Tender For Periodic Maintenance Of Kandi To Saruht Uprala Km 0/000 To 8/000 Under Annual Maintenance Plan For The Year 2026-27 (Hp0408vr0064) Village Road In Distt. Kangra(H.P.) (Sh:-Providing And Laying 30Mm Thick Bitumen Concrete With Paver Finishe
Tender Value
14.05 Lakhs
Estimated cost
Bid Submission
09 Jul 2026
7 days left
EMD
28150
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kangra → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Periodic Maintenance Of Kandi To Saruht Uprala Km 0/000 To 8/000 Under Annual Maintenance Plan For The Year 2026-27 (Hp0408vr0064) Village Road In Distt. Kangra(H.P.) (Sh:-Providing And Laying 30Mm Thick Bitumen Concrete With Paver Finisher Complete In Km 7/000 To 8/000 )
BOQ
| Sl. No. | Item Description |
| 1 | Providing, laying and rolling of built-up spray grout layer over prepared base consisting of a one layer composite construction of crushed coarse aggregates using motor grader for aggregates. Key stone chips spreader may be used with application of bituminous binder after each layer, and with key aggregates placed on top of the single layer to serve as a base, conforming to the line, grades and cross-section specified, the compacted layer thickness being 75mm (Seventy five millimetre) as per Technical Specification Clause 505 as per direction of Engineer-in-Charge including carriage of materials within all leads and lifts and other incidental. The rate inclusive of octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government and rectifying defects noticed within two years as per clause 35 (III) of standard bidding document. |
| 2 | Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.20 (Zero decimal two zero) to 0.25 (Zero decimal two five) kilograms per square metre on the prepared dry and hungry bituminous surface cleaned with Hydraulic broom as per MORD Technical Specification Clause 503 and as per direction of Engineer-Incharge including carriage of materials within all leads and lifts and other incidental. The rate inclusive of octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government and rectifying defects noticed within two years as per clause 35 (III) of standard bidding document. |
| 3 | roviding and laying 30mm (Thirty milimetres) thick bituminous concrete with 100-120 TPH batch type HMP (Hot Mix Plant) producing an average output of 75 tonnes (Seventy five) tonne per hour using crushed aggregates of specified grading, premixed with bituminous binder VG-10 (Viscosity grade-Ten) @ 5.4% to 5.6% (Five point Four to Five point Six) percent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 509 complete in all respect and as per direction of Engineer-Incharge including carriage of materials within all leads and lifts and other incidentals. The rate inclusive of octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government and rectifying defects noticed within two years as per clause 35 (III) of standard bidding document. |
| 4 | Providing and applying 2.5mm (Two point five millimetre) thick road marking strips (retro- reflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications and as directed by the Engineer-in-charge including carriage of material within all leads, lifts, height and other incidentals. The rate inclusive of octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government and rectifying defects noticed within two years as per clause 35 (III) of standard bidding document. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysJul 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 days