Tender For Maintenance/ Servicing And Replacement Of Lt Distribution Network And Associated Work Under Age E/M-I Of Ge 865 Ews
Tender Value
49.90 Lakhs
Estimated cost
Bid Submission
21 Jul 2026
11 days left
EMD
99800
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
leh → Ladakh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Maintenance/ Servicing And Replacement Of Lt Distribution Network And Associated Work Under Age E/M-I Of Ge 865 Ews
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in trenches not exc. 1.5 m wide and not exc. 1.5 m in depth and getting it out for laying of cable / pole in hard/dense soil complete all as specified and/or as directed by Engr-in-Charge. |
| 2 | Returning, filling in, including spreading, leveling watering, and well ramming in layers not exc 25 cm in hard/dense soil complete all as specified and/or as directed by Engr-in-Charge. |
| 3 | Removing surplus soil to a distance not exc. 50m and depositing where directed at a level not exc. 1.5m above the starting point complete all as specified and/or as directed by Engr-in-Charge. |
| 4 | Material and labour for Sand cushioning to underground cables 8 cm below the cable before laying & 15 cm above the cable after laying, complete all as specified in clause 19.75 of SSR Part-I, complete all as specified and/or as directed by Engr-in-Charge. Note : Punned thickness only will be measured and paid for. |
| 5 | Supply and laying of factory made, machine pressed, unreinforced, pre-cast concrete cable cover class LV type-1 flat size 250mm x 150mm x 50mm, complete all as specified and/ or as directed by Engr-in-Charge. |
| 6 | Labour only for laying of old serviceable cable covers retrieved from excavation complete all as specified and/ or as directed by Engr-in-Charge. |
| 7 | Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 185 sqmm 3.5 core including taking down old unserviceable cable complete all as specified and/ or as directed by Engr-in-Charge. |
| 8 | All as per Srl Item No 7 above, but of size 150 Sqmm 3.5 core. |
| 9 | All as per Srl Item No 7 above, but of size 120 Sqmm 3.5 core. |
| 10 | All as per Srl Item No 7 above, but of size 95 Sqmm 3.5 core. |
| 11 | All as per Srl Item No 7 above, but of size 70 Sqmm 3.5 core. |
| 12 | All as per Srl Item No 7 above, but of size 50 Sqmm 3.5 core. |
| 13 | All as per Srl Item No 7 above, but of size 35 Sqmm 3.5 core. |
| 14 | All as per Srl Item No 7 above, but of size 25 sqmm 3.5 core. |
| 15 | All as per Srl Item No 7 above, but of size 16 sqmm 4 core. |
| 16 | All as per Srl Item No 7 above, but of size 16 Sqmm 2 core. |
| 17 | All as per Srl Item No 7 above, but of size 10 Sqmm 4 core. |
| 18 | All as per Srl Item No 7 above, but of size 10 Sqmm 2 core. |
| 19 | Supply and fix in replacement of DPX3 MCCB with magnetic shot circuit and overload protection of capacity 800 Amps, 415 Volts, 50 Hz, 36 KA, four pole complete all as specified and/or as directed by Engr-in-Charge. |
| 20 | All as per Srl item No 19 above, but of capacity 630 Amps, 415 Volts, 50 Hz, 36 KA, four pole. |
| 21 | All as per Srl item No 19 above, but of capacity 400 Amps, 415 Volts, 50 Hz, 36 KA, four pole. |
| 22 | All as per Srl item No 19 above, but of capacity 320 Amps, 415 Volts, 50 Hz, 36 KA, four pole. |
| 23 | All as per Srl item No 19 above, but of capacity 200 Amps, 415 Volts, 50 Hz, 36 KA, four pole. |
| 24 | All as per Srl item No 19 above, but of capacity 160 Amps, 415 Volts, 50 Hz, 25 KA, four pole. |
| 25 | All as per Srl item No 19 above, but of capacity 100 Amps, 415 Volts, 50 Hz, 25 KA, four pole. |
| 26 | Supply, installation, testing and commissioning in replacement of LT Panel cubical type out door floor mounted weather proof totally enclosed, (CPRI approved) factory made and made out of 3.15 mm thick CRCA powder coated sheet and angle iron complete with bus bar of Aluminium of suitable size for capacity 1600 Amps 3 Phase and Neutral 415 Volts 50 Hz mounted on epoxy type insulators with PCC flooring and angle iron base frame complete all as specified and/ or as directed by the Engr-in-charge including following accessories:-(a) ACB 4 Pole, 415 V, with thermal magnetic release (adjustable type) of capacity 1000 Amps - 01 No (b) MCCB 320 Amp, 3 pole, 16 KA, 415 Volts - 3 Nos (c) MCCB 160 Amp, 3 pole, 16 KA, 415 Volts - 1 No (d) MCCB 125 Amp, 3 pole, 16 KA, 415 Volts - 1 No (e) Digital Volt meter with selector switch (0-500V) - 02 Sets (f) Digital Amp meter with selector switch with necessary CT (0-500A) - 02 Sets (g) LED indicating lamp - 02 Sets Note : (i) The make of MCCB considered are Havells/Standard/Indo Asian/HPL.(ii) The rates deemed to be inclusive of suitable size copper wirinng/copper strips from Main I/C MCCBs to Change over switch, Change over switch to Main Bus bar and Bus Bar to Outgoing MCCBs complete all as specified and directed. (iii) The design of Panel, make of complete accessories and drawing of the LT Panel should be submitted by the contractor for pre-approval from the Engr-in-Charge before order and execution at site. |
| 27 | Supply and fix in replacement of off load change over switch 415 Volts, side handle operated in sheet metal enclosure 4 pole of capacity 1000 Amps complete all as specified and/or as directed by Engr-in-Charge. |
| 28 | All as per Srl Item No 27 above, but of capacity 320 Amps. |
| 29 | All as per Srl Item No 27 above, but of capacity 200 Amps. |
| 30 | All as per Srl Item No 27 above, but of capacity 100 Amps. |
| 31 | Supply and fix in replacement of tubes light grade of size 80 mm bore galvanised with all fittings and fixed complete to walls and ceiling or laid in floors, complete all as specified and/or as by directed Engr-in-Charge. |
| 32 | Supply and fix in replacement of tubes light grade of size 50 mm bore galvanised with all fittings and fixed complete to walls and ceiling or laid in floors, complete all as specified and/or as directed by Engr-in-Charge. |
| 33 | Supply and fix aluminium thimble of size 10/16 Sqmm complete all as specified and/or as directed by Engr-in-Charge. |
| 34 | All as per Srl Item No 33 above, but of size 35/50 Sqmm. |
| 35 | All as per Srl Item No 33 above, but of size 70/95 Sqmm. |
| 36 | All as per Srl Item No 33 above, but of size 120/150 Sqmm. |
| 37 | All as per Srl Item No 33 above, but of size 185/240 Sqmm. |
| 38 | All as per Srl Item No 33 above, but of size 300/400 Sqmm. |
| 39 | Supply and fix in replacement industrial socket with box for surface mounting of capacity 32 A, 2P+E, 230 Volts with IP 55 protection complete all as specified and/or as directed by Engr-in-Charge. |
| 40 | Supply and fix in replacement industrial socket with box for surface mounting of capacity 63 A, 3P+N+E, 415 Volts with IP 66 protection complete all as specified and/or as directed by Engr-in-Charge. |
| 41 | Material and labour for painting of 9 mtr steel tubular pole after scrapping and peeling of the old existing paint, corrosive patches and painting primary coat with synthetic enamelled silver paint and another final second coat to match the entire surface area of the pole and highliting the pole with 20 CM wide alternate white and red radium strips upto height of 1 mtr from ground level complete all as specified and/or as directed by Engr-in-Charge. |
| 42 | Material and labour for painting of 11 mtr steel tubular pole after scrapping and peeling of the old existing paint, corrosive patches and painting primary coat with synthetic enamelled silver paint and another final second coat to match the entire surface area of the pole and highliting the pole with 20 CM wide alternate white and red radium strips upto height of 1 mtr from ground level complete all as specified and/ or as directed by Engr-in-Charge. |
| 43 | Taking down old unserviceable feeder pillar box and supply and fix feeder pillar box of suitable size with opening for incoming/outgoing cables, 415V, with 4 Nos of aluminium bus bar strip complete all as specified and/ or as directed by Engr-in-Charge. |
| 44 | Material & labour for earthing using galvanized steel earth plate electrode 600mm x 600mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr depth below normal ground level) with top edge of earth plate not less than 1.5 mtr below normal ground level connected to and including galvanized steel strip 32 mm x 6 mm size as earth lead upto equipment by means of steel bolts, nuts, check nuts and washers, test point made of GI strip 10cm thick PCC 1:2:4, type B-1 in pit with precast RCC 1:2:4 type B-1 in cover reinforced with XPM not less than 4 Kg per Sqm with 40mm bore GI light grade protection pipe, 20mm bore GI medium grade watering pipe with funnel including charcoal, dust, salt, all as shown in electric plate No 3 of SSR Part-I (2009) Specifications, complete with necessary earth work in any type of soil, removal to a distance not exceeding 50 mtr including testing on completion & taking out old unserviceable earthing, complete all as specified and/ or as directed by the Engr-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysJul 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender