Tender For Ward.14 Zone 03A Road Construction Work Next To Gupta Saluja Petrol Pump Till Agarwal Nut Bolt Factory.
Tender Value
52.03 Lakhs
Estimated cost
Bid Submission
13 Jul 2026
3 days left
EMD
1.05 Lakhs
Bank guarantee accepted
Document Fee
3500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kanpur → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Ward.14 Zone 03A Road Construction Work Next To Gupta Saluja Petrol Pump Till Agarwal Nut Bolt Factory.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 06-Jul-2026 | DATE EXTENDED | Date | 13-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Excavation for roadway in soil using manual means for carrying of cut earth to embankment site with a lift upto 1.5m and lead upto 50m as per SOR 2.1.1 |
| 2 | Providing and laying in position in C.C. specified grade excluding the cost of centering, shuttering All work upto plinth level 1:4:8 ( 1 cement: 4 Coarse sand zone III : 8 graded stone aggregate 40mm (nominal size) |
| 3 | Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density as per MORD specification 401 |
| 4 | Providing, Laying, Spreading and compacting graded stone aggregates to Wet Mix Macadem specification including premixing the material with water at OMC in mechanical Mixer (Pug Mill) carriage of mixed Material by tipper to site,laying in uniform layers in sub base/base course on a well prepared sub base and compacting with smooth wheel roller 80-100 KN weight to achieve the desired density including lighting,barricating and maintenance of diversion,etc,as per tables 400.11 & 400.12 and Technical Specification Clause 406. |
| 5 | Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per Technical Specification Clause 502 |
| 6 | Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to .30 kg per sqm on the prepared granual surfaces treated with primer & cleaned with Hydraulic broom as per Technical Specification Clause 503 |
| 7 | Providing and Laying bituminous Macadem with higher capacity hot mix plant using crushed aggregates of specific grading premixed with bituminous binder transported to site, laid over a previously prepared surface with paver finisher to the required grade level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction. |
| 8 | Providing and Laying bituminous Concrete with higher capacity batch type hot mix plant using crushed aggregates of specific grading, premixed with bituminous binder @ 5.40% of Mix and filler transporting the Hot Mix to work site, laying with a hydrostatic paver finisher with senser control to the required grade level and alignment, rolling with smooth wheeld vibratory and tendem rollers to acheive the desired construction as per MORT&H specification clause No.507 complete in all respects. |
| 9 | Construction of Subgrade and Earthen Shoulders Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per SOR 2.25(a+c) |
| 10 | Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35, The finished surface to be level, uniform and free from streaks and holes. |
| 11 | Brick masonry work in cement mortar in substructure complete excepting pointing and plastering as per drawing and technical specifications Clauses 602,603,604, 1202 & 1204 |
| 12 | Plastering with cement mortar (1:4), 12 mm thick on brickwork in substructure as per technical specification Clauses 613.4 & 1204 |
| 13 | Plain/reinforced cement concrete in substructure complete as per drawings and technical specification Clauses 802,804,805,806,807,1202 and 1204 |
| 14 | Supply and fixing 2' 6\\" X 4'0\\" Size granite stone for Inauguration or information including all etc. complete As per senction SE. |
| 15 | Supply of informatory M.S. sign board 1.20x0.90mt. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 06, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 13, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 3 daysJul 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysJul 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender