Tender For Special Repair To Bldg No P-170 At Bb Cantt, Srinagar In The Aor Of Age B/R-Ii Under Ge 864 Ews
Tender Value
72.25 Lakhs
Estimated cost
Bid Submission
27 Jul 2026
20 days left
EMD
1.33 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
srinagar → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Bldg No P-170 At Bb Cantt, Srinagar In The Aor Of Age B/R-Ii Under Ge 864 Ews
BOQ
| Sl. No. | Item Description |
| 1 | Taking down frame with shutters (without taking off shutters from frame) exc 1.5 sqm but n.exc 4 sqm each complete all as specified and directed. |
| 2 | Taking down frame with shutters (without taking off shutters from frame) n exc 1.5 sqm each all as specified and directed. |
| 3 | S&F powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (fixed portions) with extruded built up standard tubular sections/ appropriate Z sections/ and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. |
| 4 | S&F powder coating of any colour (thickness or powder coating not less than 50 micron anodised aluminium door shutters (openable / sliding), aluminium section weighing 0.55 Kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws, handle, locking arrangement etc 5.5mm thick sheet glass (plain/ tinted/ frosted as per site requirement) in one half portion and 12mm thick prelaminated board in another half portion including 01 x hydraulic door closer for each pane complete all as specified and directed. |
| 5 | S&F powder coating of any colour (thickness or powder coating not less than 50 micron Anodised aluminium window and ventilator shutters, fixed type/sliding type (3 track) /side hung type without sash bar, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, handle, locking arrangement etc. 4mm thick sheet glass(plain/ tinted/ frosted as per site requirement) glass complete all as specified and directed. |
| 6 | S&F 12mm thick toughned glass as in hinged doors,partitions automatic doors with necessary long soild fency handles 2 Nos in each door, suitable hinges, locking arrangment hydraulic floor spring as required,design in printing 92 BH logo on glass door. including cutting to shape,drilling holes required, including frame work of mild steel to support hinges on top and sides , frame work duly fixed/embeded in to wall with minimum 150mm long flats/fastener at every 0.30m interval along its length necessary items, all fittings and fixtures as per requirement, complete all as specified and directed. |
| 7 | S&F galvanised mild steel wire cloth,0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples etc complete all as specified. |
| 8 | M&L for solid PVC foor frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification complete all as specified and directed. |
| 9 | S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed. |
| 10 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength 550 Mpa as in roof covering/clading to wall, fixed with self tapping screws including dismantling of old sheet complete all as specified and directed. |
| 11 | S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength 550 Mpa as in roof covering/clading to wall, fixed with self tapping including dismantling of old sheet complete all as specified and directed. |
| 12 | S&F in repair 20mm thick designer eaves board as in edges of roof covering including all scaffolding, fixing and accessories as required onsite, design as approved by Engr in charge complete all as specified and directed |
| 13 | M&L wrought second class hard-wood in scantlings framed, railing works and similar wks etc & fixed in frame work including dismantling complete all as specified. |
| 14 | M&L 6mm thick non asbestos fibre cement /pre laminated self embosssed texture designer board E-Board classic size 595x595mm, HPSC (High pressure steam cured) to be fixed or inserted to pre laminated Gl frame work for seamless ceiling comprising of Gl perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre & hangers 2 to 3 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long including dismantling of old boards complete all as specified and directed. |
| 15 | M&L 2nd class hardwood 40mm thick boarding as in flooring, steps plane one side with butt joints and fixed with nails, including dismantling, complete all as specified and directed. |
| 16 | S&F in repair wooden laminated flooring strips 120cm long and 20 cm wide and 6-8 mm thick over and including 12mm thick BWR Plywood over which wooden flooring is to be laid and fixed with PVC sheet and cushion including fillets/cornices, including dismantling boarding .any description, fixed in any position with nails as in flooring ,cupboard, drawers, showcase, cupboard shutters, wooden shelves, partition, wooden flooring etc complete all as specified and directed. |
| 17 | M&L 1.5mm thick linoleum, plain coloured, laid dry in floors /steps including stretching, cutting and sealed down with an approved adhesive & aluminium nosing fillet wherever required over and including 12mm thick BWR plywood over which wooden flooring is to be laid complete all as specified and directed. |
| 18 | M&L virified ceramic tiles 10 mm thick (square/ rectangular) dark polished, area of each tiles not exceeding 0.36 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar 1:6, including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) etc complete all specified and directed. |
| 19 | Taking down cement plaster on brick or stone walls, etc including raking out joints,hacking for key, scrubing down with water etc complete all as specified and directed. |
| 20 | M&L for rendering 10mm thick in cement mortar 1:6 on brick work or concrete surfaces finished even and fair without using extra cement, complete all as specified and directed. |
| 21 | M&L for preparation of new plastered surfaces by washing, rubbing down and applying 2 mm thick wall care putty and a coat of alkali resistant primer and two coat of oil emulation distemper on wall etc complete all as specified and directed. |
| 22 | M&L for preparation of old plastered surfaces by washing, rubbing down and applying 2mm thick wallcare putty a coat of alkali resistant primer and two coats of oil emulation distemper on wall etc complete all as specified and directed. |
| 23 | M&L for complete removal of old treatment/ paint & preparation of wooden surfaces of any description not other wise described over 10 cm width or girth and applying two coat of synthetic enamel paint complete all as specified and directed. |
| 24 | S&F 10-12mm thick 1st class soft wood Australlian wooden panelling fixed with toughened grouted as wall paneliling including fillets/cornices including 9mm thick plywood BWR fixing on walls and two coats of varnishing,polishing and preparation with sneezing complete all as specified and directed. |
| 25 | S&F in repair 25mm dia stainless steel drapery curtain rods, heavy duty, fancy type with fancy brackets & domes (two in each door and window) complete all as specifeid and directed. |
| 26 | M&L for 25 mm thick PCC 1:3:6, type C-2 (using 20 mm graded stone aggregate) as in floor complete all as specified and directed. |
| 27 | M&L non-skid ceramic coloured tiles 7-8 mm thick,area exc 0.18 Sqm but n.exc 0.38 Sqm of each tile in floor etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile over and including 15mm thick screed bed in CM 1:4 complete including dismantling of floor tiling, complete all as specified and directed. |
| 28 | M&L coloured glazed ceramic tiles in vertical surface 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick backing coat in CM 1:4, including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) etc complete all as specified and directed. |
| 29 | S&F in repairs 10 ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including flush pipe of polyethylene of low or high density or PVC 32 mm dia complete all as specified and directed. |
| 30 | S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white excluding fixing bolts, flushing cistern and flush pipe) including PVC seat cover (closed pattern) and CP health facet, connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc complete all as specified and directed. |
| 31 | S&F PVC connections 15mm size with PTMT nuts of length 450mm etc complete all as specified and directed. |
| 32 | S&F PVC floor trap, with grating including jointing to waste pipe fixed in cement concrete 1:2:4, type B-1 of 75 mm dia etc complete all as specified and directed. |
| 33 | S&F in repair vitreous china bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe complete all as specified and directed. |
| 34 | S&F in repair CP urinal spreader of any colour for fixing with 15mm dia pipecomplete all as specified and directed. |
| 35 | S&F in repairs vitreous china wash basin of size 550x400mm (flat back or angle back type) including brackets cutting for and pinning in ends of brackets or erecting stand inclusive 32mm waste fittings, brass, chromium plated for basins, waste pipe etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement etc complete all as specified and directed. |
| 36 | S&F in repairs 15mm bore Brass CP mixer 3-in-1(sink/WHB/wall) (any pattern) for mixing hot, cold water and shower conection, screwed down for iron pipe, with or without hand shower and fixed complete all as specified and directed. |
| 37 | S&F in brass chromium plated Tubular towel rail 20mm dia complete all as specified and directed. |
| 38 | S&F in repairs 15mm bore Bib taps, chromium plated, fancy type, screwed down, screwed for iron pipe or for brass ferrule etc complete all as specified and directed. |
| 39 | S&F in repairs 15mm bore stop valves or angle valve, fancy type chromium plated, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions etc complete all as specified and directed. |
| 40 | S&F 110 mm dia PVC (SWR) pipes including necessary bends, fittings etc single socketed in any length with rubber ring joints laid in floors/ trenches including taking down complete all as specified and directed. |
| 41 | S&F 75 mm dia PVC (SWR) pipes including necessary bends, fittings etc single socketed in any length with rubber ring joints laid in floors/ trenches including taking down complete all as specified and directed. |
| 42 | S&F in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm longcomplete all as specified and directed. |
| 43 | M&L for brickwork with old sized subclass 'B' bricks straight or curved on plan exc 6m mean radius and built in CM 1:6 etc incl demolition complete all as specified and directed. |
| 44 | M&L for formwork to sides and soffits of floor/slab or beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and directed. |
| 45 | M&L mild steel TMT bars 10mm dia & over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips complite all as specified and directed. |
| 46 | M&L mild steel TMT bars but 5mm dia and over upto and including 10mm dia in stirrups, spacers , and binders complite all as specified and directed. |
| 47 | M&L for RCC (nominal mix) 1:2:4, type B1 (using 20mm graded stone aggregate) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like including use and waste formwork up to 6m hight complete all as specified and directed. |
| 48 | M&L for plain cement concrete 1:3:6 type C-1, M-10 (Nominal mix) (using 20mm graded crushed stone aggregate) as in filling of sunken floor to receive floor top finished, including demolitioncomplete all as specified and directed. |
| 49 | M&L for (a) 15mm thick plaster in cement sand mortar 1:4 mixed with water proofing compound (conform to IS 2645-Specifictions for integral cement water proofing compound) as approved as per manufacturer’s instructions shall be applied both on floor and wall. Thesurfaces then shall be cured and allowed to dry. All the joints of pipe shall be sealed properly as per the instruction of agency who is carrying out water proofing treatment.(b) Apply a coat of Moisture Cured High Tensile Elastomeric Modified Poly Urethane BasedLiquid Membrane on floor as well as on wall as per manufacturer’s instructions ofmake/manufacturers as specified in clause 10.2 here-in-before. After the treatment is over, sunkenportion shall be kept full of water for atleast one week to check that no seepage is seen from theexternal surface. (c) Manufacturer/approved agencies for water proofing treatment to sunken slab/portion membrane shall be as per approved list |
| 50 | S&F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washersl complete all as specified and directed. |
| 51 | S&F in repair chromium plated shower rose with or without swivel joints any size, including fixing to steel pipe or union complete all as specified and directed. |
| 52 | S&F in Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed |
| 53 | S&F in repair 20mm (outer dia) 3- layer PP-R concealed pipes SDR 7.4 UV stabilized and anti microbial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fitings fixed completed to walls, ceilings or floors etc including necessary items, all fittings and fixtures as per requirement, complete all as specified and directed. |
| 54 | S&F in repair 25mm (outer dia) 3- layer PP-R concealed pipes SDR 7.4 UV stabilized and anti microbial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fitings fixed completed to walls, ceilings or floors etc including necessary items, all fittings and fixtures as per requirement, complete all as specified and directed. |
| 55 | S&F for 500 ltr capacity rotational three layer moulded polyethylene water storage tanks cylindrical vertical with closed top) hoisted and fixed in position/ including dismantiling old water tank all as specified in SSR Part I complete all as specified and directed. |
| 56 | S&F for framed brackets of angles or tees with web and flanges, tubular pipes cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc..n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 & dismantling wrought iron or mild steel work of any description complete all as specified and directed. |
| 57 | M&l for preparation of new or previously untreated steel of any description over 10 cm width or grith and applying two coats of synthetic emnamel paint over a coat of red oxide primer complete all as specified and directed. |
| 58 | S&F in repairs soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed. |
| 59 | S&F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. |
| 60 | S&F 250mm aluminium alloy, anodised, sliding door bolt with hasp, staple & fixed clips of sheet, cast or extruded section & fixed bolts & sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed. |
| 61 | S&F 100 mm long butt hinges extruded aluminium anodised complete all as specified and directed. |
| 62 | S&F 150mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed. |
| 63 | S&F aluminium anodised alloy handles fabricated type 150mm size of handle complete all as specified and directed. |
| 64 | M&L 9mm thick plywood, grade BWR fixed with screws to frame work as in false ceiling including dismantling of old boards complete all as specified and directed. |
| 65 | M&L for taking down carefully existing old burnt out / unserviceable aluminium / copper point wiring system any type/ size and any description complete for light, fan,bell,socket, power points etc complete including removing the all type of fittings & fixture alongwith it connected fixing acessories such as all switches, sockets, ceiling roses, holder, regulators, bell etc complete and removing of all the old materials from the site for to taking as a schedule of credit complete all as specified and directed by EIC . |
| 66 | Dismantling unserviceable main switch/DBs with MCBs complete all as specified and directed. |
| 67 | Taking down carefully FCU from site and Refix it after necessary repair complete all as specified and directed. |
| 68 | Taking down carefully ceiliing fan from site and deposit it in MES store yard complete all as specified and directed. |
| 69 | Taking down carefully electric water heater from site and deposit it in MES store yard complete all as specified and directed. |
| 70 | M&L for making single phasing point wiring system used as copper conductor wire for phase and neutral wiring system the wire made out of PVC insulated FRLS of 1100 volt grade with having multistranded copper conductor wire of size 1.5 Sq.mm (Nominal area) ISI marked drawn through wiring system surface on wall or concealed in wall with the help of heavy duty ISI mark PVC casing capping strip / PVC conduit pipe ISI mark in any lengthy wiring system and along with its all connected fittings accessories including providing of pressed steel terminal sunken boxes or heavy duty PVC box and duly fixed it concealed in wall or surface on wall and alongwith providing of back and face top covered plate frame or electro plated plastic laminated sheet for housing / mounting of any type/size switches sockets, regulators etc and including using /drawing of one run of single wire 1.5 sqmm PVC insulated FRLS wire 1100 volt grade ISI marked with multistranded copper conductor wire used as a continuous earth wire for point wiring complete system and including making the good to all disturbed surfaces of wall/ceiling area of new wiring system and to match to it as per the existing surface of wall/ceiling one light point / fan point wiring system controlled by one way switch etc. complete all as specified and directed by EIC. |
| 71 | All as per ser item No 70 here-in-before but one 5 Amps socket outlet point wiring system fixed on same board & controlled by one way switch complete all as specified and directed |
| 72 | All as per ser item No 70 here-in-before but one 5 Amps socket outlet point wiring system fixed on independent board & controlled by one way switch complete all as specified and directed. |
| 73 | All as per ser item No 70 here-in-before but two 2 way piont and controlled by one two way switch point wiring system complete all as specified and directed. |
| 74 | All as per ser item No 70 here-in-before but using PVC insulated FRLS wire 1100 volt grade with multistranded copper conductor wire of size 2.5 Sq. mm (Nominal area) ISI Marked for power socket point on indenpent board point wiring system and also providing of 2.5 sqmm PVC insulated FRLS wire 1100 volt grade ISI Marked with multistranded copper conductor wire used as a continuous earth wire for power point wiring system complete . |
| 75 | All as per ser item No 70 here-in-before but using single runs of PVC insulated FRLS wire ,1100 Volts grade with multistranded copper conductor wire of size 4 Sq.mm (Nominal area) ISI Marked for high power wiring system with fixed on independent board and also providing of 4 sqmm PVC insulated FRLS wire 1100 Volts grade ISI Marked with multistranded copper conductor wire used as continuous earth wire complete all as specified and directed. |
| 76 | S&F of modular type switch 5/6 Amps 220 Volts AC,one module complete all as specified and directed. |
| 77 | S&F of modular type socket of 5/6 Amps 220 Volts AC, 3/5 multi pin type with two modular complete all as specified and directed. |
| 78 | S&F of modular type switch of 15/16 Amps 220 Volts AC one module complete all as specified and directed. |
| 79 | S&F of modular type socket of 15/16 Amps 220 Volts AC 5/6 multi pin type with two modular complete all as specified and directed. |
| 80 | S&F of one/two modular type step type electronic fan regulator with having hum free step alongwith speed control know complete all as specified and directed. |
| 81 | S&F ceiling rose three terminals type made out of polycarbonate , isolated body complete all as specified and directed. |
| 82 | S&F of angular/batten type shape lamp holder with PVC/ polycarbonate insulated body, alongwith brass adhapor and back plate for housing of bulb Including providing of LED bulb of capacity 7/9 watt warm/ white colour type complete all as specified and directed . |
| 83 | S&F of LED tube light fitting of 1x 20W/22W 220V AC decorative box type with driver, holder including LED tube light with having energy efficient type use in both warm/white type colour complete including providing of suitable type flate fexible cable for electric connection from ceiling rose to fitting comlplete and including taking down of old fitting all as specified & directed. Make : Havells cat part No ENDURA LINEARNEOBS20WLED865SPCWH or Equavalent in Bajaj/Philips/Crompton |
| 84 | S&F of LED mirror light fitting with high out put diffuuser 2 feet long of 10 Watt 220 volt AC decorative type with driver holder and LED lamp with having energy efficient type use in both warm/white type colour complete light fitting set all as per existing fitting type/ size of sample /model and make and including providing of suitable type flate fexible cable for electric connection from ceiling rose to fitting and makong electric connection and including taking down of old fitting complete all as specified and directed. |
| 85 | S&F recessed / ceiling concealed mounted flat slim panel square shape with LED luminaire panel type fitting of size 600 mm x 600 mm of rating capacity in 35W/36/37 Watt 220 volt AC recessed type with high efficiency PMMA diffuser soft glare free light with driver, holder & LED lamps complete used for roof ceiling and required fitting use in both warm/white type colour complete set providing of suitable type of flat flexible two/three core cable and making electric connection complete set including making in additional extra corner cutting work on existing hole of ceiling surface (when if required at site) for setting & fixing of new light fitting complete all as specified and directed. Make Bajaj cat part No BARSQL 36W WH / Crompton cat part No LCTLRF7-36-CDL/ Philips Cat part No RC375B LED 30S /865 PSU W60 L605 S1 WH |
| 86 | S&F of LED street light fitting of rated capacity 35 Watts 230 Volts AC with having LED driver,lamp bracket with impact and corrosion resistant with lense embeded including thermal management in multiple optices complete with IP 65/66 protectiuon suitable for out door type made out of high pressure die cast hosing with heat resistant glass complete including providing of suitable size of dia GI pipe light grade bracket and it to match/setting the new fitting fixture hole attechment system of suitable bracket length upto 1.2 mtr long and make to shape / bend of 120 degree angle including duly fixed alongwith existing pole /bldg wall/ roof with the help of 02 Nos of MS fixing clamp alongwith nut bolt and including providing of suitable type of flate fexible two/three core cable and makong electric connection and including taking down of old fitting complete all as specified and directed. Make : Havells cat part No ENDURASUNDOWNSL25WLED765PASYBOPCIHD or Equavalent in Bajaj/Philips/Crompton |
| 87 | S&F of sheet metal enclosure duly powder coated with single pole and neural enclosure with having a two pin and earth plug & top and mounting chanel alongwith one 01 MCB SP 20 Amps and dully fixed surface on wall or concealed in wall and making all necessary electrical connection including taking down of existing DBs a as required at site or directed complete all as specified and directed. |
| 88 | S&F of sheet metal enclosure box duly powder coated & framing work with locking system and having double door fixing arrangement system suitable of size/type for vertical type distribution board vertical loadline type of rating VTPN 4 way type 415 Volts 3 phase AC supply holding system with IP protection rating with ISI marked and having fitted neutral and earth link bus bar and mounting base chanels and blanking plates suitable for holding of main MCCB as incommer and out going MCB complete system alongwith providing and mounting in side of DB box of 01 No of MCCB TP160 Amps with breaking rupting capacity 25 KA and having adjustable setting type and also providing of 12 Nos of MCB SP 63 Amps 10KA 'C' curve type of the same manufacture make as per of distribution board make complete set and including dully fixed surface on wall or concealed in wall and making all necessary electrical and also refixing the electric meter and its wiring connection including taking down of existing meter and DBs complete all as specified and directed by EIC. |
| 89 | S&F of sheet metal enclosure box duly powder coated & framing work with locking system and having double door fixing arrangement system suitable of size/type of distribution board of rating SPN 8 way type 220 Volts AC supply system with IP protection rating with ISI marked and having neutral and earth link bus bar and mounting base chanel suitable for holding MCBs incommer and s outgoing system complete set and including dully fixed surface on wall or concealed in wall and making all necessary electrical and also refixing the electric meter and its wiring connection including taking down of existing meter and DBs complete all as specified and directed by EIC. |
| 90 | S&F of MCB SPN 40 to 63 Amps with breaking capacity 10KA 'C' Curve series, 220 Volts, 50 Hz AC supply complete and also making suitable size / type of electric wiring coneenection complete including taking down of old MCB complete all as specified. |
| 91 | S&F of MCB SP 40 to 63 Amps with breaking capacity 10KA 'B' Curve series, 220 Volts, 50 Hz AC supply complete and also making suitable size / type of electric wiring coneenection complete including taking down of old MCB complete all as specified. |
| 92 | S&F of MCB SP 06 to 32 Amps with breaking capacity 10KA 'C' Curve series, 220 Volts, 50 Hz AC supply complete and also making suitable size / type of electric wiring coneenection complete including taking down of old MCB complete all as specified and directed. |
| 93 | S&F of sub main wiring system with two runs PVC insulated FRLS wire,1100 volt grade with multistranded copper conductor wire of size 2 Run of 10 Sqmm and 1 Run of 10 Sqmm (Nominal area) (ISI Marked) any type any length drawn through in heavy duty ISI mark PVC Casing capping / PVC conduit of suitable size along with its all fittings and connected accessories and duly fixed concealed on wall or surface on wall including taking down old unservicable sub main wiring system complete and making good all disturbed surfaces match to the existing surface complete all as specified and directed . |
| 94 | S&F of sub main wiring system with two runs PVC insulated FRLS wire,1100 volt grade with multistranded copper conductor wire of size 2 Run of 6 Sqmm and 1 Run of 6 Sqmm (Nominal area) (ISI Marked) any type any length drawn through in heavy duty ISI mark PVC Casing capping / PVC conduit of suitable size along with its all fittings and connected accessories and duly fixed concealed on wall or surface on wall including taking down old unservicable sub main wiring system complete and making good all disturbed surfaces match to the existing surface complete all as specified and directed . |
| 95 | M&L for taking down of old unserviceable electric water storage heating system of capacity 50 ltrs and replacement with by all new one of body parts and it all connected fixing accessories of system like out of PVC /mild steel outer body with back and top plate framing work along with hot water inner tank and glass wool insulation materials with geyser heating assembly with base support MS plate washer and nut bolt & heating elements up to 2KW lamp, controller setting knob, flexible cable with top etc of system and after replacement of new body parts refixing/ hanging the on same place of wall with the help of nut, bolt etc complete including providing of suitable type flat flexible cable and making electric connection, complete all as specified and directed. |
| 96 | Taking down existing 1200 mm sweep ceiling fan from ceiling including disconnecting wiring, dismantling complete fan body, supplying and fixing new fan body/casing with necessary screws, nuts, bolts, down rod, shackle, canopy & rewinding motar etc. including re-assembly of existing motor and blades, connection, testing, commissioning and refixing at original position complete aall as specified and directed by Engineer-in-Charge. |
| 97 | Supply fixing and comissiong and testing of star rated of electric ventilation exhaust fan of size 300 mm sweep complete AC single phase 230 volt and made out of sturdy engineering plastic body complete with blade and louvers with shutter and also providing or making of suitable type/size of hole on wall out of any type of wall constraction work for installation /fixing of exhaust fan after fan fixing work making good to all diturbed hole surface area of wall/ceiling and floor area of hole system and to match/dressing to it as per the existing surface os wall/floor/ceiling etc by cement plastering work complete all as specified and directed by EIC. |
| 98 | Taking down, dismantling, repairing, servicing and refixing of existing wall mounted fan complete with disconnecting electrical connection, removal from existing mounting bracket, dismantling of guards, blades, motor cover and oscillation mechanism, internal cleaning of motor, blades and guards, removal of dust and carbon deposits, lubrication/greasing of bearings, bushes, shaft and moving parts, checking of motor winding, capacitor, bearings, oscillation gear, shaft alignment and electrical connections, renewal of defective minor spare parts such as capacitor, bearing, screws, nuts, connectors etc. complete all as specified and directed. |
| 99 | M&L for fixing of copper tubing of size 12 mm OD , 0.9 mm wall thickness including proper saddling, clamping and insertion of branches connections including all fittings for medical use ,complete all as specified and directed. |
| 100 | M&L for fixing 1/2' Brass Ball valve with end fittings including all fittings for medical use ,complete all as specified and directed. |
| 101 | M&L for fixing of copper tubing of size 22 mm OD , 0.9mm wall thickness including proper saddling, clamping and insertion of branches connections including all fittings for medical use ,complete all as specified and directed. |
| 102 | M&L for fixing 3/4' Brass Ball valve with end fittings including all fittings for medical use ,complete all as specified and directed. |
| 103 | S&F sigma type gas outlet for oxygen for medical complete all as specified and directed. Make : As approved by BOC. |
| 104 | S&F bed panel with oxygen, vacuum and nitrozen with complete accessoreis suitable for patient bed complete all as specified and directed. |
| 105 | S&F galvanised steel tubing, light grade, ISI marked, for protection of under ground cable on pole/wall/under road including taking out old unserviceable pipe 40 mm bore complete all as specified and directed. |
| 106 | Supply, laying and testing of LT cable XLPE insulated screened, PVC bedded galvanized steel strip or wire armoured electric power cable (heavy duty) with aluminium conductor 1100 volt grade cross sectional area of size 35 sqmm 3.5 core including laid in trenches or fixing on poles or passing through pipes complete including taking out of old unserviceable cable any type any size complete all as specified and directed. |
| 107 | Excavation in trenches, not exceeding 1.5 m wide and not exc 1.5 m in depth; for laying of cables, pipes etc. and getting out all excavated material in any type of soil complete all as specified and directed. |
| 108 | Returning, filling in and including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and as directed. |
| 109 | Removing of excavated surplus soil to a distance not exc 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed. |
| 110 | M&L of Locally available river sand filling in trenches below and above / around UG cable for cable protection, in duct under & above the cables including punning around cable complete all as specified and directed.Note - Punned thickness shall only be measured and paid. |
| 111 | M&L for providing of new sub class 'B' bricks, old size, well burnt laid flat dry for protection of under ground cable complete all as specified and directed. |
| 112 | M&L for earthing work complete with galvanised steel earth plate electrode 60 cm X 60 cm and 6 mm thick buried directly in ground vertically to a depth not less than 2.25 mtr deep below ground level with top edge of earth plate at a depth not less than 1.5 m below normal ground level and connected to galvanised earth lead wire 4.0 mm dia by means of bolts, check nuts and washers of galvanised steel and to be protected by GI pipe 15 mm bore light grade & connected to earth test point/main switch board or main control board and also providing charcoal or coke and salt in alternative layers, necessary excavation and earth work in any type of soil all as shown in Electrical Plate No 3 of SSR part -I. and also making arrangment of 20 mm dia bore galvanised iron pipe (medium grade) for water and making funnel, wire mesh,and also including provision of concrete pit cover framing work in PCC 1:2:4, type B-1 (using 20mm graded of stone aggregate) with XPM (weight not less than 4 Kg/Sqm) and outer frame work of angle iron 25x25x6mm with top concrete pit cover and handle for lifting of cover complete work all as specified and directed. |
| 113 | Taking down carefully of copper tubing of size 12mm & 22mm complete all as specified and directed. |
| 114 | Taking down carefully 1/2' & 3/4' brass ball valve complete all as specified and directed. |
| 115 | Taking down carefully sigma type gas outlet complete all as specified and directed. |
| 116 | Taking down carefully bed panel with oxygen, vacuum and nitrozen complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysAug 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 28 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender