Tender For Periodical Services To Compound Wall, Reataing Wall, Steel Surface Painting And Certain Misc B/R Works At Technical And Residential Area Of Itm Mussoorie Under Ge (I) R&D Dehradun
Tender Value
30 Lakhs
Estimated cost
Bid Submission
27 Jul 2026
4 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dehradun → Uttarakhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Periodical Services To Compound Wall, Reataing Wall, Steel Surface Painting And Certain Misc B/R Works At Technical And Residential Area Of Itm Mussoorie Under Ge (I) R&D Dehradun
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 20-Jul-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 27-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | M&L for complete removal of existing treatment form wall to make the surface free from dust, loose paint and loose plaster by scrapping manually / mechanically and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm on wall surfaces complete all as specified and directed. |
| 2 | M&L for preparing of old painted steel surfaces over 10cm width or girth and making good with & including by necessary red lead putty and make the surface smooth by rubbing with sand papers etc and applying one coat of synthetic enamel paint on old prepared surfaces of steel complete all as specified and directed. |
| 3 | Demolition of stone/brick masonry built in cement mortar incl quoins, arches, etc but exceeding ashlar facing dressed stone Work etc complete all as specified and directed. |
| 4 | M&L for Brick work with sub class 'B' bricks, straight or curved on plan exc 6m mean radius in cement mortar 1:6, complete all as specified and directed. |
| 5 | M&L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete including demolition of Brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles etcall as specified and as directed. |
| 6 | Description all as per item Srl No. 5.00 here in before but except stone complete all as specifeid and directed. |
| 7 | Hammer dressing with a maximum depression from a straight edge held against the surface not exceeding 40mm dressing lime stone complete as specified and directed. |
| 8 | M&L for raised pointing to Random Rubble or Polygonal rubble brought upto course masonary in CM 1:4 complete as specified and directed. |
| 9 | M&L for Rendering 15mm thick in CM (1:4) on fair faces of brick masonry/ concrete surface on wall and finishing the surfaces even and smooth without using extra cement, complete all as specified and directed. |
| 10 | M&L for preparation of newly plastered surface on walls applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm on wall surfaces complete all as specified and directed. |
| 11 | M&L for preparing old floor tile surfaces by thoroughly cleaning, removing dirt, grease, loose particles and other foreign matter, and applying one coat of protective acrylic exterior floor paint of approved make and shade (Asian Apex Floor Guard, Indigo Floor Paint, or equivalent as specified in the List of Makes of CA), complete all as specified and as directed by the Engineer-in-Charge. |
| 12 | Preparing existing surface top by wire brushing and cleaning the dust and forign materail etc complete and applying a coat of hot blown bitumen 85/25 grade @ 1.20kg/Sqm over a coat of bitumen primer @ 0.40 ltrs/Sqm and there after laying of a layer of APP based polymeric membrane (five layered with centre core as 100 microns high molecular high density polyethylene film) weighing 3kg/Sqm and will be laid as per MES SSR Pt-I para 11.43.2.2 with minium side lap 75 mm and end Lap of 150 mm bonded with hot blown bitumen 85/25 gde penetration @ 1.20 kg/sqm and blinded with fine sand in dry condition (pleable free) @ 0.50 kg/sqm dusted over the bitumen coat complete all as specified and directed. |
| 13 | Demolition of cement concrete (unreinforced) of anay description as in ground floors and pavings not exceeding 15cm thickness (above or below ground floors) complete all as specified and directed. |
| 14 | M&L for 100mm thick cement concrete type C-2, 1:3:6 (using 40mm graded crushed stone aggregate) as in sub floor complete all as specified and directed. |
| 15 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra send complete all as specified and directed. |
| 16 | Dismanting wrought iron or mild steel work of any description as in angle /grill etc complete all as specified and directed. |
| 17 | S&F framed work such as grills, gratings, etc.. With ends of bars shouldered and riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work con-forming to Fe. 290. Gde-E-165. Note (ii) :- Work will be carried out upto 6 story in necessary scafolding and safety measures and labour insurance etc complete all as specified and directed. |
| 18 | Preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 19 | M&L Providing PCC 1:2:4 Type B-1 using 20 mm graded stone aggregate in coping and benching of Brick wall, drain etc including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 20, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 27, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 4 daysJul 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysJul 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender