Tender For Up-Gradation Of Parks Of Vine Street, Park Drive And Birch Street In Malibu Town Under Ward 11 Municipal Corporation Gurugram
Tender Value
99.87 Lakhs
Estimated cost
Bid Submission
13 Jul 2026
0 days left
EMD
1.99 Lakhs
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gurgaon → Haryana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Up-Gradation Of Parks Of Vine Street, Park Drive And Birch Street In Malibu Town Under Ward 11 Municipal Corporation Gurugram
BOQ
| Sl. No. | Item Description |
| 1 | Air Swing: Providing designing and fixing air swing in pair of size 1150 x 900 x 1250 mm fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipes 40mm dia and 2.5 mm thick. All pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber. Pedals shall be made up of Nylon alloy with rounded edges to prevent any impact or injury. Seats and base plate cover to be made up from virgin LLDPE manufactured by rotational |
| 2 | 915 mm or 3 feet FencingANNEXURE-IITECHNICAL SPECIFICATIONS and DRAWINGS OF FENCETECHNICAL SPECIFICATION FOR FENCE AT MEDIAN/CENTRAL VERGE OF ROADOF HEIGHT 915 MM (3 FT)S. No Product/DescriptionItem 1: Fence as per drawing assembly:All system components as below will be fitted to provide the fence as given in the assembly drawing.The installation will be done as per the civil construction details given in the drawing for grouting thefence post.1 Weld Mesh Panels with Fitting Accessories:(a). Weld Mesh Panels:i. Weld Mesh Panels manufactured with electrical resistance welded galvanized wires andsubsequently powder coated as per specifications mentioned under.ii. Weld mesh panel for fence will meet the standards of IS 1566/ IS 4849 with the followingkey specificationsSpecifications and Rates as approved by GMDA and with MCG Logo |
| 3 | Horse Rider Station:- Providing, and fixing of horse rider station of size 1000 x 600 x 1100 mm make of Green Gym or Equivalent fabricated with main post of 140 mm dia and 3.0 mm thick rest of the pipes are 40mm dia and 2.5 mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Alczo Nobel or equivalent of 80-120 micron thick |
| 4 | Bridge Ladder: 10’L x 2’W x 6’H. Horizontalladder is of m.s pipe 2”, ¾” and vertical ladderis of same material of 12 gauge ISI markwith suitable PU Primer and PU Paints.Complete item with GST, Transportation,Installation with C.C and labor at site |
| 5 | -Wave Slide: 9’.5 L x 5’H. Wave slide is of molded Fiberglass Reinforced Plastic (FRP) of 6mm thick and climbing ladder is of m.s pipe 1” x 12 gauge and m.s rectangular pipe 65 x 25 mm box X 16 gauge as climbing steps which support with 1”.25 sq. pipe x 14 Guage with suitable PU Primer and PU Paints. Complete item with GST, Transportation, Installation with C.C and labor at site. |
| 6 | Leg Press: Providing designing and fixing of legpress of size 2000x550x1600 mm fabricated with main post of114mm dia and 2.5mm thick and rest of the pipes 40mm diaand 2.5mm thick. All pipes made up of hot rolled tubula |
| 7 | -Twister:- Providing, and fixing Twister of size 1700 X1300 X 1300 mmb make of Green Gym or Equivalentfabricated with main post of 140 mm dia and 3.0 mm thick restof the pipes are 40mm dia and 2.5 mm thick all pipes made upof hot rolled tubular steel and hot dipped galvanized, andpowder coated using Akzo Nobel or equivalent of 80-120micron thick |
| 8 | 6 No. Ornamental Canopy Design FRP pillar FRP base pedestal with vertical fitted design having base width of size 260mm x 260mm and height 900mm having 4 no. of size 15mm drilled in the base with hold fasts and having B class vertical m.s pipe of size 89 mm and height 2890mm, the central m.s pipe having FRP capital sign enclosed. Complete pillar suitably grinded spray primered and subsequently |
| 9 | Double Cross Walker/ Cross trainer double:- Providing, and fixing Double Cross Walker of size 1600 X 600 X 1600 mm make of Green Gym or Equivalent fabricated with main post of 140 mm dia and 3.0 mm thick rest of the G.I pipes are 40 mm dia and 2.5 mm thick all G.I pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of G.I pipes are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company like SKF to be approved by Officer -in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of G.I pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength N425 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc.` The rates are inclusive of all taxes like GST, Transportation, Installation in CC with 2 years defect liability period free of cost to full satisfaction of engineer in charge complete in all respect. |
| 10 | Rowing machine: Providing designing and fixing rowing machine of size 1280x800x1150 mm fabricated with main past of 114 mm dia and 2.5mm thick and rest of the pipes 40mm dia and 2.5 mm thick. All pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber Foothold shall be made up of nylon alloy with rounded edges to prevent any impact or injury and base cover to be made up from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic as 3mm colourful and UV resistant and environmental friendly. Bearing used shall be maintenance free duly oil sealed and self lubricated made by reputed company to be approved by Engineer in charge. Equipments to be fitted with inbuilt limiters to |
| 11 | Providing and laying 15mm thick synthetic jogging track EPDM (9mm SBR Crumb Rubber as track bottom Cushion Layer 6mm EPDM Colour Granules top layer) of approved make COLORSPACEF/COLORPLAY/BSG/NOVAL with test reports of certified NABL lab, origin Of EPDM USA and EUROPE and equivalent. EPDM Granules shall have following minimum properties 00 Polymer content)22%, (u) Hardness of 55-65 Shore A [per ASTM D2240): (ii) Tensile Strength of )5 MPa (per ASTM D412): (iv) Elongation )500% (as per ASTM D412): (v) Density of 1.6 kg/cum (per ASTM D792). (vi) High UVrating of 3-5 on grayscale, (vi) VOC less than 3.0.0ww/1 [viii] Combustibility less than40 mm /m: (ix) Anti-Microbial and Anti-Fungal Tested material, and shall be laid in three layers.[1] First step shall be theapplication of singlevcomponent Polyurethane based primer coating Layer, PU binder shallhave a specific gravity of 1.05 the appearance of clear pale yellowvand viscosity of 350-2900 cps and shall be from the original manufacturer from the list of approved makes2. The second layer shall be an impact attenuating cushion layer of 9mm thick black crumb rubber/SBR adhered with a polyurethane binder and PU binder shall have a specific gravity of 1.05: the appearance of clear pale yellow and viscosity of 350- 2900 cps and shall be from the original manufacturer from the list of approved makes of to form a resilient porous layer. Crumb rubber /SBR shall bemixed with a minimum of 14% -16% of single-component PU base binder so as to ensure that PU binder provides 100% coating of the Design on the base top layer by a specialized team of installersaccording to the specification of approved material and shade. The detailed technical specifications of EPDM flooring testing. material properties, application procedure, etc. are attached herewith for compliance. The documentary evidence has to be produced. for the procurement of material for manufacturer`s test certificate. An undertaking is to be furnished by the agency that surface system is tested EN 1177 For shock absorption report of SPORTS LAB approved by IAAF WORLD Athletics` company has not been World blacklisted byIAAF/Sports Authority of India/ Athletics `IAAF the means earlier `international Association of Athletics Federations or World Athletics now. The work shall be carried out by the manufacturer`s approvedapplicator and the prospective bidder should produce a letter from the approved strictly to manufacturer prior to submission of bid and satisfaction of the technical specifications SBR/crumb rubber particles. The third step shall be laying a 6mm 18% binder of single EPDM GRANULES top layer with at minimumcomponent polyurethane and shall provide 100% coating of the EPDM granules particles |
| 12 | Up-gradation of parks of vine street, Park Drive and Birch street in Malibu Town under Ward 11 Municipal Corporation Gurugram Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayJul 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
TodayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender