Tender For Providing And Laying Of Sewer Network Including Sumpwell In Newly Develped Colonies On Ali Jan Road Shahbeigh Colony, King Colony, Iqbal Colony, Tawheedabad, Shah-E-Hamdan Colony And Other Adjoining Lanes (Adv. Cost Of Rs. 365.58 Lacs)
Tender Value
3.65 Crore
Estimated cost
Bid Submission
15 Jul 2026
4 days left
EMD
7.31 Lakhs
Bank guarantee accepted
Document Fee
4000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Srinagar → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing And Laying Of Sewer Network Including Sumpwell In Newly Develped Colonies On Ali Jan Road Shahbeigh Colony, King Colony, Iqbal Colony, Tawheedabad, Shah-E-Hamdan Colony And Other Adjoining Lanes (Adv. Cost Of Rs. 365.58 Lacs)
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres (All kinds of soil). |
| 2 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth asdirected (All kinds of soil). |
| 3 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 4 | Close timbering in trenches including strutting, shoring and packing cavities (wherever required) complete. (Measurements to be taken of the face area timbered). |
| 5 | Depth Exceeding 1.5m but not exceeding 3.0m. |
| 6 | Depth Exceeding 3.0m but not exceeding 4.5m. |
| 7 | Extra for planking, strutting and packing materials for cavities (in close timbering), if required to be left permanently in position. (Face area of timber permanently left to be measured). |
| 8 | Dismantling manually/ mechanically including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge (Bituminous road). |
| 9 | Supply & laying of stone soling in horizontal on level including ramming, Watering and dressing (Complete Job). |
| 10 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: |
| 11 | 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 12 | 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 13 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level |
| 14 | 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 15 | 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 16 | Reinforced cement concrete work in well-steining including curing but excluding the cost of centering, shuttering, finishing and reinforcement, with(1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 17 | Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.(In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works). |
| 18 | Providing & Laying to level & slope, with proper grade pipes of Class NP3/NP4 of following internal dia & grouting the pipe joints with cement slurry 1: 2 mix (1 cement: 2 fine sand) and also sealing the pipe joints with fixing of Rubber Gaskets incl. Cost of cement, sand, Rubber gaskets and RCC pipes incl. Testing of joints & all carriages of pipes upto site of work (Complete job). |
| 19 | 250mm dia NP3 |
| 20 | 300mm dia NP3 |
| 21 | 400mm dia NP4 |
| 22 | Centering and shuttering incl. Strutting, propping etc and removal of form work for:- |
| 23 | Foundations, footings, bases of columns etc. for mass concrete |
| 24 | Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. |
| 25 | Extra for shuttering in circular work (20% of respective centering and Shuttering items) |
| 26 | Suspended floors, roofs, landings, balconies and access platforms. |
| 27 | Edges of slabs and breaks in floors and walls Above 20 cm wide |
| 28 | Extra for shuttering in circular work (20% of respective centering and Shuttering items) |
| 29 | Well steining |
| 30 | Extra for shuttering in circular work (20% of respective centering and Shuttering items) |
| 31 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level (Thermo-Mechanically Treated bars of grade Fe-500D or more). |
| 32 | Providing & Fixing of Polycrate Manholes covers & frame including all safe carriages upto site of work (Complete Job). |
| 33 | Providing, Laying and Spreading of granular Sub Base in trenches in uniform layers including dressing, watering, ramming etc and carriage by tippers to site of work with all leads and lifts (Complete Job). |
| 34 | Providing & Fixing of Square Shaped Polycrate Manholes covers & frame size 600mm * 600mm including all safe carriages upto site of work (Complete Job). |
| 35 | Well sinking to level including supply / engagement of all types of well sinkers including Headman; Assistant Well sinker, Labour (Skilled / unskilled) supply of sand,E.C. Bags, filling of sand into E.C. Bags, including stitching loading/unloading of sand filled Bags after every casting on plate form, providing of plate form of required strength including its fixing/Removal after every casting disposal of loading material and including cost of scaffolding charges, carriage of all materials what so ever involves. The job includes providing and fixing of 0.63mm×300mm G.I. Sheet after every casting/joints to prevent leakage including adjustment to steel edge in level on ground after preparation of ground by w ay of levelling etc (Complete Job). |
| 36 | Providing orange colour safety foot rest of minimum 6mm thick plastic encapsulated as per IS : 10910 on 12mm dia steel bar conforming to IS : 1786 having minimum cross section as 23 mmx25 mm and over allminimum length 263mm and width as 165mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture’s permanent identification mark to be visible even after fixing. including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 ( 1 cement :3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design. |
| 37 | Provision for repair and restoration of under ground utilities like water supply pipes (G.I, HDPE, Cast Iron,MS Pipe etc) Telephone Cables and optic fibre etc, inlcuding all accessories required to rectify the damage caused to its original position in all respects including all carriages all told to be paid as per actual. |
| 38 | Supply, installation, testing and commissioning of allied mechanical items complete as per scope of work at site, including providing, fabrication, laying, fitting and fixing of M.S. delivery pipe line / rising main from pump diffuser up to disposal point, complete with all accessories, specials, flanged bends, flanged expanders, reducers, tees, puddle flanges, dismantling joints, non-return valves, sluice valves, air valves, scour arrangements, collars, supports, clamps, anchor fasteners and all types of bends, flanges, nuts, bolts, washers, rubber insertion, gaskets and jointing materials, as required for satisfactory operation. The work shall include cutting, welding, threading, alignment, lowering, fixing, testing, commissioning, anti-corrosive painting/coating, earth excavation, trenching, bedding, refilling, disposal of surplus earth and all incidental mechanical/civil works necessary for complete installation of the delivery main in all respects as per site conditions, manufacturer's snecifications and directions of Engineer-in-Charge (Complete Job). |
| 39 | Fabrication, providing, fitting and fixing of M.S. Gantry over sump complete, consisting of 02 Nos. vertical columns fabricated out of ISMC-100, 3.00 metres long placed face to face, with 300mm x 300mm M.S. plates 12mm thick fitted/welded at top and bottom sides of columns. Bottom plates shall be properly welded to reinforcement of sump and grouted in PCC complete. The gantry shall include providing and fixing of ISMB-150, 4.00 metres long, placed over and welded to the top plates of the columns, complete in all respects. The item shall further include providing, fitting and fixing of one No. 2-tonne capacity chain pulley block with monorail and hoisting chain, including all clamps, brackets, fasteners, welding, erection, primer/paint coating. alignment and testing complete as per site requirements and directions of Engineer-in-Charge. |
| 40 | Providing and fixing of D.I. Sluice Valve (with cap) complete with bolts, nuts rubber insertions, tail pieces etc (400mm dia) approved make, ISI branded) as per directions of Engineer-In-Charge (Complete Job). |
| 41 | Supply, installation, testing and commissioning of submersible type pump set with motor, submersible starter and all allied mechanical and electrical components/items as per manufacturer's recommendations, guide lines and site requirements, conforming to latest relevant IS standards and codes, complete with fail-safe circuit devices for protection against overloading, underloading, clogging, shut-off, low liquid level, single phasing and overheating, complete in all respects. The pump shall be non-clog centrifugal volute type sewage submersible pump having minimum capacity 33 litres/sec, discharge size 150 mm dia or above, head 18 metres or above, speed below 1500 RPM, SS/CF8M/Grey Cast Iron impeller, motor casing as per OEM standards, stainless steel/carbon steel shaft, solid handling capacity 45 mm or above, overall efficiency 70% or above, coupled with submersible 3-phase electric motor of minimum 15 kW rating, 50±3% Hz frequency, Class-F insulation, IP-68 protection, operating on 415V±8%, complete with Star-Delta starter, minimum 15 metre submersible cable, control panel, guide rail system, lifting chain, duck foot bend/base elbow, non-return valve, sluice valve, delivery connections, gantry arrangement over sump for lifting, proper earthing, wiring, accessories, testing, trial run and commissioning complete as per specifications and directions of Engineer-in-Charge. |
| 42 | Providing & laying House connections with the following PVC accessories of ISI make (Prince-B Type) incl. all carriages (Complete Job). |
| 43 | PVC Pipe 100mm dia |
| 44 | PVC Pipe 150mm dia |
| 45 | Carriage of Materials by Mechanical Transport from Source to site of work: - |
| 46 | Stone soiling Athwajan avg 16kms |
| 47 | Stone Agg 40mm from Athwajan avg 16kms |
| 48 | Stone Agg below 40mm from Athwajan avg 16kms |
| 49 | Sand from Ganderbal avg 20kms |
| 50 | Cement & Steel from Source avg 6kms Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysJul 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender