Tender For Motor Maintenance At W.No.11 To W.No.21 In Vellakovil Municipality
Tender Value
5 Lakhs
Estimated cost
Bid Submission
07 Jul 2026
3 days left
EMD
5000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Tiruppur → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Motor Maintenance At W.No.11 To W.No.21 In Vellakovil Municipality
BOQ
| Sl. No. | Item Description |
| 1 | Air Compressor Motor |
| 2 | Motor Rewinding charges including cost of necessary winding materials and all labour charges etc., complete including cost of copper coil (Less the cost of old burnt copper coil)(Less the Cost of Old Materials) 5 HP |
| 3 | Motor Rewinding charges including cost of necessary winding materials and all labour charges etc., complete including cost of copper coil (Less the cost of old burnt copper coil)(Less the Cost of Old Materials) 7.5 HP |
| 4 | Labour charges for the Rectification of Loose connect in the Motor winding and wiring varnishing the winding including cost of materials 5 HP |
| 5 | Labour charges for the Rectification of Loose connect in the Motor winding and wiring varnishing the winding including cost of materials 7.5 HP |
| 6 | Labour charges for Removing Air Pipe & water line rectifying the Leakage of blockingd in the pipe line and Re-erection of 5 HP |
| 7 | Labour charges for Removing Air Pipe & water line rectifying the Leakage of blockingd in the pipe line and Re-erection of 7.5 HP |
| 8 | Labour charges for Cylinder Boring work 5 HP |
| 9 | Labour charges for Cylinder Boring work 7.5 HP |
| 10 | Labour Charge for Dismandling of Air Compressor with Motor, Removing of Damaged parts and new sparts fixing including conveyance lathe works and all labour charges etc complete.., |
| 11 | Supply and fixing of following Air Compressor Motor Materials including cost and conveyance and all Labour charges etc complete..,(Less the Cost of Old Materials) |
| 12 | 5 HP Web assemble housing |
| 13 | 7.5 HP Web assemble housing |
| 14 | 5 HP Motor Bearing Set |
| 15 | 7.5 HP Motor Bearing Set |
| 16 | 5 HP Piston connecting shaft |
| 17 | 7.5 HP Piston connecting shaft |
| 18 | 5 HP Compressor pully |
| 19 | 7.5 HP Compressor pully |
| 20 | 5 HP Grease cup |
| 21 | 7.5 HP Grease cup |
| 22 | 5 HP Cooling Fan Aluminium |
| 23 | 7.5 HP Cooling Fan Aluminium |
| 24 | 5 HP V-Belt |
| 25 | 7.5 HP V-Belt |
| 26 | 5 HP Crank Shaft |
| 27 | 7.5 HP Crank Shaft |
| 28 | 5 HP Connecting rod |
| 29 | 7.5 HP Connecting rod |
| 30 | 5 HP Cylinder sleeve fitting |
| 31 | 7.5 HP Cylinder sleeve fitting |
| 32 | 5 HP Compressor Bearing Set |
| 33 | 7.5 HP Compressor Bearing Set |
| 34 | 5 HP Piston |
| 35 | 7.5 HP Piston |
| 36 | 5 HP Piston Ring Set |
| 37 | 7.5 HP Piston Ring Set |
| 38 | 5 HP Head plate |
| 39 | 7.5 HP Head plate |
| 40 | 5 HP Oil Seal |
| 41 | 7.5 HP Oil Seal |
| 42 | 5 HP Packing |
| 43 | 7.5 HP Packing |
| 44 | 5 HP Oil Class |
| 45 | 7.5 HP Oil Class |
| 46 | 5 HP Brass Bush |
| 47 | 7.5 HP Brass Bush |
| 48 | 5 HP Cylinder |
| 49 | 7.5 HP Cylinder |
| 50 | 5 HP Pully shaft pin |
| 51 | 7.5 HP Pully shaft pin |
| 52 | 5 HP Distance bush |
| 53 | 7.5 HP Distance bush |
| 54 | 5 HP Fly cover |
| 55 | 7.5 HP Fly cover |
| 56 | 5 HP Free Cover |
| 57 | 7.5 HP Free Cover |
| 58 | 5 HP Bearing Washer |
| 59 | 7.5 HP Bearing Washer |
| 60 | 5 HP Tipper |
| 61 | 7.5 HP Tipper |
| 62 | 5 HP Cutter Pin |
| 63 | 7.5 HP Cutter Pin |
| 64 | 5 HP End disk |
| 65 | 7.5 HP End disk |
| 66 | 5 HP Preather |
| 67 | 7.5 HP Preather |
| 68 | 5 HP Cylinder head |
| 69 | 7.5 HP Cylinder head |
| 70 | 5 HP Cylinder plate |
| 71 | 7.5 HP Cylinder plate |
| 72 | 5 HP Air cooler union |
| 73 | 7.5 HP Air cooler union |
| 74 | 5 HP Air cooler |
| 75 | 7.5 HP Air cooler |
| 76 | 5 HP Air Cock |
| 77 | 7.5 HP Air Cock |
| 78 | 5 HP Air Cock Nipple |
| 79 | 7.5 HP Air Cock Nipple |
| 80 | 5 HP Air filter |
| 81 | 7.5 HP Air filter |
| 82 | 5 HP Blade |
| 83 | 7.5 HP Blade |
| 84 | II. Monoblock |
| 85 | Dismandling the Pump set for checking in ther open well(Less the Cost of Old Materials) 5 HP |
| 86 | Dismandling the Pump set for checking in ther open well(Less the Cost of Old Materials) 7.5 HP |
| 87 | Motor Rewinding coil charges with necessary insulation varnishing etc., complete including cost of enamled copper coil (Less the cost of burnt copper coil)(Less the Cost of Old Materials) 5 HP |
| 88 | Motor Rewinding coil charges with necessary insulation varnishing etc., complete including cost of enamled copper coil (Less the cost of burnt copper coil)(Less the Cost of Old Materials) 7.5 HP |
| 89 | Labour charges for the rect loose contacks in the motor winding and wiring retapping and varnishing the winding including cost of materials 5 HP |
| 90 | Labour charges for the rect loose contacks in the motor winding and wiring retapping and varnishing the winding including cost of materials 7.5 HP |
| 91 | Labour charges for removing suction pipes, rectifying leakage in foot valve an refitting 5 HP |
| 92 | Labour charges for removing suction pipes, rectifying leakage in foot valve an refitting 7.5 HP |
| 93 | Labour charges for Reconditioning the Pump Shaft 5 HP |
| 94 | Labour charges for Reconditioning the Pump Shaft 7.5 HP |
| 95 | Supply and fixing of following Monoblock Motor Materials including cost and conveyance and all Labour charges etc complete..,(Less the Cost of Old Materials) |
| 96 | 5 HP Motor Bearing Set |
| 97 | 7.5 HP Motor Bearing Set |
| 98 | 5 HP Pump Packing |
| 99 | 7.5 HP Pump Packing |
| 100 | 5 HP Pump Impeller |
| 101 | 7.5 HP Pump Impeller |
| 102 | 5 HP Pump Shaft Sleeves (G.M.) |
| 103 | 7.5 HP Pump Shaft Sleeves (G.M.) |
| 104 | 5 HP Oil Seal |
| 105 | 7.5 HP Oil Seal |
| 106 | 5 HP Motor Cooling fan (Aluminium) |
| 107 | 7.5 HP Motor Cooling fan (Aluminium) |
| 108 | 5 HP Bearing Cup |
| 109 | 7.5 HP Bearing Cup |
| 110 | 5 HP Rotor |
| 111 | 7.5 HP Rotor |
| 112 | 5 HP Rotor Winding charges |
| 113 | 7.5 HP Rotor Winding charges |
| 114 | III. Borewell Sub Mercible |
| 115 | Removing and Reerection of Pump set from the well and dismanding for checking(Less the Cost of Old Materials) 1.5 HP |
| 116 | Removing and Reerection of Pump set from the well and dismanding for checking(Less the Cost of Old Materials) 5 HP |
| 117 | Removing and Reerection of Pump set from the well and dismanding for checking(Less the Cost of Old Materials) 7.5 HP |
| 118 | Motor Coil Rewinding charges with necessary Insulation varnishing etc., complete including cost of enameled copper wire (Less the cost of burnt copper coil)(Less the Cost of Old Materials) 1.5 HP |
| 119 | Motor Coil Rewinding charges with necessary Insulation varnishing etc., complete including cost of enameled copper wire (Less the cost of burnt copper coil)(Less the Cost of Old Materials) 5 HP |
| 120 | Motor Coil Rewinding charges with necessary Insulation varnishing etc., complete including cost of enameled copper wire (Less the cost of burnt copper coil)(Less the Cost of Old Materials) 7.5 HP |
| 121 | Labour charges for the Rectification of Loose contacts in the Motor winding and wiring retapping and varnishing the winding including cost of materials 1.5 HP |
| 122 | Labour charges for the Rectification of Loose contacts in the Motor winding and wiring retapping and varnishing the winding including cost of materials 5 HP |
| 123 | Labour charges for the Rectification of Loose contacts in the Motor winding and wiring retapping and varnishing the winding including cost of materials 7.5 HP |
| 124 | Labour charges for re-conditioning the Pump Shaft 1.5 HP |
| 125 | Labour charges for re-conditioning the Pump Shaft 5 HP |
| 126 | Labour charges for re-conditioning the Pump Shaft 7.5 HP |
| 127 | Supply and fixing of following Submersible Motor Materials including cost and conveyance and all Labour charges etc complete..,(Less the Cost of Old Materials) |
| 128 | 1.5 HP Motor thrust Bearing unit 1 Set |
| 129 | 5 HP Motor thrust Bearing unit 1 Set |
| 130 | 7.5 HP Motor thrust Bearing unit 1 Set |
| 131 | 1.5 HP Motor Housing Bush |
| 132 | 5 HP Motor Housing Bush |
| 133 | 7.5 HP Motor Housing Bush |
| 134 | 1.5 HP Pump Bush |
| 135 | 5 HP Pump Bush |
| 136 | 7.5 HP Pump Bush |
| 137 | 1.5 HP SS Pump Impeller |
| 138 | 5 HP SS Pump Impeller |
| 139 | 7.5 HP SS Pump Impeller |
| 140 | 1.5 HP Pump Defusser |
| 141 | 5 HP Pump Defusser |
| 142 | 7.5 HP Pump Defusser |
| 143 | 1.5 HP Non-Return Valve |
| 144 | 5 HP Non-Return Valve |
| 145 | 7.5 HP Non-Return Valve |
| 146 | 1.5 HP CI Pump Bowl |
| 147 | 5 HP CI Pump Bowl |
| 148 | 7.5 HP CI Pump Bowl |
| 149 | 1.5 HP Motor Shaft |
| 150 | 5 HP Motor Shaft |
| 151 | 7.5 HP Motor Shaft |
| 152 | 1.5 HP Rotor |
| 153 | 5 HP Rotor |
| 154 | 7.5 HP Rotor |
| 155 | 1.5 HP Motor Cover (Cashing) |
| 156 | 5 HP Motor Cover (Cashing) |
| 157 | 7.5 HP Motor Cover (Cashing) |
| 158 | 1.5 HP S.S. Bolt and Nut |
| 159 | 5 HP S.S. Bolt and Nut |
| 160 | 7.5 HP S.S. Bolt and Nut |
| 161 | 1.5 HP Rubber \\"O\\" Ring |
| 162 | 5 HP Rubber \\"O\\" Ring |
| 163 | 7.5 HP Rubber \\"O\\" Ring |
| 164 | 1.5 HP Pump Cashing |
| 165 | 5 HP Pump Cashing |
| 166 | 7.5 HP Pump Cashing |
| 167 | 1.5 HP Bowl |
| 168 | 5 HP Bowl |
| 169 | 7.5 HP Bowl |
| 170 | 1.5 HP Back Cover |
| 171 | 5 HP Back Cover |
| 172 | 7.5 HP Back Cover |
| 173 | 1.5 HP 6\\" Circlip |
| 174 | 5 HP 6\\" Circlip |
| 175 | 7.5 HP 6\\" Circlip |
| 176 | 1.5 HP SS Bolt nut |
| 177 | 5 HP SS Bolt nut |
| 178 | 7.5 HP SS Bolt nut |
| 179 | 1.5 HP Pump Shaft Cover |
| 180 | 5 HP Pump Shaft Cover |
| 181 | 7.5 HP Pump Shaft Cover |
| 182 | 1.5 HP Pump Buttom Cover |
| 183 | 5 HP Pump Buttom Cover |
| 184 | 7.5 HP Pump Buttom Cover |
| 185 | 1.5 HP Shaft Union bush |
| 186 | 5 HP Shaft Union bush |
| 187 | 7.5 HP Shaft Union bush |
| 188 | IV.Open Submersible 5HP |
| 189 | Motor Rewinding charges including cost of necessary winding materials and all labour charges etc., complete including cost of copper coil (Less the cost of old burnt copper coil)(Less the Cost of Old Materials) |
| 190 | Supply and fixing of following 5Hp Openwell Submersible Motor Materials including cost and conveyance and all Labour charges etc complete..,(Less the Cost of Old Materials) |
| 191 | Motor brass bush |
| 192 | Motor trust bearing |
| 193 | CI Impiller |
| 194 | Oil Seel |
| 195 | Bruss nut |
| 196 | V.DOL Starter |
| 197 | Labour Charges for Checking the wirinig diagram complete and relay setting |
| 198 | Labour charges for Replacement of Damaged Spares and all labour charges etc complete.., |
| 199 | Supply and fixing of following DOL Starter Materials including cost and conveyance and all Labour charges etc complete..,(Less the Cost of Old Materials) |
| 200 | L & T Starter Relay (16A, 440V) |
| 201 | L & T - Kit - Contactor (16A, 440V) |
| 202 | Ammeter |
| 203 | Volt Meter |
| 204 | Indicator |
| 205 | On - Off - Button |
| 206 | 9 Culter Hammer Relay |
| 207 | Cutler Hammer Kit Set |
| 208 | 120 / 100 - Capactor |
| 209 | Capactor |
| 210 | Contact Point |
| 211 | Novoit Coil |
| 212 | Delta - Timer |
| 213 | Preventer |
| 214 | Panel Box |
| 215 | Supply and Delivery of DOL Starter with Single phasing preventor with ammeter and sutable panel board including all cost of conveyance charges etc complete (TWAD SOR 2025-26, Pg No.135, Unique Code WD-M1921) |
| 216 | Supply and fixing of 32A TPN metal clad switch on suitable angle iron frame work with MS cable entry boxes with PWD earthing (Electrical SOR 2025-26, Pg No.61 SD 147) |
| 217 | Supply and fixing of 62A TPN metal clad switch on suitable angle iron frame work with MS cable entry boxes with PWD earthing (Electrical SOR 2025-26, Pg No.62 SD 149) |
| 218 | Supply and fixing of 32 Amps fuse unit including all cost and Conveyance of materials and labour charges etc complete as per std specification |
| 219 | Supply and run of 2 of 1.5sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade on 7/20 GI bearer wire for service connection mains (Electrical SOR 2025-26, Pg No.32 SD 64) |
| 220 | Supply and run of 4 of 4 sqmm (56/0.3) PVC insulated Single core unsheathed Cu.Conductor of 1100 v grade on 7/20 GI bearer wire for service connection mains (Electrical SOR 2025-26, Pg No.34 SD 67) |
| 221 | Supply of 20mm dia flex HDPE PIPES FOR SUB-MERSIBLE PUMP IN BOREWELL Class-5 (1 MPa or 10 kg./cm2 pressure) suitable for air compressure motor with water line including cost and conveyance of pipe to the site etc complete as per std spn (PWD SOR 2025-26, Pg No.168, Unique Code: M-1054) |
| 222 | Labour Charges for removing and refixing of Borewell Hdpe pipe including cost of borewell hdpe pipe removing and refixing charges for crane charges and testing the pipe line and trail run. including all cost of fixing materials and cost of conveyance charges etc,.. |
| 223 | Supply and Fixing of 2.5 Sq.mm PVC INSULATED AND SHEATHED 3 CORE FLAT TYPE COPPER CABLE Including Cost and conveyance charges, loading and unloading charges etc complete.., (TWAD 2025-26 Pg No.140, Unique Code WD-M1974) |
| 224 | Supply and Fixing of 4 Sq.mm PVC INSULATED AND SHEATHED 3 CORE FLAT TYPE COPPER CABLE Including Cost and conveyance charges, loading and unloading charges etc complete.., (TWAD 2025-26 Pg No.140, Unique Code WD-M1975) |
| 225 | Goods and Service Tax (GST - 18%) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysJul 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender