Tender For Comprehensive Repair In Jcos/Or Md Accn Under Ge (N) Akhnoor
Tender Value
35 Lakhs
Estimated cost
Bid Submission
21 Jul 2026
8 days left
EMD
70000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
akhnoor → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Comprehensive Repair In Jcos/Or Md Accn Under Ge (N) Akhnoor
BOQ
| Sl. No. | Item Description |
| 1 | Taking up or down steel tubing and connections, 15 mm bore fixed on walls, floors or ceiling etc complete all as specified and as directed. |
| 2 | -Ditto - all as per item No.1 here-in-before but 20mm bore. |
| 3 | S&F 15mm bore tubes, medium grade, galvanised with and including all fittings fixed to walls, floors, or ceiling or laid in floors etc complete all as specified and as directed |
| 4 | -Ditto- all as per item No3 here in before but 20mm bore. |
| 5 | Supplying and laying of 16mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 6 | Supplying and laying of 20mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 7 | Refixing old steel tubing and connections in new or old position on walls, ceiling or floors etc of size 15 mm bore after cleaning including provn of new fittings all as directed. |
| 8 | -Ditto- all as per item No.7 here- in- before but 20 mm bore. |
| 9 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish off premises complete all as specified and as directed. |
| 10 | 25 mm thick PCC 1:2:4 type B-0, using 12.5mm graded crushed stone aggregate, including finishing surface of concrete topping even and rough as in levelling cousre, complete all as specified. |
| 11 | Non skid coloured ceramic tiles 7 to 8 mm thick(square / rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shed of tiles over and including 15mm thick screed bed in CM (1:6), complete all as specified and directed. |
| 12 | -Ditto- all as per item No 11 but in skirting over and including 10mm thick rendering in CM 1:4 |
| 13 | Glazed ceramic tiles 450 x 300 x 7mm thick / 350 x 250 x 7mm thick (coloured) on vertical surfaces such as skirtings, dados etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 10 mm thick plaster in CM 1:4 complete all as specified and directed. |
| 14 | Vitrified ceramic tiles (Light shade) 10mm thick (square /rectangular) polished, area of each tile n.exceeding 0.36 sqm laid as in floors, set and jointed in neat cement slurry and pointed in white/coloured cement to match with shade of tiles including 15mm thick screed bed in cement and sand mortar 1:6 complete all as specified and directed. |
| 15 | -Ditto- all as per item No 14 but in skirting over and including 10mm thick rendering in CM 1:4 |
| 16 | Sand cushion in flooring below interlocking tiles (laid layers 25mm thick) complete all as specified and directed. |
| 17 | Machine pressed concrete interlocking paver block any shape, size and colour confirming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment over sand cushion complete all as specified and directed.Note:- Sand cushioning shall be measured & paid seperately. |
| 18 | PCC 1:2:4 type B-0 (Using 12.5 mm graded crushed stone aggregate) as in copings, and edges of path ,roof kerb ete including weathering, slightly rounded or chamfered angles and throating etc completed all as specified and directed. |
| 19 | Taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water etc all as specified and as directed. |
| 20 | Rendering 10mm thick in cement mortar (1:6) on fair faces of the brick work or cement concrete surfaces, finishing the surface even and smooth without using extra cement, complete all as specified and as directed. |
| 21 | Rendering 15mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces, finishing fair and even without using extra cement, complete all as specified and directed. |
| 22 | Rendering 5mm thick cement plaster with cement and sand mortar(1:3) on concrete surface as in ceiling finished even and smooth without using extra cement all as specified and directed. |
| 23 | Demolition of brickwork or stone boulder masonary built in cement mortar including all quoins, arches, pillars etc complete all as specified and as directed. |
| 24 | Brickwork with sub class ‘B’ (old size) bricks, straight or curved on plan exceeding 6 metre mean radius built in cement sand mortar 1:6 complete all as specified and as directed. |
| 25 | -ditto-all as per Srl item No. 24 here-in-before, but execept bricks. |
| 26 | Brick work with sub class B brick straight or curved on plan to any radius in half brick thick built in CM 1:4 complete all as specified and directed. |
| 27 | Taking down of existing old tarfelt, water proofing membrane including roof tiles, cement mortar screed, concrete base of any thickness and roughing surfaces to receice roof treatement including removal of debris from MoD land, complete all as specified and as directed. |
| 28 | Rendering 15mm thick on roof surfaces incl parepet etc in CM 1:3 finished even and smooth using extra cement and mixed with water compound as per manufactures instructions etc complete all as specified and directed.(Note WPC shall be measured and paid seperatly) |
| 29 | Supply only liquid water proofing admixture conforming to IS 2645-1975 of approved make complete all as specified and directed.(Dosage- @ 200ml per 50Kgs of Bags of cement) |
| 30 | Water proofing treatment to RCC roof slab including parapet as under :- (a) Ist Course : Apply a coat of bituminous primer conforming to IS-3384@ 0.40 Kg /Sqm on prepared surface of plaster and after drying of primer, apply a coat of hot blown 85/25 grade bitumen conforming to IS-702 @ 1.2 Kg/sqm on plastered surfaces. (b) 2nd Course : APP (Atactic Polypropylene) modified polymeric membrane, 5 layered, 3 mm thick weight not less than 3.0 Kg/Sqm with 160 Grams/Sqm non woven polyester made at centre core reinforced laid with 75 mm side overlap and 150 mm end overlap, membrane has to be laid with LPG torch and overlap sealed and finished neat, all joints and changes in direction should be covered with cement mortar 1:3 mixed with SBR latex @200ml/bag of cement and curved before laying of membarance.(c) 3rd Course : Apply a coat of hot blown 85/25 grade bitumen conforming to IS-702 @ 1.2 Kg/sqm over membrance and dusted with dry sand @ 0.50 to 1 Kg/sqm. Note:-(i) The water proofing treatment shall be got carried out from the authorised personal of the Company all as specified and directed. |
| 31 | Preparation of newly plastered surfaces of walls and applying three coats of white wash complete all as specified and directed. |
| 32 | Preparation of newly plastered surfaces of ceiling and applying three coat of white wash, complete all as specified and directed. |
| 33 | Preparation of newly plastered surfaces of wall and applying two coats of cement base paint complete all as specified and directed. |
| 34 | Preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of chalk whitening primer complete all as specified and as directed. |
| 35 | Preparation of old painted surfaces by washing, rubbing down and stopping of distempered and painted walls and applying one coats of oil bound distemper complete all as specified and as directed. |
| 36 | Preparation of old painted surfaces by washing, rubbing down and stopping of plastered surfaces and applying one coats of cement base paint white or tined on wall complete all as specified and as directed. |
| 37 | Material & Labour for preparation of plastered or un plastered on old surfaces of walls and applying 3mm thick external all care putty over two or more coats of 100% Premium acrylic exterior emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489 : 2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (company Depot Tinted) with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @0.90 litre/10 Sqm complete with min 5 years warranty of the paint complete all as specified and directed. |
| 38 | Preparation of new plastered/ untreated surface of wall and applying two coats of plastic emulsion paint over one coat of primer white or tinted over a coat of 2mm thick wall care putty complete all as specified and directed. |
| 39 | Preparation of existing treatment of old surface of wall and applying two coat of white wash complete all as specified and directed. |
| 40 | Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15 cm thickness (below or above ground level ) complete all as specified and as directed. |
| 41 | 40mm thick PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in flooring including finishing the top surface even & smooth, using extra cement complete all as specified and directed. |
| 42 | 50mm thick PCC (1:3:6) type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection laid in bays complete including finishing the surface of concrete topping even & fair, without using extra cement complete all as specified and directed. |
| 43 | 75mm thick PCC (1:3:6) type C-1 (using 20mm graded crushed stone aggregate) as in PCC path complete including finishing the surface of concrete topping even & fair, without using extra cement complete all as specified and as directed. |
| 44 | Vitreous china squatting pan \\"Orissa Pattern\\" size 580 x 440 mm in white with integral foot rest (excluding flushing cistern and flush pipe) with CI 'P' trap of long arm of suitable size including connection to flush pipe, antu symphonic pipes etc, complete all as specified and directed. |
| 45 | Vitreous china wash down water closet pan pedestal pattern white(excluding flushing cistern and pipe) complete all as specified and directed. |
| 46 | Plastic water closet seat cover white closed pattern with flat bottom and cover including chromium plated hinges device complete all as specified and directed. |
| 47 | PVC low level flushing cistern, valveless, syphonic action type, 10 litres capacity with inlet, ball valve float and handle with and including brackets & PVC bend pipe 90 cm long etc complete all as specified and as directed. |
| 48 | Vitreous china Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe), with grating and union for discharge pipe specified and directed. |
| 49 | PVC Waste pipe 32/40mm bore of required length complete for WHN, sink/Urinal pipe including supplying and fixing. |
| 50 | Vitreous china wash basin, white, flat back, size 550x400mm including waste fitting chromium plated brass, chromium plated steel chain and rubber plug, porcelain stopper, a pair of CI brackets and waste pipe etccomplete all as specified and directed. |
| 51 | 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick commercial quality ply-wood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. |
| 52 | Bath cabinet of size 360mmx450mmx90mm deep with glass of size 320mmx450mmx3mm thick (Make :Prayd (Symet) |
| 53 | PVC connection 15mm size, of length 450mm with PTMT nuts complete all as specified and as directed. |
| 54 | Stop valves cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions, for bore dia of pipe 15mm fixed in repairs, complete, all as specified & directed. |
| 55 | Bib taps 15mm dia, fancy type chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe for brass ferrule, for bore dia of pipe 15mm fixed in repairs, complete all as specified and as directed . |
| 56 | Pillar tap of 15mm bore dia fancy type capstan heads, chromium plated screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe and fixed in repairs complete all as specified and directed. |
| 57 | Health faucet with one mtr long flexible tube and wall hook chromium plated screwed down for iron pipe fixed in repairs, complete all as specified and as directed. |
| 58 | Brass chromium plated fancy type wall mixture for mixing of hot and cold water supply screwed down including connecting leg & wall flange for iron pipe 15 mm bore fixed in repair complete all as specified and as directed. |
| 59 | Ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe 20 mm dia (minimum weight 210 gms) complete all as specified. |
| 60 | Stainless steel sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm fixed in repairs, complete all as specified. |
| 61 | Plate rack made of stainless steel 0.80mm thick overall size 786mm x 610mm x 254mm complete all as specified and directed. |
| 62 | 20mm bore gun metal glove or gate valve with iron wheel head screwed bith end for iron pipe and fixed in repairs, complete all as specified and as directed. |
| 63 | Brass Chromium plated shower roses 125 mm size with or without swivel joints, including fixing to steel pipe or complete all as specified and as directed. |
| 64 | Syphonic kit for all type of flushing cistern including supoply and fixing in repairs |
| 65 | Brass Tap phase for bib taps/mixture including supply and fixing in repairs |
| 66 | Rotational moulded polyethylene water storage tanks of 1000 Litres capacity, (cylindrical vertical tanks with closed top) 3 layered hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc including taking down existing tank complete all as specified and as directed. |
| 67 | Rotational moulded polyethylene water storage tanks of 500 Litres capacity, (cylindrical vertical tanks with closed top) 3 layered hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc including taking down existing tank complete all as specified and as directed. |
| 68 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size n. exc 1.5 Sqm each and removing from site complete all as specified. |
| 69 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size n. exc 1.5 Sqm each but not exc 4.0 sqm each and removing from site complete all as specified directed. |
| 70 | Taking down shutter of any description area exc 1 sqm but not exc 2.0 sqm each complete all as specified and directed. |
| 71 | Taking down and refixing incl resecuring and easing shutters area exceeding 1.00 sqm and n.exc 2.00 Sqm each in the same opening complete all as specified and as directed . |
| 72 | Pressed steel frame for doors of size 105 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including one shop coat of priming complete all as specified and directed. |
| 73 | Pressed steel frame for doors of size 125 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including one shop coat of priming complete all as specified and directed. |
| 74 | Steel windows/ventilator (Box type) factory made glass/glazed shutter with frame , (glass panes shall be measured and paid separately) including box type hinges with steel handle 100 mm long and steel peg stay dovetailed or welded incl 2 Nos tower bolts 150mm long and 8mm square bar grills complete all as specified & as shown on drg No. CEUZ/TD/1302/2009 Sheet No 1/1 to 1/3 . |
| 75 | Ditto all as per item No 64 here-in-before but without grill and glazing bar complete all as specified and as directed. |
| 76 | Aluminium powder coated sliding window, chowkat of size 63mm x 40mm x1.3 mm thick with aluminium powder coated two track frame of size 63mm x 32mm x 1.3mm thick with 2 Nos sliding shutter of powder coated aluminium section (top rail, bottom rail and style of size 40mm x 18mm x 1.3mm thickscrewed to wall/floor including provn of 4mm thick tinted sheet glass fited in panel including necessary locking device , joining cleats, glazing clips, rubber neoprene packing, aluminium beading and srewed including fixing of stainless steel wire cloth 0.36mm nominal dia of wire and width or aperture 1.4 mm to aluminium frame with and including aluminium grill fitted with aluminium flat of size 40mm x 3mm complete all as sopecifeed and as directed. |
| 77 | Hacking out old broken glass (any thickness, size, quality or description) from metal frames/Aluminium frames including punching or drilling out old glazing pins/spring clips complete all as specified and as directed. |
| 78 | 3mm thick sheet glass ordinary quality and glazing with oil putty or fixed with bead/glazing pins in squares n.exc 0.5 Sqm in each pane including hacking out old glass panes all as specified. |
| 79 | 3mm thick sheet glass ordinary quality and glazing with oil putty or fixed with bead/glazing pins in squares n.exc 0.5 Sqm in each pane including hacking out old glass panes all as specified. |
| 80 | 4 mm thick tinted sheet glass, selected quality and glazing with aluminium beads and rubber packing in square not exceeding 0.5 square metre in each pane complete all as specified and as directed. |
| 81 | Galvanized mild steel wire-cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed. |
| 82 | Repair Galvanized mild steel wire-cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed. |
| 83 | Preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of anti corrosive synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified and directed. |
| 84 | Painting to new wood or wood based surfaces of any description not otherwise described over 10 cm in width or girth including preparation of surfaces, priming with pink primer (one coat) finished with two coats of synthetic enamel paint complete all as specified and directed. |
| 85 | Preparation of old steel surfaces of any description, exc 10 Cm in width or girth, including preparation of surfaces, priming with pink primer (one coat) finished with two coats of synthetic enamel paint complete all as specified and directed. |
| 86 | Preparation of old wood or wood based surfaces of any description not otherwise described over 10 cm in width or girth, and appying one coat of synthetic enamel paint complete all as specified and as directed |
| 87 | PCC 1:2:4 type C-0 using (12.5 mm graded stone aggregate) as in filling of pressed steel frame complete all as specified and as directed |
| 88 | PCC 1:3:6 type C-1 using (20mm graded stone aggregate) for hold fast blocks, including necessary form work for rough finished surfaces etc complete all as specified and as directed |
| 89 | 35mm thick, IInd class hard wood plain, framed, panelled factory made shutters (two panel) with lock rail and panel of 12mm veneered particle board with commercial veneering on both faces. The size of rails and styles as per IS-1003 (Part-I) kiln seasoned and chemically pressure treated complete all as specified & as directed. |
| 90 | 35 mm thick, 2nd class soft wood , glazed & skeleton factory made shutters, open rebated & prepared to receive glass, gauze etc. (without sash-bars), edges of framing plain, chamfered or rounded fitted with cut and metred beads for securing glass etc., sizes of members of shutters as specified in SSR Part-I, Section-8, clause 8.20(a) complete all as specified and as directed. |
| 91 | 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and as directed. |
| 92 | Solid PVC Door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S square tube, supplying and fixing in opening as per specification and drawing, complete all as specified and directed. |
| 93 | Factory made solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles & rails with suitable PVC sheet beading and jointed together with solvent cement supply & fixing in the frame at site, complete all as specified and as directed. |
| 94 | 100 mm butt hinges, medium weight cold rolled mild steel, complete all as specified. |
| 95 | 250mm long aluminium alloy anodised sliding door bolt with hasp staple, bolt type, and fixing clips of sheet, cast or extruded sections & fixing bolts and sliding bolts of extruded section or cast aluminium alloy, ISI marked complete all as specified. |
| 96 | 150mm long, aluminium anodised, barrel tower bolts, of extruded section ISI marked complete all as specified and as directed. |
| 97 | Aluminium handle cast type anodised of size 150mm long ISI marked complete all as speicified directed. |
| 98 | Door closer of aluminium (Die cast body), hydraulically regulated, designation No 3, universal type, suitable for door shutters of size 851mm to 1000mm of width , ISI marked fixed in repairs, complete all as specified and as directed. |
| 99 | Aluminium mortic lock (4 levers) 100 mm long vertical type fixed in repairs, complete all as specified and as directed. |
| 100 | 300 mm size mild steel ordinary rat tail rod pattern springs including roller and roller plate, ISI marked, fixed in repairs complete all as specified and as directed. |
| 101 | 25 mm dia aluminum anodised curtain rod complete with bracket and side caprs fixed in position by drilling holes in wall and fixed the bracket with rawl plug and SS screw all as specified and as directed |
| 102 | Taking down eaves gutters and rain water pipe , soil and waste pipe PVC or CI (any size or pattern ), includding all fittings, heads , shoes bends , swan-necks etc all as specified and directed. |
| 103 | 110 mm dia PVC (SWR) pipe single socketed in any length with rubber ring joint laid intrenches or in floor all as specified and directed |
| 104 | 110 mm dia PVC (SWR) pipe single socketed in any length with rubber ring joint laid intrenches or in floor all as specified and directed. |
| 105 | 75 mm dia PVC (SWR) pipe single socketed in any length with rubber ring joint laid intrenches or in floor all as specified and directed. |
| 106 | 75mm bore PVC SWR Type-B pipes single socket in any length with rubber joint fixed to wall with PVC//MS holder clamp etc complete all as specified and as directed |
| 107 | PVC SWR reducer 110mm to 75 mm complete all as specified and as directed. |
| 108 | PVC SWR vent cowl 75 mm complete all as specified and as directed. |
| 109 | PVC (SWR) bend 110 mm dia any radius all as specified and directed. |
| 110 | PVC (SWR) junction single (single T) equal or unequal with access door 110 mm dia all as specified and directed. |
| 111 | PVC (SWR) bend 75 mm dia any radius all as specified and directed. |
| 112 | PVC (SWR) 75 mm dia floor trap plain with grating including jointing with solvent cement all as specified and directed |
| 113 | PVC (SWR) junction single (single T) equal or unequal 75 mm dia all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysJul 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender