Tender For Certain Repair To Roofing, Flooring, Plastering And Misc B/R Works To Otm Accn Of Sector B Under Ge 865 Ews
Tender Value
42.50 Lakhs
Estimated cost
Bid Submission
03 Aug 2026
3 days left
EMD
85000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
leh → Ladakh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Certain Repair To Roofing, Flooring, Plastering And Misc B/R Works To Otm Accn Of Sector B Under Ge 865 Ews
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 06-Jul-2026 | REVISED BOQ | BOQ | 21-Jul-2026 |
| 2 | 21-Jul-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 28-Jul-2026 |
| 3 | 28-Jul-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 03-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement plaster on brick or concrete surfaces including racking out joints, hacking for key, scrubbing down with water etc. complete all as specified and/ or as directed by Engr-in-Charge. |
| 2 | Material and labour for 15 mm thick rendering in CM (1:4) on other than fair faces of brick work finished the surface even & smooth without using extra cement, complete all as specified and/ or as directed by Engr-in-Charge. |
| 3 | Material and labour for 15 mm thick rendering in CM (1:6) on fair faces of brick work finished the surface even & smooth without using extra cement, complete all as specified and/ or as directed by Engr-in-Charge. |
| 4 | Preparation of new plastered wall surface of any description and applying two coats of cement based paint over a coat of primer complete all as specified and/or as directed by Engr-in-Charge. |
| 5 | Preparation of new plastered wall surface of any description and applying two coats of distemper oil emulsion over a coat of primer complete all as specified and/or as directed by Engr-in-Charge. |
| 6 | Material and labour for light shade Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exc 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles including 15 mm thick screed in cement mortar (1:6) as in floors etc. including dismantling existing floor tiling with cement mortar bedding (but not backing), removing serviceable tile to store and rubbish off the premises complete all as specified and/or as directed by Engr-in-Charge. |
| 7 | Material and labour for Non-skid coloured Ceramic joint free tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar 1:6 including dismantling existing floor tiling with cement mortar bedding (but not backing), removing serviceable tile to store and rubbish off the premises complete all as specified and/or as directed by Engr-in-Charge. |
| 8 | Material and labour for Non-skid coloured Ceramic joint free tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar 1:6 including dismantling existing floor tiling with cement mortar bedding (but not backing), removing serviceable tile to store and rubbish off the premises complete all as specified and/or as directed by Engr-in-Charge. |
| 9 | Material and labour for glazed ceramic coloured tiles in vertical surfaces of size 450x350x7mm thick set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including rendering 10 mm thick in cement mortar (1:4) as in backing coat including dismantling existing wall tiling with cement mortar bedding (but not backing), removing serviceable tile to store and rubbish off the premises complete all as specified and/or as directed by Engr-in-Charge. |
| 10 | Supply and fix 0.63mm thick black, corrugated mild steel sheeting with two corrugation side lap, fixed with coach screws and washers in roofs, walls etc. with grade of zinc coating 275 including dismantling of existing plain or corrugated steel sheeting any gauge thickness of Nanital or similar pattern, complete all as specified and/ or as directed by Engr-in-Charge. |
| 11 | Supply and fix 0.63mm thick plain black mild steel sheeting as in ridges, hips, valley gutters drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 including dismantling of existing plain or corrugated steel sheeting any gauge thickness of Nanital or similar pattern, complete all as specified and/ or as directed by Engr-in-Charge. |
| 12 | Supply and fix Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of existing plain or corrugated steel sheeting of any description, complete all as specified and/ or as directed by Engr-in-Charge. |
| 13 | Supply and fix Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of existing plain or corrugated steel sheeting of any description, complete all as specified and/ or as directed by Engr-in-Charge. |
| 14 | Supply and fix Fibre glass reinforced translucent plain sheeting 2mm thick with two corrugations side lap fixed with coach screw and washer in roof, wall etc. including dismantling of existing plain or corrugated sheeting of any description, complete all as specified and/ or as directed by Engr-in-Charge. |
| 15 | Material and labour for 2nd class hard wood clean sawn as in scantling fixed with nails, framed and fixed as in framed work including dismantling of existing timber scantlings 40 Sqcm and over in section, in any position complete all as specified and directed. |
| 16 | Dismantling wrought iron or mild steel work of any description not otherwise provided for angle iron or flat iron as in post and guard bars or grating, complete all as specified and/or directed by Engr-in-Charge. |
| 17 | Supply and fix mild steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240, complete all as specified and/or as directed by Engr-in-Charge. |
| 18 | Supply and fix MS Rolled sections in main and cross beams, hip and jack rafters; purlins where connected to common rafters running rails and guids for sliding doors; fixed with angle cleats or other connecting plates and similar work confirming to Fe-410-W (Gde-E-250) quality 'A' complete all as specified and/ or as directed by Engr-in-Charge. |
| 19 | Preparation of new steel surface of any description not exc. 10cm grith or width, not otherwise described with one coat of red oxide zinc chrome primer followed by two coats of synthetic enamel paint complete all as specified and/ or as directed by Engr-in-Charge. |
| 20 | Preparation of old decorated steel or steel based surface of any description not exc. 10cm grith or width, not otherwise described with one coat of synthetic enamel paint complete all as specified and/ or as directed by Engr-in-Charge. |
| 21 | Material and labour for roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc. and brushing neat cement slurry with 3.0 Kg of cement per sqm complete all as specified and/ or as directed by Engr-in-Charge. |
| 22 | Material and labour for 5 mm thick rendering in CM (1:4) on concrete surfaces including mixing water proofing compound and finished even and smooth without using extra cement, complete all as specified and/ or as directed by Engr-in-Charge. |
| 23 | Material and labour for priming surfaces and applying normal treatment (for moderate condition) for APP based polymeric membrane minimum weighing 3 kg/sqm and minimum 3mm thick reinforcement with polyster non woven fabric (weight not less than 150 gms/sqm) laid on primed surface application including preparation of new surface and removal of old water proofing treatment and applying two coats of aluminium paint, complete all as specified and/ or as directed by Engr-in-Charge. |
| 24 | Supply and fix in repair stainless steel wall peg set for cloth hanging (6 pin) complete all as specified and/ or as directed by Engr-in-Charge. |
| 25 | Supply only integral liquid water proofing compound.Make : Pidilite/Sika or equivalent make as approved by GE. |
| 26 | Taking down shutters of any description exc 1.0 Sqm and not exc 2.0 Sqm each, resecuring, easing, adjusting and refixing in the same opening complete all as specified and/or as directed by Engr-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 28, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 21, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Jul 28, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Completed
Aug 03, 2026
18:00 IST
Corrigendum-3 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 3 daysAug 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysAug 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender