40 | M&L for Framed work such as grills, angle grating etc. with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, railings and similar work confirming to Fe-410-O or Fe-310-O, Complete all as specified and directed. |
| 41 | M&L for preparation of new steel and iron surfaces of any description, over 10 Cm in width or girth, not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide premier complete all as specified and directed. |
| 42 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as directed. |
| 43 | S&F Vitrified Ceramic tiles light shade 8 to 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.18 Sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement over 15mm screed bed in CM 1:6 complete all as specified and directed. |
| 44 | S&F Vitrified Ceramic tiles light shade 8 to 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.18 Sqm but not exceeding 0.36 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement over 10mm thick rendering in CM 1:4 complete all as specified and directed. |
| 45 | M & L for non skid ceramic coloured /printed tiles 7 to 8 mm thick (square / Rectangular)area of each tiles exceeding 0.11 sqm but not exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match the tiles, laid over screed bed or bedding layer 15mm thick in cement mortar(1:6) for laying floor finishes Complete all as specified and directed. |
| 46 | M & L for glazed ceramic coloured / printed tiles 450mm x 300mmX7mm thick, on vertical surfaces set and jointed in neat cement slurry and pointed in white/coloured cement to match the tiles,over rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 for backing of Dado/ Skirting & vertical Tiles complete all as specified and as directed. |
| 47 | Dismantling of stone slabs and tiles of any description or thickness in floors, aprons laid, bedded and pointed in mortar complete all as specified & directed. |
| 48 | M&L for Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in 10mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified & directed . |
| 49 | Dismantling of wall and ceiling boards (fiber, pulp, insulation etc,) or insulation boards/slabs/blankets, any thickness including cover fillet complete all as specified and directed. |
| 50 | S & F for Aluminium anodised snap grid frame work for false ceiling comprising of following section for making partitions of 605 X 605 mm size fixed to walls with rawl plugs and screws and hang to roof with s 6 mm dia. G.I. (upto 1200mm length) adjusting levelfixed to roof slabs by means ofceilling cleats made out of G.I.flat 40 x 3 mm size 60mm long and expansion hold fasteners12.5mm dia. 40mm long Complete all as specified and directed. size of main tee shall be :-(i) 36.5mmx25mmx1.4mm thick, Weighing 0.24Kg/Rm(ii) Cross Tee 23.5mmx36.4mmx1.4mm thick Weighing 0.191 Kg/Rm and (iii) Wall angle 40mmx25mmx2mm thick. Weighing 0.36 Kg/Rm |
| 51 | S & F 4 mm thick non asbestos fiber designer ceiling (E-board classic) board / tiles for insulation and accoustic purpose, 600 X 600 mm size fixed in ceiling with and including dusting of surface complete all as specified and directed |
| 52 | M&L for in repair, 18/19mm thick Soild WPC board, exterior grade, prelaminated one side with decorative choice laminations and other side balanceing white lamination, fixed with screws to WPC frame work in cup boards, rebated or flat edged fancy handle , Magnite lock complete all as specified and directed. |
| 53 | M&L for solid PVC wall lining consisting of 5.00mm thick single site prelam PVC sheet inclusive of insolvent cement and fixing at site on PVC frame complete all as specified and directed |
| 54 | S&F 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC frame complete all as specified and directed |
| 55 | S&F in repair 5mm thick hollow PVC Sheet wall Panelling (sand wiched between the longitudinal grid in PVC Sheet) any pattern fixing at site with PVC beading/fillet complete all as specified and directed |
| 56 | Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness.(below or above ground level) Complete all as specified and directed. |
| 57 | M&L 75 mm thick cement concrete 1:4:8 type D-2 finished fair and even as in sub base Complete all as specified and directed. |
| 58 | M&L for chequred cement concrete tiles of size 300x300x25 mm thick coloured rubber pressed glossy finish, set and jointed in neat cement slurry and pointed in grey cement and no pigment in foor/steps, over 15 mm thick screed bed or bedding layer in CM 1:6 complete as all specified and directed. |
| 59 | M&L for Sand filling under interlocking tiles or in foundations including watering and consolidation complete all as specified and directed |
| 60 | M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade with grey cement complete all as specified and directed |
| 61 | M&L for Providing cement concrete type B-1, 1:2:4 (using 20mm graded aggregate) as in copings,platform,kerbs etc including weathering, slightly rounded or chamfered angles and throating Complete all as specified and directed. by Engineer-in-charge |
| 62 | Taking down old existing water proofing treatment from the top of RCC/ arch slab, including taking down existing PCC padding or plaster and hacking the top of RCC slab, cleaning with water and disposal of rubbish off the premises complete all as specified & directed. |
| 63 | M&L for nominal mix concretes 1:2:4 type B-O(using 12.5 mm graded stone aggregates) as in padding on roof finished even and fair without using extra cement all as specified and directed. |
| 64 | M&L for 10mm thick cement paster in CM 1:4 mixed with WPC @ 2 % by weight of cement finised even and smooth without using extra cement on roof surface when concreate is green and wall (WPC will be measured and paid seperately as supply only rate) Complete all as specified and directed. |
| 65 | M&L for cleaning of concrete or plastered surfaces of roof and applying priming coat using with bituminous primer @ 0.30kg per Sqm followed evenly by a tack coat @ 1.20 kg per Sqm using 85/25 grade industrial hot blown bitumen , over it laid with 3mm thick APP modified polymeric water proofing membrane reinforced with non-woven polyester fabric (weight not less than 160 Gm per Sqm) unrolled & bonded to substrate with side and end laps 75mm & 100mm as per manufacturer’s instruction and applying over it a tack coat using 85/25 grade industrial hot blown bitumen bitumen @ 1.20 kg per Sqm and finally finished the top of polymeric water proofing membrane with a coat of bituminous aluminum paint @ 0.20 kg per Sqm as per manufacturer’s instructions, complete all as specified & directed. (including existing water tank on roof disconnected and after cleanig same position connecting) |
| 66 | M&L for sunken floor treatment as under:- (i) The sunken portion shall be tested for leakage / seepage / dampness by ponding with water for 72 hours. In case any defect is noticed, the defective portion shall be grouted with cement slurry mixed with suitable chemical & tested again. The process of grouting and testing shall be repeated till leakage/ seepage/ dampness is eliminated.(ii) Demolition of cement concrete of any description and in any position not otherwise specifically provided for in any type of filling in sunken portion & cleaned the sunken potion including vertical wall surface complete all as directed.(iii)Laying of 40mm thick (Min) PCC (1:2:4) type B-0 using 12.5 mm graded stone aggregate with integral water proofing compound as per manufacturer instructions on bottom of sunken portion with proper slope towards spout. Vertical sides shall be plastered in CM (1:3), 15 mm thick mixed with water proofing compound as per manufacturer instructions. Plaster shall be extended over PCC coving when the same is green i.e. PCC & plaster be carried out at the same time complete all as specified and directed.(iv) After laying sewage/ plumbing pipes with fixtures in position, 2 coats of OMIPLAS EP-101 epoxy compound shall be applied complete all as specified and directed.(v) Testing again of water tightness by ponding for 72 hours & rectifying defects if any till total elimination of defects complete all as specified and directed.(vi) M&L to fill the sunken floor with PCC ( 1:5:10) type E-2 using 40mm graded brick aggregate over the treated surface complete all as specified and directed.(vii) Provinding spouts of 25mm dia GI pipe light grade projecting 450mm from clear outer suraface of wall with mosquito proof cap on inner face of pipe shall be provided to drain out seepage water, including cutting holes and making good if needed complete all as specified and directed. |
| 67 | S&F in repairs angle/stop valves, cast copper alloy, fancy type chromium plated , screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed for 15mm bore dia of pipe Complete all as specified and directed. |
| 68 | S&F in repairs angle/ stop valves, cast copper alloy, fancy type chromium plated with long shank & cup (concealed) , screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed for 15mm bore dia of pipe Complete all as specified and directed. |
| 69 | S & F in repairs vitreous china wash basin, white flat back size 550X400 mm, (flat back or angle back type) including brackets and including cutting for and pinning in ends of brackets or erecting stand, fixed in repairs Complete all as specified and directed. |
| 70 | S & F in repairs 15 mm bore Fancy type pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed Complete all as specified and directed. |
| 71 | S&F in repairs 32mm dia waste fittings, brass, chromium plated for glazed ware sinks, basins, etc with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed Complete all as specified and directed. |
| 72 | S & F in repair bib taps, cast copper alloy, 15 mm dia, Chromium Plated, fancy type with crutch or butterfly handle, screwed down for iron pipe and fixed etc complete all as specified. |
| 73 | S&F in repairs vitreous china squatting pan, 'Orissa' pattern, size 580mm x 440mm, white, with integral foot rests, including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. Complete all as specified and directed. |
| 74 | S&F in repairs vitreous china wash down water closet pan (padestal pattern) with seat cover (excluding fixing bolts, flushing cistern and flush pipe) etc complete all as specified and as directed. |
| 75 | S&F in repairs Cast iron Traps 100 mm P or S with long arm all as specified and directed |
| 76 | S & F in repairs 10 Liters capacity, PVC Valve less, Syphonic action type, low level flushing cistern, white, with inlet ball valve, float, handle, flush pipe of polyethylene of low or high density of PVC, 32mm dia including brackets and connections to pipe complete all as specified and as directed. |
| 77 | S&F in repairs Single Piece WC With PP Soft Close Seat Cover, Hinges, Dual Flush Cistern Fitting, Fixing Accessories And Accessories Set, Size: 360x640x685 mm including replacement of S Trap- 110 mm complete all as specified and directed |
| 78 | S&F in repair 600mmx450mm bevelled edge looking mirror and fixed to wooden plug with CP brass screws and cup washers complete all as apecified & directed |
| 79 | S&F in repairs 75mm dia Cast iron floor trap/Nahani trap with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B1 complete all as specified and directed. |
| 80 | S&F in repairs brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges complete all as specified and directed. |
| 81 | S&F in repairs chromium plated Soap dish fixed to plug with chormium plated brass screws all as specified and directed. |
| 82 | S&F in repairs Chromium plated shower rose 125 mm swivel type, with rod complete all as specified & directed. |
| 83 | S&F in repair PVC connections 15mm dia , 450mm long, , with PTMT nuts & washers at both ends complete all as specified & directed. |
| 84 | S&F in repairs PVC connection 15 mm size with PTMT nuts of length 600mm complete all as specified and directed. |
| 85 | S&F in repairs CP kitchen sink waste coupling of size 100mm complete all as specified and directed |
| 86 | S&F in repair 15 mm dia brass chromium plated Central Hole Basin Mixer with Regular Spout with Popup Waste System with 450mm Long Braided Hoses fancy type with or without lettered 'Hot' or 'Cold' ,with long screwed shanks and fly nut capstan head screwed for 15mm dia pipe fixed complete all as specified & directed. |
| 87 | S&F in repairs Corner glass shelf (with CP bracket) complete all as specified & directed. |
| 88 | S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified & directed. |
| 89 | S&F in repairs sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 90 | S&F in repairs 15 mm dia brass CP wall Mixer with fancy type for mixing hot and cold water with long screwed shanks and fly nut capstan head screwed for 15mm dia pipe fixed complete all as specified & directed. |
| 91 | Dismatling PVC Water tank Exc 250 & n exc 500 ltr and removing from site as specified and directed |
| 92 | S & F Rotational moulded PVC water storage tanks 500 Ltrs capcity three layer (cylindrical vertical with closed top) hoissted and fixed in position all Complete all as specified and directed. |
| 93 | Dismatling PVC Water tank Exc 500 & n exc 1000 ltr and removing from site Complete all as specified and directed. |
| 94 | S & F Rotational moulded PVC water storage tanks 1000 Ltrs capcity three layer (cylindrical vertical with closed top) hoissted and fixed in position all Complete all as specified and directed. |
| 95 | S & F in repairs PTMT ball/float valve 20 mm dia high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule complete all as specified and directed. |
| 96 | Taking up or down 15 mm bore steel tubing and connections, complete all as specified and as directed |
| 97 | All as described item Ser No 96 here-in-before but 20mm bore complete all as specified & directed. |
| 98 | S&F 15 mm bore galvanized steel water tubing, medium grade including necessary fittings such as GI bends, tee, union etc fixed on wall / floor complete and connecting to water supply pipe line complete all as specified and as directed |
| 99 | S&F 20 mm bore galvanized steel water tubing, medium grade including necessary fittings such as GI bends, tee, union etc fixed on wall / floor complete and connecting to water supply pipe line complete all as specified and as directed |
| 100 | Supplying and laying of CPVC pipes 20mm outer dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 101 | S&F in repairs GI nipple 15 mm bore dia for HDPE water tank(Min weight-38 gms) complete all as specified & directed. |
| 102 | S&F in repairs GI nipple 20 mm bore dia for HDPE water tank(Min weight-45 gms) complete all as specified & directed. |
| 103 | S&F in repairs Union brass of 15mm bore dia to connect iron to polyethylene complete all as specified & directed. |
| 104 | S&F in repair Union brass of 20mm bore dia to connect iron to polyethylene complete all as specified & directed. |
| 105 | S&F in repairs Elbow/Tee of 15 mm bore dia brass all ends screwed and fixed complete all as specified & directed. |
| 106 | S&F in repairs Elbow/Tee of 20 mm bore dia brass all ends screwed and fixed complete all as specified & directed. |
| 107 | S & F in repairs 15 mm bore Fancy type Telephonic Shower (Healthfaucet), Cast Copper alloy, with chromium plated, screwed down high pressure with or without lettered Hot or Cold 1.25 mtr long screwed shanks and fly nuts, screwed for iron pipe/stop value and fixed complete all as specified & directed. |
| 108 | S&F in repairs Seat cover for pedestal pan complete all as specified and directed. |
| 109 | S&F in repairs PVC waste pipe 32/40 mm dia suitable for wash basin/sink complete all as specified and directed |
| 110 | S&F in repairs Wall mixer 3-in-1 way telephpnic/Non telephonic long sank 15mm bore, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 111 | S&F in repairs 20mm Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 112 | S&F in repairs 75mm bore PVC (SWR) pipes in any length with rubber ring joints, laid under trenches or floor complete all as specified and directed. |
| 113 | S&F in repairs 110mm bore PVC (SWR) pipes in any length with rubber ring joints fixed to walls including clamps complete all as specified and directed. |
| 114 | S&F in repairs 75mm bore PVC (SWR) bends any radius complete all as specified and directed. |
| 115 | S&F in repairs 110mm bore PVC (SWR) bends any radius complete all as specified and directed. |
| 116 | S&F in repairs 20mm Dia Aluminium alloy anodised curtain rod decorative fancy type with brackets complete all as specified & directed. |
| 117 | S&F in repairs 140mm overall length of cover, floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring with lower portion fixed with hard rubber, fixed in floor complete all as specified and directed. |
| 118 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads Complete all as specified and directed. |
| 119 | S&F sheet glass ordinary quality & glazing with wooden bead/oil putty in Square n.exc 0.5 Sqm in each panel 3 mm thick complete all as per specified and directed. |
| 120 | S & F 3 mm thick Figured glass, pin headed type and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane complete as specified and directed. |
| 121 | S&F sheet glass ordinary quality & glazing with wooden bead/oil putty in Square n.exc 0.5 Sqm in each panel 5.5 mm thick complete all as per specified and directed. |
| 122 | S & F in repair Galvanized mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned stacks, or galvanized wire staples, complete all as specified and directed. |
| 123 | Excavating in post holes (or similar holes) in hard/dense soil each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified & directed. |
| 124 | M&L for plain cement concrete type D-2 1:4:8 (40mm graded aggregate) in foundations, filling and mass concrete complete all as specified & directed. |
| 125 | Dismantling chain link fencing wire mesh, any type & size complete all as specified & directed. |
| 126 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified & directed. |
| 127 | Supply only chain link MS galvanisd fencing, any size or type complete all as specified & directed. |
| 128 | M&L for TMT mild steel bars 10mm dia and over, cut to length, bent to shape required, as reinforcing bars in chain link fencing fixed complete all as specified & directed |
| 129 | S&F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified & directed. |
| 130 | S & F in 12mm thick toughned glass as in fixed glass, hinged doors, partitions, automatic doors, windows and similar work including cutting to shape, drilling holes, including single leg spider, ceiling/bottom to glass connector and pivots, glass to glass connector, stabilizer rod, floor clamp, plastic parts, wall to glass hinge, knob, roller, floorspring (With S.S. Cover), C Shape Square SS Handle - 450mm etc. all fittings for doors/partitions (including SS fittings) required to make functional all as specified and directed |
| 131 | M&L for complete removal of existing treatment , plastered or un-plastered surfaces of walls and applying two coats of plastic emulsion paint white or tinted over a coat of primer complete all as specified and directed. |
| 132 | S&F in repairs PVC Bath cabinet with mirror 18\\"x22\\"x4.25\\". Make: commander or equivalent complete all as specified and directed. |
| 133 | S&F in repairs for plate rack of stainless steel 1 mm thick for kitchen or labotary over all size 720 x 600 x 230 mm fixed with plugs and washers on wall complete all as specified and directed. |
| 134 | Repair/easing of doors/windows/ventilators of wooden/aluminium/steel, re-fixing or tightening of doors, windows, resecuring of door/window wire guage, (fixing only) builders hardwares, helical door spring including use of all types of nails, screws etc which are required to make good the work, complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysJul 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender