Tender For Repairs/Replacement Of All Sanitary Fitting, Plumbing Works And Water Proofing Including Misc Works At Zone-Iii And Zone -Iv Areas Under Age B/R-Ii Of Ge Nagrota.
Tender Value
30 Lakhs
Estimated cost
Bid Submission
22 Jul 2026
19 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jammu → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs/Replacement Of All Sanitary Fitting, Plumbing Works And Water Proofing Including Misc Works At Zone-Iii And Zone -Iv Areas Under Age B/R-Ii Of Ge Nagrota.
BOQ
| Sl. No. | Item Description |
| 1 | Taking up or down 15mm bore of steel tubing with connections for cleaning for refixing or removing to store/yard complete all as specified and directed. |
| 2 | S&F steel water tubing of nominal bore 15mm medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) complete all as specified and directed. |
| 3 | Fixing only water tubes of 15mm dia of any grade to walls and ceiling or laying in floor, complete all as specified and directed. |
| 4 | Taking up or down 20mm bore of steel tubing with connections for cleaning for refixing or removing to store/yard complete all as specified and directed. |
| 5 | S&F steel water tubing of nominal bore 20 mm, medium grade galvanised with all fittings including short lengths, laid in trenches complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) complete all as specified and directed. |
| 6 | Fixing only water tubes of 20mm dia of any grade to walls and ceiling or laying in floor, complete all as specified and directed. |
| 7 | Cuttings chases for concealed water tubing of concealed conduit (cutting n.exc 10 cms girth) and making good in CM ( 1:3) in brick walls complete all as specified and directed. |
| 8 | Disconnecting existing water tanks exc 250 but n.exc 500 Ltr capacity , setting aside (or lovering if required ) and cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes and reconnecting and re-fixing in position complete all as specified and directed. |
| 9 | Disconnecting existing water tanks exc 500 but n.exc 1000 Ltr capacity , setting aside (or lovering if required ) and cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes and reconnecting and re-fixing in position complete all as specified and directed. |
| 10 | Dismantling and removing to water storage tanks of capacity exceeding 250 ltrs but not exceeding 500 ltrs and removing to stores complete all as specified and directed. |
| 11 | Dismantling and removing to water storage tanks of capacity exceeding 500 ltrs but not exceeding 1000 ltrs and removing to stores complete all as specified and directed. |
| 12 | S&F in repair 500 ltrs capacity rotational moulded polythylene water storage tank trippled layer (Cylindrical vertical with closed top) hoisted including ball, brass valve 20mm high pressure with polythylene float and fly nuts screwed for iron pipes, all as specified in SSR Part I complete all as specified and directed. |
| 13 | S&F in repair 1000 ltrs capacity rotational moulded polythylene water storage tank trippled layer (Cylindrical vertical with closed top) hoisted including ball, brass valve 20mm high pressure with polythylene float and fly nuts screwed for iron pipes, all as specified in SSR Part I complete all as specified and directed. |
| 14 | S & F in repairs, 15 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed (Minimum weight 15mm-142gms) complete all as specified and directed. |
| 15 | Supply and fixing in repairs for 20 mm bore of Ball valve high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipe (weight not less then for 210 gms) complete all as specified and directed. |
| 16 | Supply and fixing in repairs for 25 mm bore of Ball valve high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipe (weight not less then for 455 gms) complete all as specified and directed. |
| 17 | Supply and fixing in repairs Gun-metal, globe or gate valves of 15mm bore with half turn lever arm /iron wheel head, screwed both ends for iron pipe complete all as specified and directed. |
| 18 | Supply and fixing in repairs Gun-metal, globe or gate valves of 20mm bore with half turn lever arm /iron wheel head, screwed both ends for iron pipe complete all as specified and directed. |
| 19 | Supply and fixing in repairs tank cover black/white (with arrangement for locking) of water storage tank of any capacity complete all as specified and directed. |
| 20 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for, complete all as specified and directed. |
| 21 | Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing coat, complete all as specified and directed. |
| 22 | M & L Cement concrete type B-0, 1:2:4 (12.5 mm graded crushed stone aggregate) 25mm thickness as in floor for laying tiles brushing with neat cement slurry @ 3.00 Kg/Sqm complete all as specified and directed. |
| 23 | M&L for Non-skid Coloured Designer Ceramic Tiles (Square/rectangular) area of each tile exceeding 0.06 sqm but n exc 0.11 sqm, 7-8mm thick in floors etc set & jointed in neat cement slurry & pointed in white or coloured cement to match including screed bedding layer of 15 mm thick in CM 1:6, complete all as specified and directed. |
| 24 | All as per ser item No. 23 above but on vertical surfaces such as dados, skirtings and risers to steps, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:3 on masonry/ concrete surfaces complete all as specified and directed. |
| 25 | M&L for Non-skid Coloured Designer Ceramic Tiles (Square/rectangular) area of each tile exceeding 0.11 sqm but nexc 0.18 sqm, 7-8mm thick in floors etc set & jointed in neat cement slurry & pointed in white or coloured cement to match including screed bedding layer of 15 mm thick in CM 1:6, complete all as specified and directed. |
| 26 | All as per ser item No. 25 above but on vertical surfaces such as dados, skirtings and risers to steps, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:3 on masonry/ concrete surfaces complete all as specified and directed. |
| 27 | M & L for Glazed coloured ceramic tiles in vertical surface 350x 250x7mm / 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10mm thk rendering in CM 1:3, complete all as specified and directed. |
| 28 | Demolition of stone slabs of any description or thickness in kitchen platform, floors,aprons laid, bedded,pointing in any mortar etc complete all as specified and directed. |
| 29 | M&L for green marble stone of 18mm to 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm screed bed in CM 1:4 complete all as specified and directed. |
| 30 | M&L for Granite slab 16 to 18mm thick as in pillars, window cill, cooking platform and the like in cement motar 1:4 including painting in white cment 1:2 using marble dust with a mixture of pigment to match the shade of granite including cutting polishing and moulding on edges complete all as specified and directed. |
| 31 | M&L for machine cut Kota stone slab flooring 18-20mm thick, laid over and incl 15mm thick cement screed /rendering in CM 1:6 ,laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl cutting, rubbing, gridding and polshing to achive mirror finish complete all as specified and directed. |
| 32 | M&L for machine cut Kota stone slab in riser of steps, skirting, dado and pillar, 15mm thick, mixed with pigment to match the shade of the slab incl 10mm thick cement screed /rendering in CM 1:4 incl cutting, rubbing, gridding and polshing to achive mirror finish complete all as specified and directed. |
| 33 | Demolition of brick work or stone masonry built in cement mortar including all quoines arches, pillar etc but excluding ashlar facing , dressed stone work and precast concrete articles complete all as specified and directed. |
| 34 | M&L for brick work with sub class B bricks straight or curved on plan exc 6m radius in CM 1:6 complete all as specified and directed. |
| 35 | All as per ser item no 34 above but except bricks |
| 36 | M&L for brick work with sub class B bricks straight or curved on plan to any radius in half brick thick built in CM 1:4, complete all as specified and directed. |
| 37 | Taking down cement plaster of any description on brick, concrete or stone walls or ceiling including racking out joints, hacking for key, scrubbing down with water etc and removal of rubbish off complete all as specified and directed. |
| 38 | M&L for rendering 10mm thick CM 1:6 on fair faces of brickwork or concrete surfaces finished even & smooth w/o using extra cement complete all as specified and directed. |
| 39 | M & L for rendering 15mm thick in two layer (10mm+5mm) in cement mortar 1:4 on fair faces of brick work / concrete surfaces finished even and smooth with out using extra cement with WPC complete all as specified and directed. Note:- (i) Water proofing compound on only top layer of plaster (i.e 5mm thick)(ii) Qty of WPC 200ml per cement bag as per manufacturer instructions (iii) WPC shall be measured and paid separately) |
| 40 | M&L for Rendering 5mm thick on fair faces of brick work or concrete surfaces in CM (1:3) in ceiling complete all as specified and directed. |
| 41 | Supply only Liquid water proofing compound complete all as specified and directed. |
| 42 | M & L for preparation of new plastered surface of wall and applying two coats of oil emulsion distemper over a coat of primer over a coat of 3mm thick wall care putty complete all as specified and directed. Note: (i) The painting is to be done using smart painting tools and technique as mentioned in Particular specification. Tenderer shall take this aspect in consideration before quoting his rates and no claim on account of misunderstanding or any thing else shall be admissible/acceptable at any later stage. |
| 43 | M&L for 2-3mm thick wall care putty on wall complete all as specified and directed. |
| 44 | M & L for Preparing New Surfaces of Walls and applying two coats of Cement base paint complete all as specified and directed.Note: (i) The painting is to be done using smart painting tools and technique as mentioned in Particular specification. Tenderer shall take this aspect in consideration before quoting his rates and no claim on account of misunderstanding or any thing else shall be admissible/acceptable at any later stage. |
| 45 | M&L for preparation of new plastered/unplastered surface and finishing walls with Acrylic Smooth exterior paint of required shade as approved by GE with two or more coats applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) on walls over 3mm thick plaster of paris putty including necessary scaffolding for max height of G+2 bldg with parapet, etc complete all as specified and directed.Note:- (a) Each stage i.e. preparation of surfaces, application of primer, application of first coat, application of second coat will be got passed from Engr-in -Charge.(b) The acrylic emulsion paint work shall be carried out by using smart painting tools and techniques as specified in Particular Specifications and Contractor will have to produce necessary documents for purchase of smart painting tools or rent receipt of these tools along with bill/RAR.The bidders are requested take this aspect in consideration before quoting their rate and no claim on account of misunderstanding or otherwise shall be admissible on this account. (c) The painting is to be done in one or more shades as approved by GE. |
| 46 | M & L for preparing new plastered surfaces of ceiling and applying two coats of oil emulsion distemper complete all as specified and directed. Note: (i) The painting is to be done using smart painting tools and technique as mentioned in Particular specification. Tenderer shall take this aspect in consideration before quoting his rates and no claim on account of misunderstanding or any thing else shall be admissible/acceptable at any later stage. |
| 47 | M & L for two coats of white wash on newly plaster surfaces of ceiling incl preparation of surface complete all as specified and directed. |
| 48 | Taking down shutters of any description n exc. 1.00 Sqm each, complete all as specified and directed. |
| 49 | Taking down shutters of any description exc. 1.00 Sqm and n exc. 2.00 Sqm each, complete all as specified and directed. |
| 50 | Taking down Chowkats or Frame (without taking off shutter from the frame) n exc. 1.50 Sqm, complete all as specified and directed. |
| 51 | Taking down Chowkats or Frame (without taking off shutter from the frame) exc. 1.50 Sqm but n exc 4.00 Sqm each, complete all as specified and directed. |
| 52 | M&L for PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed. |
| 53 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube complete all as specified and directed. |
| 54 | S&F Factory made Solid Panel PVC Door Shutter 30 mm thick consisting of frame made out of MS tubes for Top & bottom nails. MS framed shall be covered with neat moulded plain coloured PVC 'C' channel having PVC sheet ship if 20 mm width stuck inside with solvant cement for style and plain colour PVC shutters for top rail lock rail and bottom rail on edges side & gap insert for top rail bottom rail panelling of plain colour PVC sheet truck and nail with suitable PVC sheet bedding and jointed to shutter with solvent gear supply and fixing in the frame at site complete all as specified and directed. |
| 55 | S&F factory made mild steel ventilators box type with upper top hung shutters and bottom fixed type shutters including pintol hinges, steel peg stay and one shop coat of red oxide primer incl taking down old, complete all as specified and directed. Note :- (i) The ventilator shall be fabricated as per Drg No CEUZ/TD/1302/2009 Sheet 1/3 to 3/3.(ii) Glazing, wire gauge shall be measured and paid separately. |
| 56 | M&L for Factory made Steel Window 1.25mm thick box type (primer coated) ERW hollow P section of size 60mm x 25mm including grill using 10Sqmm bar double rebated both gauge and glass shutter comprised gauged glazed Skelton shutter of ERW section 50mm x 20mm and 1.0mm thick with two openable leafs having two Nos sash bar of T Section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T- Section of size 60mm x 25mm and 1.25mm thick including cutting holes and good dismantled portion in PCC (1:2:4) type B-1 four Nos for each window including following fittings welded to frame shutter complete all as specified and directed:- (a) Hold Fast, 150mm long of Flat Iron 12mm x 3mm made to shape 04 Nos per window .(b) Handle of Z-Section 20mm x 25mm, 100mm Long 01 No per Leaf . (c) MS Tower bolt 150mm long - 02No per leaf . (d) Z-section 20mm x 25mm, 100mm Long Stopper 1 No per Leaf .(e) Cleat 55mm Long of Hollow Square 15mmx20mmx63mm welded to Hinge 01 No per Leaf .(f) MS Pintal hinges of size 75mm x 12mm 02 Nos per Leaf including Stainless Steel Wire Cloth, 0.25mm to 0.36mm nominal dia of wire & average width of aperture 1.40mm to 02mm & fixed with aluminium wire staples and glass pane 3mm thick fixed with MS pin and oil putty including two coats of synthetic enamel paint complete and incl taking down old. |
| 57 | S&F Anodised aluminium Powder coated frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. |
| 58 | S&F powder coated aluminium window and ventilator shutters, sliding/openable/fixed (as per required at site) type without sash bar, alu section weighing 0.55 kg/m, including necessary locking arrangement, guide wheels, joining cleats, glazing clips rubber packing anodised aluminium snap beading screws etc complete all as specified and directed. |
| 59 | S&F aluminium power coated door shutters (sliding/openable/fixed (as per required at site) , aluminium section weighing 0.55 Kg/m including necesssary joining cleats, glazing clips, rubber neoprene packing handles 2 Nos in each door, pad lock, hinges, anodised aluminium snap beading screws etc complete all as specified and directed. |
| 60 | S&F for sheet glass plain/coloured 5.5 mm thick best quality and glazing with rubber packing, screws or glass putty in squares exc 0.5 Sqm each pane complete all as specified and directed. |
| 61 | Providing and fixing Aluminium Composite Panel (ACP) sheet of approved make and colour, 3–4 mm thick, fixed on aluminium door shutter/frame with aluminium sections, including necessary aluminium cleats, SS screws, rivets, sealant, beading, cutting, finishing complete all as specified and directed. |
| 62 | Hacking Out Old Broken Glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed. |
| 63 | M&L for Sheet Glass, 3.00mm thick glazing with Beads or Oil Putty, not exc. 0.5 Sqm in Each Pane, complete all as specified and directed. |
| 64 | All as per ser item no 63 above but Figured glass, pin head type in squares n exc 0.5 sqm each pane complete all as specified and directed. |
| 65 | Dismantling of boarding any description fixed in any position with nails complete all as specified and directed. |
| 66 | Providing and fixing cupboard shutters made of 19 mm thick block board, finished with 1.0 mm thick decorative laminate (sunmica) on outer face and 0.8 mm laminate on inner face, including 2 mm thick PVC edge banding / hardwood lipping on all exposed edges, complete with necessary hardware fittings such as stainless steel hinges, handles, magnetic catch / tower bolt, screws, etc., fixed in position, complete all as specified and directed. |
| 67 | Providing and fixing cupboard shutters/racks/partitions made of 12 mm thick block board, finished with 1.0 mm thick decorative laminate (sunmica) on outer face and 0.8 mm laminate on inner face, including 2 mm thick PVC edge banding / hardwood lipping on all exposed edges, complete with necessary hardware fittings such as stainless steel hinges, handles, magnetic catch / tower bolt, screws, etc., fixed in position, complete all as specified and directed. |
| 68 | Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 69 | S & F framed work such as grills, gratings etc with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters,walk ways, railings, framework of water tanks and similar works conforming to Fe-290 Gde E 165 complete all as specified and directed. |
| 70 | M&L for Preparation of new steel and iron surfaces of any description over 10 CM width or girth and applying two coats of synthetic enamel paint complete all as specified and directed. |
| 71 | S&F in repair stainless steel / powder coated Peg set of five of good quality complete all as specified and directed. |
| 72 | S&F 100mm long Butt Hinges extruded aluminium alloy with Galvanised mild steel hinge pin, anodised and fixed complete all as specified and directed. |
| 73 | S&F in repair 100mm long Butt Hinges Medium Weight, Cold Rolled Mild steel and fixed complete all as specified and directed. |
| 74 | S&F 100mm long Extruded aluminium alloy Handles, fabricated type, anodised complete all as specified and directed. |
| 75 | S&F in repair 150mm long Extruded aluminium alloy Handles, fabricated type, anodised complete all as specified and directed. |
| 76 | S&F for 125mm long anodised aluminium barrel tower bolt of extruded section complete all as specified and directed. |
| 77 | S&F in repair 125mm long anodised aluminium barrel tower bolt of extruded section complete all as specified and directed. |
| 78 | S&F in repairs 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 79 | S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed. |
| 80 | S&F for galvanised stainless steel wire cloth, 0.56 mm nominal dia wire and average width of aperture 1.18 mm and fixed with tinned tacks or stainless steel wire staple complete all as specified and directed. |
| 81 | S&F in repair galvanised stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or stainless steel wire staple complete all as specified and directed. |
| 82 | S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, complete all as specified and directed. |
| 83 | Taking down shutters of any description from the frames and refixing in the same opening after repair of door rescuring or easing & adjusting etc, area exc. 1.00 Sqm but n.exc 2.00 Sqm each complete all as specified and directed. |
| 84 | Repairs to Aluminium doors exc 1.50 Sqm but n exc 5.00 Sqm by necessary joining cleat, glazing clips, rubber neoprene packing handles 2 Nos in each doors, hinges anodised aluminium snap beading screw etc including chowkhat and refix in the same opening after complete repair except glass complete all as specified and directed. |
| 85 | S&F in repair, cast iron body Door Closer Hydralically regulated designation No 3 universal type, suitable for door shutter of 851 to 1000mm in width and of weight between 61 to 80kg and fixed complete all as specified and directed. |
| 86 | S&F in repair for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed. |
| 87 | Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards / slabs / blankets, any thickness, including cover fillets complete all as specified and directed. |
| 88 | S&F for Anodised aluminium snap grid frame work of size 605mm x 605mm for false ceiling, complete all as specified and directed. |
| 89 | M&L for 06 mm thick non asbestos fibre cement building boards (size 600X600mm) fixed or laid / inserted to timber / GI / Aluminium frames work with screws as in ceiling flat or sloping incl refixing in position of electric wiring, lights and fittings etc, complete if exists complete all as specified and directed. |
| 90 | Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets or Plain or corrugated steel sheeting,any gauge, thickness, in roof coverings in any position complete all as specified and directed. |
| 91 | S & F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as complete all as specified and directed. |
| 92 | S & F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridge, hips, valley gutter, drip and straight flashing fixed with self tapping complete all as specified and directed. |
| 93 | M&L and taking down of existing unserviceable roof treatment materials and PCC/CM/Brick tiles padding etc from top of roof upto slab (complete depth) carefully by cutting chiseling, cleaning the surface by scraping brooming brushing etc and removing the rubbish from site exc. 500m but n exc 5.00 Km (Outside of MoD land) and applying roof treatment with the following specifications complete all as specified and directed.:- (a) Rendering 10mm thick in CM 1:3 with water proofing compound on cleaned concrete surfaces of roof and finishing the surfaces fair and even including curing the plastered surfaces for 07 days by ponding of water over the roof (Levelling course). (Note : Water proofing compound shall be paid and measured separtely). (b) Applying evenly first coat cold bitumen primer confirming to IS-3384-1986 @ 0.40 Ltr per square metre on the cleaned plastered surfaces. (c) Applying evenly second coat of blown hot bitumen of grade 85/25 @ 1.20 kg per square metre (confirming to IS-702) on primed surfaces.(d) Applying third coat of APP modified membrane 3mm thick (minimum) and weight 3.60 Kg per square metre (reinforced) with polyster non woven fabric weighing not less than 150gms per square metre by torch application. The overlap shall not be less than 100mm on the transverse direction and 75mm on longitudinal direction respectively and sealing overlaps. |
| 94 | (e) Applying one coat of aluminium paint on top of APP membrane.Notes :- (i) Payment against this item shall not be allowed till completion of all the stages of work for any slab.(ii) The work shall be executed through authorised applicators as per manufacturer's instructions after obtaining written approval from the GE. |
| 95 | M&L for Removing old tarfelt or polythene film including taking down plaster of sunken floor , roughening and cleaning by brushing with wire brush to remove all dirt and apply a coat of cement slurry with 3.00 Kg of cement per sqm and Rendering 15mm thick in CM 1:3 using WPC finished rough (sunken floor/wall) and then applying two course treatment complete all as specified and directed as follow :-(i) Applying bitumen primer @ 0.40Kg/Sqm(ii) Laying APP (Atactic polypropylene) modified membrance 3mm thick and weighting not less than 3 Kg/Sqm with 100 GSM/Sqm non woven polyester mat as center core reinforcement, laid with 75 mm side over lap and 100mm end over lap. The membrane has to be laid with LPG torch and over lap sealed and finished neat. Notes :- (i) Payment against this item shall not be allowed till completion of all the stages of work for any slab.(ii) The work shall be executed through authorised applicators as per manufacturer's instructions after obtaining written approval from the GE. |
| 96 | M&L Providing, cement concrete Type B-0 (1:2:4) (12.5mm graded crushed stone aggregate) in roof kerbs or mud stops or as in padding, rounded or chamfered on edges complete all as specified and directed. |
| 97 | Supply and fixing in repairs Vitreous China Urinal, Half stall type, white with PTMT waste fitting, PVC waste pipe, brass CP urinal spreader including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws complete all as specified and directed. |
| 98 | S&F in repairs vitreous china wash down Water Closet white squatting pan Orissa pattern size 580x440mm with integral foot rest incl making necessary connections to soil pipes and flushing cistern complete all as specified and directed. |
| 99 | S/F in repair Vitreous china wash down water closet Pan (pedestal Pattern) white colour (excluding fixing bolt, flushing cistern and flush pipe) size 580 x 440mm with integral foot rest connecting flushing cistern and flush pipe complete all as specified and directed. |
| 100 | S&F in repairs One piece WC incl flushing cistern and soft closing seat cover and all connected items complete all as specified and directed. |
| 101 | Supply and fixing wall hung European Water Closet (EWC) of approved make and approved size, vitreous china of approved colour, complete with concealed cistern of dual flush capacity (3/6 litres), heavy duty wall mounting frame, soft close seat cover, flush plate, and all necessary fittings and fixtures including inlet/outlet connections, bolts, nuts, rubber gasket, and cutting/chasing in wall and making good the disturbed surfaces, complete all as specified and directed. |
| 102 | S&F in repair EWC seat cover for pedestal pan white / black closed pattern with flat bottom and cover and MS chromium plated aluminium hinge device, complete all as specified and directed. |
| 103 | S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed. |
| 104 | S&F in repair CP Seat jet with one meter PVC tube complete all as specified and directed. |
| 105 | S & F in repair chromium plated brass toilet paper holder (flap type) of approved make and design, complete with hinged cover (flap), concealed wall mounting arrangement, including necessary screws, rawl plugs, washers and fixing accessories, drilling holes in wall and making good the disturbed surfaces, complete all as specified and directed. |
| 106 | S&F in repair Vitreous china Wash Hand Basin size 550x400mm (flat back or angle back type) including 32mm dia brass chromium plated waste fitting a pair if cast iron bracket duly painted/erecting stand including cutting and pinning in ends making good disturbed surfaces in CM 1:3 including taking down unserviceable wash hand basin and connected items of any description, complete all as specified and directed. |
| 107 | Supply and fixing in repairs of vitreous china WHB white flat back size 550mmx400mm with pedestal on new brackets excluding taps waste china & plug including bracket etc complete all as specified and directed. |
| 108 | S & F in repairs,Wash basins, vitreous china white (Angle back type) of size 400x400 mm , excluding taps, waste chain and plug and porcelain stopper but including brackets and 32mm dia waste fittings brass chromium plated with long screwed shanks and fly nuts, 32mm x 600mm long PVC waste pipe complete flange end bedded in red lead cement and other end fixed as in repair complete all as specified and directed. |
| 109 | S & F in repairs, Wash basins, vitreous china white of counter top/ table top, excluding taps, waste chain and plug and porcelain stopper but including brackets and 32mm dia waste fittings brass chromium plated with long screwed shanks and fly nuts, 32mm x 600mm long PVC waste pipe complete flange end bedded in red lead cement and other end fixed as in repair complete all as specified and directed. |
| 110 | M&L for PVC Flushing Cistern 10 litre capacity low level valve less, symphonic action type white with inlet, ball valve, flaoat and handle including 32mm dia PVC Flush pipe a pair of cast iron brackets duly painted/erecting stand including cutting and pinning in ends, making good disturgbed surfaces in cement mortar 1:3 including taking down unserviceable flushing cistern complete all as specified and directed. |
| 111 | Supply and fixing in repairs internal fittings Kit complete for vitreous china flush cistern with twin flush complete all as specified and directed. |
| 112 | S&F flush pipe of polyethylene of low or high density or PVC, 32mm dia, for low level cistern complete all as specified and directed. |
| 113 | S&F in repair, Bib taps cast copper alloy 15mm bore, fancy type Chromium Plated , screwed down high pressure with crutch or butterfly handle, screwdd both ends for iron pipe or for unions, complete all as specified and directed. |
| 114 | S&F in repair bib taps 15mm bore long body, fancy type, cast copper alloy chromium plated with crutch or butterfly handle screwed down for iron pipe or for brass ferrule and fixed, complete all as specified and directed. |
| 115 | Supply and fixing in repairs 15 mm bib tap standard of PTMT any colour high pressure screwed for iron pipe & fixed minimum weight 90gm/each complete all as specified and directed. |
| 116 | M&L for Repairing of old chromium plated bib taps, pillar taps, wash hand basin mixture, stop cock, angle valve, concealed stop cock and similar items by changing its brass phases and making it functional complete all as specified and directed. |
| 117 | Supplying and fixing in repairs the internal spindle (face) of 15 mm diameter stop cock / bib tap / angle valve, including taking down the fitting, dismantling as required, replacement of worn-out spindle/face with new one of approved make, refixing, testing for smooth operation and leakage, and making good the disturbed portion complete all as specified and directed. |
| 118 | S&F Pillar cock 15mm bore fancy type chromium plated, screwed down high pressure with or without lettered HOT or COLD with long screwed and fly-nuts screwed for iron pipe or brass ferrule and fixed in repair complete all as specified and directed. |
| 119 | Supply and fixing in repair chromium plated brass swan neck pillar tap of approved make, 15 mm nominal bore, with elegant gooseneck spout, complete with operating lever/knob, aerator, and all necessary fittings including nuts, washers, PTFE tape, and connection to existing water supply line, cutting and making good the disturbed surfaces, complete all as specified and directed. |
| 120 | S&F in repair Brass chromium plated WHB center hole single lever mixer for mixing hot & cold Water screwed down for iron pipe 15mm bore complete all as specified and directed. |
| 121 | S&F in repair brass chromium plated wall mixer with spout (non - shower arrangement) complete for mixing hot & cold water screwed down for iron pipe 15mm bore, complete all as specified and directed. |
| 122 | S&F in repairs sink cock (wall mounted) with long swivel spout and wall flange, complete all as specified and directed. |
| 123 | S&F in repairs sink mixer (wall mounted) with 190 mm (7.5\\") long swivel spout connecting les and wall flanges, complete all as specified and directed. |
| 124 | S&F in repair angular Stop/Angle valve fancy type chromium plated,screwed down, high pressure with crutch or butterfly handle 15mm bore, complete all as specified and directed. |
| 125 | All as per ser item no 123 above but concealed type complete all as specified and directed. |
| 126 | S&F PVC waste pipe 32/40mm dia for WHB complete all as specified and directed. |
| 127 | S&F in repairs for Waste coupling of PTMT (half or full threaded) (Minimum weight 32mm-45gms/40mm-60 gms) complete all as specified and directed. |
| 128 | S&F in repair CP Grating doom 100mm dia complete all as specified and directed. |
| 129 | M&L for PVC Conncetions 15mm size with PTMT Nuts of length 450mm and fixed including taking down unserviceable PVC Connections, complete all as specified and directed. |
| 130 | S&F in repairs geyser connection pipe, 12mm dia, 450mm length (02 Piece set) complete all as specified and directed. |
| 131 | S&F in repair mirror cabinet with PVC body and openable shutter, shelves and size 350 mm x 450 mm complete all as specified and directed. |
| 132 | S&F in repair Looking mirror 600 x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 133 | S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with CP bracket guard and railing 60cm long complete all as specified and directed. |
| 134 | Supply and fixing corner glass shelf of approved make, made of 5–6 mm thick toughened glass with polished edges, complete with chromium plated brass/stainless steel brackets and concealed wall mounting arrangement, including necessary screws, rawl plugs and fixing accessories, drilling holes in wall and making good the disturbed surfaces, complete all as specified and directed. |
| 135 | S&F in repairs Brass chromium plated shower rose 125mm size with or without swivel joints, including fixing to steel pipe or union, complete all as specified and directed. |
| 136 | S&F in repair CP Soap Dish fixed in wall complete all as specified and directed. |
| 137 | S&F in repair CP Towel Rail 600mm long fancy type fixed with and including chromium plated brass screws and plastic cleats complete all as specified and directed. |
| 138 | Supply and fixing in repair chromium plated brass towel ring of approved make and design, complete with concealed wall mounting arrangement, including necessary screws, rawl plugs, washers, and fixing accessories, drilling holes in wall and making good the disturbed surfaces, complete all as specified and directed. |
| 139 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed. |
| 140 | Dismantling cast-iron/PVC pipes including fittings taking out of trenches or walls as required dia of pipe upto 110mm complete all as specified and directed. |
| 141 | S&F PVC (SWR) pipes, 110mm dia, single socketed, in any length with rubber ring joints, fixed to walls or laid in trenches or floors, complete all as specified and directed. |
| 142 | S&F PVC (SWR) pipes, 75mm dia, single socketed, in any length with rubber ring joints, fixed to walls or laid in trenches or floors, complete all as specified and directed. |
| 143 | S&F PVC (SWR) 75mm dia floor trap, plain with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed. |
| 144 | S&F PVC (SWR) gully trap 125/110mm setting and jointing with solvent cement as fixed in repairs complete all as specified and directed. |
| 145 | M&L for Rectification of water leakage from kitchen sink/wash basin area, including detection of source, dismantling and replacement of defective pipes, traps and fittings, jointing, testing, and making good the disturbed surfaces, complete all as specified and directed. |
| 146 | S&F PVC (SWR) bends 75mm bore complete all as specified and directed. |
| 147 | S&F PVC (SWR) bends 110mm bore complete all as specified and directed. |
| 148 | S&F PVC (SWR) 110mm bore branch piece, single (single Y) equal or unequal provided with access door complete all as specified and directed. |
| 149 | S&F PVC (SWR) 110mm bore branch piece, double (double Y) equal or unequal provided with access door complete all as specified and directed. |
| 150 | S&F PVC (SWR) 75mm bore Vent cowl complete all as specified and directed. |
| 151 | S&F in repair Stack clamps made out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 100mm bore, complete all as specified and directed. |
| 152 | S&F in repairs, for plate rack made of stainless steel 0.63 mm thick of size 600 X 750 mm fixed to wall with and incuding angle iron brackets of suitable size grouted in cement concrete, complete all as specified and directed. |
| 153 | S&F in repairs, sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysJul 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 24 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender