Tender For 8669 - Provision Of Minor Works At Nstl Under Age (I) R & D, Nstl, Visakhapatnam
Tender Value
4.49 Lakhs
Estimated cost
Bid Submission
20 Jul 2026
18 days left
EMD
9000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Visakhapatanam → Andhra Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For 8669 - Provision Of Minor Works At Nstl Under Age (I) R & D, Nstl, Visakhapatnam
BOQ
| Sl. No. | Item Description |
| 1 | Taking down Chowkats or frame not exc 1.5Sqm each with shutters (without taking off shutters from the frames), all as specified. |
| 2 | Taking down shutters of any description exc. 1Sqm and not exc. 2Sqm each, complete all as specified and directed. |
| 3 | M&L plain framed panelled shutter 35mm thick (any number of panels) with panels of timber flat or both sides or of veneered particle board mediam density wood particle board with commercial face veneerd supplied and fitted to chowkats |
| 4 | S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube complete all as specified inSSR Part-II section -8 and directed by Engineer -In-Charge.(Make-Sintex/Rajshree wood plastic limited/Nandi/National) |
| 5 | S & F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail and bottom rail panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, & S & F in the frame at site as per specification and as directed by Engineer-in-Charge. (Make-Sintex/Rajshree wood plastic limited/Nandi/National) |
| 6 | S&F MS butt hinge cold rolled medium weight 100mm size |
| 7 | S&F anodised aluminium barrel tower bolt 100mm long. |
| 8 | S&F 'D' type handle aluminium anodized 125mm in size. |
| 9 | S&F Aluminium Sliding Bolt of Size 200mm |
| 10 | M&L for preparation of old decorated surfaces of ceilings by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc. and applying one coat of white wash complete all as specified and as directed. |
| 11 | M&L for complete removal of existing treatment on walls and applying two coats of oil bound distemper over a primer and necessary preparation of surfaces all as specified and directed. |
| 12 | M&L for preparation of old painted steel and iron surfaces of any description not other wise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 13 | M&L for preparation of old painted wood and wood based surfaces of any description not other wise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 14 | M&L Two coat of synthetic enamel paint over a one coat of pink primer including preparation of new or previously untreated wooden or wood base surface of any description, not otherwise described over 10cm with or girth, complete all as specified and directed by Engineer-in-charge. |
| 15 | S&F in Repairs Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed |
| 16 | Taking down cement plaster on brick work or stone walls or concrete surfaces etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed. |
| 17 | M&L for rendering 15mm thick in CM (1:6) on concrete/ brick masonry surfaces, finished even and smooth without using extra cement complete all as specified and as directed. |
| 18 | M&L for preparing new plastered surfaces of walls Chalk whiting, on plastered surface and applying two coats of oil bound distember. |
| 19 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises complete all as directed. |
| 20 | M&L Providing and fixing factory made uPVC white colour casement (Openable) window made of extruded profiles with wall thickness of 2.3mm ( + – 0.2mm). Window profile with hollow section with multi chamber, frame (60mm x 58mm), sash (60mm x 73mm), T profile (One vertical length in between two shutters) (60mm x 74mm), Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 +– 0.2mm thick, galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27.5mm). T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100mm long fasteners. Hardware: [casement handle made of zinc alloyed (white powder coated), But Hinges of'zinc alloyed (white powder coated), transmission gear made of mild steel with multi point locking system] and 5mm thick glazing with selected quality glass. |
| 21 | M&L for glazed ceramic digitally printed tiles of size 300x450mm, 7mm thick in vertical surfaces of wall, set and jointed in neat cement slurry and pointed in coloured cement to match laid over and including 10mm thick backing coat in CM 1:3 complete all as specified. |
| 22 | M&L Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid and including 15mm thick screed bed in CM (1:4) complete all as specified. |
| 23 | M&L for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and as directed. |
| 24 | S&F in repairs vitreous China squatting pan, Orissa pattern, size 580x440mm, white with integral foot rests, 'P' or 'S' trap including provision of lime concrete bedding including connections to flushing cistern/pipe and making good disturbed portion to match complete all as directed. |
| 25 | S&F in repairs PVC valve less, syphonic action type, flushing cistern, 10 litres capacity, low level, white, with inlet, ball valve, float and handle, brackets complete including PVC connection and outlet pipe all as directed.[Make: 'Slim line' of M/s Parry ware/ 'Champion' of M/s Hindustan Sanitary ware/ 'Sleek+' of M/s Hindware] |
| 26 | S&F in repair vitreous china white flat back wash hand basin 550 x 440mm size including 15mm dia PVC connection 600mm long, brass CP waste coupling, 32mm dia PVC waste pipe, CI/MS brackets including cutting for and pinning in brackets or fixed with brass screws all as directed. |
| 27 | S&F 15mm Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed in repairs all as specified. (Minimum weight 90gms) |
| 28 | S&F 15mm Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed in repairs all as specified. (Minimum weight 110gms) |
| 29 | S&F 15mm angle valve any colour high pressure screwed for iron pipe and fixed in repairs all as specified. (Minimum weight 110gms) |
| 30 | Taking up or down galvanized steel tubing 15mm bore with fittings. |
| 31 | S&F GI tubes 15mm bore dia medium grade galvanized, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed. |
| 32 | Excavating in trenches n exc 1.5m wide and not exc 1.5m in depth for foundation and getting out in hard/dense soil |
| 33 | M&L cement concrete type D-2,1:4:8 (40mm graded stone aggt) as in filling and mass concrete as in sub floors complete all as specified and as directed |
| 34 | M&L brick work with sub class 'B' modular size bricks straight or curved on plan exc 6 m mean radius in cement mortar 1:6 |
| 35 | M&L for 15mm thick cement plaster in CM 1:4 on bricks on concrete surfaces finishing the surfaces even and smooth without using extra cement including taking down existing plaster new surface all as specified. |
| 36 | M&L for preparation of new plastered surfaces of walls and applying two coats of weather proof exterior emulsion over a coat of exterior primer complete all as specified. |
| 37 | Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm in hard/dense soil |
| 38 | Removing excavated material n exc 50m and depositing complete all as spd. |
| 39 | M & L RCC type B-1 , 1:2:4 (Design Mix M-25 ) (20 mm graded aggregete) as in slab supported on walls ,roof beams complete all as specified |
| 40 | M & L for mild steel TMT bars 10mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with MS wire (annealed) not less than 0.9mm dia for securing with clips complete all as specified and directed. |
| 41 | -Ditto- but 5mm dia and over upto and incl 10mm dia in stirrups spacers and binders. |
| 42 | Form work to soffits of suspended slab such as roof slab, floor slabs landing and similar work; n.exc 200 mm thick |
| 43 | M & L RCC (Nominal Mix) type B1 1:2:4 (20 mm graded aggregete) as in lintel band complete all as specified |
| 44 | Formwork to edges of concrete flats, breaks in floor, openings in concrete walls, floors and roofs n.exc 20 cm width for rough finished surfaces. |
| 45 | Supply and fix 15 mm bore medium grade galvanised steel tubing with all fitting laid in trench complete all as specified. |
| 46 | Supply and fix 20 mm bore medium grade galvanised steel tubing with all fitting laid in trench complete all as specified. |
| 47 | Supply and fix Fancy type 15mm bore Bib Taps, cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule |
| 48 | Supply and fix 20 mm bore Gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe. |
| 49 | Supply & Fixed rotational moulded polyethiene water storage tanks of capacity 2000 litres, (cylindrical vertical with closed top) hoisted and fixed in position including S & F necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer ,brass valve 20mm high pressure with polythene float and fly nut etc complete including dismantling existing water tank all as specified and directed. |
| 50 | M &L Surface dressing n exc 15 cm deep in soft/Loose soil |
| 51 | Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering |
| 52 | M & L Hardcore using broken stone boulders not exceeding 63mm deposited spread and levelled in layers not exceeding 15 cm thick watered and rammed to a true surfaces |
| 53 | M&L 75mm thick cement concrete type D2 1:4:8 (40mm graded stone aggt) as in sub base |
| 54 | Supply and laying 60mm thick Machine Pressed Precast Concrete M-35 Grade, Interlocking Paver Blocks, PVC mould reflective type conforming to IS - 15658 of any shape and size with Grey cement and pigment complete laid all as specified and as directed. |
| 55 | M & L Kirloskar Jalraaj 1 HP Single Phase self priming pumpset all as specified and as directed |
| 56 | S&F GI Tubing medium grade 25mm dia bore with all fittings such as bends, sockets, elbows, tees, reducers, unions, sockets complete laid in trenchs/ floors or fixed to wall complete all as specified. |
| 57 | S&F new gun metal gate valve of 25mm dia bore (Class-I, 1.5 Mpa) with ISI mark and iron wheel head, screwed both ends to GI pipes. |
| 58 | All as per Item No.57 herein before but for 20mm bore dia |
| 59 | Laying of one nubmer PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of 10x2 size direct in ground inlcuding excavation, sand cushioning, protective covering and refilling the trench etc as required. |
| 60 | Supply, installation, testing and commissioning in replacement of motor 1 phase DOL starter cap 2 HP, 220 volts, complete all as specified and directed by Eng-in-Charge Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysJul 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 days