Tender For Repairs To Area Drainage, Ms Cattle Trap, Boundary Wall, Chain Link Fencing And Connected Works In Aor Of Age B/R-Iii Under Ge (South) Pune
Tender Value
39.99 Lakhs
Estimated cost
Bid Submission
21 Jul 2026
14 days left
EMD
79980
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pune → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs To Area Drainage, Ms Cattle Trap, Boundary Wall, Chain Link Fencing And Connected Works In Aor Of Age B/R-Iii Under Ge (South) Pune
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brickwork built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles all as specified and directed. |
| 2 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc1.5 m in depth and getting out soft/loose soil incl removing excavated material in soil exc. 1.50 km but n exc. 5 km and depositing where directed all as specified and directed. |
| 3 | M&L PCC (1:4:8) type D-2, 40mm graded coarse aggregrate as in foundations, filling in mass concrete etc. complete all as specified and directed |
| 4 | M&L for precast cement concrete block masonry exceeding 10cm in width with solid blocks of PCC (1:3:6) 20mm gde aggregate and setting in CM complete all as specified and as directed |
| 5 | Rendering 15 mm thick in cement mortar (1:6) on fair and even on faces of brick work or concrete surfaces complete all as specified and as directed by Engr-in-Charge. |
| 6 | M&L for rendering 15 mm thick in cement mortar (1:4) on fair and even on faces of brick work or concrete or stone wall surfaces with including taking down plaster, and including preparation of new plastered surfaces and applying two coats of cement base paint complete all as specified and as directed by Engr-in-Charge. |
| 7 | M&L for complete removal of existing treatment of old plastered surfaces and applying one coat of cement base paint on wall, cornices, chajjas all as specified and directed. |
| 8 | M & L for Preparation of old painted steel surfaces of any description exceeding 10 cm width or girth and applying one coat of synthic enamel paint complete all as specified and directed |
| 9 | Supply only integral water proofing compound all as specified and directed. |
| 10 | Demolition of cement Concrete (unreinforced) of any description and in any position not otherwise specifically provided for all as specified and directed. |
| 11 | M&L PCC (1:3:6) type C-1 using 20 mm stone graded aggregate as in coping, kerbs, bed blocks etc including weathering, slightly rounded or chamfered angles and throating, as directed complete all as specified and directed |
| 12 | M&L for PCC 1:3:6 type C-2, (using 40mm graded stone aggregate) of 75mm thick, laid in alternate bays as in plinth protection including finishing the surfaces even and smooth using extra cement. complete all as specified and directed |
| 13 | M&L Forming 12 mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘B’ of 75mm thick all as specified and directed. |
| 14 | M&L for PCC 1:2:4 type B-1, (using 20mm graded stone aggregate) as in surface channels and drains and benching of manholes incl all moulds and forms all as specified and directed. |
| 15 | M&L for Cement concrete type B-1,1:2:4 (20mm graded aggregate) in 100mm hardstanding & Spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green all as specified and directed. |
| 16 | Extra for forming fair finished drain or channels 30 cm inner girth in cement, concrete using extra cement including forms, moulds, mitred/stopped ends in manholes (inner girth only measured) complete all as specified and directed |
| 17 | Extra for forming fair finished drain or channels 55 cm inner girth in cement, concrete using extra cement including forms, moulds, mitred/stopped ends in manholes (inner girth only measured) complete all as specified and directed |
| 18 | M&L for precast factory made manhole cover with frame of medium duty, of size Square/rectangular/circular area of each cover exc. 0.35 Sqm and n.exc. 0.90 Sqm, 75mm thick with SFRC concreting including groove and hook arrangement for lifting and placing in position and sides covered by MS sheet with necessary collars all as specified and directed |
| 19 | M&L for providing precast RCC (1:2:4) type B1 using 20 mm graded stone aggregate for drain covers incl demolition of reinforced cement concrete of any description & in any position slab complete all as specified and directed |
| 20 | M&L for separating, scraping and cleaning of reinforcement all as specifed and directed. (Demolition of concrete measured separately) |
| 21 | M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed. |
| 22 | M&L for demoliton of stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar all as specified and directed. |
| 23 | M&L for dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedeed and pointed in any mortar all as specified and directed. |
| 24 | M&L for precast coloured, chequered cement concrete tiles, glossy finish of size 300 x 300mm x 25mm thick, conforming to IS-1237 (2006) set jointed and pointed in neat cement slurry in floor laid over and including 20mm thick screed bed in CM (1:6) complete all as specified and directed. |
| 25 | M & L for preparation of old painted surface and apply one coats of Floor paint/guard with ready mixed paint for use on floor complete all as specified & directed by Engineer-in-Charge. |
| 26 | S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall or laid in floors/in earth of 110 mm dia. incl dismantling of old pipe complete all as specified and directed |
| 27 | S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall or laid in floors of 150 mm dia. Including all fittings and dismantling of old pipe complete all as specified and directed |
| 28 | S&F PVC (SWR) bends plain 110 mm bore all as specified and directed. |
| 29 | Dismantling of wrought or MS work of any description etc as directed. |
| 30 | S&F mild steel framed work such as grills, grating, etc, with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders: framed balusters, wall ways, railings, frame work of water tanks and similar work confirming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 31 | M&LCast iron work grade FG 150, unmachined, in brackets, gully traps, gratings, railing, frames, manhole covers, fire and soot doors, dampers, stop valve boxes, gate stops, parts of ranges, balusters and similar articles complete all as specified and as directed. |
| 32 | Material and labour for preparation of new steel surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed |
| 33 | Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion in cement concrete and making good disturbed ground. complete all as specified and directed |
| 34 | Dismantling of fencing wiremesh, any type all as specified and directed. |
| 35 | Supply only chain link MS galvanised fencing any size or type as directed by Engr-in-charge |
| 36 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete. |
| 37 | Supply & Fixing MS work in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed. |
| 38 | M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade all as specified and as directed complete all as specified and directed . |
| 39 | Sand filling under floors or in foundations including watering and consolidation all as specified and directed. |
| 40 | Dismantling of plain or corrugated steel sheeting in roof covering complete all as specified and directed. |
| 41 | S & F roof sheeting pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick, 150GSM of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 42 | S&F for rolled mild steel conforming to grade E-250 (Fe-410W, quality A) as in post, main and cross beams, hip and jack rafters, purlins, where connected to common rafters and running rails and guides for sliding doors, fixed with angle clips or other connecting plates all as specified and directed. |
| 43 | Demolition of cement Concrete (unreinforced) of any description and in any position not otherwise specifically provided for all as specified and directed. |
| 44 | M&L PCC (1:3:6) type C-1 using 20 mm stone graded aggregate as in coping, kerbs, bed blocks etc including weathering, slightly rounded or chamfered angles and throating, as directed complete all as specified and directed |
| 45 | M&L for PCC 1:3:6 type C-2, (using 40mm graded stone aggregate) of 75mm thick, laid in alternate bays as in plinth protection including finishing the surfaces even and smooth using extra cement. complete all as specified and directed |
| 46 | M&L Forming 12 mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘B’ of 75mm thick all as specified and directed. |
| 47 | M&L for PCC 1:2:4 type B-1, (using 20mm graded stone aggregate) as in surface channels and drains and benching of manholes incl all moulds and forms all as specified and directed. |
| 48 | Extra for forming fair finished drain or channels 30 cm inner girth in cement, concrete using extra cement including forms, moulds, mitred/stopped ends in manholes (inner girth only measured) complete all as specified and directed |
| 49 | M&L in replacement of 2 nos SMPS of 200 watts(Make : Union), 01 nos of 32 Amp MCB (Make : Anchor) of pilon signage board, size 0.75X1.5m all as specified and directed. |
| 50 | M&L in replacement of 3 nos SMPS of 200 watts(Make : Union), 01 nos of 32 Amp MCB (Make : Anchor) of pilon signage board, size 0.75X1.5m all as specified and directed. |
| 51 | M&L in replacement of 5 nos SMPS of 200 watts(Make : Union), 01 nos of 32 Amp MCB (Make : Anchor) of Backlit signage board, size 2.5mX1.2m all as specified and directed. |
| 52 | M&L for replacement of of 2 nos SMPS of 200 watts(Make : Union), 01 nos of 32 Amp MCB (Make : Anchor) of 3D letter of 450mm height all as specified and directed. (Note : Letter to be fixed above the height of 4th floor) |
| 53 | M&L for replacement of 1 nos 60watt SMPS (Make : Union), 3 nos 6 watt SMD Module of LED Scoreboard of size 0.15X0.90m all as specified and directed. |
| 54 | M&L for 75mm core cutting in RCC slab/column/beam to make smooth surface for fixing of pipe all as specified and directed by Engineer-in-Charge. |
| 55 | M&L for replacement of 300mm height SS letter including fixing with wall all as specified and directed by Engr-in-Charge. |
| 56 | M&L for replacement of 200mm height SS letter including fixing with wall all as specified and directed by Engr-in-Charge. |
| 57 | M&L for replacement of 150mm height SS letter including fixing with wall all as specified and directed by Engr-in-Charge. |
| 58 | M&L for removal of Vinyl flooring in flooring incl supply and fixing of Vinyl flooring of 2.00 mm thick in OT of same description all as specified and directed. |
| 59 | M&L for carrying out infrared thermal scanning with the help of FLIR thermal imaging camera of B/E series on leakage affected areas for detecting water leakages and submitting the report along with recommendation for remedial solutions. The investigation should be conducted by inhouse team of reputed construction chemical manufacturer. |
| 60 | Cleaning the surface with wire brush, detecting sources of leakages and removing/taking down unsound treatment /surface and M&L for carrying out non-destructive waterproofing treatment to slab, floor and walls of bath, WC, WHB and floor traps (combined unit) by using construction chemical method as hydrophobic PU grouting, etc, with first course of injection MDI based PU foam and second course of injection PU plain all as per manufacturers instruction, etc, complete and as directed. The PU foam shall have 100% solids and solvent free, and shall expand 30-40 times its volume at liquid stage in presence of water, the PU plain injection shall have minimum 100 CPS viscosity and shore hardness minimum 50. Make: PIDILITE or equivalent make as approved by GE. |
| 61 | M&L for 3mm thick Aluminium Composite Panel (ACP) exterior grade (skin thickness 0.25mm) including aluminium anodised frame work of AA 300/5000 series with one core of material of virgin LDPE and coating of kynar 500 resin based PVDF coating (mettallic colour) with joint filling silicon weather proofing any colour incl taking down of existing sheet all as spd and as directed. |
| 62 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed. |
| 63 | M&L for preparation of new Surfaces of any description, over 10cm in width or girth in two coats of synthetic enamel paint not otherwise described on brick or concrete surface all as specified and directed. |
| 64 | M&L in replacement of pilon signage board of size 0.75X1.5m 3 nos SMPS of 200 watts(Make : Union), 01 nos of 32 Amp MCB (Make : Anchor) of all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysJul 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender