Tender For Special Repair Of Bldgs No P-954, Chinar Auditorium At Bb Cantt, Srinagar In The Aor Of Age B/R-I Under Ge 864 Ews
Tender Value
1.45 Crore
Estimated cost
Bid Submission
28 Jul 2026
19 days left
EMD
2.20 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
srinagar → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair Of Bldgs No P-954, Chinar Auditorium At Bb Cantt, Srinagar In The Aor Of Age B/R-I Under Ge 864 Ews
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specifed and directed. |
| 2 | M&L for 25 mm thick cement concrete 1:2:4, type B1 (using 20 mm graded stone aggregate), as in sub base of floor complete all as specified and directed. |
| 3 | M&L for Non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar 1:6 for laying floor finishes complete all as specified and directed. |
| 4 | M&L for non skid/mat finish ceramic tiles/Mat finish tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white cement to match over and including 15mm thick screed bed in cement mortar 1:6 for laying floor finishes complete all as specified and directed. |
| 5 | M&L for non skid ceramic tiles/Mat finish tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm on vertical surfaces as in skirting set and jointed in neat cement slurry and pointed in white cement to match over and including 10mm thick cement plaster in cement mortar 1:4 to receive vertical tiles complete all as specified and directed. |
| 6 | M&L for glazed ceramic coloured tiles in vertical surface 450x300x7mm thick including 10mm thick cement plaster in cement mortar 1:4 set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed. |
| 7 | Demolition of stone slabs and tiles of any description or thickness in floors aprons etc laid bedded and pointed in any mortar, complete all as specified and directed. |
| 8 | M&L machine cut Kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab over 15mm thick screed bed of cement mortar 1:6 including rubbing and polishing complete all as specified and directed. |
| 9 | M&L machine cut Kota stone slab 20-25mm thick in riser of steps ,skirting, dado and pillar laid over cement screed and cement slurry including 10mm thick cement plaster 1:3 CM to receive Kota stone and jointed rubbing and polishing complete all as specified and directed. |
| 10 | M&L for granite (of any type) work table rubbed and polished 18-20 mm thick machine cut,in steps, jams,pillars,window cills,cooking platforms and like laid and bedded over 15 mm thick cement mortar in cement mortar 1:6 including pointing in white cement 1:2 using marble dust with admixture of pigment to macth with shade of granite, complete all as specified and directed. |
| 11 | Rounding the edge of stone slabs one edge such as in steps, cooking platforms, and the other simmilar situation, complete all as specified and directed. |
| 12 | Demolition of brick or stone boulder masnory, built in cement mortar including all quoins, arches, pillars, etc., but excluding ashlar facing, dressed stonework and percast concrete articles complete all as specified and directed. |
| 13 | M&L for brick work with subclass B bricks, staright or curved on plan exc 6.00 mtr mean redius, biult in 1:6 cement mortar complete all as specified and directed. |
| 14 | M&L for brick work with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in 1:4 cement mortar complete all as specified and directed. |
| 15 | M&L taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 16 | Refixing of 15mm bore old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.)+B32 complete all as specified and directed. |
| 17 | M&L for 15 mm dia tubes medium grade galvanised with all fitting and fixed to walls and ceilings or laid in floors complete all as specified. |
| 18 | Taking up or down 20 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 19 | Refixing of 20mm bore old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.complete all as specified and directed. |
| 20 | M&L for 20 mm dia tubes, medium grade, galvanised with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed by Engineer-in-charge. |
| 21 | M&L for lagging upto 20mm pipes used in internal water supply or plumbing all round with, 25 mm thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144 Kg/cum conforming to IS 9842 complete all as specified and directed by Engineer-in-charge. |
| 22 | Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth in brick wall complete all as specified. |
| 23 | S&F for rotational moulded polyethylene water storage tanks 500 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position including dismantling old unserviceable tank complete all as specified and directed. |
| 24 | S&F for rotational moulded polyethylene water storage tanks triple layer 1000 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position including dismantling old unserviceable tank complete all as specified and directed. |
| 25 | S&F in repairs gun metal gate valves 20mm dia with iron wheel head screwed both ends for iron pipe complete all as specified and directed. |
| 26 | S&F in repairs ball valves 20mm high pressure of PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe and fixed complete all as specified and directed. |
| 27 | S&F in repairs 100 mm bore Traps 'P' or 'S' complete all as specified and directed. |
| 28 | S&F in repair vitreous china squatting pan, 'Orissa' pattern, size 580 x 440 mm white, with integral foot rests complete including provision of lime concrete bedding complete all as specified and directed. |
| 29 | S&F in repairs vitreous chinaware wash down water closet pan padestal pattern One Piece floor mounted EWC with UF Soft close slim seat cover, hinges, fixing accessories of seat of size 380x655x765mm, P trap 180mm & cistern with fittings complete all as specified & directed.Make: Jaquar Cat No: LYS-WHT-38751P180UFSM, Cistern : 38751P250UFSM or equivalent |
| 30 | S&F in repair 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed. |
| 31 | S&F in repairs PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed. |
| 32 | S&F in repairs Vitreous China wash basin, white , flat back,size 550x400mm fixed on existing brackets or stands incl 32mm PVC waste coupling, waste pipe, complete all as specified and directed. |
| 33 | S&F in repair vitreous china oval bowl shape counter wash basin (white) of size 560mmx400mmx205mm fixed on and including cast iron cantilever bracket, 32mm dia brass waste coupling and 32 mm dia PVC waste pipe fitting etc. complete all as specified and directed. Make : Cera/Hindware/Parryware/Jaquar or equivalent etc all as specified as directed. |
| 34 | S&F in repair Vitreous China urinal with intergated EFS, of size 360x330x740mm full stall type, white complete including providing and fixing all metalic components of the urinal are stainless, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in sealent; fixing flush pipe, grating and Union for discharge pipe complete all as specified and directed.Make: CERA Cat part No S4010101 or equivalent of approved makes |
| 35 | S&F in repair 15 mm bore stop valve/angle valve chromium plated with long shank and cup (concealed type) ,cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union complete all as specified and directed. |
| 36 | S &F in repairs 15mm dia bib taps fancy type, long body, Chromium plated, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 37 | S&F in repair 15mm dia pillar taps swan neck type cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and flu-nuts screwed for iron pipe complete all as specified and directed. |
| 38 | S&F in repair PVC connections 15 mm size with PTMT nuts of length 450 mm,complete all as specified and directed. |
| 39 | S&F in repair PVC connections 15 mm size with PTMT nuts of length 600 mm, complete all as specified and directed. |
| 40 | S&F in repair wall mounted rectangle decorated sides frame work corrosion free looking mirror glass of any size but 6-8mm thick of selected quality glass, including all brass fitting accessories complete all as specified and directed by Engr-in-Charge. |
| 41 | S&F in repairs 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers including glass self assembly complete all as specified and directed. |
| 42 | S&F in repair CP health faucet with 1.20 mtr metalic expandable tube & hook complete all as specified and directed. |
| 43 | S&F in repairs CP Jet spray (Butterfly) with 1Mtr tube Cat No-BEA-17 complete all as specified and directed. |
| 44 | S&F in repair, brass chromium plated shower rose 125 mm size with or without swivel joints, including fixing to steel pipe or union, complete all as specified and directed. |
| 45 | S&F in repair, stainless steel soap dish, complete all as specified and directed. |
| 46 | S&F in repair, brass CP tubular towel rail of 20 mm dia, D type, 60 CM long between flange, fixed in repair complete all as specified and directed. |
| 47 | S&F in repair toilet paper holder of stainless steel fixed to walls complete all as specified and directed. |
| 48 | S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified & directed. |
| 49 | S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/floor with and including clamps, nut bolts including dismantling of old PVC/AC rain water pipe etc. complete all as specified and directed. |
| 50 | S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/floor with and including clamps, nut bolts including dismantling of old PVC/AC rain water pipe etc. complete all as specified and directed. |
| 51 | S&F 110 mm bore PVC (SWR) bends any radius complete all as specified and directed. |
| 52 | S&F 75 mm bore PVC (SWR) bends any radius complete all as specified and as directed. |
| 53 | Taking down chowkhats or frames/ steel windows/ventilators, not exc 1.5 Sqm each (without taking off shutters from the frames) complete all as specified and directed. |
| 54 | Taking down chowkats & shutters without taking off shutters from the frame, size of opening exc. 1.50 sqm but not exc 4 sqm each complete all as specified and directed. |
| 55 | Taking down shutter of area exc 1 sqm but n exc 2 sqm each complete all as specified and directed. |
| 56 | S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain coloured PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification and drawing complete all as specified and directed. |
| 57 | S&F factory made solid panel PVC door shutter 30mm thick (stile), consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded wood grain printed PVC sheet used instead of Plain colour PVC sheet & 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (900 ) used instead of exposed portion of PVC sheet beading, and jointed together with solvent cement, supplying & fixing in the frame at site as per specification and drg complete all as specified and directed. |
| 58 | S&F butt hinges 100mm size extruded aluminium alloy with galvanised mild steel hinges pin anodised and fixed complete all as specified and directed. |
| 59 | S&F aluminium handle 125mm size anodised complete all as specified and directed |
| 60 | S&F aluminium anodised barrel tower bolt of 125mm long extruded section and fixed complete all as specified and directed. |
| 61 | M&L for shutters of any description exc 1 sq. m, but not exc 2 sqm each taking down and refix in same opening after easing and cutting in required length and width with necessary screwing and naling if required. all as specified and directed. |
| 62 | S&F 2nd class soft wood plain, solid chowkats and frames wrought framed rebated on the solid, rounded or chamfered put together with glue, pinned at joints complete, all as specified and directed. |
| 63 | S&F 2nd class hard wood (Hollock) 35mm thick plain framed, factory made panelled shutters (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS-1003 (part – I), kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 64 | S&F glazed and skelton shutter IInd class hard wood 35mm thick,open rebated and prepare to receive glass, gauge etc. (without sash bars) edge of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc and including glazing 3 mm thick and fixing wire cloth complete all as specified and directed. |
| 65 | S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tack or galvanised wire staple complete all as specified and directed. |
| 66 | M&L applying two coats of synthetic enamel paint over a coat of primer including prepration of new or previously untreated wooden surfaces of any description not otherwise described over 10 cm width or girth complete all as specified and directed. |
| 67 | S&F 200mm aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 68 | S&F 150mm aluminium handles, cast type anodised complete all as specified and directed. |
| 69 | S&F 300 mm mild steel sliding door bolts plate type stove enamelled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts,four on bolt plate and two on staple plate and fixed complete all as specified and directed. |
| 70 | S&F aluminium window/ventilator openable/fix type with aluminium anodized frame of section 62.30 x 44.50 x 1.5 mm with shutter stiles rail of aluminum section of size 47.62 x 44.45 x 1.5 mm thick includiing jointing cleat for fixing binder hardware glazing clips rubber packing for air lock purpose anodized aluminum strip bearing screw etc for fixing glass pans in frame shutter covered with fully selected quality tinted glass 5.5 mm thick tinted glass with rubber packing complete including fixing of required 125mm tower bolt & handles etc all as spcified and directed. Make: Jindal/Indal/Hindalco. |
| 71 | S&F anodised aluminium powder coated (minimum 50 micron thickness) door shutter with frame, glazed with 5.5mm thick tinted glass including rubber bead, joining cleat for fixing, aluminium door handle 150mm size and tower bolt 200mm size,where required double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing brass pivot, mortice lock vertical type of mild steel 4 levers of size 100mm etc as mentioned here in below complete all as specified and directed. |
| 72 | S&F powder coated aluminium decorative grill of size of mesh 50mmX50mm fixed with doors, window for safety of glass etc. complete all as specified and directed. |
| 73 | S&F in repair aluminium (Die Cast body) door closer hydraulically regulated designation No 3 universal type suitable for door shutters up to 1000mm in width and of weight between 61 to 80 Kg and fixed complete all as specified & directed. |
| 74 | S&F in repair floor door stopper of size 140mm of aluminium ally body and tongue, anodised, with hard drawn steel spring fixed in floors complete all as specified and directed. |
| 75 | S&F for anodised aluminium frame for doors, windows ventilators (Powder Coated) with one or more rebates including joining cleat for fixing etc. complete all as specified and directed by Engineer-in-Charge. |
| 76 | S&F figured glass 5mm thick , pin head type and glazing with oil putty in square not exc. 0.5 Sqm in each pane complete all as specified and directed. |
| 77 | S&F in repair 20 mm dia stainless steel polished 204 grade drapery rod/curtain rod 1 to 2mm thick with finals decorative, including fixing of brackets and both ends decorative nobs, complete all as speccified and directed as per approved sample by Engr-in-Charge complete all as specified and directed.. |
| 78 | Demolition of cement concrete in ground floors and paving n exc 15 cm thickness (below or above ground level) and removal of debries from MD land complete all as specified and directed.Note : Demolition consider for item No 19 & 20. |
| 79 | M&L for cement concrete 1:3:6, type C-2 (using 40mm graded stone aggregete) as in foundation sub base and mass concrete complete all as specified and directed. |
| 80 | M&L for 75 mm thick cement concrete 1:4:8, type D-2 (using 40mm graded stone aggregate) as in sub base to paving complete all as specified and directed. |
| 81 | M&L for machine pressed precast concrete interlocking paver block any shape and size conforming to IS-15658-2006 of 60mm thickness M-35 Grade with grey cement and pigment complete all as specified and directed by the Engr-in-Charge. |
| 82 | M&L for sand cushning 25mm thick for interlocking tiles complete all as specified and directed by the Engr-in-Charge. |
| 83 | Dismantling of wall and ceiling boards/panels of any type (fiber pulp, insulation, panels etc.) or unsulation boards/slabs, any thickness, including cover fillets complete, all as specified and directed. |
| 84 | S&F aluminiun anodised snap grid ceiling of frame size 600x600mm, main Tee section of size 36.5mmx25mm x1.4 mm thick , cross Tee section of size 23.5mm x26.4 mm x1.4 mm thick, supported at ends all along the wall with aluminium anodised angle of size 40 mm x 25 mm x 2 mm thick and 4mm dia GI suspenders including 4mm thick E board ceiling HPSC fixed to aluminium frame complete as per manufacturer's instructions complete all as specified and directed by the Engineer -in- Charge. |
| 85 | S&F 3mm aluminium composite panel (ACP) sheet of any colour fixing in wall penling, lacades, wall clading including fixing of necessary aluminium frame for fixing sheet and decorated bedding on joints and all corners edges of wall & all joints fill with colored silicon complete all as specified & directed by Engr- in- Charge. |
| 86 | Dismantling timber scantling 40 sqm and over in section in any position as in unframed/framed work complete, all as specified and directed. |
| 87 | M&L 2nd class soft wood (kail) as in scantling clean sawn, complete, all as specified and directed. |
| 88 | S&F 2nd class soft wood plain clean sawn fillets square, rectangular or triangular in section exc 6 & n.exc 13 sqcm secured with nails or brads complete all as specified and directed. |
| 89 | M&L for 6mm thick plywood, grade BWR, type BB, fixed with nails to timber frame work, fixed in wall complete, all as specified and directed. |
| 90 | S&F 6mm thick veneered one side decorative plywood, grade 1 (with BWR resin) fixed with screws on wall complete all as specified & directed by Engr-in-Charge. |
| 91 | M&L for Australlian wood panelling 10mm thick including 9mm thick BWR plywood on the wall and finally finishing with french polish (two or more coats) and fixed complete all as apecified and directed. |
| 92 | Providing and fixing acoustic wall panel in multicolour with lineal perforations and fiber glass acoustical wall panel (in size 2100mm high x 450mm wide) manufactured from high density biosoluble resin bonded glass wool absorb or with a series of textile fabric, plain glass tissue backer and fabric wrapped edges. The wooden slats panels shall be non FR grade with melamine laminate panels 2440mm x 128mm x16mm with 2mm slats at 15 mm pitch, toungue and Groove edges for seamless mounting. The back of the panels fixed wtih 1 acoustical fleece for Sound Absorption. Panel is to be fixed on framework with screw fixed horizontal or vertical to wall at every 600mm with centre & edge bracket in tongue & groove system on framework. The cavity of framework should be inserted with rock wool with 48 kg and 50mm density and alongwith all accessories and direction of Engineer in charge. Make- Armstrong.Note : Works will be inclusive of all the materials, labor, scaffolding, lead, lift, finishing, cleaning, hardwares, etc complete. Contractor shall submit the samples and the Shop drawings to the GE to the commencement of the work for approval. |
| 93 | Providing and fixing acoustic false ceiling Grid System with NRC 85 tiles - Size 600x600 Providing and fixing in position suspended false ceiling grid system with hot dipped galvanized steel pre coated G I angle size 24 x 24 x 0.50 mm thick and 3050 mm long fixed to the brickwall/partition at the perimeter of the ceiling with nylon sleeves and screws at 610 mm centers. Then suspend the main G I \\"T\\" section ( bottom pre coated ) size 38 x 24 x 0.35 mm and 3600 mm long from soffit in one direction with the help of G.I. rod of 4mm diameter 6mm nylon raw plug at 1220 mm centers G I cross \\"T\\" section (bottom pre coated ) size 28 x 24 x 0.35 mm and 600 mm long is insert fixed into the slots provided in main 'T' at 600 mm centers to form 595 x 595 mm grid and lay the 595mm x 595mm Square edged Glasswool/ Rockwool/ Mineral wool board of thickness 15 mm or higher with a minimum RH factor 0.95 and provide universal holding clip over the tiles. Rate includes making provision for fixing light fixtures, smoke detectors and trap doors with locking arrangements works will be inclusive of scaffolding and staging at all levels. Make : Armstrong.Note : Works will be inclusive of all the materials, labor, scaffolding, lead, lift, finishing, cleaning, hardwares, etc complete. Contractor shall submit the samples and the Shop drawings to the GE to the commencement of the work for approval. |
| 94 | M&L for fixing Auditorium/ Cinema hall floor carpet-polypropylene, special shaped, 8-10 mm thick, Non sliperry, easy to clean, Antique printed design, action backing material with hand tufed technics, including fixing arrangements rod & clits on steps, corners etc complete all as specified & directed by Engr-in-Charge |
| 95 | M&L for fixing solar control film 50 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified & directed by Engr-in-Charge |
| 96 | Taking down cement or cement lime plaster of any description and any thickness on brick ,concrete or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc.complete all as specified and directed. |
| 97 | M&L for rendering 15 mm thick cement plaster in CM 1:4 on fair faces of brick or concrete surfaces and finishing the surface even and smooth (without using extra cement) etc.complete all as specified and directed. |
| 98 | Material and labour for rendering 12 mm thick cement plaster in CM 1:6 on fair faces of brick or concrete surfaces and finishing the surface even and smooth (without using extra cement) etc,complete all as specified and directed. |
| 99 | M&L for rendering 5 mm thick cement plaster in CM 1:3 on fair faces of concrete surfaces in ceiling ,complete all as specified and directed. |
| 100 | M&L for preparation of new plastered surfaces of walls and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. |
| 101 | Complete removal of existing treatment and preparation of old plastered / unplastered surfaces of walls/parapats and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. |
| 102 | M&L applying 1-2 mm thick wall care putty (JK/Birla/berger) on internal & external wall surface, including making surface even and smooth using sand paper before applying priming coat, complete all as specified and directed. |
| 103 | M&L for prepration of new plastered surfaces of ceiling and applying three coats of white wash, complete all as specified and directed. |
| 104 | M&L for prepration of old plastered surfaces of ceiling and applying two coats of white wash, complete all as specified and directed. |
| 105 | M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper acrylic/distemper oil emulsion acrylic, white or tinted over a coat of primer of same make complete all as specified and directed by Engineer-in-Charge. |
| 106 | M&L for complete removal of existing treatment and preparation of old plastered surfaces of walls and applying two coats of Oil bound distemper acrylic /distemper oil emulsion acrylic , white or tinted over a priming coat of same make on wall surfaces complete all as specified and directed by Engineer-in-Charge. |
| 107 | Dismantling of mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 108 | S&F framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars shutters (openable for windows); barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 109 | M&L for preparation of new steel surfaces of any description not otherwise described over 10cm width or grith and applying two coats of synthetic enamel paint over a coat of red oxide primer exposed to view surfaces complete all as specified and as directed. |
| 110 | Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 111 | S&F pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 112 | S&F pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 113 | S&F 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof/wall cadding, wall etc. complete all as specified and directed. |
| 114 | Dismantling of post or struts any type and any section including taking out embeded portion of concrete and making good distrubed ground complete all as specified and directed. |
| 115 | S&F mild steel work such as in angle iron, square/rectangular tubes, flat iron fillets etc for horn, fixing of barbed wire to RCC post, securing wire mesh/sheet etc. including all necessary cuttings, drilling, bolting or riveting etc, including necessary welding where requirement complete, conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 116 | M&L for providing and fixing stainless steel (Grade 304) railing/gates made of hollow tubes, channels, plates, nobs etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size complete all as specified & directed. |
| 117 | M&L for cement concrete 1:2:4, type B-2 (using 40mm graded stone aggregete) as in foundation and mass concrete of fixing steel posts or other similar works complete all as specified & directed. |
| 118 | S&F in repair urinal partitions in modular HPL boards of any colour of size 450x900x12 mm complete all as specified & directed by Engr-in-Charge. |
| 119 | S&F in repair Auditorium push back recliner modern design Chair (Sofa type) with luxurious comfort of approved colour having CTC of 26\\" in row with arms and cup holders, chair fully upholstered in standard foam laminated fabric, sturdy wooden including fixing arrangements complete all as per manufacture specification complete all as specified and directed.Make : Wipro (Model: Wipro Opera with headrest-HB) or equivalent model of Godrej and Geeken. |
| 120 | S&F in repair Auditorium push back recliner modern design Chair with luxurious comfort of approved colour having CTC of 24\\" in row with PU waterfall, PP cup Holder, wooden and tip up mechanism, chair fully upholstered in standard foam laminated fabric, sturdy wooden including fixing arrangements complete all as per manufacture specification complete all as specified and directed.Make : Wipro (Model: Wipro Opera with headrest-HB) or equivalent model of Godrej and Geeken. |
| 121 | S&F in repair Auditorium push back recliner modern design Chair with luxurious comfort of approved colour having CTC of 21\\" in row with PU water fall arms-22c and PP cup holders, wooden and Flumatic slider mechanism for superlative comfort, chair fully upholstered in standard foam laminated fabric, sturdy steel frame and flange plate for grouting legs grounted special box office fabric including fixing arrangements complete all as per manufacture specification complete all as specified and directed.Make : Wipro (Model: Opera) or equivalent model of Godrej and Geeken.Note for item No 119 to 121 : Contractor to quote his unit rates for these items as per approved design, colour and pattern which is held with AGE B/R-I, 864 EWS. Contractor is advised to visit AGE B/R-I office and get himself apprised with all the provision of these items before quoting bid. No representation with regards to nin availability or otherwise of these chairs shall be entertained and Contractor shall procure/ get these chairs manufactured at his own cost. |
| 122 | M&L for taking down carefully existing old burnt out / unserviceable aluminium / copper point wiring system any type/ size and any description complete for light, fan,bell,socket, power points etc complete including removing the all type of fittings & fixture alongwith it connected fixing acessories such as all switches, sockets, ceiling roses, holder,regulators,bell etc complete and removing of all the old materials from the site for to taking as a schedule of credit complete all as specified and directed by EIC . |
| 123 | M&L for point wiring complete with stranded copper conductor 1.5 Sqmm (nominal area) PVC insulated unsheathed cable up to 1100 V grade, PVC Conduct FRLS conforming to IS - 694 multistranded Conceled with new sunk type pressed steel terminal boxes suitable for MODULAR switches including fixing/grouting sunken/ surface as per site requirement covered with suitable modular white cover plate for suitable size for mounting of MODULAR switches, regulators and drawing continuous earth wire with one run of 1.5 Sqmm (nominal area) PVC insulated unsheathed cable up to 1100 V grade FRLS conforming to IS - 694 multistranded copper conductor as earth wire and connecting to common earth dolly and making good the disturbed wall surfaces to match with the existing surfaces one light/ Bell point controlled by one, one way switch 5 Amps, SP, one Ceiling Fan / Wall fan /Exhaust fan point controlled by one, one way switch and regulator complete all as specified and directed. |
| 124 | All as per ser item No 123 here-in-before but One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board . |
| 125 | All as per ser item No 123 here-in-before but One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board. |
| 126 | All as per ser item No 123 here-in-before but using FRLS PVC insulated, multistranded unsheathed copper conductor cable of size 2.5 square mm and drawing through PVC conduit of 20mm dia with accessories on concealed in wall/roof along with one run of 2.5 square mm FRLS PVC insulated unsheathed copper conductor earth dolly, connecting to main board duly making good the disturbed wall surfaces to match with the surroundings complete all as specified and directed. |
| 127 | S&F modular switch 1 way 6 A, 1 module capacity 230 Volts complete all as specified and directed. |
| 128 | S&F modular socket 5 pin 6 Amps 2 module 230 Volts complete all as specified and directed. |
| 129 | S&F modular socket 6 pin 6/16 Amps 2 module 230 Volts complete all as specified and directed. |
| 130 | S&F switch modular 1 WAY 16 Amps, 230 Volts complete all as specified and as directed. |
| 131 | S&F electronic ceiling fan regulator modular 5 stepped type heavy duty suitable to work on 230 Volts complete all as specified and directed. |
| 132 | S&F ceiling rose three terminal surface bakelite type AC 50 Hz 230 Volts of size 65 x 50 mm complete all as specified and directed. |
| 133 | S&F in renewal LED tube light fitting of 1x 20W/22W 220V AC decorative box type with driver, holder including LED tube light with having energy efficient type use in both warm/white type colour complete including providing of suitable type flate fexible cable for electric connection from ceiling rose to fitting comlplete and including taking down of old fitting all as specified & directed. |
| 134 | S&F LED mirror light fitting with high out put diffuser 2 feet long of 10 Watts 220 Volts AC decorative type with driver holder and LED lamp with having energy efficient type use in both warm/white type colour complete light fitting set and including providing of suitable type flat flexible cable for electric connection from ceiling rose to fitting and making electric connection and including taking down of old existing fitting, complete all as specified and directed. |
| 135 | S&F of recessed / ceiling concealed mounted flate slim type unique square LED luminaire panel type fitting of size 600 mm x 600 mm of rating capacity in 35W/36Watt 220 Volts AC recessed type with high efficiency PMMA didduser soft glare free light complete with driver, holder & LED lamps suitable used for roof ceiling and required fitting use in both warm/white type colour complete including cutting /making suitable size of hole on wooden ceiling board surface area for fixing/intallation of ceiling light fitting purposed complete work and providing of suitable type of flate fexible two/three core cable and making electric connection complete all as specified & directed. |
| 136 | S&F recessed/ceiling concealed mounted down lighter light fitting of round/Square flate shapes decorative type with high efficiency PMMA fiffuser soft glare free light with drivers & LED luminaire of rating capacity in 15 Watts to 18 Watts 220 Volts AC complete light fitting set all as per existing fitting type/ size of sample /model and make and including making in cutting or additional extra corner cutting work on existing hole of ceiling surface (when if required at site) for setting & fixing of new light fitting complete including making in additional extra corner cutting work on existing hole of ceiling surface (when if required at site) for setting & fixing of new light fitting complete and also providing of suitable type of flate fexible two/three core cable and makong electric connection and including taking down of old fitting all as specified and directed. |
| 137 | S&F in repair LED Bldg Security light luminaire fitting of 1x35 watts with deep drawn housing including all accessories with suitable 40 mm dia GI bracket 0.60 Mtr length fixed on wall with 50x6 mm flat iron, clamps, nuts and bolts complete all as sepcified and directed. |
| 138 | S&F seat Indication light, rectangle type, size mm: 120x60x15, Color: Red complete all as sepcified and directed. |
| 139 | S&F EXIT, LED display light with SMPS, box type complete all as sepcified and directed. |
| 140 | S&F 12V,8A , 100 Watts SMPS, complete all as sepcified and directed. |
| 141 | Supplying, installation, testing and commissioning of LED Marquee Alphabet Light made of metal/acrylic body with warm white LED lamps, complete with wiring, driver, mounting accessories and all required fittings.” complete all as specified and directed. |
| 142 | S&F ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 Volts, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) with hanging in Celling with down rod, clamps, nut bolts in proper manneer at the centre of room complete all as specified and directed & Exiting fan carefully taking and deposit MES store Yard complete all as specified and directed. |
| 143 | S&F exhaust fan, plastic body AC single phase. 230V of size 300m sweep with, blades, and frame and louvers and making hole of any size on wall or wooden frame work for fixing of wall fan all as specified and directed. |
| 144 | S&F storage type Water heater (Geyser) 5 star of Cap 25 Ltrs working on 230 Volts AC supply with in and out going water connection pipe (Hot & Cold) fixing arrangement with nut bolts and making good the disturbed surface all as specified and directed. |
| 145 | S&F of sheet metal enclosure box duly powder coated & framing work with locking system and having double door fixing arrengment system suitable of size/type for vertical type distribution board vertical loadline type of rating VTPN 4 way type 415 volt 3 phase AC supply holding system with IP protection rating with ISI marked and having fitted neutral and earth link bus bar and mounting base chanels and blanking plates suitable for holding of main MCCB as incommer and out going MCB complete system alongwith providing and mounting in side of DB box of 01 No of MCCB TP 160 Amps with breaking rupting capacity 25 KA and having adjustable setting type and also providing of 08 Nos of MCB SP 63 Amps 10KA 'C' curve type of the same manufacture make as per of distribution board make complete set and including dully fixed surface on wall or concealed in wall and making all necessary electrical and also refixing the electric meter and its wiring connection including taking down of existing meter and DBs complete all as specified and directed by EIC. |
| 146 | S&F sheet metal enclosure box duly powder coated & framing work with locking system and having double door fixing arrangment system suitable of rating of size/type of distribution board SPN 8 way type 220 Volts AC supply system with IP-43 protection system and having mounting chanel with having suitable rating of copper bus bar and suitable size of common neutral and earth link and also making all necessary electrical connection and duly fixed surface on wall or conceled in wall with the help of cutting chases to wall for fixing of DB and making good the disturbed wall surface complete all as specified and directed. |
| 147 | S&F sheet metal enclosure box duly powder coated & framing work with locking system and having double door fixing arrangment system suitable of rating of size/type of distribution board SPN 12 way type 220 Volts AC supply system with IP-43 protection system and having mounting chanel with having suitable rating of copper bus bar and suitable size of common neutral and earth link and also making all necessary electrical connection and duly fixed surface on wall or conceled in wall with the help of cutting chases to wall for fixing of DB and making good the disturbed wall surface complete all as specified and directed. |
| 148 | S&F of sheet metal enclosure duly powder coated with single pole and neural enclosure with having a two pin and earth plug & top and mounting chanel alongwith one 01 MCB SP 20 Amps and dully fixed surface on wall or concealed in wall and making all necessary electrical connection including taking down of existing DBs a as required at site or directed complete all as specified and directed. |
| 149 | S&F MCB SPN 63 Amps, 240 Volts, with breaking capacity 10 kA rupturing capacity, 'C' series 50 HZ AC supply and also making suitable size/type of electric wiring connection complete all as specified and directed. |
| 150 | S&F MCB SP 40 to 63 Amps, 240 Volts, 10 kA rupturing capacity 'C' series 50 HZ AC supply and also making suitable size/type of electric wiring connection complete all as specified and directed. |
| 151 | S&F MCB SP 06 to 32 Amps, 240 Volts, 10 kA rupturing capacity 'C' series 50 HZ AC supply and also making suitable size/type of electric wiring connection complete all as specified and directed. |
| 152 | S&F sub main wiring with two runs PVC insulated FRLS wire, 1100 Volts grade with multistranded copper conductor wire single core of size 2 runs of 1.5 Sqmm and 1 run of 1.5 Sqmm (Nominal area) (ISI Marked) any type any length drawn through in heavy duty ISI marked PVC Casing capping / PVC conduit of suitable size along with its all fittings and connected accessories and duly fixed concealed in wall or surface on wall and making good all disturbed surfaces match to the existing surface complete all as specified and directed.Note: 3 runs of cable and one run of conduit/ casing capping shall be measured and paid as one unit. |
| 153 | S&F sub main wiring with two runs PVC insulated FRLS wire, 1100 Volt grade with multistranded copper conductor wire single core of size 2 runs of 2.5 Sqmm and 1 run of 2.5 Sqmm (Nominal area) (ISI Marked) any type any length drawn through in heavy duty ISI marked PVC Casing capping / PVC conduit of suitable size along with its all fittings and connected accessories and duly fixed concealed in wall or surface on wall and making good all disturbed surfaces match to the existing surface complete all as specified and directed.Note: 3 runs of cable and one run of conduit/ casing capping shall be measured and paid as one unit. |
| 154 | M&L for sub main wiring with two runs of single core FRLS PVC insulated, multistranded unsheathed copper conductor cable of size 10 square mm and drawing through PVC conduit of 20mm dia with accessories on concealed in wall/roof along with one run of 10 square mm FRLS PVC insulated unsheathed multi stranded 1100 Volts grade with copper conductor cable as earth continuity conductor connected to earth and earth dolly, connecting to main board duly making good the disturbed wall surfaces to match with the surroundings complete all as specified and directed. |
| 155 | Supply, laying and testing of LT cable XLPE insulated screened, PVC bedded galvanized steel strip or wire armoured electric power cable (heavy duty) with aluminium conductor 1100 Volt grade cross sectional area of size 35sqmm 3½ core including laid in trenches or fixing on poles or passing through pipes complete including taking out of old unserviceable cable any type any size complete all as specified and directed. |
| 156 | Supply, laying and testing of LT cable XLPE insulated screened, PVC bedded galvanized steel strip or wire armoured electric power cable (heavy duty) with aluminium conductor 1100 volt grade cross sectional area of size 50 sqmm 3½ core including laid in trenches or fixing on poles or passing through pipes complete including taking out of old unserviceable cable any type any size complete all as specified and directed. |
| 157 | Supply, laying and testing of LT cable XLPE insulated screened, PVC bedded galvanized steel strip or wire armoured electric power cable (heavy duty) with aluminium conductor 1100 Volt grade cross sectional area of size 70sqmm 3½ core including laid in trenches or fixing on poles or passing through pipes complete including taking out of old unserviceable cable any type any size complete all as specified and directed. |
| 158 | Supplying, laying, jointing and testing of 80 mm dia SDP pipe of approved make, including all necessary fittings, clamps/supports, excavation, refilling and making good the disturbed surface, complete all as specified and directed by Engineer-in-Charge. |
| 159 | Excavation in trenches, not exc 1.5 m wide and not exc 1.5 m in depth; for laying of cables, pipes etc. and getting out all excavated material in any type of soil complete all as specified and directed. |
| 160 | Returning, filling in and including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed. |
| 161 | Removing of excavated surplus soil to a distance not exc 50 m and depositing where directed at a level not exc. 1.5 m above the starting point complete all as specified and directed. |
| 162 | M&L of locally available river sand filling in trenches below and above / around UG cable for cable protection, in duct under & above the cables including punning around cable complete all as specified and directed.Note - Punned thickness shall only be measured and paid. |
| 163 | M&L for providing of new sub class 'B' bricks, old size, well burnt laid flat dry for protection of under ground cable complete all as specified and directed. |
| 164 | Road cutting, excavation of trench, providing and laying sand cushioning/bedding, laying of cable/conduit, refilling, compaction and restoration of road surface complete all as specified and directed by Engineer-in-Charge. |
| 165 | Supply and laying GI pipe 'light grade' 80 mm in trenches, under floors, roads, along poles for protection of cables with all necessary fittings and sealing ends complete all as specified and directed. |
| 166 | S&F of 300W LED profile spot 19 degree light complete with 3200K CCT colour temperature COB LED source from Citizen/ Philips/ Osram/ Cree or reputed make (LM80 to be provided) CRI & TLCI above 95, Strobe option Adjustable 1 ~ 25 times / Sec 4 Kinds of dimming curves, Black finish housing, Manual Focus with 4 Beam shaping cutters Efficient and well-designed Lamp reflector Efficient Copper tube based Heat Sink for Heat Dissipation Sleek and Unique Designed Light weight body Fixture provided with Yoke of Manual Adjustment DmX 512 dimming with 1 or 3 Channel modes IP20 protection having Lux @ 3 Mtrs above 12040 suitable to illuminate the key presentor or talent on stage. RDM Control options with latest technology (RDM ID to be specified) Certification having BIS compliant to IS 10322 (Part 5/ Sec 1):2012 . CE Certification compliant to EN60598-1:2015, EN61437-2-13:2014 LM79 Certificates from NABL Acrediated laboratory. Brand embosed impact on the light body for genuine product |
| 167 | S&F of 400W LED blinder light 30 Degree complete with 3200K CCT 4x100W Chip On Board LED Lamp source COB LED source from Citizen/ Philips/ Osram/ Cree or reputed make (LM80 to be provided) DmX 512 dimming with 4 /8 Channel modes CRI & TLCI Value > 90 , Strobe option Adjustable 1 ~ 25 times / Sec Variable, Beam Angle 30 Degree Total Power Consumption of 420W 11.7KHz Refresh Rate, In built preset’s for effects Fuse and Internal safety protections, Active Cooling with Low Noise Fan, 5 Pin XLR for DmX, High quality well designed inbuilt reflector, Flicker Free 100% for Tv & Film Cameras, Black finish housing, IP20 protection, Having Strobe option and smooth dimming,illuminate Stage with uniform light intensity levels. RDM Control options with latest technology (RDM ID to be specified)Certification having BIS compliant to IS 10322 (Part 5/ Sec 1):2012 CE Certification compliant to EN60598-1:2015, EN61437-2-13:2014 LM79 Certificates from NABL Acrediated laboratory |
| 168 | DMX controller for the stage lights complete all as specified and directed. |
| 169 | Signal Cable, lights mounts, safety chain, connetors and other associated accessories complete all as specified and directed. |
| 170 | Freight charges complete all as specified and directed. |
| 171 | Installationa and programing charges complete all as specified and directed. |
| 172 | M&L for earthing work complete with galvanised steel earth plate electrode 60 Cm X 60 Cm X 6 mm thick buried directly in ground vertically to a depth not less than 2.25 mtr deep below ground level with top edge of earth plate at a depth not less than 1.5 m below normal ground level and connected to galvanised earth lead wire 4.0 mm dia by means of bolts, check nuts and washers of galvanised steel and to be protected by GI pipe 15 mm bore light grade & connected to earth test point/main switch board or main control board and also providing charcoal or coke and salt in alternative layers, necessary excavation and earth work in any type of soil all as shown in Electrical Plate No 3 of SSR part -I. and also making arrangment of 20 mm dia bore galvanised iron pipe (medium grade) for water and making funnel, wire mesh,and also including provision of concrete pit cover framing work in PCC 1:2:4 type B-1 (using 20mm graded of stone aggregate) with XPM (weight not less than 4 Kg/Sqm) and outer frame work of angle iron 25x25x6mm with top concrete pit cover and handle for lifting of cover work complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysAug 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 27 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender