Tender For Improvement Of Existing Park In Maidan Garhi Village At Ignou In Chhatarpur Constituency Ac-46.
Tender Value
19.66 Lakhs
Estimated cost
Bid Submission
06 Jul 2026
5 days left
EMD
39327
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Improvement Of Existing Park In Maidan Garhi Village At Ignou In Chhatarpur Constituency Ac-46.
BOQ
| Sl. No. | Item Description |
| 1 | Supply and Fixng of Tai Chi Spinners ARIHANT/KOMPAN/LANDSCAPE STRUCTURES/GRAND SLAM /KOOCHIE All products must tested and certified to meet EN16630 safety standards with GS test mark. The EN16630 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The GS mark-EN 16630 certificates must be in the name of the supplier by themselves or through their authorised dealers or contractors. The suppliers products must have been installed in at least 200 public parks across India the list of which to be submitted during the technical bid. Any five parks will be randomly selected by the tendering authority or a third party appointed by it to check and ascertain the product GS Marks, safety, quality and durability at site, the evaluation report to have photographs of the installed products taken at site showing the GS mark and the condition of the equipment, based upon which the tender shall be evaluated. The EN16630 & GS Mark certificates must be submitted during the technical bid and the same must reflect clearly on the notified certifying bodies websites as online verification is mandatory during technical bid. All products must clearly display the GS mark as has been issued in the EN16630 safety certificates. Upright structural posts of height 1.15 m is to be schedule HOT DIP Galvanized steel with a 114mm O.D. and 2.2mm (wall) thickness of the tubing. Circular Handrail of Dia 477 mm made with the pipe Dia of 32 mm fabricated from 32 O.D. galvanized steel pipes. The poles are welded on to a base plate made from steel with 114mm inner diameter. Bearings : Maintenance-free ball bearings. Equipment which have sway and moving parts, must have built in safety limiters that prevent unwanted and excessive movement, which can cause injuries. The limiters must be in accordance with EN16630 safety norms. Scope of delivery : 1 completely pre- assembled equipment modules. Maintenance : Maintain according to EN16630 and the maintenance guide. EQUIPMENT DIMENSIONS: 1.25 m x 1.09 m x 1.49 m |
| 2 | Supply and Fixng of Waist Twsiter: ARIHANT/KOMPAN/LANDSCAPE STRUCTURES/GRAND SLAM /KOOCHIE All products must tested and certified to meet EN16630 safety standards with GS test mark. The EN16630 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The GS mark-EN 16630 certificates must be in the name of the supplier by themselves or through their authorised dealers or contractors. The suppliers products must have been installed in at least 200 public parks across India the list of which to be submitted during the technical bid. Any five parks will be randomly selected by the tendering authority or a third party appointed by it to check and ascertain the product GS Marks, safety, quality and durability at site, the evaluation report to have photographs of the installed products taken at site showing the GS mark and the condition of the equipment, based upon which the tender shall be evaluated. The EN16630 & GS Mark certificates must be submitted during the technical bid and the same must reflect clearly on the notified certifying bodies websites as online verification is mandatory during technical bid. All products must clearly display the GS mark as has been issued in the EN16630 safety certificates. Upright structural posts of height 1.35 m is to be schedule HOT DIP Galvanized steel with a 114mm O.D. and 2.2mm (wall) thickness of the tubing. Circular Handrail Dia 42 mm fabricated from 42 O.D. galvanized steel pipes. The poles are welded on to a base plate made from steel with 114mm inner diameter. An Internal limiter prevents the equipment from moving uncontrollably.Bearings : Maintenance-free ball bearings. Equipment which have sway and moving parts, must have built in safety limiters that prevent unwanted and excessive movement, which can cause injuries. The limiters must be in accordance with EN16630 safety norms. Scope of delivery : 1 completely pre- assembled equipment modules. Maintenance : Maintain according to EN16630 and the maintenance guide.Equipment Dimensions: 1.44 m x 1.29 m x 1.35 m |
| 3 | Supply and Fixng of Health Walker: ARIHANT/KOMPAN/LANDSCAPE STRUCTURES/GRAND SLAM /KOOCHIE All products must tested and certified to meet EN16630 safety standards with GS test mark. The EN16630 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The GS mark-EN 16630 certificates must be in the name of the supplier by themselves or through their authorised dealers or contractors. The suppliers products must have been installed in at least 200 public parks across India the list of which to be submitted during the technical bid. Any five parks will be randomly selected by the tendering authority or a third party appointed by it to check and ascertain the product GS Marks, safety, quality and durability at site, the evaluation report to have photographs of the installed products taken at site showing the GS mark and the condition of the equipment, based upon which the tender shall be evaluated. The EN16630 & GS Mark certificates must be submitted during the technical bid and the same must reflect clearly on the notified certifying bodies websites as online verification is mandatory during technical bid. All products must clearly display the GS mark as has been issued in the EN16630 safety certificates. Upright structural posts of height 1.25 m is to be schedule HOT DIP Galvanized steel with a 114mm O.D. and 2.2mm (wall) thickness of the tubing. Two numbers of Foot Rest of size 361 mm x 161 mm are attached to the Standing Bars 957mm x 60 mm fabricated from 60 O.D. galvanized steel pipes. The poles are welded on to a base plate made from steel with 114mm inner diameter. An Internal limiter prevents the equipment from moving uncontrollably. Bearings : Maintenance-free ball bearings. Equipment which have sway and moving parts, must have built in safety limiters that prevent unwanted and excessive movement, which can cause injuries. The limiters must be in accordance with EN16630 safety norms. Scope of delivery : 1 completely pre- assembled equipment modules. Maintenance : Maintain according to EN16630 and the maintenance guide. EQUIPMENT DIMENSIONS: 1.18 m x 0.553 m x 1.25 m |
| 4 | Supply and Fixng of Squat Pushing: ARIHANT/KOMPAN/LANDSCAPE STRUCTURES/GRAND SLAM /KOOCHIE All products must tested and certified to meet EN16630 safety standards with GS test mark. The EN16630 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The GS mark-EN 16630 certificates must be in the name of the supplier by themselves or through their authorised dealers or contractors. The suppliers products must have been installed in at least 200 public parks across India the list of which to be submitted during the technical bid. Any five parks will be randomly selected by the tendering authority or a third party appointed by it to check and ascertain the product GS Marks, safety, quality and durability at site, the evaluation report to have photographs of the installed products taken at site showing the GS mark and the condition of the equipment, based upon which the tender shall be evaluated. The EN16630 & GS Mark certificates must be submitted during the technical bid and the same must reflect clearly on the notified certifying bodies websites as online verification is mandatory during technical bid. All products must clearly display the GS mark as has been issued in the EN16630 safety certificates. Vertical bars height of 1.70 m is to be schedule HOT DIP Galvanized steel with a 114mm O.D. and 2.2mm (wall) thickness of the tubing. L shaped bars of 960 mm x 600 mm carrying two seats of 0.34 m x 0.34 m fabricated from 40 O.D. galvanized steel pipes. The poles are welded on to a base plate made from steel with 114mm inner diameter. Bearings : Maintenance-free ball bearings. Equipment which have sway and moving parts, must have built in safety limiters that prevent unwanted and excessive movement, which can cause injuries. The limiters must be in accordance with EN16630 safety norms. Scope of delivery : 1 completely pre- assembled equipment modules. Maintenance : Maintain according to EN16630 and the maintenance guide.EQUIPMENT DIMENSIONS: 1.93 m x 0.56 m x 1.70 m |
| 5 | Supply and Fixng of Seated Chest Press: ARIHANT/KOMPAN/LANDSCAPE STRUCTURES/GRAND SLAM /KOOCHIE All products must tested and certified to meet EN16630 safety standards with GS test mark. The EN16630 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The GS mark-EN 16630 certificates must be in the name of the supplier by themselves or through their authorised dealers or contractors. The suppliers products must have been installed in at least 200 public parks across India the list of which to be submitted during the technical bid. Any five parks will be randomly selected by the tendering authority or a third party appointed by it to check and ascertain the product GS Marks, safety, quality and durability at site, the evaluation report to have photographs of the installed products taken at site showing the GS mark and the condition of the equipment, based upon which the tender shall be evaluated. The EN16630 & GS Mark certificates must be submitted during the technical bid and the same must reflect clearly on the notified certifying bodies websites as online verification is mandatory during technical bid. All products must clearly display the GS mark as has been issued in the EN16630 safety certificates. Upright structural posts of height 1.88 m is to be schedule HOT DIP Galvanized steel with a 114mm O.D. and 2.2mm (wall) thickness of the tubing. Two pair of U-Shaped Bars of 1.02 m and Dia 40 mm while the handles are placed at a spacing of 698 mm fabricated from 40 O.D. galvanized steel pipes. The poles are welded on to a base plate made from steel with 114mm inner diameter. Bearings : Maintenance-free ball bearings. Equipment which have sway and moving parts, must have built in safety limiters that prevent unwanted and excessive movement, which can cause injuries. The limiters must be in accordance with EN16630 safety norms. Scope of delivery : 1 completely pre- assembled equipment modules. Maintenance : Maintain according to EN16630 and the maintenance guide.EQUIPMENT DIMENSIONS: 1.82 m x 0.69 m x 1.88 m |
| 6 | Supply and Fixng of Pull Down Challenger: ARIHANT/KOMPAN/LANDSCAPE STRUCTURES/GRAND SLAM /KOOCHIE All products must tested and certified to meet EN16630 safety standards with GS test mark. The EN16630 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The GS mark-EN 16630 certificates must be in the name of the supplier by themselves or through their authorised dealers or contractors. The suppliers products must have been installed in at least 200 public parks across India the list of which to be submitted during the technical bid. Any five parks will be randomly selected by the tendering authority or a third party appointed by it to check and ascertain the product GS Marks, safety, quality and durability at site, the evaluation report to have photographs of the installed products taken at site showing the GS mark and the condition of the equipment, based upon which the tender shall be evaluated. The EN16630 & GS Mark certificates must be submitted during the technical bid and the same must reflect clearly on the notified certifying bodies websites as online verification is mandatory during technical bid. All products must clearly display the GS mark as has been issued in the EN16630 safety certificates. Upright structural posts of height 1.88 m is to be schedule HOT DIP Galvanized steel with a 114mm O.D. and 2.2mm (wall) thickness of the tubing. Two pair of U-Shaped Pull down Bars 806 mm x 700 mm and Dia 40 mm are spaced at 630 mm fabricated from 40 O.D. galvanized steel pipes. The poles are welded on to a base plate made from steel with 114mm inner diameter. Bearings : Maintenance-free ball bearings. Equipment which have sway and moving parts, must have built in safety limiters that prevent unwanted and excessive movement, which can cause injuries. The limiters must be in accordance with EN16630 safety norms. Scope of delivery : 1 completely pre- assembled equipment modules. Maintenance : Maintain according to EN16630 and the maintenance guide.EQUIPMENT DIMENSIONS: 2.30 m x 0.70 m x 1.88 m |
| 7 | Supply and Fixng of Bicycle: ARIHANT/KOMPAN/LANDSCAPE STRUCTURES/GRAND SLAM /KOOCHIE All products must tested and certified to meet EN16630 safety standards with GS test mark. The EN16630 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The GS mark-EN 16630 certificates must be in the name of the supplier by themselves or through their authorised dealers or contractors. The suppliers products must have been installed in at least 200 public parks across India the list of which to be submitted during the technical bid. Any five parks will be randomly selected by the tendering authority or a third party appointed by it to check and ascertain the product GS Marks, safety, quality and durability at site, the evaluation report to have photographs of the installed products taken at site showing the GS mark and the condition of the equipment, based upon which the tender shall be evaluated. The EN16630 & GS Mark certificates must be submitted during the technical bid and the same must reflect clearly on the notified certifying bodies websites as online verification is mandatory during technical bid. All products must clearly display the GS mark as has been issued in the EN16630 safety certificates. Upright structural posts of height 1.31 m is to be schedule HOT DIP Galvanized steel with a 60 mm O.D. and 2.2mm (wall) thickness of the tubing. Two numbers of Pedal of size 113mm x 40mm & Rotating Disc of Dia 380 mm fabricated from 40 O.D. galvanized steel pipes. The poles are welded on to a base plate made from steel with 114mm inner diameter. Welded. Bearings : Maintenance-free ball bearings. Equipment which have sway and moving parts, must have built in safety limiters that prevent unwanted and excessive movement, which can cause injuries. The limiters must be in accordance with EN16630 safety norms. Scope of delivery : 1 completely pre- assembled equipment modules. Maintenance : Maintain according to EN16630 and the maintenance guide.EQUIPMENT DIMENSIONS: 1.11m x 0.51 m x 1.31 m |
| 8 | Supply and Fixng of Rider: ARIHANT/KOMPAN/LANDSCAPE STRUCTURES/GRAND SLAM /KOOCHIE All products must tested and certified to meet EN16630 safety standards with GS test mark. The EN16630 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The GS mark-EN 16630 certificates must be in the name of the supplier by themselves or through their authorised dealers or contractors. The suppliers products must have been installed in at least 200 public parks across India the list of which to be submitted during the technical bid. Any five parks will be randomly selected by the tendering authority or a third party appointed by it to check and ascertain the product GS Marks, safety, quality and durability at site, the evaluation report to have photographs of the installed products taken at site showing the GS mark and the condition of the equipment, based upon which the tender shall be evaluated. The EN16630 & GS Mark certificates must be submitted during the technical bid and the same must reflect clearly on the notified certifying bodies websites as online verification is mandatory during technical bid. All products must clearly display the GS mark as has been issued in the EN16630 safety certificates. Upright structural posts of height 0.5 m is to be schedule HOT DIP Galvanized steel with a 114mm O.D. and 2.2mm (wall) thickness of the tubing. A single seat of size 330 mm x 250 mm fixed to the top of the vertical post and two Pedals & Bars of size 145 mm x 50 mm and Dia 38 mm fabricated from 40 O.D. galvanized steel pipes. The poles are welded on to a base plate made from steel with 114mm inner diameter. Bearings : Maintenance-free ball bearings. Equipment which have sway and moving parts, must have built in safety limiters that prevent unwanted and excessive movement, which can cause injuries. The limiters must be in accordance with EN16630 safety norms. Scope of delivery : 1 completely pre- assembled equipment modules. Maintenance : Maintain according to EN16630 and the maintenance guide.EQUIPMENT DIMENSIONS: 0.91 m x 0.65 m x 1.27 m |
| 9 | Supply and Fixng of Sit Up Station: ARIHANT/KOMPAN/LANDSCAPE STRUCTURES/GRAND SLAM /KOOCHIE All products must tested and certified to meet EN16630 safety standards with GS test mark. The EN16630 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The GS mark-EN 16630 certificates must be in the name of the supplier by themselves or through their authorised dealers or contractors. The suppliers products must have been installed in at least 200 public parks across India the list of which to be submitted during the technical bid. Any five parks will be randomly selected by the tendering authority or a third party appointed by it to check and ascertain the product GS Marks, safety, quality and durability at site, the evaluation report to have photographs of the installed products taken at site showing the GS mark and the condition of the equipment, based upon which the tender shall be evaluated. The EN16630 & GS Mark certificates must be submitted during the technical bid and the same must reflect clearly on the notified certifying bodies websites as online verification is mandatory during technical bid. All products must clearly display the GS mark as has been issued in the EN16630 safety certificates. Upright structural posts of height 0.63 m is to be schedule HOT DIP Galvanized steel with a 114mm O.D. and 2.2mm (wall) thickness of the tubing. Two J shaped Bars of 1.07 m and Dia 48 mm. The poles are welded on to a base plate made from steel with 114mm inner diameter. Bearings : Maintenance-free ball bearings. Equipment which have sway and moving parts, must have built in safety limiters that prevent unwanted and excessive movement, which can cause injuries. The limiters must be in accordance with EN16630 safety norms. Scope of delivery : 1 completely pre- assembled equipment modules. Maintenance : Maintain according to EN16630 and the maintenance guide.EQUIPMENT DIMENSIONS: 1.48 m x 1.21 m x 0.63 m |
| 10 | Supply and Fixng of Double Air Skier: ARIHANT/KOMPAN/LANDSCAPE STRUCTURES/GRAND SLAM /KOOCHIE All products must tested and certified to meet EN16630 safety standards with GS test mark. The EN16630 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The GS mark-EN 16630 certificates must be in the name of the supplier by themselves or through their authorised dealers or contractors. The suppliers products must have been installed in at least 200 public parks across India the list of which to be submitted during the technical bid. Any five parks will be randomly selected by the tendering authority or a third party appointed by it to check and ascertain the product GS Marks, safety, quality and durability at site, the evaluation report to have photographs of the installed products taken at site showing the GS mark and the condition of the equipment, based upon which the tender shall be evaluated. The EN16630 & GS Mark certificates must be submitted during the technical bid and the same must reflect clearly on the notified certifying bodies websites as online verification is mandatory during technical bid. All products must clearly display the GS mark as has been issued in the EN16630 safety certificates. Upright structural posts of height 1.25 m is to be schedule HOT DIP Galvanized steel with a 114mm O.D. and 2.2mm (wall) thickness of the tubing. Foot rest of size 365 mm x 164 mm and Standing Bars of length 1640 mm x 40 mm fabricated from 40 O.D. galvanized steel pipes. Lower part of Support Handrails of size 0.8 m high and Dia 47 mm and Upper part of Support Handrails of size 0.51 m high and Dia 32 mm fabricated from 47 mm O.D. and 32 mm O.D. The poles are welded on to a base plate made from steel with 114mm inner diameter. An Internal limiter prevents the equipment from moving uncontrollably. Bearings : Maintenance-free sealed ball bearings. Equipment which have sway and moving parts, must have built in safety limiters that prevent unwanted and excessive movement, which can cause injuries. The limiters must be in accordance with EN16630 safety norms. Scope of delivery : 1 completely pre- assembled equipment modules. Maintenance : Maintain according to EN16630 and the maintenance guide. EQUIPMENT DIMENSIONS: 1.61 m x 0.50 m x 1.50 m |
| 11 | Supply and Fixng of Leg Exension: ARIHANT/KOMPAN/LANDSCAPE STRUCTURES/GRAND SLAM /KOOCHIE All products must tested and certified to meet EN16630 safety standards with GS test mark. The EN16630 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The GS mark-EN 16630 certificates must be in the name of the supplier by themselves or through their authorised dealers or contractors. The suppliers products must have been installed in at least 200 public parks across India the list of which to be submitted during the technical bid. Any five parks will be randomly selected by the tendering authority or a third party appointed by it to check and ascertain the product GS Marks, safety, quality and durability at site, the evaluation report to have photographs of the installed products taken at site showing the GS mark and the condition of the equipment, based upon which the tender shall be evaluated. The EN16630 & GS Mark certificates must be submitted during the technical bid and the same must reflect clearly on the notified certifying bodies websites as online verification is mandatory during technical bid. All products must clearly display the GS mark as has been issued in the EN16630 safety certificates. Upright structural posts of height 0.56 m is to be schedule HOT DIP Galvanized steel with a 114mm O.D. and 2.2mm (wall) thickness of the tubing. Handrail rails of Dia 38 m and 2 nos of Leg pedals of 0.19 m shall be an all-robotic welded unit, fabricated from galvanized steel pipes. The poles are welded on to a base plate made from steel with 114mm inner diameter. An Internal limiter prevents the equipment from moving uncontrollably. Bearings : Maintenance-free ball bearings. Equipment which have sway and moving parts, must have built in safety limiters that prevent unwanted and excessive movement, which can cause injuries. The limiters must be in accordance with EN16630 safety norms. Scope of delivery : 1 completely pre- assembled equipment modules. Maintenance : Maintain according to EN16630 and the maintenance guide. EQUIPMENT DIMENSIONS: 0.71 m x 0.62 m x 0.97 m |
| 12 | Providing and fixing of TRIPLE WAVE SLIDE 2.1 MTR. make of Arihant. The amazing triple wave slide is made up of FRP. At a time three children can enjoy sliding. The trapezium platform of the slide is made up of the FRP. The vertical platform support pipes are made up of 80 NB powder coated Gl pipes. The railing is made in LLDPE in rotational molding process. The slide entry is made up of 20 NB powder coated Gl pipes. The slide entry is mounted on 80 NB and 80 x 20 NB nylon clamp. The ladder frame is made in 20 NB and 25 NB powder coated Gl pipes. The triangular steps are made in 16 SWG GI sheets. All complete as per the direction of engineer in charge or as per & design given by approved drawing manufacturer. |
| 13 | Providing and fixing of Double Wave Slide make of Arihant. The amazing double wave slide is made up of FRP. At a time two children can enjoy sliding. The dual platform of the slide is made up of the FRP. The vertical platform support pipes are made up of 80 NB powder coated Gl pipes. The railing is made in LLDPE in rotational molding process. The slide entry is made up of 20 NB powder coated Gl pipes. The slide entry is mounted on 80 NB and 80 x 20 NB nylon clamp. The ladder frame is made in 20 NB and 25 NB powder coated Gl pipes. The triangular steps are made in 16 SWG GI sheets. All complete as per the direction of engineer in charge or as per approved drawing & design given by manufacturer. |
| 14 | Supply & Fixing of A Swing:\\" The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. \\"As per NIUA guidelines All components designed and manufactured to meet with EN 1176 safety standards. The EN 1176 certificates must be issued by areputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. “A” Shapedsupport posts of height 2.1 m are to be schedule Galvanized steel with a 80mm OD {Outer Diameter}.Toprail of length 2.58 m and Dia 76 mm shall be an all-robotic welded unit, fabricated from O.D.galvanized steel pipes. Flat Swing seat of size 440 mm x 150 mm x 30 mm, Bucket Swing seat of size Dia 325 mm and height 245 mm. Bolts, nuts, screws, washers and etc used for assembly shall be stainless steel 304 grade and shall be of tamper resistant stainless steel. Exposed hardware shall be covered with safety caps as a safety. All joints are Robotic welded. PLAY EQUIPMENT DIMENSIONS: 2.5 m x 1.5 m x 2.1 m. |
| 15 | Supply & Fixing of Four Seater See Saw: \\" The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. \\"As per NIUA guidelines All products must be tested and certified to meet EN 1176 safety standards. The EN 1176 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only.The See Saw consists of 2 poles of Dia 114mm and thickness of 2.5mm which balances the horizontal rod at the center which is of size 1614 mm length and Dia114mm.It consists of 4 seats which is made of LLDPE virgin plastic of size 364 mm X 250 mm X 180 mm. Each seat consists of a safety stand in the horizontal balance bar which is of 500 mm X 462 mm and a thickness of Dia 32 mm.Specialized connectors such as clamps and couplings are to be cast from aluminum which is pretreated, and cured, with a baked on powder coat finish.Bolts, nuts, screws, washers and etc used for assembly shall be stainless steel 304 grade and shall be of tamper resistant stainless steel. Exposed hardware shall be covered with safety caps.All joints are Robotic welded. PLAY EQUIPMENT DIMENSIONS: 2.60 m x 0.5 m x 0.7 m |
| 16 | Supply and Fixing of Merry Go Round: \\" The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. \\"As per NIUA guidelines All components designed and manufactured to meet with EN 1176 safety standards. The EN 1176 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The Centre post of height 815 mm are to be schedule Galvanized steel with a 48 mm OD {Outer Diameter}. Round Deck of Dia 1.21 shall be an all-ROBOTIC welded assembly fabricated from perforated solid punched steel. Deck perimeter is precision pre punched for attachments. Decks are pre pressed, punched, and welded, powder coated to 2.2mm thickness or vinyl plastic coated to a thickness of 4mm. Handrail of size 815 mm x 474 mm and Dia 32 mm shall be an all-patent welded unit, fabricated from 32 O.D. galvanized steel pipes. Bolts, nuts, screws, washers and etc used for assembly shall be stainless steel 304 grade and shall be of tamper resistant stainless steel. Exposed hardware shall be covered with safety caps as a safety. All joints are Robotice welded. PLAY EQUIPMENT DIMENSIONS: Dia - 1.21 m |
| 17 | Supply and Fixing of N-Swing: \\" The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. \\" As per NIUA guidelines All products must be tested and certified to meet EN 1176 safety standards. The EN 1176 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. These EN 1176 certificates must be clearly displayed on the notified certifying bodies websites as online verification is mandatory. Inverted “U” Shaped support posts of height 2.1 m are to be schedule Galvanized steel with a 80mm OD {Outer Diameter}. Toprail of length 2.5 m and Dia 89 mm. Flat Swings seat of size 430 mm x 180 mm x 50 mm. Bolts, nuts, screws, washers and etc used for assembly shall be stainless steel 304 grade and shall be of tamper resistant stainless steel. Exposed hardware shall be covered with safety caps as a safety. All joints are Robotic welded. PLAY EQUIPMENT DIMENSIONS: 2.63 x 1.26 x 2.1 m |
| 18 | Supply & Fixing of Merry Go Hip Hop: \\" The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. \\" As per NIUA guidelines All components designed and manufactured to meet with EN 1176 safety standards. The EN 1176 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only.It consists of 4 Spring like suspension ring of Dia 150mm and thickness of 2.5mm which balances the 4 Interconnecting rod at the center which is of size 1200 mm length and Dia 114 mm. It consists of 4 seats which is made of LLDPE virgin plastic of size 364 mm X 250 mm X 180 mm. Each seat consists of a safety stand in the horizontal balance bar which is of 500 mm X 462 mm and a thickness of Dia 32 mm. Bolts, nuts, screws, washers and etc used for assembly shall be stainless steel 304 grade and shall be of tamper resistant stainless steel. Exposed hardware shall be covered with safety caps as a safety. All joints are Robotic welded. PLAY EQUIPMENT DIMENSIONS: Dia 1.2 m |
| 19 | Supply & Fixing of Monkey Trail: \\" The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. \\" As per NIUA guidelines. All components designed and manufactured to meet with EN 1176 safety standards. The EN 1176 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. Upright structural posts of height 2.1 m are to be schedule Galvanized steel with a 38mm OD {Outer Diameter}. Curved structure of size 2.70 m x 1.38 and Dia 38 mm shall be an all-robotic welded unit, fabricated from 32 O.D. galvanized steel pipes. Specialized connectors such as clamps and couplings are to be cast from aluminum. Bolts, nuts, screws, washers and etc used for assembly shall be stainless steel 304 grade and shall be of tamper resistant stainless steel. Exposed hardware shall be covered with safety caps as a safety. All joints are Robotic welded. PLAY EQUIPMENT DIMENSIONS: 6.32 x 2.1 x 2.1 m |
| 20 | Supplying & placing in position of SFRC precast reinforced cement concrete bench (Hand Rest Bench), each bench consists of two nos. L- Shape base support in cement colour (thickness – 80-mm. Back height 890 mm . Front height – 450 mm. and Base width 690 mm). and 1 no., reinforced cement plank in red co lour of size 1500 mm x 400mm x 50 mm and 1 no. of rein forced concrete plank in red co lour of size 1500mm x 425 mm x 50mm with overall dimensions : Seating length of the Bench – 1500 mm, seating height of the Bench - 450mm, Total height of the bench – 890 mm manufactured by using M-30 grade of concrete using vibro compaction process, reinforced suitably to promote long use and to prevent damaged during handing, transportation and erection. All parts are to be jointed together with galvanized nuts and bolts of suitable size and all bolts are to be sealed after assembly. The bench top and back planks are to be treated with special anti- corrosive water proof coating as to make surfaces glossy and water proof. |
| 21 | Providing & Fixing of 2 mm thick 0.30x0.15 Mt. Stainless steel plates on benches with name of Hon'ble area MLA and tighted with aluminium riviting on existing benches Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysJul 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 days