Defence Statutory Bodies & Commissions/Committees Closing in 4 days TDR #56240797

Tender For Repair Painting Of Steel Furniture (Almirah Locker Steel Tables And Chairs) Including Replacement Of Plywood Top To Charpoy Gi Pipe At Af Stn Carnicobar. 8824/E8 2Nd Call

Issued by Statutory Bodies & Commissions/Committees · Nicobars, Andaman And Nicobar Islands
Tender Value
24 Lakhs
Estimated cost
Bid Submission
14 Jul 2026
4 days left
EMD
48000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Nicobars → Andaman And Nicobar Islands
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Repair Painting Of Steel Furniture (Almirah Locker Steel Tables And Chairs) Including Replacement Of Plywood Top To Charpoy Gi Pipe At Af Stn Carnicobar. 8824/E8 2Nd Call

BOQ

Name of Work:- REPAIR PAINTING OF STEEL FURNITURE (ALMIRAH LOCKER STEEL TABLES AND CHAIRS) INCLUDING REPLACEMENT OF PLYWOOD TOP TO CHARPOY GI PIPE AT AF STN CARNICOBAR. 8824/E8 2nd CALL
Sl. No. Item Description
1M & L for dismantling GI charpoy and carrying out repairs like threading at ends of existing pipe, removing broken unserviceable legs, long rails, short rails, elbows and check nuts welding joints wherever necessary and threading at both ends, fixing new elbows and check nuts, reassembling the GI charpoy complete all as shown on drawing and as directed.(Drawing Ref FD-220/ 77) Note: Long rails, Short rails, Stiffener, elbow and check nuts required to be replaced will be measured and paid separately as supply only. However, the fixing charge including welding shall be deemed to include in the rate quoted for this item.
2Supply only GI 32mm dia 3Way elbow for GI pipe Charpoy all as shown on drawing and directed.
3Supply only GI check nut for GI pipe charpoy all as shown on drawing and directed.
4Supply only 30 mm x 4mm MS flat iron stiffener duly drilled for fixing of ply top to be welded to long rail at both sides of GI Charpoy all as shown on drawing and as directed.
5Supply only 32 mm dia GI Pipe medium grade duly threaded at both ends for long rail of GI Charpoy all as shown on drawing and as directed.
6Supply only 32 mm dia GI Pipe medium grade duly threaded at both ends for short rail of GI Charpoy all as shown on drawing and as directed.
7M & L for removing the existing unserviceable or worn out plywood top of Charpoy GI/Charpoy OR Steel and S & F new 12mm thick Ply wood top, commercial BWR Grade, type BB, ISI Marked with nut & bolts to stiffeners and rails of charpoy all as shown on drawing and directed.
8M & L for removing existing unserviceable table top and supply and fix new top with 18mm thick pre-laminated particle board exterior grade-I, with 4mm thick teak wood beading all-round duly polished on all sides all as shown on drawing and as directed for the following:-.Table Office / Officer Steel(Drawing Ref FD- 84/ 1003)
9All as per item No 8.00 above but Table office clerk steel(Drawing Ref FD-84(M)/ 1004)
10All as per item No 8.00 above but Table 900 x 900x 760 mm steel(Drawing Ref FD- 1007)
11All as per item No 8.00 above but Teapoy Verandah (White top)(Drawing Ref FD-225)
12M & L for removing the existing unserviceable locking device from Almirah large/medium/locker steel and S & F new locking device with duplicate keys of approved make all as specified and as directed. Make Sheel/Navtal(Drawing Ref FD-67M/1031/243/1032/ 257)
13M & L for removing the unserviceable damaged legs of steel Almirah large/medium /locker steel and providing new legs made out of 18 gauge mild steel sheet into required shape including necessary welding and painting with two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer by spraying machine to match with existing all as shown on drawing and as directed.(Drawing Ref FD-67M/1031/243/1032/ 257)
14M & L for removing of old unserviceable/broken Hasp & Staple of locker steel bed side and S & F new 75mm aluminium anodized Hasp & Staple, fixed with 10mm dia MS rivets complete all as shown on drawing and as directed.(Drawing Ref FD- 257)
15M & L for removing of old unserviceable/ broken handle from Almirah large/ medium /locker steel bed side and S & F new mild steel handle complete all as shown on drawing and as directed.(Drawing Ref FD-67M/1031/243/1032/ 257)
16M & L for removing of old unserviceable cleats from Almirah large/medium steel and supply and weld new cleats made out of 14 gauge mild steel sheet of 25 x 35 mm including applying two coats of synthetic enamel paint light grey/olive green over one coat of red oxide zinc chrome primer including preparation to match with existing all as specified and directed.(Drawing Ref FD-67M/1031/243/1032/ 257)
17Removing U/S seat and back of chair CBA steel and replacing of new seat and back of chair CBA steel as per Drg Chair CBA steel with arms complete all as specified.(Drawing Ref FD-75(M))
18Removing U/S seat and back of chair CBA steel and replacing of new seat and back of chair CBA steel as per Drg Chair CBA steel with out arms complete all as specified.(Drawing Ref FD-75(M))
19M & L for replacement of old unserviceable castor wheel from chair revolving/executive/computer with new castor wheel including welding, greasing and adjusting complete all as specified and as directed.
20M & L for removing worn out broken cane and re-canning with new plastic cane of 0.4 mm thick plastic cane for chair verandah clean of surface all as specified and directed.(Drawing Ref FD-256)
21M & L for carrying out repairs by removing dents and bends, welding wherever necessary including preparing surface by scraping down old painted steel surfaces and filling with putty to obtain even surface and applying one coat of synthetic enamel paint light grey/olive green colour complete by using machine spraying all as specified and as directed for the following: -Almirah large steel with shelves(Drawing Ref FD-67M/ 351/ 1031)
22All as per item No 21.00 above but but Book Shelf Open Large Steel Size 6'x6\\"h x 36\\" w x 12\\" depth
23All as per item No 21.00 above but Chair tubular steel with arms(Drawing Ref FD-75(M))
24All as per item No 21.00 above but Chair tubular steel without arms(Drawing Ref FD-75(M))
25All as per item No 21.00 above but Form without back(Drawing Ref FD-9(M))
26All as per item No 21.00 above but Form with back(Drawing Ref FD-78M/ FD-335)
27All as per item No 21.00 but Locker bed side steel
28All as per item No 21.00 but Rack steel adjustable 6 tier(Drawing Ref FD-1038/ 345)
29All as per item No 21.00 but Rack side steel 3 tier(Drawing Ref FD-321/ 1023)
30All as per item No 21.00 but Stool steel 305 x 305 x 760mm (FD-81M)
31All as per item No 21.00 above but Table 900 x 900 x 760 mm(Drawing Ref FD-1009)
32All as per item No 21.00 above but Table 900 x 600 x 760 mm with drawer(Drawing Ref FD-1008)
33All as per item No 21.00 above but Table 900 x 600 x 760 mm without drawer(Drawing Ref FD-1007)
34All as per item No 21.00 above but Table 900 x 600 x 760 mm without drawer Table Office Clk Steel 1220x710x760mm (Drawing Ref FD-84M)
35All as per item No 21.00 above but Almirah large steel 1/2 H x 1/2 S(Drawing Ref FD-1033)
36All as per item No 21.00 above but Almirah Map steel (Drawing Ref FD-243)
37All as per item No 21.00 above but Almirah small steel 1/2 H x 1/2 S(Drawing Ref FD-1034)
38All as per item No 21.00 above but Bed Steel Iron Hospital
39All as per item No 21.00 above but but Rack side with Tray (Drawing Ref FD-97M)
40Schedule of Credit (Minus) Rs.29795.00 NOTE: Bidder shall insert credit amount of Rs.29795.00 as rate in Green field under Col-13. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 56240797
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 24 Lakhs
LAST DATE 14-07-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Repair Painting Of Steel Furniture (Almirah Locker Steel Tables And Chairs) Including Replacement Of Plywood Top To Charpoy Gi Pipe At Af Stn Carnicobar. 8824/E8 2Nd Call
Basic Detail
Tender No 8824/E8
Bidding Type Tender
Location
City Nicobars
State Andaman And Nicobar Islands
Key Dates
Publish Date 30 Jun 2026
Submission Date 14 Jul 2026
Open Date 21 Jul 2026
Finance
Tender Value 24 Lakhs
Tender Fee 500
EMD 48000
Exemption Available
Document List
0ab4c290-7774-4b0e-9607-f7956b1fb405.html
8824Tender2ndcall.pdf
BOQ_868378.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Jun 30, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Jul 14, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 4 days
Jul 21, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 11 days

Tender Documents

Download All (ZIP) ↓
html

0ab4c290-7774-4b0e-9607-f7956b1fb405.html

pdf

8824Tender2ndcall.pdf

xls

BOQ_868378.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders