Tender For Repair/Maint To Joinery, Wall Panelling, Wall & Floor Tiles And Plumbing Works And Repair To Road, And Road Side Furniture Of Technical And Residential Area Of Itm Mussoorie Under Ge (I) R&D Dehradun
Tender Value
18.98 Lakhs
Estimated cost
Bid Submission
20 Jul 2026
11 days left
EMD
38000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dehradun → Uttarakhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Maint To Joinery, Wall Panelling, Wall & Floor Tiles And Plumbing Works And Repair To Road, And Road Side Furniture Of Technical And Residential Area Of Itm Mussoorie Under Ge (I) R&D Dehradun
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkhats of frames n.exc 1.50 sqm with shutters (without taking off shutters from the frames) and making good disturbed portion complete all as specified & directed. |
| 2 | Description all as per Srl Item No. 1.00 here-in-before, but exceeding 1.5 Sqm and n.exc 4 Sqm (without taking off shutters from the frames) and making good disturbed portion complete all as specified & directed. |
| 3 | Taking down shutters of any description area not exc 1.00 Sqm each complete all as specified & directed. |
| 4 | Taking down shutters of any description area exc 1.00 sqm and not exc 2.00 Sqm each complete all as specified & directed. |
| 5 | Taking down cement plaster of any description on brick or concrete surfaces etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified & directed. |
| 6 | M&L for brick work with sub class ‘B’ old size bricks straight or curved on plan exc. 6 metre mean radius built in cement mortar (1:6) including demolition of old u/s brickwork built in cement mortar complete all as specified & directed. |
| 7 | M&L for Rendering 15mm thick cement plaster in cement mortar (1:4) on brick or concrete surfaces of wall finished even and smooth without using extra cement complete all as specified & directed. |
| 8 | Preparation of new plastered/unplastered surfaces on walls and applying two coats of oil bound distemper over a coat of chalk whiting complete all as specified & directed. |
| 9 | M&L for Welding in repairs of old/broken steel windows/door shutter exc 2.50 cm but n. Exc. 5.00 cm in length and thickness of metal exc 6mm but n.exc 9mm complete all as specified & directed. |
| 10 | S&F 2nd class hard wood 35mm thick glazed and skeleton shutters for doors, open rebated and prepared to receive glass or gauge etc (without sash bars) edges of framing plain chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (b); supplied and fitted to chowkats complete all as specified and directed. |
| 11 | S&F 2nd class hard wood 35mm thick, plain framed, panelled door shutters (two panels) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS-1003 (Part-I) kiln seasoned and chemically pressure treated, fitted to chowkats all as specified & directed. |
| 12 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 13 | Description all as per Srl Item No. 12.00 here-in-before, but of Frame size 65x125 mm complete all as specified & directed. |
| 14 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 15 | S&F Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 16 | S&F 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels commercial type on both sides, faces with lipping/frame to match complete all as specified and directed. |
| 17 | Decorative laminate 0.90mm type-1 of surface finish, colour and pattern (glossy/mate/glitz) as approved by Engr-in-Charge, fixed with approved adhesive as per manufacturer's instructions complete all as specified & directed. |
| 18 | S&F Factory made solid PVC door frame of size 50mm x 47mm made out of 5 mm wood grain printed PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with printed sheet reinforced with MS square tube manufactured as per SSR Part-I specifications and drawings. |
| 19 | S&F factory made soild PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails MS frame shall be covered with heat moulded wood grain printed PVC sheet used instead of Plain colour PVC sheet & 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (900) used instead of exposed portion of PVC sheet beading. PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. |
| 20 | S&F Butt hinges, heavy weight, cold rolled, stainless steel length of hinges 125mm etc complete all as specified & directed. |
| 21 | S&F Butt hinges, heavy weight, cold rolled, stainless steel length of hinges 100mm etc complete all as specified & directed. |
| 22 | S&F 300mm Stainless steel sliding door bolts, plate type, stove enamelled SS, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed. |
| 23 | S&F 300mm Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and directed. |
| 24 | S&F 150mm Stainless steel pressed handles, oval type, stove enamelled black complete all as specified and directed. |
| 25 | S&F 150mm extruded brass handles, fabricated type polished cast type, complete all as specified and directed. |
| 26 | S&F 150mm stainless steel barrel tower bolts, stove enamelled ss, with bright bolt and fixed complete all as specified and directed. |
| 27 | S&F 150mm Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and directed. |
| 28 | S&F heavy duty SS magnetic door stopper, floor/wall mounted type, manufactured from SS-304 grade stainless steel, with strong magnetic holding arrangement, concealed fixing arrangement, including screws, fasteners and fixing accessories complete all as specified and directed by Engineer-in-Charge. |
| 29 | S&F factory manufactured pressed steel door (Tata Pravesh or equivalent) of approved design and make, single or double leaf, overall thickness not less than 45 mm, comprising pre-painted galvanised steel sheets on both faces with PUF/honeycomb core insulation, factory pressed and bonded complete with MS stiffeners, reinforcement for locking arrangement, galvanised steel door frame fabricated from minimum 1.20 mm thick sheet with holdfasts/anchors, door shutters made from minimum 0.60 mm thick galvanised steel sheets, necessary beading, sealing arrangements and all standard fittings & fixtures such as SS butt hinges, mortice/cylindrical lock, handles, tower bolts, rubber gasket, door stopper, door closer, peephole etc, including fixing in position by grouting/fastening, cutting, chasing, embedding holdfasts, making good disturbed masonry/concrete/plaster surfaces and factory applied primer/powder coated finish of approved shade, complete in all respects as directed by Engineer-in-Charge |
| 30 | M&L for Cleaning and removing all scale and dirt, etc. from tanks and form mouths of circulating pipes, etc., capacity of tank exc 250 & n exc 500 litres including writing date of cleaning on the tank with suitable synthetic enamel paint etc complete all as specified and directed. |
| 31 | M&L for Cleaning and removing all scale and dirt, etc. from tanks and form mouths of circulating pipes, etc., capacity of tank exc 500 & n exc 1000 litres including writing date of cleaning on the tank with suitable synthetic enamel paint etc complete all as specified and directed. |
| 32 | Dismantling structural steel work including doors, gates,grills but excluding framed truss etc complete all as specified & directed. |
| 33 | Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified & directed. |
| 34 | S&F in repairs Butt hinges, heavy weight, cold rolled, Stainless steel length of hinges 100 mm etc acomplete all as specified & directed. |
| 35 | S&F in repairs Butt hinges, heavy weight, cold rolled, Stainless steel length of hinges 125 mm etc complete all as specified & directed. |
| 36 | S&F in repairs door stopper aluminium anodized white dale 40mmx40mm and 2mm thick dia 150mm having rubber bash 25mm dia long (high) at end the sheet/fixed to door shutter with steel cadmium places screw all as specified etc complete all as specified & directed. |
| 37 | S&F in repairs 150mm stainless steel barrel tower bolts, stove enamelled ss, with bright bolt and fixed complete all as specified and directed. |
| 38 | S&F in repairs heavy weight, cold rolled, Stainless steel, sliding door bolt 150mm long complete all as specified & directed. |
| 39 | S&F in repairs Stainless steel pressed handles,oval ype, polished bright of size 150 mm complete all as specified & directed. |
| 40 | S&F in repairs Stainless steel 300mm, ordinary rat tail rod pattern springs, including roller and roller plate complete, fixed in repairs complete all as specified & directed. |
| 41 | Hacking out old broken glass (anythickness, size, quality or description)from wooden frames or stone, concrete or brick surrounds, glazed with puttyor fixed with beads complete all as specified & directed. |
| 42 | Description all as per Srl Item No. 41.00 here-in-before, but from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified & directed. |
| 43 | M&L 3mm thick sheet glass, ordinary type and glazing with oil putty or fixed with bead/glazing pins in squares size exc 0.5 sqm in each pane including hacking out old broken glass (any thickness, size quality or description) complete all as specified & directed. |
| 44 | S&F in repairs galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm fixed with tinned tacks, or galvanized wire staples complete all as specified & directed. |
| 45 | S&F in repairs door closer cast iron body hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified & directed. |
| 46 | S&F Anodised aluminium frame for doors,windows and ventilator with one or more rebates including joining cleat for fixing etc complete all as specified & directed. |
| 47 | S&F anodised aluminium door shutters, aluminium section weighing 1.10kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc complete all as specified & directed. |
| 48 | Taking down aluminium shutter n. exe 2 sqm each and refixing in same opening after tightening and adjusting including replacing of accessories as required complete all as specified and as directed. Note: Replaced of any item shall be paid and measured seperately as supply and fix. |
| 49 | Taking down aluminium shutter exe 2 sqm each and refixing in same opening after tightening and adjusting including replacing of accessories as required complete all as specified and as directed. Note: Replaced of any item shall be paid and measured seperately as supply and fix. |
| 50 | M&l for 4.8mm thick sheet glass, ground or obscured or frosted/ tinted and glazing with oil putty or fixed with bead/glazing pins in squares of exe 0.5 sqm in each pane complete all as specified & directed. |
| 51 | S&F pivot suitable for aluminium shutter including necessary fixing arrangments complete all as specified and as directed. |
| 52 | S&F rubber neoprene packing complete all as specified and as directed. |
| 53 | S&F anodised aluminium snap on beading/tapper clip for fixing the glass or particle board complete all as specified and as directed. |
| 54 | S&F in repair brass 4-levers Mortice lock, verticle type, size 100mm for aluminium door complete all as specified and as directed. |
| 55 | Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs,weather boardings, plywood including cover fillets etc complete all as specified & directed. |
| 56 | S&F Insulated PVC/WPC Designer Wall Panelling comprising PVC/WPC laminated panels 8–10 mm thick, fire-retardant, ISI marked, having density not less than 1.4 gm/cm³, in approved shade, colour, design and pattern with glossy/matte finish, fixed in interlocked arrangement using tongue-and-groove / click-lock joint system to ensure proper alignment and seamless finish, fixed to GI/MS framework/battens consisting of vertical and horizontal members of approved make and size, securely fixed to wall surface with screws, rawl plugs, dash fasteners, nuts, bolts and necessary accessories complete.Note:The work shall include providing and fixing all corner profiles, edge trims, junction strips, grooves, beads and end caps wherever required, making necessary cut-outs/openings for electrical switches, sockets, conduits, AC pipes, service openings and other fixtures, with all joints truly aligned, edges neatly finished, surface properly cleaned and completed in all respects, complete all as specified and directed by Engr-in-Charge. |
| 57 | Preparation of new or previously untreated surfaces of Steel surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified & directed. |
| 58 | Preparation of new wooden surfaces of any description not otherwise described, over 10 cm width or girth and providing two coat of synthetic enamel paint over one coat of pink primer complete all as specified & directed. |
| 59 | Supply and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension (extruded section profile) 48x40 mm (tolerance ± 1 mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 Nos. stainless steel hinges fixed to the frame complete all as specified by the manufacturer complete all as specified and directed. |
| 60 | Supply and fixing factory made uPVC white colour Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.10 sqm) comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality complete all as specified and directed by Engineer-in-Charge. (Glass shall be paid separately) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. (Make: Finesta or equivalent) |
| 61 | S&F 5.5mm thick frosted, on one side Sheet glass, ordinary quality and glazing with oil putty / EPDM gasket in square exc 0.5 sq. m in each pane complete all as specified & directed. |
| 62 | Supply and fixing 5.5mm frosted/acid-etched glass strip of approved size and thickness with DRDO logo sandblasted/laser engraved at top portion, including edge finishing, necessary beading (wooden/aluminium/uPVC as applicable), rubber packing, screws, sealant, and fixing in panels/partitions/doors complete, all as specified and as directed. |
| 63 | S&F in repair 18 to 20 mm thick solid PVC Board for cupboard/cabinet shutters with one side 1 mm thick printed PVC sheet other side plain PVC sheet of approved pattern as per specification and drawing and incl necessary beading in matching colour, magnetic ball catcher, 1 brass 2 lever lock of 50 mm complete all as specified and directed. |
| 64 | S&F in repairs 75 mm, Extruded brass handles, fabricated type polishedbrass, for cupboard fixed with nut, screw and washer of mild steel, bright finised complete all as specified and directed. |
| 65 | S&F in repairs for ball catcher for cupboard/cabinet etc complete all as specified and directed. |
| 66 | S&F in repairs 50mm dia cupboard / cabinet knobs of MS fixed with nuts,screwsand washers complete all as specified & directed. |
| 67 | Providing and fixing stainless steel wall mounted kitchen utensil rack of size 39\\" × 36\\" (approx), manufactured from stainless steel tubular frame and shelves, having multi-tier arrangement for keeping utensils and kitchen items, including side railing, plate holding arrangement, hanging hooks and perforated/drain tray as required, complete with all necessary brackets, screws, fasteners and fittings for proper fixing to wall, finished smooth and polished, complete all as specified and directed. |
| 68 | M&L Plain cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate as in foundation filling & Mass concrete , sub base including Demolition of plain cement concrete (Un reinforced)of any description in any position and removal of demolished materials to a distance exceeding 500 M but not exceeding 1000m complete all as specified and directed. |
| 69 | M&L providing 100mm thick PCC (cement concrete) 1:2:4 etc type B-2 (using 40 mm graded stone aggregate) pavement/ramp/floor finsihed even an smooth without using extra cement including Demolition of plain cement concrete (Un reinforced) of any description in any position and removal of demolished materials to a distance exceeding 500 M but not exceeding 1000m complete all as specified and directed. |
| 70 | M&L for repairs to damaged/spalled portions of existing cement concrete road by cutting/removing loose and deteriorated concrete to required depth, preparing edges properly, cleaning the surface thoroughly with wire brushing and air/water jet, applying approved polymer modified bonding coat (Sika Latex Power / Nitobond / Dr. Fixit Pidicrete URP or equivalent approved), and making good with polymer modified cementitious repair mortar/micro concrete of approved make in average thickness of 50 mm, finished to line, level, camber and slope matching existing road surface including curing complete, removal of debris and disposal outside Defence land complete all as specified and directed by Engineer-in-Charge. |
| 71 | S&F in repairs cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions complete all as specified and directed by Engineer-in-Charge. |
| 72 | S&F in repairs metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed. |
| 73 | S&F in repair road safety polycarbonate convex mirror of 80 cm dia mounted on mild steel pipe with anti theft steel nets including necessary excavation and embedding in PCC 1:2:4 type B1 of required size as per manufacturer instructions complete all as specified and directed. Please Enable Macros to View BoQ information |
| 74 | S&F in repair road safety polycarbonate convex mirror of 80 cm dia mounted on mild steel pipe with anti theft steel nets including necessary excavation and embedding in PCC 1:2:4 type B1 of required size as per manufacturer instructions complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysJul 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender