Tender For Construction Of One Generic Medicine Counter In Dhalai District Hospital, Kulai/Sh:- Construction Of Single Storied Building Including Plumbing Works.
Tender Value
15.03 Lakhs
Estimated cost
Bid Submission
06 Jul 2026
4 days left
EMD
30071
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dhalai → Tripura
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of One Generic Medicine Counter In Dhalai District Hospital, Kulai/Sh:- Construction Of Single Storied Building Including Plumbing Works.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means(Hydralic exvator)/ manual in foundation trenches or drains (not exceeding 1.5 m, in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil |
| 2 | Filling available excavated earth(excluding rock) in ternches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m. All kinds of soil |
| 3 | Supplying and filling in plinth, under floor, foundations etc. with sand(fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or any suitable method complete. |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering All work upto plinth level: 1:3:6 ( 1 Cement:3 fine sand : 6 Graded stone aggregate 20 mm nominal size) |
| 5 | Making plinth protection 50 mm thick of cement concrete 1:3:6 ( 1 cement: 3 fine sand: 6 Graded well burnt brick aggregate 20 mm nominal size) over 75 mm bed of dry brick ballast 40 mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. |
| 6 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttaring, finishing and reinforcement -All work upto plinth level. i) 1: 1 ½ :3 ( 1 Cement: 1 ½ fine sand: 3 Graded stone aggregate 20 mm nominal size) |
| 7 | Reinforced cement concrete work in walls(any thickness), including attached pilasters, buttresses, plinth and skirting courses, fillets, columns, pillars,piers, abutments, posts and struts etc. upto floor five level excluding cost of centring, shuttaring, finishing and reinforcement. 1: 1 ½ :3 ( 1 Cement: 1 ½ fine sand: 3 Graded stone aggregate 20 mm nominal size) |
| 8 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement RCC work in suspended floors, roofs having slope upto15° landings, balconies, shelves and chajjas 1: 1 ½ :3 ( 1 Cement: 1 ½ fine sand: 3 Graded stone aggregate 20 mm nominal size) |
| 9 | Reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe- 500D or more. |
| 10 | Reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo-Mechanically Treated bars of grade Fe- 500D or more. |
| 11 | Centering shuttering including struttings, propping etc. and removal of form work for. |
| 12 | a) Foundations, footings, bases for columns etc. for mass concrete with 12 mm timber plank. |
| 13 | b) Suspended floors, roofs, landings, balconies and access platform with 12 mm thick shuttering ply. |
| 14 | c) Lintels, beams, plinth beams, girders, bressumers and cantilevers with shuttering ply. |
| 15 | d) Columns, pillars, piers, Abutments, posts and struts with shuttering ply. |
| 16 | f) Weather shade, Chajjas, corbels etc. including edges. |
| 17 | First class brick work in foundation and plinth including cost of all materials as required complete. |
| 18 | a) In cement mortar 1:4(1 cement: 4 fine sand) |
| 19 | b) In cement mortar 1:6(1 cement: 6 fine sand) |
| 20 | Half brick masonry work with first class bricks insuperstructure upto floor five level including cost of allmaterials as required complete. In cement mortar 1:4(1 cement: 4 fine sand) |
| 21 | Extra for providing & placing in position 2 nos 6mm diaMS bars at every 6th course of full brick masonry workincluding anchorage in joints of 75mm in each side insuperstructure for all level including cost of all materials as required complete In cement mortar 1:4(1 cement: 4 fine sand) |
| 22 | Providing wood work in frames of doors, windows,clerestory windows and other frames, wrought framed and fixed in position Local Teak Wood |
| 23 | Providing and fixing ISI marked flush door shuttersconforming to IS: 2202 (Part I) decorative type, core ofblock board construction with frame of 1st class hardwood and well matched teak 3 ply veneering withvertical grains or cross bands and face veneers onboth faces of shutters 35 mm thick including ISI marked Stainless Steel butthinges with necessary screws. |
| 24 | Providing and fixing M.S. grills of required pattern inframes of windows etc. with M.S. flats, square or roundbars etc. all complete Fixed to openings /wooden frames with rawl plugsscrews etc |
| 25 | Providing 40 × 5 mm flat iron hold fast 40 cm longincluding fixing to frame with 10 mm diameter bolts,nuts and wooden plugs and embedding in cementconcrete block 30 × 10 × 15 cm 1:3:6 mix (1 cement : 3fine sand : 6 graded stone aggregate 20mm nominalsize) |
| 26 | Providing and fixing IS : 1341 marked M.S. heavyweight butt hinges with necessary screws etc.complete a) 125 x 90 x 4.00 mm |
| 27 | Providing and fixing ISI marked oxidised M.S. door latches comforming to IS:5930 with screws etc. complete. a) 300 x 20 x 6 mm |
| 28 | Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete. a) 250 x 10 mm |
| 29 | Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete a) 125 mm |
| 30 | Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete Single rubber stopper |
| 31 | Providing and fixing bright finished brass 100 mm mortice latch and lock ISI marked with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles with necessary screws etc. complete (Best make ofapproved quality) |
| 32 | Providing and fixing IS : 3564 marked Aluminium die cast body tubular type universal hydraulic door closer with necessary accessories and screws etc. complete |
| 33 | Providing and fixing IS : 3564 marked aluminium extruded section body tubular type universal hydraulic door closer with double speed adjustment with necessary accessories and screws etc. complete |
| 34 | Providing and fixing fan clamp type-I of 16 mm dia M.S. bar bent to shape with hooked ends in R.C.C slabs during laying including painting the exposed portion of loop, all as per standard design complete |
| 35 | Steel work welded in built up section/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using steel etc. complete as required:- In grating, frames, guard bar, railing, brackets, gates andsimilar works, all complete |
| 36 | Providing and fixing M.S. round holding down bolts with nuts and wahser plates complete as per standard design |
| 37 | Providing and fixing hand rail using structural steel etc. of approved size by welding etc. to steel ladder railing, balcony railing and staircase railing etc. including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer complete as required G.I.pipes. |
| 38 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up of gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, run free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/paneling, C.P. brass/stainless steel screws, all complete as per architectural drawing and the direction of Engineer-in-charge.(Glazing and paneling and dash fasteners to be paid for separately) a)For fixed portion of approved quality. Anodised aluminium ( anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) |
| 39 | b) For shutters of doors, windows & ventilators including providing and fixing hinges/pivots and making provision for fixing fittings wherever required including the cost of EPDM rubber/neoprene gasket required(Fittings shall be paid for separately) Anodised aluminium ( anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) |
| 40 | Providing and fixing glazing of approved quality in aluminium doors, windows, ventilator, shutters and partition etc with EPDM rubber/neoprene gasket etc. complete as per architectural drawing and the direction of the Engineer-in-charge ( Cost of snab beading shall be paid in basic item a) With float glass panes of 4.0 mm thickness ( Weight not less than 10.0 kg/ Sqm |
| 41 | Providing and fixing stainless steel ( SS 304 grade ) adjusable friction window stay of approved quality with necessary stainless steel screws etc. to the side hung windows etc. complete as per direction of the Engineer-in-charge . a ) 205x19 mm |
| 42 | Providing and laying ceramic floor tiles in different sizes ( thickness to be specified by the manufacturer ) of 1st quality conforming to IS : 15622-2017 of approved make in colours such as white, Ivory, grey, Fume, Red Brown, laid over 20mm thick cement mortar 1: 4 ( 1 Cement: 4 fine sand ) jointing with grey cement slury @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc. complete . Mat Finish Tiles/ Anti-skid Tiles/ Glossy Tiles 600 mm x 600 mm in all shades and designs 1st classquality ceramic floor Porcelain tiles |
| 43 | Providing and fixing 1st quality ceramic glazed wall tiles ( minimum 200x300) conforming to IS : 15622-2017 ( thickness to be specified by the manufacturer ) of approved make in all colours, shades of any size as approved by the Engineer-in-charge in skirting ,riser of steps and dados, laid over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 fine sand ) joined with ordinary cement slury including pointing with white cement mixed with pigment of matching shade complete450 mm X 300 mm in all shades and design |
| 44 | Providing and fixing precast chequered cement concrete tiles 18 mm thick, laid in footpath & courtyard, on 20 mm thick bed of cement mortar 1 : 4 ( 1 cement : 4 fine sand ) jointed with neat cement slurry including rubbing and cleaning complete as per direction of the Engineer-in-charge.In dark shade using ordinary cement |
| 45 | Providing and laying cement concrete 1:2:4 (1 cement: 2 fine sand : 4 graded stone aggregate) flooring finished with a floating coat of neat cement including cement slurry, rounding of edges and strips and cost of glass strips etc. complete 40 mm thick with 20 mm stone aggregate |
| 46 | 12 mm cement plaster of mix |
| 47 | In cement mortar 1:4(1 cement : 4 fine sand) |
| 48 | In cement mortar 1:6 (1 cemnt : 6 fine sand) |
| 49 | 15 mm cement plaster on the rough side of single or half brick wall of mix. In cement mortar 1:6 (1 cemnt : 6 fine sand) |
| 50 | 6 mm cement plaster of mix. In cement mortar 1:3 (1 cemnt : 3 fine sand) |
| 51 | Net cement punning |
| 52 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 grams/ litre, of approved brand and manufacture to give an even shade [Payment shall be made after submission of Test Certificate issued by the Manufacturer] :New work ( two or more coats) over and including water thinnable priming coat with cement primer. |
| 53 | Finishing walls with water proofing cement paint ofrequired shade of approved brand and manufacture(payment shall be made after submission of Test Certificate issued by the Manufacturer) new work ( two or more coats applied @ 3.84 kg/10 sqm). |
| 54 | Applying priming coat (payment shall be made after submission of Test Certificate issued by the Manufacturer) With ready mixed pink or Grey primer of approved brand andmanufacture on wood work ( hard & soft wood ). |
| 55 | With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel, galvanised iron/ steel work. |
| 56 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade (payment shall be made after submission of Test Certificate issued by the Manufacturer) Two or mora coats on new work. |
| 57 | Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings. Flat back wash basin of size 630x450mm. |
| 58 | Providing and fixing P.V.C. waste pipe for sink or washbasin including P.V.C. waste fittings complete |
| 59 | Semi rigid pipe 32 mm dia |
| 60 | Flexible pipe 32 mm dia |
| 61 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Circular shape 450 mm dia. |
| 62 | Providing and fixing 600x120x5mm glass shelf with edges round of supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. |
| 63 | Providing and fixing toilet paper holder CP brass |
| 64 | Providing and fixing PMPT towel rail complete with brackets fixed to wooden cleats with CP brass screws with consealed fitting arrangements of approved quality and colour 600mm long towel rail with total length of 645mm, width78mm and effective height of 88mm, weighing not lessthan 190gms. |
| 65 | Providing and fixing PMPT soap Dish holder having length of 138 mm, breadth 102 mm, height of 75 mm with consealed fitting arrangements weighting not less than 106 gms . |
| 66 | Providing and fixing on wall face unplasticised Rigid PVC rain water soil, waste & vent pipes ( Working pressure 6 kg/cm2 ) conforming to IS 13592 Type A includng jointing with seal ring conforming to IS 5382 leaving 10mm gap for thermal expansion Single socketed pipe - 110 mm OD |
| 67 | Providing and fixing unplasticised- PVC pipe clips of approved design to unplasticised - PVC rain water soil, waste & vent pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S screws of required length including cutting brick work and fixing with cement mortar 1:4 ( 1 cement : 4 fine sand ) making good to the wall etc a) 110 mm |
| 68 | Providing and fixing on wall face unplasticised- PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water , soil, waste & vent pipes conforming to IS : 13592 type A including jointing with seal ring conforning to IS :5382 leaving 10 mm gap for thermal expansion |
| 69 | i) Coupler a) 110 mm |
| 70 | ii) Single equal tee without door 110x110x110 mm |
| 71 | iii) Single equal tee with door 110x110x110 mm |
| 72 | iv) Bend 87.5 ' 110 mm |
| 73 | v) Plain shoe 110 mm |
| 74 | vi) Terminal guard 110 mm |
| 75 | Providing and fixing G I pipes of medium class as per IS :1239 with latest amendment complete with G.I fittings and clams, including cutting and making good to the walls etc. complete as per CPWD specification and direction of the Engineer-in-charge.Internal work- Exposed on wall |
| 76 | a) 15 mm dia nominal bore |
| 77 | b) 20 mm dia nominal bore |
| 78 | c) 25 mm dia nominal bore |
| 79 | Making connection of G.I distribution branch with G.I main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete a) 25 to 40 mm nominal bore mm dia nominal bore |
| 80 | Providing and fixing brass bib cock of approved quality 15 mm nominal bore |
| 81 | Providing and fixing brass stop cock of approved quality 15 mm dia nominal bore |
| 82 | Providing and fixing gun metal gate valve with C.I wheel of approved quality ( Screwed end ) 25 mm nominal bore |
| 83 | Providing and fixing gun metal non-return valve of approved quality ( Screwed end ) 25 mm nominal bore Vertical |
| 84 | Providing and placing on terrace ( at all levels ) polythene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and over flow pipes but without fittings and base support of tank . |
| 85 | Painting G.I pipes and fittings with synthetic enamel white paint over a ready mixed primimg coat, both of approved quality for new work . |
| 86 | a) 15 mm diameter pipe . |
| 87 | b) 20 mm diameter pipe . |
| 88 | c) 25 mm diameter pipe . |
| 89 | Painting G.I pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality . |
| 90 | a) 15 mm diameter pipe . |
| 91 | b) 20 mm diameter pipe . |
| 92 | c) 25 mm diameter pipe . Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysJul 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 days