Bids Are invited for Pan Centrifugal And Etp Fabrication Works

Sharing tender

Bids Are invited for Pan Centrifugal And Etp Fabrication Works Cut And Remove The Weak Corroded Footrest Of The Service Pump Make A New One From The Provided Plate And Conduct A Trial. - Pan Centrifugal And Etp , Removing The Pan Floor And Damaged Weak Vapor Pipes 1100 Mm In Diameter Per Meter And Installing A New One Using The Provided Plate And Testing It. - Pan Centrifugal And Etp , Removing The Pan Floor And Damaged Weak Vapor Pipes 900 Mm In Diameter Per Meter And Installing A New One Using The Provided Plate And Testing It. - Pan Centrifugal And Etp , Manufacture And Install Suction Pipes For Injection And Cooling Tower Spray Pumps According To The Instructions. - Pan Centrifugal And Etp , Remove The Worn Out Shell Plate Of The Pans And Replace It With A 10 12 Mm Ms Plate And Conduct A Trial. - Pan Centrifugal And Etp , Remove The Umbrella On The Pan And Install A New One Using The Provided 6 8 Mm Plate And Conduct A Trial. - Pan Centrifugal And Etp , Cutting And Removing The Neck Cone Ring Portion Of The Pan And Replacing It With The Provided 10 12 Mm Ms Plate By Bending It Welding It Inside And Out And Filling It With Water For A Trial. - Pan Centrifugal And Etp , Removing The Old Neck Angles Channels From The Pan Shell And Roof And Stiffening Them With The Provided New Angles Channels. - Pan Centrifugal And Etp , Cutting Out The Worn Spots Of The Pan Umbrella And Strengthening It With A New Channel And Angle. - Pan Centrifugal And Etp , Patching The Old And Worn Plates At Various Locations With The Provided New Plates. - Pan Centrifugal And Etp , Removing The Corroded Bottom And Top Platforms Of The Pan And Making New Ones From The Provided Plates And Strengthening The Associated Structure. - Pan Centrifugal And Etp , Installing A 20 22 Manhole With Blind At The Pan Floor. - Pan Centrifugal And Etp , Refurbish The Corroded Side Plates Of The Molasses Conditioner Locatedby Bending Them With The New Plates Provided And Replace The Corroded Bottom Angle With The New Plates Provided - Pan Centrifugal And Etp , Repair The Neck And Damaged Shaft And Arm Of The Crystallizer. - Pan Centrifugal And Etp , Remove The Worm Wheel Of The Crystallizer Make A Bed For The New Planetary Gear Box Provided Adjust The Shaft And Give A Satisfactory Trial. - Pan Centrifugal And Etp , Strengthening The Weak Side Covers And Weak Cells Of The Crystallizers By Using The Provided Channel And Angle Supports. - Pan Centrifugal And Etp , Cutting And Removing The Corroded Plates Of The Pan Floor Installed Syrup Malt A Light A Heavy B Heavy C Light C1 Heavy Tanks And Installing Them From The Provided Plate Of 6 8 Mm. - Pan Centrifugal And Etp , Removing The Neck And Damaged Parts Of The Vacuum Crystallizer Shell And Installing A New One From The Provided 10 12 Mm Plate And Welding The Relevant Cut Connections And Nipples - Pan Centrifugal And Etp , Dismantle Fabricate Erect A 900 Mm Band And Give A Satisfactory Trial - Pan Centrifugal And Etp , Dismantle Fabricate Erect An 1100 Mm Band And Give A Satisfactory Trial. - Pan Centrifugal And Etp , Cutting Off The Taper Angle On The Weak Caladria Of The Pan And Fitting The Provided New 10 12 Mm Plate By Bending It And Giving A Satisfactory Trial. - Pan Centrifugal And Etp , Cutting Off The Weak Sloping Bottom Half And Side Plates Of The Air Cooled Crystallizer And Fitting The Provided New 6 8 Mm Plate By Bending It And Giving A Satisfactory Trial. - Pan Centrifugal And Etp , Removing The Weak Corroded Steam Jacket Of The Calandria Of The Pan And Installing The Provided Plate 8 10 Mm By Bending It And Testing The Hydrolink And Giving A Satisfactory Trial. - Pan Centrifugal And Etp , A Dismantling Old Columns Beam Channels Etc B Manufacturing And Installing New Columns Beam Channels Etc. - Pan Centrifugal And Etp , Removing The Old Corroded Platform And Replacing It With A New One - Pan Centrifugal And Etp , Installing 16 Inch 18 Inch Manholes With Blinds. - Pan Centrifugal And Etp , Constructing A Bed For The Pump Fitting The Pump And Motor And Conducting A Trial Run Of Up To 20 Hp. - Pan Centrifugal And Etp , Dismantling Fabricating And Erecting Weak Corroded Pipe Lines Up To 12 And Providing Satisfactory Leak Proof Trials. - Pan Centrifugal And Etp , Dismantling Fabricating And Erecting Weak Corroded Tees Up To 12 And Providing Satisfactory Leak Proof Trials. - Pan Centrifugal And Etp , Dismantling Fabricating And Erecting Weak Corroded Nipples Up To 12 And Providing Satisfactory Leak Proof Trials. - Pan Centrifugal And Etp , Dismantling Fabricating And Erecting A Weak Throated Cross Member Up To 12 And Providing Satisfactory Leak Proof Trials. - Pan Centrifugal And Etp , Dismantling Fabricating And Erecting A Weak Throated Band Up To 12 And Providing Satisfactory Leak Proof Trials. - Pan Centrifugal And Etp , Dismantling Fabricating And Erecting A Weak Throated Flange Up To 12 And Providing Satisfactory Leak Proof Trials. - Pan Centrifugal And Etp , Dismantling Fabricating And Erecting A Weak Sloping Reducer Up To 12 And Providing A Satisfactory Leak Proof Trial. - Pan Centrifugal And Etp , Cutting And Removing The Weak Corroded Ducting Plates Of The Sugar Hopper And Making New Ducting Plates From The Provided 3 Mm Plates And Installing Them In Their Original Places - Pan Centrifugal And Etp , Replace The Broken Part Of The Rody Melter Arm And Give A Satisfactory Trial. - Pan Centrifugal And Etp , Make The Hopper Trough Using The Provided Plate Strengthen It With An Angle And Give A Satisfactory Trial - Pan Centrifugal And Etp , Removing The Faulty Trajet Heater On The Continuous Machines Installing A New One And Conducting A Satisfactory Trial. - Pan Centrifugal And Etp , The Hopper 1.5 M X 1.5 M Trough Was Renovated By Riveting A 5 Mm Plate With A 10 Mm Plate And Given A Trial By Installing A Connecting Rod. - Pan Centrifugal And Etp , The Cover Of The Conti Machines Was Renovated Using An 8 10 Mm Plate Installed In Place And Given A Satisfactory Trial By Welding. - Pan Centrifugal And Etp , Replace The Side Plates Of The A B Heavy Run Off Tank With New 6 8 Mm Plates And Replace The Bottom Plate With A New 10 Mm Plate Make Connections Etc. And Give A Satisfactory Trial. - Pan Centrifugal And Etp , Replacing The Weak Side Plate Bottom Of The Magma Mixer Under Continuous Machines With A New 8 10 Mm Plate And Giving A Satisfactory Trial. - Pan Centrifugal And Etp , To Dismantle Old Weak Round And Square Tanks Vessels Of A Light C Light B Heavy And Prepare Them From The Provided 8 10 Mm Plate And Give Satisfactory Trials By Welding The Cut Connections Etc. - Pan Centrifugal And Etp , A Dismantling Old Columns Beam Channels Etc. B Manufacturing And Installing New Columns Beam Channels Etc. - Pan Centrifugal And Etp , Removing The Old Corroded Platform And Replacing It With A New One. - Pan Centrifugal And Etp , Installing 16 Inch 18 Inch Manholes With Blinds. - Pan Centrifugal And Etp , Constructing A Bed For The Pump Fitting The Pump And Motor And Conducting A Trial Run Of Up To 20 Hp. - Pan Centrifugal And Etp Total Quantity : 1752