Tender For Providing Of Certain Minor Works Under Ge(Af) Thoise
Tender Value
19.40 Lakhs
Estimated cost
Bid Submission
20 Jul 2026
8 days left
EMD
38800
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
LADAKH → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Providing Of Certain Minor Works Under Ge(Af) Thoise
BOQ
| Sl. No. | Item Description |
| 1 | Supply and fixing of UV-stabilized HDPE Bird Netting of mesh size 25 mm and minimum thickness 1.2 mm, having breaking strength of 23–25 kgf per strand, complete with stainless steel hooks, fasteners, nylon ropes, access zippers and all other accessories required for proper installation. The work shall include fixing at all heights, complete in all respects as directed by the Engineer-in-Charge.\\" |
| 2 | Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in hard/ dense soil, complete all as specified. |
| 3 | M&L Plain Cement Concrete (PCC) type D-2, 1:4:8 (with 40 mm graded crushed stone aggregate) in foundation, filling and mass concrete, complete all as specified and directed. |
| 4 | M&L Precast cement concrete 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) as in block masonry with solid blocks, etc 10 cm in width and setting in cement mortar 1:6, complete all as specified and directed. |
| 5 | M&L Rendering 15 mm thick in cement mortar 1:4 on fair faces of block masonry or concrete surface, finished even and smooth without extra cement, complete all as specified and directed. |
| 6 | M&L Rendering 10mm thick in CM (1:6) on brick masonry/ precast cement concrete block masonry internal surfaces of walls finished even and smooth without using extra cement complete all as specified and directed by Engr in Charge. |
| 7 | M&L Two coats of white wash on newly plastered wall surface after preparation of surface, complete all as specified and directed. |
| 8 | M&L Rolled mild steel work in joist, channel, angle or tee sections, fixed independently without connecting plates etc. (cut to ordinary lengths within 20 mm of required length) conforming to Fe-410W, complete as specified. |
| 9 | M&L TMT bars 10 mm dia and over, cut to length, bent to shape including cranking, bending spirally for columns, hooking ends and binding with annealed wire (not less than 0.9 mm dia), complete as directed |
| 10 | All as per ser item No. 9.0 above but 5mm dia and over upto and including 10mm dia as in stirrups spacer and binders complete all as specified and directed. |
| 11 | M&L 1.25 mm thick MS plain black sheet in steel gate and similar work, cut to size, holes punched, including riviting, welded seam and bending etc complete. |
| 12 | M&L Two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new surface of any description over 10 cm width or girth, complete as specified and directed. |
| 13 | Excavating in trenches in hard dense soil n.exc 1.5M wide and n.exc 1.5M in depth for foundation, laying pipes, cables etc n.exc 10Sqm on plan and n.exc 1.5M in depth and getting out in hard/dense soil concrete all as specified and directed. |
| 14 | Returning, filling including spreading, watering and well ramming in layers not exc 25 CM in foft/loose and hard/dense soil all as specified and as directed. |
| 15 | Removal of excavated soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above starting point, complete as specified and directed. |
| 16 | All as per ser item No 15.00 above but to a distance exc 250 mtr but not exc 500 mtr directed all as specified and as directed. |
| 17 | Excavating in post holes (or similar holes) each n exc 0.5 cum, including getting out, returning, filling and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete as specified and directed. |
| 18 | M&L Mild steel works as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc and flat iron fillets for securing wire mesh similar work Confirming to Fe-290 (Gde E-165) etc, Complete all as specified and as directed by Engr-in-Charge. |
| 19 | M&L MS flat iron supports or stays for fixing chain link fencing, including nut, bolts, washers etc conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 20 | M&L Mild steel screw bolts (machine made) diameter of neck 11 to 15 mm with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 05 cm and n exc 10 cm long, Complete all as specified and as directed by Engr-in-Charge. |
| 21 | M&L MS Round bars 8 mm dia and over cut to length bent to shape required and all as specified conforming to gde Fe 410-W (Gde.E-250) quality-A or Fe 290 (Gde-E-165)for securing chain link fencing, Complete all as specified and as directed by Engr-in-Charge. |
| 22 | Supply only chain link feincing MS galvanisd fencing, of size (75mm x 75mm) and dia of wire is 4mm complete all as specified. |
| 23 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified. |
| 24 | M&L RCC Nominal mix type B-1 1:2:4 (12.5 mm graded crushed stone agg) as in foundation, including raft, footing foundation beams, plinth beams bases for columns, etc basement slab, under ramed piles and mass concrete all as specified and directed. |
| 25 | M&L RCC Nominal mix type B-1 1:2:4 (12.5 mm graded crushed stone agg) as in Beams, cantilevers, bressummers,lintels over 1.5m span all as specified and directed. |
| 26 | M&L RCC Nominal mix type B-1 1:2:4 (12.5 mm graded crushed stone agg) as in Columns, pillars, piers, posts all as specified and directed. |
| 27 | Form work to sides of concrete foundations, footings, bases of columns, sides and soffits of foundation and plinth beams and similar work vertical or batter all as specified and directed. |
| 28 | Form work to sides of pillars, posts and columns all as specified and directed. |
| 29 | M&L Three coats of white wash on new plastered surfaces on wall including preparation of new plastered surfaces all as specified and as directed . |
| 30 | M&L Two coats of Cement Base Paint over a coat of alkali resistant primer on newly plastered surfaces of walls (camouflage pattern) including preperation of new surfaces complete all as specified and as directed. |
| 31 | S&F 0.63 mm thick Galvanised, corrugated mild steel shetting with two corrugations side lap, fixed with coach screws, washers, and L-type or J-type or cranked hook bolts in lieu of screw in roofs, walls etc. With grade of zinc coating 275 etc complete all as specified and as directed. |
| 32 | S&F 0.63 mm thick plain Galvanised, mild steel shetting in ridges, hips, vally gutters, drip, straight flashing & fixed with coach screws, washers, and L-type or J-type or cranked hook bolts in lieu of screw in roofs, walls etc. (length and girth as fixed) with grade of zinc coating 275 etc complete all as specified and as directed. |
| 33 | M&L Peparation of new steel surfaces applying two coat synthetic enamel paint over a coat of red oxide (camouflage pattern) etc all as specified and directed by Engr-in-Charge. |
| 34 | M&L Roof trusses (framed), trussed purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conferming to Fe 410W (gde -E-250) quality A all as specified and as directed. |
| 35 | M&L Synthetic enamel paint two coats on over 10cm width or girth of steel surfaces (camouflage pattern) complete all as specified and directed by Engr in charge |
| 36 | M&L Hard core, broken stone or boulders 0f gauge n exc 63, deposit spread and levelled in layers n exc 15 mm thick watered and ramed to a true surface all as specified and as directed. |
| 37 | M&L Cement concrete 1:4:8 type D2 (using 40 mm graded stone aggregate) 100 mm thick as in sub base all as specified and as directed. |
| 38 | M&L Cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) 100 mm thick as in flooring all as specified and as directed. |
| 39 | M&L Second class hard wood in scantling, clean sawn timber framed and fixed work complete all as specified. |
| 40 | M&L 35mm 2nd class hardwood plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed |
| 41 | M&L 150mm long aluminium handles, cast type, anodised complete all as specified and directed complete all as specified and directed by Engr in Charge. |
| 42 | M&L 200mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed |
| 43 | M&L 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed |
| 44 | M&L Preparation of new wooden or wood base untreated surface and applying two coats of synthetic enamel paint over a coat of pink primer on wood surface complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysJul 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender