Tender For Construction Of Weigh Bridge Room Size 3.00M X 3.00M At N.M.Y. Atrauli.
Tender Value
4 Lakhs
Estimated cost
Bid Submission
15 Jul 2026
12 days left
EMD
4000
Bank guarantee accepted
Document Fee
900
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Aligarh → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Weigh Bridge Room Size 3.00M X 3.00M At N.M.Y. Atrauli.
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in foundation in ordinary soil (Loam, clay or sand) including lift up 1.50 M & lead upto 30m including filling watering and ramming of excevated earth upto the trenches or into the space between the building & sides of the foundation trenches or into the plinth and remocal & disposal or surplus earth as directed by the E/I as upto a distance of 30m from the foundation trenches. (SI 251) |
| 2 | Concrete with 4cm gauge stone ballast C/sand & cement in foundation & under floor in the proportion of 12:6:1 including supply of all material labour T&P etc. required for proper completion of the work. (SI 273a) |
| 3 | Providing and laying cement concrete in 1:1.5:3 ( 1 Cement : 1.5 Coarse sand : 3 graded stone agregate 20 mm nominal size) including supply of all materials, labours and T&P etc. required for proper completion of the work. In foundation and floors. DSR. No. 5.1.2(a). |
| 4 | Reinforced cement concrete work in walls (any thickness), including attached pilasters,buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. including cost of centering, shuttering, finishing and excluding reinforcement 1:1.5:3(1cement :1.5 Coarse sand : 3 graded stone aggregate 20mm nominal size) upto plinth Level. DSR. No. 5.2.2(1) |
| 5 | Glass-150 brick work in 1:6 cement and coarse sand mortar in foundation and plinth including supply of all material, labour and T&P etc. required for proper completion of the work. DSR.No. 6.1.2 |
| 6 | Providing and laying cement concrete in 1:1.5:3 ( 1 Cement : 1.5 Coarse sand : 3 graded stone agregate 20 mm nominal size) including supply of all materials, labours and T&P etc. required for proper completion of the work. In foundation and floors. DSR. No. 5.1.2(a). |
| 7 | Earth filling in plinth cartage upto 5.00Km from site including supply of necessary quantity of sand from any distance at site of work and including watering dressing etc. required for proper completion of work. |
| 8 | Sand filling in plinth including supply of necessary quantity of sand from any distance at site of work and including watering dressing etc. required for proper completion of work. |
| 9 | Reinforced cement concrete work in walls (any thickness), including attached pilasters,buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. including cost of centering, shuttering, finishing and excluding reinforcement 1:1.5:3(1cement :1.5 Coarse sand : 3 graded stone aggregate 20mm nominal size) above plinth level upto fifthh floor level. |
| 10 | M-150 brick work in 1:4 cement C/sand of 2.25 FM mortor in super structure,in one brick thick wall including necessary cutting and moulding of brick and also including supply of all material, labour and T&P ect. Required for proper completion of the work. (DSR 6.4.1) |
| 11 | Reinforced cement concrete work in in beams, suspended floors roofs having slope upto 15 landings, balconies, shelves, chajjas, lintles, bands, plaint window sills, staircases and spiral stair cases above plinth level upto floor five level, excluding the cost of centering shuttering finishing and reinforcement with 1:1.5:3 ( 1cement:1.5coarse sand:3 graded stone aggregate 20mm nominal size) DSR 5.3 |
| 12 | M-150 brick work in 1:4 cement C/sand of in super structure in half brick work including supply of all materials, labour & T&P ect. Required for proper completion of the work. |
| 13 | Providing and fixing angle/Tee iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x5 mm flat pieces to the existing T-iron frame or to the wall with desh fastener, including fixing of necessary but hinges and screws and applyng a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge. |
| 14 | Mild Steel Iron Grill & Staircase railing of a approved qualitiy and drawing including supply of all materials, fabrication, labour, T&P in all respect as per direction of Engineer-in-charge for proper completion of work at site. |
| 15 | Supply & Fixing of 4.00mm thick glass panes with atul or equivalent I.S.I. marked quality glass with putty and brad including supply of all materials labour & T&P ect. Required for proper completion of the work. SI. 806 (b) |
| 16 | 4.0cm thick 1:2:4 plain cement Concrete floor with cement approved coarse sand and 2.0cm gauge approved stone grit laid in panels finsished with 3mm floating cost of neat cement with 15cm base concrete 12:6:1 stone ballast Coarse sand and cement including supply of all materials, labour anad T&P etc. required for propar complition of the work. |
| 17 | 4.0cm thick 1:2:4 plain cement Concrete floor with cement approved coarse sand and 2.0cm gauge approved stone grit laid in panels finsished with 3mm floating cost of neat cement and including supply of all materials, labour anad T&P etc. required for propar complition of the work. |
| 18 | Providing and fixing glass strips of 4mm thickness and 3.5 cm deep in joints of floors & skirting at the time of laying floors flush with floor level including supply of all matereials. Labour and T&P ect. Required for propar completion of the work ( SI 631-b) |
| 19 | Supply and fixing 32mm thickof flush doors, commercial quality conforming of I.S. 2202 part-1 (1983) including fixing of wooden cleats and stoppers and including fixing and adjustment of hinges, bolts, locks, handles, springs, fitting with necessary screws to be supplied departmentally |
| 20 | Providing and fixing alumiium sliding door bolts, ISI marked anodised anodic coating not less than grade AC 10 as per IS : 1868 , transparent or dyed to required colour or shade, with nuts and screws etc. Complete 250x16mm |
| 21 | Providing and fixing 125mm aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete: |
| 22 | Mild steel or Iron work in plain work such as reinforcement concrete or reinforced brick work wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bends hooks and authrised overlapping shall be meassured. |
| 23 | Providing and laying \\"brick coba\\" 12mm thick laid with M-150 class brick bat coba 7.50cm thick with gap of 15mm to each other, over 20mm thick base of cement mortar 1:4 cement and coarse sand mixed with water proofing compound spreding cement slurry mixed with acrelic cement concrete water proofing compound filled gaps of coba & top of coba mortar mixed with water proofing compound in 1:4 cement and coarse sand mortar finished smooth & top mashed false square 30cm×30cm and side wall parapet shall be mono tythic plaster wall upto 30cm higher and junction and corner shall be rounded by brick ballast cement and coarse sand masonary coba with top finished plaster mixed with acetic water proofing compound @ 2% by weight & including supply of all material, labour, T&P etc complete for proper completion of work. |
| 24 | Providing and fixing on wall face unplasticised Rigid single socketed 110 mm diameter. PVC rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion, DSR No. 12.41.2 |
| 25 | 6 mm thick plaster 1:3 in Cement and coarse sand in ceiling including supply of all materials,labour, & T&P etc. required for proper completion of the work |
| 26 | 12mm thick plaster in 1:4 cement and coarse sand mortor over brick work minium thickness not to be less than 10mm including supply of all materials labour and T&P etc. required for proper completion of the work (584 -II) |
| 27 | 2cm thick cement plaster in dado or skirting in 1:4 cement and c/sand laid in finished with 3mm floating coat of neat cement including supply of all materials,labour,and T*P etc. required for proper completion of the work (SI 590) |
| 28 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with wooden Primer of approved brand and manufacture including cost of all material, Labour, T&P etc. complete required for proper completion of the work. DSR.No. 13.62.1 |
| 29 | Distempering (Two coat) with oil bound distemper of approved brand and manufacture and of required shade on undercoated wall surface to give an even shade over & including a priming coat with cement primer of approved brand and manufacture such as Berger, J&N, Shalimar, Asian, paints after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even with plaster of approved synthetic material and sand papered smooth including cost of all materials, Labours, T&P etc. complete required for proper completion of the work. SI. No. 649 + 650 |
| 30 | Finishing walls with extorior emulsion paint (Apex) of approved brand and manufacture and of required shade and undacoreated wall surface to give even shade over @ 1.25 Ltr/10sqm including one coat of primer applid @ 0.75Ltr/10sqm coat curing and cost of all material, labour, T&P etc. required for proper completion of work for two coat. (SI 35) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysJul 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender