Tender For Addition/Alteration Of Shed And Tiles Of Bldg No P-1 Under Ge (South) Ambala Cantt.
Tender Value
3.60 Lakhs
Estimated cost
Bid Submission
21 Jul 2026
11 days left
EMD
7210
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ambala → Haryana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Addition/Alteration Of Shed And Tiles Of Bldg No P-1 Under Ge (South) Ambala Cantt.
BOQ
| Sl. No. | Item Description |
| 1 | Surface dressing n exc 15 cm deep and getting out of soft/loose soil complete all as specified and as directed by Engineer-in-Charge. |
| 2 | Excavating in post holes (or similar holes ) each n exc 0.5 cu.m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50m and making good surface in soft/loose soill, complete all as specified and as directed by Engineer-in-Charge. |
| 3 | Material and labour for plain cement concrete 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed by Engineer-in-Charge. |
| 4 | Supply and fixing steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming tofe -410W (gde E-250) quality, complete all as specified and as directed by Engineer-in-Charge. |
| 5 | Material and labour Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick, of an colour, having tensil strength of 550 Mpa as in roof /cladding fixes with self tapping screws, complete all as specified and as directed by Engineer-in-Charge. |
| 6 | Material and labour for preparation of surfaces of new iron and steel surfaces of and two coat of synthetic enamel paint (ordinary tint) over a coat of red oxide primer, complete all as specified and as directed by Engineer-in-Charge. |
| 7 | Supply and fixing PVC half round eaves gutter 180 mm dia in any length with rubber ring joints fixed to walls, complete all as specified and as directed by Engineer-in-Charge. |
| 8 | Supply and fixing 180 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls (Jointing to be done with solvent cement) including PVC brackets, complete all as specified and as directed by Engineer-in-Charge. |
| 9 | Supply and fixing 180mm bore PVC (SWR) Bends any radius, complete all as specified and as directed by Engineer-in-Charge. |
| 10 | Supply and fixing mild steel work as in plain angle plate for securing Bands, straps, supports or stays for rainwater, cleats for securing purlins trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similarsmall articles conforming to Fe-290 Gde-E-165, complete all as specified and as directed by Engineer-in-Charge. |
| 11 | Material and labour for Hard core of broken boulders of guage not exc 63 mm deposited spread & levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface, complete all as specified and as directed by Engineer-in-Charge. |
| 12 | Material and labour for 100mm thick PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in floors as sub base, complete all as specified and as directed by Engineer-in-Charge. |
| 13 | Material and labour for 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as specified and as directed by Engineer-in-Charge. |
| 14 | Material and labour for of 300x300 mm & 8mm thick outdoor tile in approved color & shade and in anti skid finish set and jointed in neat cement slurry and pointed in white cement & pigment to match over and including 20 mm thick screed bed in cement mortar 1:4 complete all as specified and directed by Engineer- in - Charge.(Note: Design/pattern shall be as approved by GE at the time of execution) |
| 15 | NOTE:- Amount of credit of Rs. 0.00 for retrieved materials is mentioned in Schedule of Credit Page No 19.00 of tender documents in pdf form which will be deducted offline while acceptance of tender. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysJul 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender