Tender For Permanent Restoration Of Damaged Infrastructure Of Water Supply Scheme Sundla Under Sasci 2026
Tender Value
1.26 Crore
Estimated cost
Bid Submission
14 Jul 2026
0 days left
EMD
2.52 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Udhampur → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Permanent Restoration Of Damaged Infrastructure Of Water Supply Scheme Sundla Under Sasci 2026
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 09-Jul-2026 | date extend ii1 | Date | 14-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil : 30% |
| 2 | Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. 2.6.1 All kinds of soil : |
| 3 | Extra for providing richer mixes at all floor levels. Note:- Excess/ less cement over the specified cement content used is payable/ recoverable separately. 5.35.1 Providing M-30 grade concrete instead of M-25 grade BMC/RMC. |
| 4 | 15mm Cement plaster on the rough side of single or half brick wall of mix: 13.5.1 1 : 4 ( 1 cement : 4 coarse sand) |
| 5 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand) |
| 6 | Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level |
| 7 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 5.3.1 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 8 | Cement plaster 1 : 3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement 13.10.1 12 mm cement plaster |
| 9 | Supply of stones |
| 10 | Dumping of stones in horizontol on level |
| 11 | Providing and laying damp-proof Course 50 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and curing complete |
| 12 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 80mm dia |
| 13 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 50mm dia |
| 14 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth All kinds of soil : 1 mtr cutting edge |
| 15 | Centering and shuttering including strutting, propping etc. and removal of form for: Arches, domes, vaults upto 6 m span |
| 16 | Extra for arches, domes, vaults exceeding 6 m span |
| 17 | Centering and shuttering including strutting, propping etc. and removal of form for: Lintel, beams, plinth beams, girders, bressumers and cantilevers. |
| 18 | Extra for shuttering in circular work |
| 19 | Providing and fixing G.I. pipes 32mm dia for railing of stairs and gallery |
| 20 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size |
| 21 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 22 | Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge All works upto plinth level |
| 23 | Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improveworkability without impairing strength and durability as per direction of Engineer-in charge All works above plinth level upto floor V level |
| 24 | Reinforced cement concrete work in arches, archribs, domes, vaults shells, folded plate and roofs having slope more than 15° upto floor five level level including curing but excluding the cost of centering, shuttering finishing and reinforcement with: 5.5.1 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 25 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level |
| 26 | Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases for columns |
| 27 | Extra for shuttering in circular work |
| 28 | Centering and shuttering including strutting, propping etc. and removal of form for: Walls (any thickness) including attached pilasters, buttresses, plinth andstring courses etc. |
| 29 | Extra for shuttering in circular work |
| 30 | Centering and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platforms |
| 31 | Edges of slabs and breaks in floors and walls |
| 32 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete 50 mm thick with 20mm nominal size stone aggregate. |
| 33 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two or more coats on new work |
| 34 | Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm) |
| 35 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded |
| 36 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Second Class deodar wood. |
| 37 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two or more coats on new work |
| 38 | Colour washing such as green blue or buff to give an even shade 13.48.1 New work (two or more coats) with a basecoat of white washing with lime. |
| 39 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. 10.5.1 Using M.S. angles 40x40x6mm for diagonal braces |
| 40 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete. 9.48.1 Fixed to steel windows by welding |
| 41 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete |
| 42 | Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. (i) Single socketed pipes 110 mm diametre |
| 43 | Providing and fixing Reflux valve ISI marked/heavy duty swing check type Reflux (Non return valve) for water work purposes single door pattern confirming to IS 5312 Part 1 1984 with up to date amendment nominal pressure 80mm dia |
| 44 | Providing and fixing Reflux valve ISI marked/heavy duty swing check type Reflux (Non return valve) for water work purposes single door pattern confirming to IS 5312 Part 1 1984 with up to date amendment nominal pressure 100mm dia |
| 45 | Providing and incorporating ( During concreting GP sheet strings water seal 1.25 mm nominal thick at const. joints including ends so as to form a continues barrier strips area excluding laps to be measured |
| 46 | Providing, stacking and Filling of graded stone agg. (Filter Media) of size 1.0 -1.5mm, 4-6mm, 15-25mm in four layers (Nallah) including carriage from source to be indentified by Engineer Incharge. |
| 47 | Supply of Silica sand as filter media of size 0.45 mm - 0.7 mm having uniform co-efficient 1.3-1.75 and should be free from dust and other organic and inorganic impurities including carriage from source i.e Calcutta west Bengal |
| 48 | Providing and laying Double Flanged (Screwed/ Welded) Centrifugally (Spun) Ductile Iron Pipes of Class K-9 conforming to IS : 8329 300 mm dia Ductile Iron Double Flanged |
| 49 | Providing and laying Double Flanged (Screwed/ Welded) Centrifugally (Spun) Ductile Iron Pipes of Class K-9 conforming to IS : 8329 200 mm dia Ductile Iron Double Flanged |
| 50 | Providing and laying D.I. Specials of Class K-12 suitable for mechanical jointing as per IS : 9523 19.60.1 Upto 600 mm dia. |
| 51 | Providing and fixing of D.I sluice valve confirming to IS:780 read with upto date ammendments standard make meant for Pipe gallery in filter beds required to operatd from operating planteform height 4.5m, hence suitable opearation to be provided the job includes, providing and fixing fubrication of tact pieces as per site reguirements inclueding nuts, bolts, ruber, insertions. the sluice valve shoud be fitted with extension nod pedstals etc. (Filter bed inlet & out let ) of dia 200mm |
| 52 | Providing and fixing of D.I sluice valve confirming to IS:780 read with upto date ammendments standard make meant for Pipe gallery in filter beds required to operatd from operating planteform height 4.5m, hence suitable opearation to be provided the job includes, providing and fixing fubrication of tact pieces as per site reguirements inclueding nuts, bolts, ruber, insertions. the sluice valve shoud be fitted with extension nod pedstals etc. (Filter bed inlet & out let ) of dia 300mm |
| 53 | Providing and Fixing of CI Sluice valve (with cap ) complete with bolts, nuts, rubber, insertion. The sluice valve shold be fitted with extension ped stals etc (inside sludge pits) of dia200m |
| 54 | Providing and Fixing of CI Sluice valve (with cap ) complete with bolts, nuts, rubber, insertion. The sluice valve shold be fitted with extension ped stals etc (inside sludge pits) of dia300m |
| 55 | Providing and Fixing of 80 mm dia PVC under drainage lateral 80mm thick fabricated out with 9mm perforations as per design in the provided at 60\\" along with PVC/RCC, Tees and end caps to be grouted in M-25 grade cement con. At ends the pressure rating 10Kg/Cm2 |
| 56 | Providing and fixing of air blower (Everest make or kay make) capable for providing compression @ 225 cum per minute @ 0.35 kg/Sqm with suitable 3 phase induction motor with auxilary pipe system upto filter bds fitting prssure guge nozzels cement black base plate air check valves, non return valves, cement conc black in M-20 grade foundation bolt base frame fabricated out at 100mm MS channels, the job also includes PRV Pipe and Pipe fittings shurters and PVC 19/28 coper wive complete job & other elctrical controlling devices fitted on panel board complete Job along with stand by Blower. |
| 57 | Providing installation testing commissioning of monoblock pumping equipment capable of lifting of 35 cum per hour for a height at 20 m with 3 phse appropriate rate power induction moves with sturter assembly suction and delivery pipe and pipe fittings of required sec. upto back was tank, the job inc; all eclectrical operating devices fitted on pannel borad along with stand by motor |
| 58 | Providing and Fixing of mechanical equipemnt required for Alum solution tank with electrically driven Paddle asembly fitted with suitable reduction gear mechasism upto point of application in the flash mixer along with washout arragnements plus 25mm dia GI inlet water line from back was tank to alum with GI pipe specials and gate valve in electrical operating device complete Job |
| 59 | Providing installation testing commissioning of flash mixer assembly suitable for a dia 0.70 m comprising of SS chunners with verticle tyupe hollow shaft prime moves 3 phase 150 RPM. The Job includes constent bleed assembly with reduction gear box and operational gear to regulate the bleed. complete Job |
| 60 | Providing installation testing commissioning of 3 phase oil immersed 30 KVA voltage stabilizer (servo make) capable to perate incoming voltae of 180 volt and outgoing voltage at 410+-10% volt complete Job |
| 61 | Providing and laying of 4 crore 50 mm Aluminum cable to be laid as service line from nearest LT Pole upto main Pannel board incl. to be laid under ground |
| 62 | Provding installation testing commissioning of 100 Amp dust/moisture Proof cubical pannel fitted with 3 hase 100 Amp MCCB l&T make 02 no. and 65 Amp single phase MCCB fr lighting and heating systems. The job also includes no. amp metre 0.100 AE make with CT coips and one number voltmetre AE make 0.500 with selector switches, L&T make and 3 No. indicator lamps Neon type complete Job. |
| 63 | Providing and fitting concealed internal Electrification of room including 12 Nos LED lights, Fan points 2 No., Fuse box 1 No., 6 no 15 Amp sockets with switch, 5 Amp 4 no. sockets with switch - of approved brand and 04 nos LED security lights 30 watts, Main switch with complete wiring, with MS bracket for pole mounting complete including service line upto a length of 10 meters. including under grond conduct pipes, wiring, steel boxes and switches for 12 No. light Points (internal) with holder and LED bulbs and external 4 Nos. with LED Security lights with required M.S Bracket for mainting (external grade) complete as directed by Engineer incharge. including necessary earthing as per electrical schedule manual. |
| 64 | Provind and fitting of Automated bleaching doser pump along with all necessary acesseries inc; Provision for constant dozing of bleaching along with required arrangement i.e motor, switches, starter/Autmatic panel etc. (complete Job) along with stand by unit. |
| 65 | Providing and fixing of MS rotating bridge fabricated IS 50x50x6mm angle suitable for bearing silt of PST (dia) 5.3m. The Job including cerival bearing assembly shaft and MS Wheels, Stop Wheels and deflector draft tube fabricated out of MS Sheet with Proper Proforatin as per site requrement, including placing in position with adequate rotating prime moves 3 phase 440 volt 50Hz inc. fly sheel and MS rail, on fish plate grouted on top base of PST in cement concrete. The Job ncludes provding and installation of 3 phase cubical electrical panel 63 Amp capcity with appropriate ratingt 3 hase MCCB/OCB and Automatic panel of electrical motors incl. connecting eith electrical PVC copper cable and on poll system. The Job includes fabriation and fitting f scraper blades fabricated out of 50x50x6mm angle & 3mm thick sheet including assembly with rotating system and central shaft. |
| 66 | Providing and fixing of MS rotating bridge fabricated IS 50x50x6mm angle suitable for bearing silt load of flucolater (dia) 2.20m. The job including central bearing assembly shaft and MS wheels. Stop wheels and deflector draft tube fabricdated out of MS Sheet with proper prtoraction as per site requirement, including placing in postion with adequiate rotating prime movers 3 phase 440 vlot 50 Hz incuding fly sheel and MS rail on fish plate grouted on top bse of floculator in cement concret. the job includes, providing and installation of 3 phase cubical electrical panel 63 Amp capacity with approprriate roting 3 phse MCCB/OCB and panel of electrical motors incl. connecting with electrical PVC copper cable and on poll system. the jb inc. fabrication and fitting of scrapper blades fabricated out of 50x50x6mm angle and 3mm thick sheet including assembly with rotatry system and central shaft. the job including providing of paddle blades on the central shaft assembly fabricated out of 50x50x6mm angle above the draft tube. |
| 67 | Providing and fixing of MS Rotatry bridge fabricatee IS 50x50x6mm angle suitable for bearing silt load of clarifier (dia 4.40m). The Job incuding central bearing assembly shaft and MS Sheels, stop wheels and detlector draft tube fabricatd out of MS sheets with proper Proforation as per site requirement, including placing in position with adequate rotating prime mover 3 phase 440 volt 50 Hz including fly wheel and MS Rail on fish plate grouted on top base of clarifier in cement concrete. The Job includes providing and installation of 3 phase cubical electrical panel 63 Amp capacity with appropriate rating 3 phase MCCB/OCB and panel of electrican motors incl. connecting with electrical PVC copper blades fabricated out of 50x50x6m angle & 3mm thick sheet incl. assembly with rotating system and central shaft. |
| 68 | Providing & Fixing & 50mm dia PVC pipe for orifices in PST, Fludden & clarifier for collection of water in channels (20+20+10) = 50 No's |
| 69 | Providing & Fixing & ROF (Rate of flow metre) including assembly & Testing |
| 70 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shades, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). Size of tile 600x600 mm |
| 71 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete |
| 72 | Providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer’s specification. (1 kg of water proofing material in 50 kg of cement) |
| 73 | Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) 80 mm dia. nominal bore Medium |
| 74 | Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) 50 mm dia. nominal bore (Light) |
| 75 | Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) 15 mm dia. nominal bore (Light) |
| 76 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, lead upto 50 m and lift upto 1.5 m |
| 77 | Providing and fixing on wall face un-plasticized - PVC moulded fittings/accessories for un plasticized Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. 110 mm bend |
| 78 | Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) 100mm dia (Medium) (for washout/delivery main/welded with MS plate thick 100x100mm size and for suction pipe) |
| 79 | 6MM CEMENT PLASTER 6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand |
| 80 | Cement plaster skirting upto 30cm height with cement mortar 1:3 (1 cement: 3 coarse sand), finished with a floating coat of neat cement and curing complete. 11.8.1 18 mm thick |
| 81 | Welding, including transportation of plant at site etc. complete By electric plant |
| 82 | Carriage of Sand consisting of inert and durable sand grains frees of clay, loams and orgamioc matter of effective size of 0.25 mm to 0.35mm with uniform coefficient of 3.0 -5.0 from road side to site of work and stone aggregate upto 20mm by Manual Means from road side (to be identified by engineer in charge) to site of work/dumping place (To be identified by engineer in charge) including cost for loading and unloading.for an av. distance of 300m (Head load) |
| 83 | Carriage of graded stone agg. (Filter Media) of size 1.0 -1.5mm, 4-6mm, 15-25mm in four layers (Nallah) including carriage from source (to be identified by engineer in charge) to site of work /dumping place (To be identified by engineer in charge)including cost for loading and unloading.for an av. distance of 300 mtr Head Load |
| 84 | Carriage of GI pipe by from source (to be identified by engineer in charge) including cost for loading and unloading.for an av. distance of by manual means from road side avg distance 500 mtr Head load |
| 85 | Carriage of Cement by Manual means from road side to site of work including cost for loading, unloading. and stacking for an av. distance of 300 mtr |
| 86 | Carriage of Steel by Manual means from road side to site of work including cost for loading, unloading. and stacking for an av. distance of 300 mtr |
| 87 | Carriage of Sand by Mechanical Transport from source (to be identified by engineer in charge) to road side including cost for loading and unloading.for an av. distance of 25 km & by manual means from road side avg distance 300 mtr |
| 88 | Carriage of Soling stone/ boulders from source (to be identified by engineer in charge) for an average distance of 750 Mtr Head Load |
| 89 | Carriage of stone aggregate (Crushed) above 20 mm by Mechanical Transport from source (to be identified by engineer in charge) to road side including cost for loading and unloading.for an av. distance of 15 km & by manual means from road side avg distance 300 mtr |
| 90 | Carriage of Bricks by Mechanical Transport from source (to be identified by engineer in charge) to road side including cost for loading and unloading.for an av. distance of 80 km & by manual means from road side avg distance 300 mtr |
| 91 | Erection of electrification i.e. LED light 15 W, 2 No Fan, 01 No. fuse box, Main switches with complete wiring including allied accessories of approved brand as per BIS Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 09, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 14, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedJul 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
TodayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender