Tender For Repair And Renovation Of The Room At South East Corner Near By The Sales Counter (At Right Position Of Partition Wall) Ground Floor Of Asutosh Building Building College Street C Us, University Of Calcutta.
Tender Value
2.36 Lakhs
Estimated cost
Bid Submission
08 Jul 2026
0 days left
EMD
4700
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kolkata → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Renovation Of The Room At South East Corner Near By The Sales Counter (At Right Position Of Partition Wall) Ground Floor Of Asutosh Building Building College Street C Us, University Of Calcutta.
BOQ
| Sl. No. | Item Description |
| 1 | Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and inany floor including removing rubbish within alead of 75m as directed. |
| 2 | Dismantling all types of masonry excepting cementconcrete plain or reinforced, stacking serviceablematerials at site and removing rubbish as directedwithin a lead of 75 m.a) In ground floor including roof. |
| 3 | Dismantling artificial stone flooring upto 50 mm.thick by carefully chiselling without damaging thebase and removing rubbish as directed within alead of 75 m.a) In ground floor including roof.b) Extra Rs 06/-for each addl. Floor over the rate ofsecond floor |
| 4 | Manpower forshifting of materials furnitures from rooms and resshifting them after work and dismantelling of the iron structures Carpenter(skilled)/welder/santras |
| 5 | Capenter Helper |
| 6 | Labour |
| 7 | Removal of rubbish,earth etc. from the working site and disposal of the same beyond thecompound, in conformity with the Municipal /Corporation Rules for such disposal, loading into truck and cleaning the site in all respect as per direction of Engineer in charge |
| 8 | Applying 2 coats of bonding agent with synthetic multi functional rubberemulsion having adhesive and water proofing properties by mixing with waterin proportion (1 bonding agent : 4 water : 6 cement) as per Manufacturer's specification [ |
| 9 | Earth work in excavation of foundation trenches ordrains, in all sorts of soil (including mixed soil butexcluding laterite or sandstone) including removing,spreading or stacking the spoils within a lead of 75 m.as directed. The item includes necessary trimming thesides of trenches, levelling, dressing and ramming thebottom, bailing out water as required complete(a) Depth of excavation not exceeding 1,500 mm.. |
| 10 | (A) Filling in foundation or plinth by silver sand inlayers not exceeding 150 mm as directed andconsolidating the same by thorough saturation withwater, ramming complete including the cost of supplyof sand. (payment to be made on measurement offinished quantity) |
| 11 | Single Brick Flat Soling of picked jhama bricks including ramming anddressing bed to proper level and filling joints with local sand. |
| 12 | Brick work with 1st class bricks in cement mortar (1:6)(a) In foundation and plinth |
| 13 | (b) In superstructure, ground floor |
| 14 | 125 mm. thick brick work with 1st class bricks in cement mortar (1:4) inground floor. |
| 15 | Ordinary Cement concrete (mix 1:2:4) with graded stone chips (6mm nominalsize) excluding shuttering and reinforcement,if any, in gound floor as perrelevant IS codes Pakur variety. |
| 16 | Supplying,hoisting,fitting and fixing R.C.C. precast thin lintels, 75 mm. thick(1:1.5:3) conforming to the specification laid down in C.B.R.I. data sheetNo.1 with stone chips, sand, cement and reinforcement (both main anddistribution) bars upto 1.00 percent as per drawing and specificationincluding placing in situ and supporting arrangement for taking the load ofsuper-imposed brick work and striking of the same when directed.I. SAIL/ TATA/RINL |
| 17 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course,scaffolding/staging where necessary (in gf floor).With 1:6 cement mortar(a) 20 mm thick plaster any floor |
| 18 | Removing loose scales, blisters etc. from old painted surface andthoroughly smoothening the surface to make the same suitable for receiving fresh coat of paint. |
| 19 | Taking out shutter of door and window, dismantling by parts (for repair orreplacement of damaged parts) , reassembling and refitting and rehanging samewith old fittings but with new screws as necessary. (Where different parts ofsame shutter are renewed under different item, payment under item 73 will bemade once only). |
| 20 | Rendering the Surface of walls and ceiling with White Cement base WATER PROOF wall putty of approved make & brand.(1.5 mm thick) any floor |
| 21 | Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparingthe surface throughly, complete as per manufacturer's specification andas per direction of the EIC. (In Ground Floor) (a) One Coati) Water based interior grade Acrylic Primer |
| 22 | Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) :(Two coats)ii) Luxury Quality |
| 23 | (a) Priming one coat on timber or plastered surface with synthetic oilbound primer of approved quality including smoothening surfaces by sandpapering etc. |
| 24 | b) Priming one coat on steel or other metal surface with synthetic oilbound primer of approved quality including smoothening surfaces by sandpapering etc. |
| 25 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :(a) On timber or plastered surface :With super gloss (hi-gloss) -(iv) Two coats (with any shade except white) |
| 26 | (b) On steel or other metal surface :(iv) Two coats (with any shade except white) |
| 27 | Hire and labour charges for shuttering with centering and necessary stagingupto 4 m using approved stout props and thick hard wood planks of approvedthickness .....(a) 25 mm to 30 mm thick wooden shuttering as per decision & direction ofEngineer-In-Charge. |
| 28 | Collapsible gate with 40mm x 40mm x 6mm Tee as top and bottomguide rail, 20mm x 10mm x 2mm vertical channels 100mm apart infully stretched position 20mm x 5mm M.S. flats as collapsiblebracings properly rivetted and washered including 38mm steelrollers including locking arrangements, fitted and fixed in positionwith lugs set in cement concrete and including cutting necessaryholes, chasing etc. in walls, floors etc. and making good damagescomplete. |
| 29 | Reparing collapsible gate by cutting out all rivets as necessary reassamblingall members including welding pieces of channels,sraightening bent bars and rivetting with new rivets and fitting inposition and painting two coats. |
| 30 | (a) M.S.or W.I. Ornamental grill of approved design jointscontinuously welded with M.S, W.I. Flats and bars of windows,railing etc. fitted and fixed with necessary screws and lugs in groundfloor(i) Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr.. |
| 31 | Wood work in door and window frame fitted and fixed in position completeincluding a protective coat of painting at the contact surface of the frameexluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum shouldbe correted upto three decimals).(c) Sal : Siliguri. |
| 32 | Supplying solid flush type doors of deluxe decorative (both side) quality,conforming to I:S 2202 timber frame consisting of top and bottom rail and sidestyles of well seasoned timber 65mm wide each and the entire frame fitted with27.5mm wide battens places both ways in order to made the door of solid coreand internal lipping with teak, mahogony or rose wood approved decorativeveneers using phenol formaldehyde as glue etc. complete, including fitting, fixingthe shutters in position but excluding the cost of hinges and other fittings inground floora) 25mm thick shutters (single leaf): |
| 33 | Supplying, fitting and fixing M.S. clamps for door and window frame made of flatbent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) asper direction. (Cost of concrete will be paid separately(c) 40mm X 6mm, 125mm Length) |
| 34 | (i) Door stopper.(Brass) |
| 35 | i) Iron hasp bolt of approved quality fitted and fixed complete (oxidised) with16mm dia rod with centre bolt and round fitting(c) 300mm long.. |
| 36 | Add: GST @ 18 % Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender