Tender For Online Complaint Management Work For Day To Day Repairs Under Mil Stn Dharamshala
Tender Value
Ref. Documents
Estimated cost
Bid Submission
21 Jul 2026
9 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kangra → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Online Complaint Management Work For Day To Day Repairs Under Mil Stn Dharamshala
BOQ
| Sl. No. | Item Description |
| 1 | S & F 15mm bore chromium plated brass bib taps with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 2 | S & F bib cock PTMT standard 15 mm dia of any colour high pressure screwed for iron pipe & fixed ( male or female as required) complete all as specified and directed. |
| 3 | S & F 15mm bore, Stop valves, cast copper alloy,screwed down,high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 4 | S & F 15mm bore fancy type chromium plated brass bib taps with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 5 | S & F 15mm bore fancy type chromium plated stop valve cast copper alloy, with long shank & cup (concealed type) with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete including necessary repair to existing tiles, cement plaste acomplete all as specified and directed. |
| 6 | S & F 15mm bore, gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 7 | S & F 20mm bore, gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 8 | S & F 15mm bore, brass CP central hole basin mixer for mixing hot & cold water screwed down for iron pipe complete all as specified and directed. |
| 9 | Dismantling / taking down 15 mm dia bib cock/ stop cock/angle cock of any pattern or of any type and re-fixing the same after minor repairs such as replacement of washers etc or re-fixing old serviceable bib cocks/ stop cocks any pattern complete all as specified and directed (any major parts such as jumpers brass/ spindles/ caps etc to be measured as supply only and paid for accordingly) |
| 10 | S&F CP brass hot & cold 15mm dia wall mixture for mixing hot & cold water with connecting legs & flengs in complete all as specified and directed. |
| 11 | S & F CP lege for wall mixture screwed to GI fitting complete all as specified and directed. |
| 12 | S & F CP extension nipple 25mm to 40mm long screwed to GI fitting complete all as specified and directed. |
| 13 | S & F brass spandle with washer complete sutable for wall mixture/WHP mixture complete all as specified and directed. |
| 14 | S & F brass leg for centre holl WHB mixture complete all as specified and directed. |
| 15 | S & F 15mm bore pillar taps, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed. |
| 16 | S & F brass chromium plated shower rose 125mm dia with swivel joints with and including suitable shower arm any size, complete all as specified and directed. |
| 17 | S&F in PVC waste pipe with socket suitable for connection to Waste fittings of 32/40mm dia, and of length minimum 75 cmcomplete all as specified and directed. |
| 18 | S & F in 32/40mm waste fittings, brass chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and flynuts, flange end bedded in red lead cement complete all as specified and directed. |
| 19 | S & F 100/75 mm waste fittings for stainless steel sink (sink coupling), brass chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and flynuts, flange end bedded in red lead cement complete all as specified and directed. |
| 20 | S & F PVC connection 15 mm size with brass nuts of length 600 mm of approved quality complete all as specified and directed. |
| 21 | S & F vitreous china wash basin with pedestal, white, flat back, size 550 x 400mm excluding taps, wastes but including bracketscomplete all as specified and directed. |
| 22 | S&F Vitreous china rimless one piece EWC with duroplast slim soft closed seat cover concealed P/S trap, snow white, pedestal pattern with integral vitreous china flushing cistern, size 670 x 355 x 755 mm with provision of plain cement concrete M-15, type B1 using 20mm garded crushed stone aggregate complete all as specified, incl making connections to trap and to flush pipe complete all as specified and directed. |
| 23 | Supply & fixing Vitreous Chinaware squatting pan, ‘Orrisa pattern’ size 580 mm x 440 mm, white, with Cast iron ‘P’ or ‘S’ trap, front or back inlet, integral footrest complete all as specified, excluding flushing cistern and flush pipe), etc and making good to floors in repair,complete all as specified and directed. |
| 24 | S &F Vitreous china wash down water closet pan (pedestal pattern), white and trap including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe etc seat and cover for pedestal pan , Health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 mtr long flexible tube and ABS wall hook including making connections and fixed in posisition complete all as specified and directed. |
| 25 | S & F in repair vitreous china wash basin, white, flat back, size 550 x 400mm excluding taps, wastes but including bracketscomplete all as specified and directed. |
| 26 | S & F sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x460mm bowl size 410mm x330mm x160mm complete all as specified and directed. |
| 27 | S & F in repairs 15mm bore, brass CP sink mixer for mixing hot & cold water screwed down for iron pipe complete all as specified and directed. |
| 28 | S & F in repairs Toilet paper holder recessed type stainless steel complete all as specified and directed. |
| 29 | S & F in repair PVC valveless, syphonic action type flushing cistern 10 ltr capacity, low level, with inlet ball valve, float and handle including brackets, PVC bend long type and connectin to flush pipe of any size and pattern complete all as specified and directed. |
| 30 | S&F vitreous china urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe. (Inclusive of fixing supply pipe to flushing cistern, trap and waste pipe) incl urinal spreader complete all as specified and directed. |
| 31 | Taking down GI pipe of 15mm bore etc. complete all as specified and directed. |
| 32 | S&F 15mm bore GI tubing medium grade galvanized with all fittings and fixed complete to walls and ceiling or laid in floor/wall complete all as specified and directed. |
| 33 | Refixing only old GI tubing 15 mm bore pipe and connections in new or old position as on walls ceiling floors etc complete all as specified and directed. |
| 34 | Taking down GI pipe of 20mm bore etc. complete all as specified and directed |
| 35 | S&F 20mm bore GI tubing medium grade galvanized with all fittings and fixed complete to walls and ceiling or laid in floor/wall complete all as specified and directed. |
| 36 | Refixing only old GI tubing 20 mm bore pipe and connections in new or old position as on walls ceiling floors etc complete all as specified and directed. |
| 37 | S & F in repairs plastic water closet seat cover, white/ivory colour, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 38 | S & F in repairs brass chromium plated tubular towel rail, 20mm dia, D type 60cm long between flanges complete all as specified and directed. |
| 39 | S&F Towel Ring fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90 gms) complete all as specified and directed. |
| 40 | S & F in repair ball brass valve high pressure with polythene float and flynut complete screwed for iron pipe 20mm bore complete all as specified and directed. |
| 41 | S & F in repair ball brass valve high pressure with polythene float and flynut complete screwed for iron pipe 15mm bore complete all as specified and directed. |
| 42 | S&F in repair PVC Knob/Handle (as per sample) for 10 ltr capacity PVC low level flushing cistern complete all as specified and directed. |
| 43 | S&F in repair PVC Syphon Kit (as per sample) for 10 ltr capacity PVC low level flushing cistern complete all as specified and directed. |
| 44 | S & F in repairs brass chromium plated bottle traps for wash basins with inlet and out let screwed for pipe or connections including necessary packing, union and cap complete all as specified and directed. |
| 45 | S&F in repair complete Veta washer set (as per sample) for 10 ltr capacity PVC low level flushing cistern complete all as specified and directed. |
| 46 | S&F in repair covers for PVC overhead water tanks of any capacity (as per sample) complete all as specified and directed. |
| 47 | S&F in repairs rotational moulded polyethylene water storage tanks (cylindrical vertical top) hoisted and fixed in position 500 litre capacity including dismantling & remove old tank from site complete all as specified and directed. |
| 48 | S&F in repairs tank nipple complete all as specified and directed. |
| 49 | S&F in repair Rotational moulded polyethlene water storage tanks (cylindrical vergical with closed top) hoisted and fixed in position all as specified in SSR Part I,capacity of water tank 1000 Ltr including dismantling & remove old tank from site complete all as specified and directed. |
| 50 | S&F Ball brass valves 20mm , high pressure, with polyethene float & fly-nut complete, screwed for iron pipe or brass ferrule & fixed complete all as specified and directed. |
| 51 | S&F Glass/PTMT shelf with CP railing fancy type complete all as specified and directed. |
| 52 | S&F Glass/PTMT corner shelf with CP railing fancy type complete all as specified and directed. |
| 53 | S&F (600mm x 450mm) bevelled edge mirror of selected quality glass mounted on 6mm thick AC building board or commercial plywood with aluminium frame 15 x 15 and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 54 | S & F in repairs soap dish stainless steel , complete all as specified and directed. |
| 55 | S & F in repairs CP grating (with or without waste hole), 125 mm size, fixed on floor/nahani traps etc complete all as specified and directed. |
| 56 | S&F in repair 75mm bore PVC (SWR) floor trap with grating incl jointing to waste pipe with cement concrete 1:2:4 complete all as specified and directed. |
| 57 | S&F stainless steel plate racks of size 900mmx600mmx250mm having thickness of SS strip 1mm, fixed on wall etc complete all as specified and directed. |
| 58 | S&F health faucet APS body mild steel chromium body plated suitable for 15mm dia pipe with 1.25 mtr flexible tube and ABS wall hook including makimng connections and fixed in position. complete all as specified and directed. |
| 59 | S & F in repairs 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls,floor complete all as specified and directed. |
| 60 | S & F in repairs 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls,floor complete all as specified and directed. |
| 61 | S & F 110 mm bore, PVC (SWR) bends fixed to PVC pipes, complete all as specified and directed. |
| 62 | S & F 75 mm bore, PVC (SWR) bends fixed to PVC pipes, complete all as specified and directed. |
| 63 | S & F 110 mm bore, PVC (SWR) junction T equal or unequal fixed to PVC pipes, complete all as specified and directed. |
| 64 | S & F 75 mm bore, PVC (SWR) junction T equal or unequal fixed to PVC pipes, complete all as specified and directed. |
| 65 | M&L for 20mm diaStainless Steel curtain rod with brackets and knobs at both ends as per site requirement including taking down old existing conduit pipes with accessories complete all as specified and directed. |
| 66 | S&F stainless steel brackets for depray rod 20mm dia as per sample kept in GE Office complete as specified and directed. |
| 67 | S&F stainless steel side knobs for depray rod 20mm dia as per sample kept in GE Office complete as specified and directed. |
| 68 | S&F in repairs Mild steel galvanised wire cloth 0.56mm nominal dia of wire and 1.18 mm average width of aperture fixed with tinned tacks or galvanised wire staple, complete all as specified and directed. |
| 69 | S & F in repairs mild steel Butt Hinges, 100 mm size, medium weight, cold rolled fixed with screws/welding to wooded/steel frames or chowkats, complete all as specified and directed. |
| 70 | M&L welding in repairs with thickness of metal not exceeding 6mm and not exceeding 2.5 cm in length etc complete all as specified and directed. |
| 71 | M&L in repairs 2nd HW plain fillets, square, rectangular or triangular in section, wrought, secured with nails/brads or secured with screws, cross sectional area exc 6 sqcm and n. exc 13 sqcm, complete all as specified and directed. |
| 72 | S&F for MS sliding door bolt 250 mm long stove enamelled black with bright bolt etc.complete all as specified and directed. |
| 73 | S & F in repairs 200 mm aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed. |
| 74 | Supply and fixing in repair 125 mm long aluminium handles, fabricated type, anodised and fixed complete all as specified and directed. |
| 75 | S&F in repairs MS 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 76 | S & F Aluminium body Door closer hydraulically regulated, designation No. 2 universal type, suitable for door shutter of wt. between 36 to 60 Kg complete all as specified and directed. |
| 77 | S & F in repairs floor door stopper 140mm size of aluminium alloy body and tounge, anodised, with hard drawn steel spring complete all as specified and directed. |
| 78 | S & F MS 2 Levers Mortice Lock vertical type size 100mm complete all as specified and directed. |
| 79 | S & F Rubber Door Cill in Panelled/Glazed And Skeleton Shutters fixed with Nails or Wooden screws complete all as specified and directed. |
| 80 | S & F Ball Catches with 8mm dia steel ball and brass body and striking plate incl letting in and fixed complete all as specified and directed. |
| 81 | S & F hasp & staple 100mm size, safety type, Aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed. |
| 82 | Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/springs clips complete all as specified and directed. |
| 83 | S & F 3.0mm thick sheet glass ordinary quality and glazing with oil putty in squares n. exc 0.50 Sqm in each pane complete all as specified and directed. |
| 84 | S & F 3.0mm thick figured glass, pin head type and glazing with oil putty in squares n. exc 0.50 Sqm in each pane complete all as specified and directed. |
| 85 | Taking down shutters of any description exceeding 1.00 sqm but not exceeding 2.00 sqm each and refixing in the same opening including easing and adjusting including renewal of unserviceable screws etc. complete all as specified and directed. |
| 86 | M&L for 18/19mm thick Particle board medium density, flat pressed, single layer or three layer type with BWR type adhesive fixed with screws to timber frame work as cup board shutter complete all as specified and directed. |
| 87 | S&F in repairs ( to be fixed with screws & welding as required) continuous (piano) hinges, mild steel, bright finish or electrogalvanised, width of flap (when open) 30mm complete all as specified and directed. |
| 88 | Taking down chowkhats or frames with shutters (wihtout taking off shutters from the frame) exc. 1.5 but not exc. 4 Sqm each and removing from site, complete all as specified and directed. |
| 89 | Taking down chowkhats or frames with shutters (wihtout taking off shutters from the frame) not exc. 1.5 Sqm each and removing from site, complete all as specified and directed. |
| 90 | Taking down shutters exc. 1.0 Sqm but not exc. 2.0 Sqm each and removing from site, complete all as specified and directed. |
| 91 | Taking down shutter of any description n.exc 1 Sqm each complete all as specified and directed. |
| 92 | S&F for pressed steel frames of size 105 X 60 mm for doors with one or more rebates including necessary fixing lugs hinges, locks strike plate etc and making good the wall with plaster in CM 1:6 complete all as specified and directed. |
| 93 | S& F Pressed steel frames of size 125 X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, and making good the wall with plaster in CM 1:6 complete all as specified and directed. |
| 94 | M&L for M-15 nominal mix concrete type C0 (1:3:6) using 12.5mm graded aggregate as in steel door frames complete all as specified and directed. |
| 95 | Supply and fixing steel windows with side hung shutters inclduing projecting type hinges with steel handle and steel peg stay complete with glazings bards devetailed or welded complete all as specified and directed. |
| 96 | Supply and fixing steel ventilators with centre hung shutter including two pairs of brass cup pivoted catch spring and pulley wheel complete all as specified and directed. |
| 97 | M&L for 2nd class hardwood plain solid, straight , chokhats & frames, wrought framed rebated on the solid, rounded or chamfered , put togther with glue pinned to joints, supplied and fixed complete all as specified and directed. |
| 98 | Factory made 2nd class hard wood plain framed, panelled 35mm thick shutters (two panels) with lock rail and panels of 9mm BWP commercial plywood or 12mm veneered particle with commercial face veneers on both sides. The size of rail and and style as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated, complete all as specified and directed. |
| 99 | S&F 35mm thick IInd class hardwood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed. |
| 100 | S & F of 25mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. divided into squares, with out sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc. and size of the members of shutter is as specified in clause No. 8.24 (a) of MES schedule 2009, part – I (Specifications) complete all as specified and directed. |
| 101 | S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed. |
| 102 | Preparation of new untreated Steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 103 | M&L for two coat of synthetic enamel paint over a coat of pink primer on new or previously untreated wooden based or wood Surfaces of any description, not otherwise descri-bed, over 10cm width or girth complete all as specified and directed. |
| 104 | Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete as shown on page No 176 to 183 of MES SSR 2020 Part-II compete all as specified and directed. (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life) |
| 105 | Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails.M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and Plain colour PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site, as per specification compete all as specified and directed. |
| 106 | Aluminium, anodised, barrel tower bolts of extruded section and fixed with 150mm long bolt, complete all as specified and directed. |
| 107 | Butt hinges, medium weight, cold rolled, mild steel 100mm long, complete all as specified and directed. |
| 108 | Anodized aluminium alloy handles, fabricated type, anodised of sized 150mm, complete all as specified and directed. |
| 109 | 300mm long anodised aluminium alloy sliding door bolt, bolt type, stove enamelled black, with bright bolt not less 16mm dia, with and including a minimum of 6 bolts and nuts, 4 on bolt plate and 2 on stapple plate, 300mm long, complete all as specified and directed. |
| 110 | Demolition of cement concrete in ground floors and paving, not exceeding 15cm thickness (below or above ground level), un-reinforced, complete all as specified and directed. |
| 111 | M & L PCC 1:3:6 type C2 (40mm graded ) as in plinth protection 75mm thick. |
| 112 | PCC M-15, nominal mix, type B-1, using 20mm graded mechanically crushed stone aggregate as in floors, 25mm thick, finished even and rough to receive floor finishes,complete all as specified and directed. |
| 113 | M&L for (non skid), preminium class I grade, coloured ceramic tiles, 7 to 8mm thick (square/rectangular) area of each tile ex. 0.06 Sqm but not exc. 0.11 Sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick screed bedding layer in cement mortar 1:6 complete all as specified and directed. |
| 114 | M&L for light shade virified ceramic tile, 7 to 8mm thick (square/rectangular) area of each tile not exc. 0.36 Sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick screed bedding layer in cement mortar 1:6 complete all as specified and directed. |
| 115 | M&L for light shade virified ceramic tile, 7 to 8mm thick (square/rectangular) area of each tile not exc. 0.36 Sqm,vertical surfaces such as skirtings/dado etc., set and jointed in neat cement slurry and pointed with white or coloured cement, laid over and including 10mm thick bedding layer in cement mortar 1:4 on surfaces of walls complete all as specified and directed. |
| 116 | Taking down cement plaster/terrazo dado/wall tiling and skirting. etc on brick or stone walls etc including racking out joints hacking for key and scrubbing down with water etc, complete all as specified and directed. |
| 117 | M&L for glazed ceramic coloured tiles, premium class I grade, of size 300mm x 450mm x 7mm thick as in vertical surfaces such as skirting/dado etc., set and jointed in neat cement slurry and pointed with white or coloured cement, laid over and including 10mm thick bedding layer in cement mortar 1:4 on surfaces of walls complete all as specified and directed. |
| 118 | Dismantling of wall & ceiling boarding (fibre, pulp, insulation etc., or insulation board/slab/blankets, any thickness, with nails, including cover fillets and removing from site complete all as specified and directed. |
| 119 | M&L solid PVC wall lining consisting of 5mm thick plain / hollow colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing, complete all as specified and directed. |
| 120 | 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification, complete all as specified and directed. |
| 121 | S&F false ceiling with fibre cement designer tile ivory painted (high pressure steam cured) of 4mm thickness (as per IS:14862) of size 595 x 595 mm and any one of the design (oceanic, lake & hill, cascade or electra) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120gms , both side inclusive ) consisting of main T runner with suitably spaced joints to get required length and 15x32 mm made of 0.30mm sheet and crosss T at 600mm c/c to form a grid including required cutting/making opening for services like diffusers, grills, light fittings, fixures, smoke detectors etc. Main T runners to be suspended from ceiling using GI soffit cleats fixed to existing rafter, purlin etc with galvanised butterfly level clips, spaced at 1200mm c/c along main T, bottom exposed width of 15mm of all T-sections shall be centra black pre-painted with polyester paint, and having a load bearing capacity of 12kg/sqm and refixed all existing electric wiring and fixture all complete at all heights as per direction of GE. |
| 122 | M&L 2nd class hardwood plain fillets sectional area exc. 3 Sqcm and n.exc. 6 Sqcm, square, rectangular or triangular in section, clean sawn, secured with nails of brads,complete all as specified and directed. |
| 123 | Material and labour for 4mm thick non asbestos fibre cement decorative type building boards fixed to timber frame/GI/aluminium frame work fixed with nails as in ceiling flat or sloping, complete all as specified and directed. |
| 124 | Demolition of stones or brick masonry built in cement mortar including all quoins, arches etc. but excluding ashlar facing, dressed stone work etc. complete all as specified and directed. |
| 125 | M & L brick work with subclass 'B'bricks,straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed. |
| 126 | M&L for stone walling of random rubble with best quality locally available harder stone such as granite, trap or basalt brought upto courses well bonded bedded, solidly hearted and built in cement mortar 1:6, complete all as specified & directed. |
| 127 | All as per Srl item No. 126 above but except stone. |
| 128 | Dismantling of corrugated or plain steel sheeting of any gauge thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 129 | Supply & fixing galvanized corrugated mild steel sheeting 0.50mm thick with two corrugations side lap fixed with L-type or J type hooks and washers, in roof, walls etc. with grade of zinc coating 275 gm complete all as specified and directed. |
| 130 | Supply & fixing galvanized plain mild steel sheeting 0.50mm thick as in ridges, hips, valley gutters, drip and straight flashings with grade of zinc coating 275 gm complete all as specified and directed. |
| 131 | Pre pantined galvalume aluminum zinc coating GI based corrugated steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws complete all as specified and directed. |
| 132 | Pre pantined galvalume aluminum zinc coating GI based plain steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screwscomplete all as specified and directed. |
| 133 | Mild steel work as in wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc., flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting etc., and similar work comforming to Fe-290 Gde E-165, complete all as specified and directed. |
| 134 | Dismantling of framed work timber scantlings 40 Sqcm and over in section, in any position,complete all as specified and directed. |
| 135 | Material and labour for 2nd class hard wood as in scantling, framed work as in ceiling, clean swan timber and fixed in any position complete all as specified and directed. |
| 136 | M&L granite (of any type) 16 to 18mm thick (table rubbed and polished) as in cooking platforms, in steps jambs, window cills, door cills and like in cement mortar (1:4) in pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified and directed. |
| 137 | M & L Rounding to edges of stone slabs one edge, such as in steps,cooking platform, and other similar situations complete all as specified and directed. |
| 138 | S&F anodised aluminium door shutters aluminium section weighting 0.55 Kg/m indluding necessary joining cleats, glazing clips, rubber packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc. complete all as specified and directed. |
| 139 | S&F three track aluminum anodised sliding window with three sliding shutter , the size of outer frame three track 100 x 37x 1.50mm ( using two track for glazed window shutter and one track for wire gauged ) , the section shutter size 37x 18x 1.2mm)and glazing with 5 mm thick Transparency glass of poly carbone including all-around suitable rubber gasket and stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.4mm and fixed on aluminum flat and inserted in the frame of shutter with tracking arrangement each sliding window shall be provided with one number handle including locking arrangement & 2 numbers’s sliding rollers of nylon with including all necessary fittings complete all as specified and directed. |
| 140 | S&F Aluminium deco grill of 5 to 6mm dia size of mesh not exe 7.5cm in either direction including Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainlesssteel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixingapproved anodised aluminium standard section around the opening, all complete as per requirement and direction of GE. |
| 141 | M&L for cleaning of water service tank (inside area only) of any description, including scraping, scrubbing (without damaging tank surface) deposits / scales, algae formations, silt /sticky matters adhering tank surface and washing inner tank surface with approved grade of chemicals complete, of capacity exc 250 liters n.exc 500 liters complete all as specified as directed. |
| 142 | M&L for cleaning of water service tank (inside area only) of any description, including scraping, scrubbing (without damaging tank surface) deposits / scales, algae formations, silt /sticky matters adhering tank surface and washing inner tank surface with approved grade of chemicals complete, of capacity exc 500 liters n.exc 1000 liters complete all as specified as directed. |
| 143 | Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed. |
| 144 | Taking down cement or cement lime plaster, any descriptionon on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed. |
| 145 | Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:6 and finishing the surface even and smooth without using extra cement complete all as specified and directed. |
| 146 | Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 and finishing the surface even and smooth without using extra cement mixed with WPC (WPC shall be measured and paid seperately) complete all as specified and directed by Engineer in charge. |
| 147 | Rendering 10mm thick cement plaster on faces of brick work or concrete surfaces in cement mortar (1:3) as in ceiling finished even and fair without using extra cement complete all as specified and directed. |
| 148 | M&L for rendering or plastering work 15 mm thick in CM 1:3 in fascia/edges/ceiling of Chajjas and roof projections etc, including taking out peeled off plaster / concrete and making the line in true shape and finishing the surface without using extra cement,complete all as specified and directed. |
| 149 | M&L for preparation of newly plastered surface of walls and applying two coats of cement base paint over primer complete all as specified and directed. |
| 150 | M&L for preparation of newly plastered surface of walls and applying two coats of oil bound distemper over primer complete all as specified and directed. |
| 151 | Three coats of white wash on new finished surface of ceiling including preparation of surfaces complete all as specified and directed. |
| 152 | M&L for preparing surfaces of wall and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new/old surfaces with wall care putty complete all as specified and directed. |
| 153 | M&L for preparing plastered or unplastered surfaces of ceiling and applying one coat of white wash on ceiling complete all as specified and directed. |
| 154 | M & L for 2 mm thick wall care putty on wall complete all as specified and directed. |
| 155 | Preparation of old painted wooden surfaces of any description and otherwise described over 10 CM width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 156 | Preparation of new/old untreated Roof Steel Sheet surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 157 | Checking of joinery (wooden/steel) iron/aluminium mongery, pelmet box, door springs etc requiring carpentry work and carrying out minor repairs such as tightening of screws/nails, minor adjustment of joinery, door / windows by means of planer/chisling etc, false ceiling reapir by wire, curtain rod fixed with screw, including petty repairs material like screws/nails, plug etc. to make it functional, complete all as specified and directed. Note : 1. Any items required to be replaced shall be paid under respective items and in that case this items shall not be measured and paid. 2. The rates included for One Carpenter (Skilled person & One Helper (Semi skilled person). The contractor or his authorised rep shall collect the complaint of all carpenter work from complaint cell /Engr-in-charge daily and all complaint will be rectified by the contractor with in same day than the returned the complaint slip after completion of complaint and get recipt from concered JE/Enge-in-charge .If he fails to complete the work with in same day then recovery will be made @150.00 per complaint per day . |
| 158 | Minor repairs and attending to water leakage from Bib taps, flushing cisterns, wash hand basins GI pipe line and other sanitary fittings/fixtures and any obstruction to water supply, requiring plumber work such as replacement of washers, GI nipple GI socket, any other GI fitting check nuts, tightening of fittings of flushing cistern etc including petty materials like washers of all sizes, thread(shoot), M-seal, screws, nails to make water supply/ plumbing lines functional and leak proof and minor repairs of PCC floor, Plaster, Brick/Stone Work complete all as specified and as directed by Engr-in-Charge. Note : 1. The rates included for One Plumber, One Mason (Skilled person) & Two Helper (Semi skilled person) for attending the daily complaints Necessary recovery should be done in case of complaints should not done in same day @ Rs 150 per complaint & as directed by Eng -in-charge. 2. Any item required to be replaced shall be paid under respective item and in that case this items shall not be measured and paid. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysJul 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender