Tender For 84192/E8 Special Repairs To Bldg No P-19 At Af Hospital Jorhat Under Ge (Af) Jorhat
Tender Value
1.03 Crore
Estimated cost
Bid Submission
30 Jul 2026
21 days left
EMD
1.78 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jorhat → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For 84192/E8 Special Repairs To Bldg No P-19 At Af Hospital Jorhat Under Ge (Af) Jorhat
BOQ
| Sl. No. | Item Description |
| 1 | B/R SERVICES / WORKS :- |
| 2 | Dismantling of reinforced (reinforcement cut as required to facilitate demolition) cement concrete of any description and in any position as in roofs, floors (other than ground floor), beams, landing, chajjas and similar suspended work.and removing same from the site complete as specified and as directed |
| 3 | Demolition of cement concrete (unreinforced) in ground floors or pavings not exceeding 15cm thickness (below or above ground level) complete all as specified and as directed. |
| 4 | Dismantling of wrought iron iron or mild steel work of any description and in any position not otherwise provided complete all as specified and directed. |
| 5 | Use& Waste of Formwork for rough finished surfaces of concrete (flat) to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) etc. |
| 6 | Demolition of Brick Work built in Cement Mortar including all Quoins, Arches, Pillars, etc. of any descriptions, keep Service-able Bricks in Safe Custody for re-use, complete all as specified and as directed. |
| 7 | M&L Brick work with subclass 'B' Bricks straight or curved on plan exceeding 6m mean radius built in cement mortar (1:4) complete all as specified and as directed. |
| 8 | M&L Brick work with subclass 'B' Bricks straight or curved on plan to any radius in half brick thick wall built in cement mortar (1:4) complete all as specified and as directed. |
| 9 | Taking down Cement Plaster of any description on Brick Walls or on Concrete Surfaces including raking out Joints, hacking for Key, scrubbing down with Water, etc., and removing same from the Site(s), complete all as specified and as directed. |
| 10 | M&L for 15mm thick rendering in cement mortar (1:6) on brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed. |
| 11 | M&L for 15mm thick rendering in Cement Mortar 1:4 on Fair Faces of Brick or Concrete Surfaces including water proofing compound @ 3% by weight and finished fair and even, complete all as specified and as directed.NOTE :- WPC shall be measured and paid separately under respective item in this schedule here-in-after. |
| 12 | Supply only integral water proofing compound conforming to IS-2645 complete all as specified and as directed. |
| 13 | M&L applying two coats of Oil Bound Distemper over a coat of primer after prepration of new plastered wall surfaces complete all as specified and as directed |
| 14 | M&L applying Two Coats of Cement Base Paint after preparation of new plastered Surfaces of wall complete all as specified and as directed. |
| 15 | M&L for one coat of oil emulsion distemper after preparation of old decorated plastered surface of wall complete all as specified and as directed. |
| 16 | M&L for applying one coat of cement base paint after preparation of old decorated plastered surface of wall and washing rubbing down and stopping of painted surfaces complete all as specified and as directed |
| 17 | S&F 15mm dia (Bore) Steel Water Tubing, Galvanised, \\"Medium Grade\\" ISI marked with all Fittings, fixed to Walls, Ceiling or laid in Floors after taking down the old unserviveable 15mm dia GI tube in any position complete all as specified and as directed. |
| 18 | S&F 20mm dia (Bore) Steel Water Tubing, Galvanised, \\"Medium Grade\\" ISI marked with all Fittings, fixed to Walls, Ceiling or laid in Floors after taking down the old unserviveable 15mm dia GI tube in any position complete all as specified and as directed. |
| 19 | Dismantling timber scantling, 40 sqcm and over in section, in any position as in unframed work complete all as specified and as directed. |
| 20 | M&L 2nd class hard wood in scantaling clean sawn timber framed and fixed work complete all as specified and as directed. |
| 21 | S&F 2nd class hard wood clean sawn on timber fixed faces as in unframed work complete all as specified and as directed. |
| 22 | M&L treated with two coats of creosote oil after preparation of new or old wooden surface of any description and girth not otherwise described complete all as specified and as directed. |
| 23 | Taking down chowkats with shutters (without taking down of the shutter from the frame) area exceeding 1.50 Sqm but not exceeding 4.00 Sqm each complete all as specified and as directed. |
| 24 | Taking down chowkats with shutters (without taking down of the shutter from the frame) not exceeding 1.50 Sqm each complete all as specified and as directed. |
| 25 | M & L for well seasoned 2nd class hard wood plain, solid, straight chowkat and frames, wrought, framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified and directed. |
| 26 | S&F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 27 | M & L for preparation of untreated new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint (1st grade quality) over a coat of pink primer complete all as specified and directed. |
| 28 | S & F 100 mild steel Butt hinges, Medium weight, cold rolled and fixed complete all as specified and directed. |
| 29 | S&F 200 mm aluminum, anodised, barrel tower bolts of extruded section complete all as specified and directed. |
| 30 | S&F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed. |
| 31 | S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed. |
| 32 | S & F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre after dismantiling of wall and ceiling boards (fibre, pulp, insulation , etc) or insulation boards/slab / blanket of any thickness, including cover fillets .complete all as specified and directed. |
| 33 | S&F Hangers 6mm dia GI up to 1200mm length adjustable level fixed to roof slabs by means of ceiling cleats made out of GI flat 40X3mm size 60mm long and expansion hold fasteners 12.5 mm dia 40mm long complete all as specified and directed. |
| 34 | S&F Exposed metal frame ceiling with calcium silicate board 8mm thick of siliceous and calcareous material reinforced with celluose fibre for fixing in 600X600mm grid complete all as specified and directed. |
| 35 | Dismantling floor, hearth or wall tilling incl cement mortar bedding (But not backing ) and removing serviceable tiles to store and rubbish off the permisses complete all as specified and as directed. |
| 36 | M&L coloured non skid ceramic tiles of size 6 to 7 mm thick (Square /Rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in FLOOR etc set and jointed in neat cement slurry and pointed in white or colured cement to match over and including 20 mm thick cement screed bedding layer with cement mortar (1:6) complete all as specified and as directed. |
| 37 | S&F Glazed ceramic coloured tiles as in vertical surfaces such as DADO/ skirting etc, size 450x300x6 to 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 10 mm thick rendering with cement mortar (1:4) as backing layer of tiles complete all as specified and as directed. |
| 38 | M &L for 20-25mm thick Machine cut kota stone slab flooring over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over 20mm thick bedding layer in cement mortar (1:4) as screed bed complete all as specified and as directed. |
| 39 | M &L for 20-25mm thick Kota stone slab as in riser of steps, skirting, dado and pillar over and including 15 mm thick rendering in cement mortar 1:4 as backing layer of tiles complete all as specified and as directed. |
| 40 | Surface excavation not.exceeding 30cm deep and averaging 15cm deep and getting out as in hard / dense soil complete all as specified and as directed. |
| 41 | M&L for Hardcore of gauge not exceeding 63mm of broken stone deposited spread levelled in layers not exceeding 15 cm thick watered and rammed to a true surface as in footpath and passage complete all as specified and directed. |
| 42 | M&L Plain Cement Concrete,1:4:8, type D2 (using 40mm graded stone aggregates) as in foundation, filling and mass concreting including necessary use and waste of formwork complete all as specified and directed. |
| 43 | M&L for sand filling under floors or in foundations including watering and consolidation to true surface complete all as specified and as directed. |
| 44 | M&L for 60mm thickness, M-35 Grade Machine pressed precast concrete interlocking paver block of any shape and size confirming to IS 15658-2006 with grey cement and no pigment complete all as specified and as directed. |
| 45 | M&L for 25mm thick Plain Cement Concrete, 1:2:4, type B1 (using 20 mm graded stone aggregate) as in floorings including finishing the surface even and smooth without using extra cement, laying the top concrete floor complete all as specified and directed. |
| 46 | M&L for Plain Cement Concrete, 1:3:6, type C1 (using 20mm graded stone aggreate) as in kerbs including necessary use and waste of formwork, weathering, slightly rounded or chamfered angles plinth protection and throating complete all as specified and directed. |
| 47 | S&F Aluminium Powder Coated of any Colour (Thickness of Powder coating 50 micron minimum) Window, Sliding type,2-Track with Frame Size 50.3x26x1.2mm and 2 no. of shutter 40 x 18 x 0.9 mm with One Glass Shutters with Plain Float Glass of 4.0mm thick and One Gauge Shutter provided with Stainless Steel Wire Cloth 0.36mm nominal dia of Wire and average Width of Aperture 1.40mm including necessary Joining Cleats, Glazing Clips, EPDM Rubber/ Neoprene Gasket Packing and Anodised Aluminium Fittings viz Locking arrangements, etc. all as per requirment at Site of Work, complete all as specified and as directed.NOTE : Cost of Glass, Wire Clothes, Aluminium Joining Cleats, Glazing Clips, Rubber Packing, Anodised Aluminium Snap Beading, Anodised Aluminium Fittings, Screws, etc. all as per requirment at Site of Work will deem to be included in the Quoted Unit Rate. |
| 48 | S&F Anodised Aluminium Deco Grill (Anodised Transparent or Dyed to required Shade according to IS: 1868 with minimum Anodic Coating of Grade AC 15) of Approved Design/ Pattern, with Approved Standard Section and fixed to the existing Window Frame with C.P. Brass/ Stainless Steel Screws @ 200mm Centre to Centre, including Cutting the Grill to proper Opening Size for Fixing and Operation of Handles and fixing Approved Anodised Aluminium Standard Section around the Opening, complete all as per requirement at Site of Work, complete all as specified and as directed. |
| 49 | S&F 140mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed. |
| 50 | S&F 5 mm thick sheet glass, pin head type and glazing with oil putty in squares of ares exceeding 0.5 sq.m in each pane complete all as specified and directed. |
| 51 | S&F in repair hydraulically regulated door closer aluminium body heavy duty designation No 3, universal type, suitable for door shutter weighing between 61 Kg to 80 Kg complete all as specified and directed. |
| 52 | S&F in repair 150mm size extruded aluminium alloy handles, fabricated type anodised complete all as specified and as directed. |
| 53 | S&F 300mm size aluminums anodized sliding door bolts, ISI marked, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminum alloy and fixed complete all as specified and as directed. |
| 54 | S&F in repair 150mm long aluminium anodised barrel tower bolt of extruded section ans fixed complete all as specified and directed. |
| 55 | Supply and fix of 1000 liters capacity rotational moulded polyethylene (HDPE) water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position after taking down of old water storage tank of Capacity exceeding 500 but not exceeding 1000 litres in any position and removing to store complete all as specified and directed. |
| 56 | S&F 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints, fixed to wall with necessary fixing arrangement after demolition and breaking up 150mm bore PVC or AC drain pipe set in cement mortar complete all as specified and directed. |
| 57 | S&F 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints, laid in trenches after demolition and breaking up 100mm bore PVC or AC drain pipe set in cement mortar complete all as specified and directed. |
| 58 | S&F for 110mm bore PVC (SWR) bend of any radius complete all as specified and directed. |
| 59 | S&F for 110mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed. |
| 60 | S&f for 110 mm bore PVC(SWR) vent Cowl complete all as specified and directed. |
| 61 | S&F Mild steel in Roof trusses (framed), trussed, purlins, crane gantries, rails and fasteningsand heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats and grade Fe 410-W (Gde E-250) quality 'A' complete all as specified and directed. |
| 62 | Supply only Mild steel plates, plain or chequered, 5mm thick or over in thickness in available sizes complete all as specified and as directed. |
| 63 | S & F Mild steel bolts exc. 12mm and n exc. 20mm dia of neck , purpose made. with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut. exc 30cm long complete all as specified and directed. |
| 64 | M&L for Plain Cement Concrete (1:2:4), type B2 (Using 40mm graded stone aggregate) as in mass filling as in post holes.complete all as specified and as directed.. |
| 65 | Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering complete all as specified and as directed. |
| 66 | S&F Pre- painted galvalume aluminium zinc coated GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screw complete all as specified and as directed. |
| 67 | S&F Pre- painted galvalume aluminium zinc coated GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall,ridge,facia etc.complete fixed with self tapping screw complete all as specified and as directed. |
| 68 | S & F 0.63mm thick galvanised corrugated mild steel sheeting with two corrugations side lap with zinc coating 275 gms per sqm as in ridge, hips, valley gutters etc fixed with \\"L\\" or \\"J\\" type or crancked hook bolts and washers as in roof, walls etc. complete all as specified and directed. Please Enable Macros to View BoQ information |
| 69 | S & F 0.63mm thick galvanised corrugated mild steel sheeting with two corrugations side lap with zinc coating 275 gms per sqm as in ridge, hips, valley gutters etc fixed with \\"L\\" or \\"J\\" type or crancked hook bolts and washers as in roof, walls etc. complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 21 daysAug 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 28 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender