Tender For Addition Or Additional To Offrs Mess Complex At 19 Fbsu Under Ge(Af) Thoise
Tender Value
43.48 Lakhs
Estimated cost
Bid Submission
20 Jul 2026
16 days left
EMD
86960
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
LADAKH → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Addition Or Additional To Offrs Mess Complex At 19 Fbsu Under Ge(Af) Thoise
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of concrete of any description and in any position not other wise specially provided for cement concete (unreinforced) and all as specified and directed. |
| 2 | M&L Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface. |
| 3 | M&L Cement concrete 1:4:8 type D2(using 40 mm graded stone aggregate) 100 mm thick as in sub base all as specified and as directed. |
| 4 | M&L Laminated wood flooring in size 1214mm x 193mm x 8mm thick, including skirting, floor brakers etc, as per manufacutred instruction with a layer of foam backing, complete all as specified and as directed. |
| 5 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing debries out side defence area complete all as specified and directed. |
| 6 | M&L Non - skid coloured Ceramic tiles (400x400mm) 7 to 8 mm thick , dark shade (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including cement screed bed 15mm thick in screed bed (1:4) base, complete all as specified. |
| 7 | M&L Coloured glazed ceramic tiles (300x 450x 7mm thick) in vertical surfaces and jointed in neat cement slurry and pointed in white or coloured cement to match including rendering 10mm thick in cement plaster 1:4 complete all as specified and as directed. |
| 8 | Excavating in trenches in hard dense soil n.exc 1.5M wide and n.exc 1.5M in depth for foundation, laying pipes, cables etc n.exc 10Sqm on plan and n.exc 1.5M in depth and getting out in hard dense soil concrete all as specified and directed. |
| 9 | M&LCement concrete type D2 1:4:8 (40mm graded aggregate) in foundation, filling and mass concrete all as specified and directed. |
| 10 | M&L RCC Nominal mix type B-0 1:2:4 (12.5 mm graded crushed stone agg) as in foundation, indl raft, footing foundation beams, plinth beams bases for columns, etc basement slab, under ramed piles and mass concrete all as specified and directed. |
| 11 | M&L RCC Nominal mix type B-0 1:2:4 (12.5 mm graded crushed stone agg) as in Beams, cantilevers, bressummers, lintels over 1.5m span all as specified and directed. |
| 12 | M&L RCC Nominal mix type B-0 1:2:4 (12.5 mm graded crushed stone agg) as in Columns, pillars, piers, posts all as specified and directed. |
| 13 | Form work to sides of concrete foundations, footings, bases of columns, sides and soffits of foundation and plinth beams and similar work vertical or batter all as specified and directed. |
| 14 | Form work to sides of pillars, posts and columns all as specified and directed. |
| 15 | M&L TMT bars 10 mm dia and over cut to length and bent to shape required including cranking, bending spirally for hoping for columns, hooking end and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed. |
| 16 | All as per ser item No.15.00 above but 5mm dia and over upto and including 10mm dia as in stirrups spacer and binders complete all as specified and directed. |
| 17 | Demolition of brick work or stone/boulder masonry built in cement mortor or cement lime mortor incl all quoins,arches,pillars etc all as specified and directed |
| 18 | M&L Pre cast cement concrete block type C1 in 1:3:6 Using 20 mm graded stone aggregate exc 10 CM in width and setting in CM 1;6 all as specified and directed. |
| 19 | M&L Rendering 15mm thick on fair faces of brick work in CM 1:4 finished even and smooth with out using extra cement complete all as specified and directed. |
| 20 | M&L Rendering 10mm thick on fair faces of brick work in CM 1:6 finished even and smooth with out using extra cement complete all as specified and directed. |
| 21 | M&L Preparing newly plastered or unplastered surface of walls and applying two coats of cement base paint including priming complete all as specified and directed. |
| 22 | M&L Preparation of newly plastered surface of wall including Chalk whiting, on plastered surfaces etc and applying two coat of white wash on walls, complete all as specifed. |
| 23 | Returning, filling including spreading, watering and well ramming in layers n.exc 25 CM in hard/dense soil all as specified and as directed. |
| 24 | Removing excavated material to a distance exc 250 mtr but not exc 500 mtr depositing where directed all as specified and as directed. |
| 25 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 26 | M&L for mild steel for wind ties for roof including securing bolts, screwing etc. & for doors, balusters, nosing to steps including embeding in concrete and posts and struts including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed. |
| 27 | S&F Roof trusses (framed), trussed purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conferming to Fe 410W (gde -E-250) quality A all as specified and as directed. |
| 28 | S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut dia 16 to 20mm and exc 22.5cm but n exc 30cm long all as specified and as directed. |
| 29 | S&F Mild steel Plates (plain or chequered) channels, square cut or notched(ordinary and counter sunk) forming holes, without any attachment conferming to Fe 410W (gde -E-250) all as specified and as directed. |
| 30 | Preparation of new steel surfaces of any description, over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 31 | Dismantling plain or corrugated steel sheeting any gauge, thickness, including nainital or similar pattern roof covering etc complete all as specified and directed. |
| 32 | S&F 0.63 mm thick Galvanised, corrugated mild steel shetting with two corrugations side lap, fixed with coach screws, washers, and L - type or J-type or cranked hook bolts in lieu of screw in roof sheeting, walls etc. with grade of zinc coating 275 etc all as specifed. |
| 33 | S&F 0.63 mm thick plain Galvanised, mild steel shetting in ridges, hips, vally gutters, drip, straight flashing & fixed with coach screws, washers, and L-type or J-type or cranked hook bolts in lieu of screw in roofs, walls etc. (length and girth as fixed) with grade of zinc coating 275 etc all as specifed. |
| 34 | M&L for preparation of new zinc (or galvanised) comouflage pattern surfaces to receive painting, by a coating with mordant solution including washing and cleaning and applying two coat synthetic enamel paint over a coat of zinc crome, red oxide etc all as specified. |
| 35 | M&L 75 mm thick PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in plinth protection, finished even and fair without using extra cement, complete all as directed. |
| 36 | Dismantling timber framed work scantlings 40 sq.cm and over in section, in any position etc. all as specified. |
| 37 | M&L Second class hard wood in scantlings, clean sawn timber fixed complete all as specified and as directed. |
| 38 | Dismantling of wall and Ceiling boards (fibre, pulp insulation, etc) or insulation boards /slabs /blankets, any thickness, including cover fillets, complete all as specified and as directed by Engr-in-Charge. |
| 39 | Providing and fixing WPC (Wood Plastic Composite) decorative wall panelling of approved make, colour and design, minimum 10–12 mm thick fluted/solid panels, fixed over framework of aluminium/GI sections or treated wooden battens 50 × 25 mm size placed at 600 mm centre to centre, firmly fixed to wall with suitable rawl plugs, screws and fasteners.Panels shall be fixed with stainless steel screws/clips, including edge trims, corner mouldings, joining strips and finishing accessories, complete with cutting, fitting and proper alignment, complete all as specified and directed by the Engineer-in-Charge.(Rate shall include framework, hangers, fasteners, screws, accessories, labour and scaffolding) |
| 40 | Providing and fixing WPC (Wood Plastic Composite) decorative ceiling panelling of approved make, colour and design, minimum 10–12 mm thick panels, fixed over GI/Aluminium framework consisting of main runners and cross members at 600 mm centre to centre, suspended from RCC slab/roof with GI hangers, cleats, nuts, bolts and fasteners.Panels shall be fixed with SS screws/clips, including edge trims, finishing strips and accessories, complete with cutting, fitting, levelling and proper alignment, complete all as specified and directed by the Engineer-in-Charge.(Rate shall include framework, hangers, fasteners, screws, accessories, labour and scaffolding complete all as specified and as directed by Engr-in-Charge.Make-:Century ply/ Alstone Industries/ Floresta/Green Plast WPC/Amulya Mica |
| 41 | Dismantling of cast iron/PVC pipes 100/75 mm dia, jointed in cement mortar from walls and taking out of trenches, if required, complete all as specified and directed. |
| 42 | S&F PVC SWR pipes single socketed, in any length, 110 mm dia, with rubber ring joints laid in trenches or in floors, complete all as specified and directed. |
| 43 | S&F PVC SWR pipes single socketed, in any length, 75 mm dia, with rubber ring joints laid in trenches or in floors , complete all as specified and directed. |
| 44 | S&F 110mm PVC(SWR) bends any radius, with/without oval access door, complete all as specified and directed. |
| 45 | S&F 75mm PVC(SWR) bends any radius, with/without oval access door, complete all as specified and directed. |
| 46 | S&F 110mm PVC (SWR), Junction single, (Single T) equal or unequal), fixed with solvent cement,with/without oval access door, complete all as specified and directed. |
| 47 | S&F 75mm PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and directed. |
| 48 | S&F 100mm PVC (SWR),PVC (SWR) vent cowl, fixed with solvent cement, complete all as specified and directed. |
| 49 | Taking down GI/PVC/PP-R pipe of size 15mm bore and connection including cleaning for refixing or removal to store complete, all as specified & directed. |
| 50 | S&F 20 mm bore 3-layer PP-r Polytheyene random copolymer conceled pipes SDR 7.4 (PN-16) UV stabalised and anti microbial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypro-pylene complete to walls celling or in floor including making good disturbed surfraces of wall, floor roof complete all as specified and directed. |
| 51 | S&F in repairs chromium plated fancy type 15 mm Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 52 | S&F in repairs 15mm bore fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 53 | Supply & fixing in repairs 15mm Stop valves, fancy type Chromium plated, cast copper alloy,screwed down,high pressure,with crutch or butterfly handle,screwed both ends for iron pipe or for unions and fixed complete, all as specified & directed by Engineer-in-charge. |
| 54 | Supply & fixed (in repair) vitreous china wash hand basin white flat back of size 550x440mm including CI brackets and PVC connection 450 mm long having PTMT nuts and chromium plated waste coupling and making good to disturbed portion including 32 mm dia PVC waste pipe and pedestal etc., complete all as specified. |
| 55 | S&F in repairs soap dish any type, fixed to plugs with chromium plated brass screws complete all as specified and directed. |
| 56 | S&F in repairs PVC connections 15mm size with PTMT nuts of length 300mm complete all as specified and directed. |
| 57 | S&F sheet glass assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and as directed. |
| 58 | S&F in repairs 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers. |
| 59 | S&F Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern ) including PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) for fixing of WC and making good floor to match the existing surface, complete all as specified and as directed by Engr-in-Charge. |
| 60 | S&F in repairs 10 litres capacity PVC valveless syphonic action type low level flushing cistern white with inlet, ball valve, float and handle including brackets complete all as specified and directed by Engineer-in-Charge. |
| 61 | S &F in repair Tubular towel rail, 20mmdia, D type, 60cm long between flange all as specified and as directed by Engr in Charge. |
| 62 | S&F in repair jet pressure of chromium plated, complete all as specified and as directed by Engr-in-Charge. |
| 63 | S&F in repair health faucet of chromium plated, complete all as specified and as directed by Engr-in-Charge. |
| 64 | S&F in repairs aluminium powder coated curtain rod of 20mm dia decorative type all as specified and directed. |
| 65 | S&F in repair Brackets Aluminium anodies for curtain rod 20mm dia all as specified and directed. |
| 66 | S&F in repairs Brass CP three way wall Mixer for mixing hot & Cold water screwed down for iron pipe and fixed all as specified and directed. |
| 67 | S&F in repairs 100mm dia Overhead Shower alongwith 190mm long shower arm casted, fixed to 15mm bore pipe or union all as specified and directed. |
| 68 | S&F in Repairs Toilet paper holder fancy type as selected,specified and directed by Eng-in-charge. |
| 69 | S&F glass corner shelf 300 mm (with ABS Bracket 300x 600) as selected,specified and directed by Eng-in-charge. |
| 70 | S&F in repairs PUF Insulated tank capacity 1000 Litres,including ball valve complete all as specified and as directed by Engr-in-Charge. |
| 71 | Taking down chowkats or frames with shutter (without taking off shutter from the frames), area exceeding 1.5 Sqm and not exceeding 4.00 Sqm each, complete all as specified. |
| 72 | Supply & fixing factory made PVC door frame of wall thickness of 5 mm made out of extended 5 mm rigid PVC plain sheet cut at corner and jointed with 02 Nos., 150 mm long brackets of size 15 mm x 15 mm mild steel square tubes 19 gauge including vertical door profiles reinforced with 19 mm x 19 mm steel square tube of 19 gauge (EPDM) rubber gasket weather seal provided through out the frame and fixed to wall with 65/100 mm long mild steel screws through the frame by using PVC fasteners (minimum of 04 Nos. of screws to be provided for each vertical number & minimum 02 Nos. for horizontal member), complete all as specified. |
| 73 | Supply & fixed Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 with particle board core raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing all as directed. |
| 74 | S & F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with fullbody threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Ditto but of frame size 65 X100mm completeall as specified and as directed. |
| 75 | S & F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 35mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borerproof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 76 | S&F powder coated anodised Aluminium alloy sections door frame weight 2.863 Kg/Rm and 12mm Toughened glass shutter Jindal or equivalent duly fitted with neoprene beading, glazing clips, glass panes 12 mm nominal thickness aluminium alloy handles etc. complete all as specified and directed. |
| 77 | S&F powder coated aluminium sliding window of 3 tire, frame of section 62mm X 32mm X 1.47 mm or appropriate equivalent section and shutters of section 18 mm X 44 mmX 1.35 mm or appropriate equivalent section fixed with 4 mm thick tinted sheet glass with rubber gasket, handles, locking arrangement and aluminium wire mesh,aluminium powder coated any colour deco grill 6mm dia incl making good jambs, cills etc complete all as specified and directed by the Engr-in-Charge. |
| 78 | S&F in powder coated aluminium fixed louvered ventilator, frame of section 63.5mm X 38.1mm X 1.01 mm or appropriate equivalent section with 4 mm thick figured/frosted sheet glass with rubber gasket,Aluminium wire mesh, handles, locking arrangement etc incl making good jambs, cills etc and including taking down old iron ventilator complete all as specified and directed by the Engr-in-Charge. |
| 79 | S&F in Aluminium (Diecast) body door closer hydraulically regulated, designation No.3, universal type, suitable for door shutter of 851 to 1000mm in width complete all as specified and directed. |
| 80 | S&F 150mm long extruded aluminium alloy handles, fabricated type, anodised complete as specified and directed . |
| 81 | S&F 200mm long aluminium anodised barrel tower bolts of extruded section .complete as specified and directed . |
| 82 | Supply & fixing 250 mm aluminum anodised sliding door bolts, ISI marked, with hasp, staple (bolt type) complete with clamps bolt not less than 16mm dia and fixing clips of sheet, cast or extruded section and fixing bolts an sliding bolt of extruded section or cast aluminum alloy, complete all as specified. |
| 83 | S&F butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21, 100mm long complete all as specified and directed. |
| 84 | Material and labour in repair for point wiring with two single core 1.5 sqmm cable (nominal area) stranded copper conductor, PVC insulated unsheathed cable, 1100 V grade in and including concealed PVC conduit of size not less than 20mm dia with sunken type pressed steel terninal box 1.6 mm thick of suitable size, duly painted with one coat of red oxide primer and two coats of black bituminous paint for mounting fittings/ junction boxes and wiring to be terminated in pressed steel sunken boxes including all accessories and using single core 1.5 Sqmm (nominal area) stranded copper conductor, PVC insulated unsheathed cable as in earth wire (green colour) connected to common earth dolly for One light point controlled by one switch complete all as specified and directed. |
| 85 | All as per ser item No. 84. 00 above but for One 3 pin switch socket outlet point 5 Amps on same board complete all as specified and directed. |
| 86 | All as per ser item No. 84. 00 above but for One 3 pin switch socket outlet point 5 Amps on independent board complete all as specified and directed. |
| 87 | All as per ser item No. 84. 00 above but for with copper conductor cable for one 3 pin socket outlet, 15 amp on independent board, with cable 2.5 sqmm size complete all as specified and directed. |
| 88 | M&L Modular switch 1 way 6A, 1 module, complete all as specified and directed. |
| 89 | S&F Socket, 6A - 2/3 pin combined 2 module complete all as specified and directed. |
| 90 | M&L Modular switch 1 way 16A, 1 module complete all as specified and directed. |
| 91 | M&L Socket 6A/16A - 2/3 pin combined 2 module,complete all as specified and directed. |
| 92 | S & Fix ceiling rose surface backlite 65x50mm 3 terminals complete. |
| 93 | S&F White cover plate with frame, 3 module complete all as specified and directed. |
| 94 | S&F White cover plate with frame, 6 module complete all as specified and directed. |
| 95 | S&F White cover plate with frame, 8 module complete all as specified and directed. |
| 96 | S&F Metal flush box 3 module complete all as specified and directed. |
| 97 | S&F Metal flush box 6 module complete all as specified and directed. |
| 98 | S&F Metal flush box 8 module complete all as specified and directed. |
| 99 | M&L Rigid non-metallic PVC conduit of Dia 25mm exclusive of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc complete all as specified and directed by Engr-in charge. |
| 100 | Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc complete all as specified and directed by Engr-in charge. |
| 101 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with Louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm complete all as specified and directed. |
| 102 | Supply and fixing in repair LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light(White and yellow warm light) complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed by Engr-in charge. |
| 103 | Supply and fixing in repair LED lights fitting (4 feet)1x 18W, 220V, AC decorative box type with driver, holder including LED tube light( white and yellow warm light) connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engr-in charge. |
| 104 | Supply and fixing in repair LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including Connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engr-in charge. |
| 105 | Supply and fixing LED Light fitting muzrisis picture light 12 watt 220V AC decorative type with and LED lamp including connection up with three core flexible copper conductor cable of suitable size complete. |
| 106 | Supply and fix Polycarbonate LED COB Spotlight, compact display light with 1 inch cutout, warm white fitted in ceiling all as directed by engr in charge. |
| 107 | Supply and fix 9 watt white LED Track light/ Spotlight/focus light with rotable head all as directed by engr in charge. |
| 108 | Supply & fix sheet metal enclosure MCB distribution board. Single pole & neutral 230 Volts 8 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification all as directed by engr in charge. |
| 109 | Taking down old serviceable MCB distribution box any type and size from the wall by breaking plaster, keeping it in safe custody and fixing it at new/same position dully fixed on wall with all the fixing arrangement all as required at site and making connection with existing electrical circuit all as directed by engr in charge. |
| 110 | Supply and fix in replacement MCB single pole 230 Volts any rating from 6 to 32 amps, with rupturing capacity 10 KA,including providing thimble for out going cables all as directed by engr in charge. |
| 111 | Supply and in replacement MCB SPN 230 Volts any rating from 32 to 40 amps, with rupturing capacity 10 KA, including providing thimble for out going cables all as directed by engr in charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysJul 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender