Tender For Repair To Retaining Walls, Interlocking Tiles In Ops Location Under Ge (Af) Jammu.
Tender Value
20 Lakhs
Estimated cost
Bid Submission
21 Jul 2026
12 days left
EMD
40000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jammu → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Repair To Retaining Walls, Interlocking Tiles In Ops Location Under Ge (Af) Jammu.
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brick work built in cement mortar or cement lime mortar including all quoins, arches etc all as specified and directed by Eng-in charge Add Note : Including removal of unserviceable demolished debris out of defence line and dumped at govt approved dumping area and no extra payment will be made to contractor against the same. |
| 2 | M&L for brick work with sub class 'B' bricksstraight or curved on plan exc. 6.00m meanradius built in cement mortor 1:6 all as specified and directed by Eng-in charge |
| 3 | Material & labour for brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick walls built in CM 1:4 all as specified and directed by Eng-in charge |
| 4 | M&L RR stone masonary uncoursed well bonded bedded and solidly hearted build in CM 1:6 including demoliton of any wall /stone work all as specified and directed by Eng-in charge . Add Note : Including removal of unserviceable demolished debris out of defence line and dumped at govt approved dumping area and no extra payment will be made to contractor against the same. |
| 5 | Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level). all as specified and directed by Eng-in charge Notes:-Demolished material should be thrown out of the defence line at govt approved dumping area. |
| 6 | M&L PCC Type C- 1 (1:3:6 ) using 20 mm greaded crushed stone aggregate, as in bond stone in CM 1:6 all as specified and directed by Eng-in charge |
| 7 | Hand packing (any thickness) at back of walls over arches etc. and raising (or lowering) to the required level all as specified and directed by Eng-in charge |
| 8 | S&F PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints fixed to walls as in weep holes all as specified and directed by Eng-in charge |
| 9 | M&L riased pointing RR masonary in CM 1:4 all as specified and directed by Eng-in charge |
| 10 | Dismantling wrought iron or mild steel work of any description as provided for Roof trusses, trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) all as specified and directed by Eng-in charge |
| 11 | M&L for MS framed structure roof trusses (framed), trussed, purlins,water tank stand, crane gantries and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats of Grade Fe 410 -W (Gde- E- 250) quality- A etc. all as specified and directed by Eng-in charge |
| 12 | S&F PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints fixed to walls as in weep holes all as specified and directed by Eng-in charge |
| 13 | Dismantling existing unservicable floor/wall tiles , Paver blocks any size , any description including bedding/screed layer all as specified and directed by Eng-in charge Notes:-Demolished material should be thrown out of the defence line including loading,transportation,unloading of debris at govt approved dumping area.Also no extra cost shall be paid to the contractor by department. |
| 14 | M&L Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed. Add Note : Including removal demolished debris out of defence line and dumped at govt approved dumping area and no extra payment will be made to contractor against the same all as specified.. |
| 15 | M & L Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed. Add Note : Including removal demolished debris out of defence line and dumped at govt approved dumping area and no extra payment will be made to contractor against the same all as specified.. |
| 16 | M&L Providing and laying 100mm thick factory made chamfered edge cement concrete paver block of M-50 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand;all as specified and directed. Add Note : Including removal demolished debris out of defence line and dumped at govt approved dumping area and no extra payment will be made to contractor against the same all as specified and directed by Eng-in charge |
| 17 | M&L Providing and laying 100mm thick, machine pressed; set, jointed and pointed in net cement slurry in floors, and cut and polished with grey cement and no pigment, laid over 20 mm thick bedding layer of cement mortar 1:4 all as specified and directed by Eng-in charge. Add Note : Including removal demolished debris out of defence line and dumped at govt approved dumping area and no extra payment will be made to contractor against the same all as specified and directed by Eng-in charge |
| 18 | M&L for Cement concrete chequered tiles 30cm x 30xm x22mm thick, machine pressed; set, jointed and pointed in net cement slurry in floors, and cut and polished with grey cement and no pigment, laid over 20 mm thick bedding layer of cement mortar 1:4 all as specified and directed by Eng-in charge |
| 19 | M&L PCC in foundations, filling and mass-concrete type C2 (1:3:6) using 40 mm graded stone aggregate all as specified and directed by Eng-in charge |
| 20 | M&L PCC type B1 (1:2:4) using 20 mm graded aggregate as in copings, bond stone, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded for chamfered angles and throating, all as specified and directed by Eng-in charge |
| 21 | Dismantling posts or struts (wood, Steel or RCC) any section, including takingout embedded portion and making good distrubed ground etc complete all as specified and directed by Eng-in charge . Notes:-Demolished material except items considered sch of credit should be thrown out of the defence line including loading,transportation,unloading of debris at govt approved dumping area.Also no extra cost shall be paid to the contractor by department. |
| 22 | Excavation in post holes (or similar holes) each not exc 0.5cum getting out in any type of soil, returning, filling in and ramming earth or broken rubber mixed with earth around in layers not exc 15cm complete all as specified and directed by Eng-in charge |
| 23 | S&F MS work as in Post and Struts in fencing including cutting tops to shape as directed drilling holes nothing for wire etc flat iron fillets (for securing wire mesh etc) including all necessary drilling bolts or riveting etc and similar work.complete all as spd and directed. |
| 24 | M&L Mild Steel sections confirming to FE-410-W as in Framed work as in doors, gates of angles or other section with gusset plates, rails etc including necessary cutting, drilling, welding etc complete all as per directed by Engr- in charge and any type of ornament pattern and design as approved by GE.Note:-1.Contractor shall not have any claim in respect of design/Ornamental shape/designer member,the differnece of rate and amount of desinger pattern will not be paid by Department. |
| 25 | S&F galvanised 2nd stand steel wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts including securing or tying at crossings with and provn of galvanised mild steel wire staples or steel pins etc all as specified and directed by Eng-in charge |
| 26 | S&F 4mm dia galvanised steel wire chain link fencing size 75x75mm mesh including line wires any mesh size and type to any type or standards, rails, straining bolts etc including provision of binding wire including dismantling old uncerviceable chain link fencing any type any size complete all as specified and directed by Eng-in charge |
| 27 | S&F,concertina coil fencing with punch tape concertina coil 650mm dia, strached to 6.0 meter length, having 50 nos sprial turns per 6.0 meter length, spring core wire (2.59mm thick) of high rensile strength of 1620 N/sqm with tape (0.52mm thick) hot dip galvanised upto 20 micros and weight of each coil 10 to 12 Kg and fixing the same on Y shaped angle iron 8 horizontal R.B.T ( Reinforced barbed tape ) stud tied with GI staple sand GI clips to retain horizontal clips shall be @5 Nos per 2 sprial turns approximate 125 clips per coil including necessary bolts cinokete aklk and removing as specified and as directed. Note: for measurement purpose overall lenght of the wire shall be measured) the get approved by AGE before procurment. |
| 28 | M&L for Preparation of new or untreated steel surface of any description exc. 10 cm. in width or girth and applying two coats of synthetic enamel paints, over a coat of red oxide zinc chrome primer, complete all as specified and directed by Engr-in-charge. |
| 29 | SCHEDULE 'A' PART-II (Schedule of credit) Credit amount of Rs (Refer schedule of credit) for retrieved material mentioned in Sch 'A' Part-II of Tender documents in PDF form will be deducted offline during acceptance of tender of lowest bidder. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysJul 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender