Tender For special Repair To Bldg No.T-737 And T-750 At 345 Fd Regt, Bldg No. T-108 And T-113 At 38 repair renovation And Bldg No. T-135 At 275 Coy Asc(Sup) At Tangtse Under Ge 860 Ews.
Tender Value
47.64 Lakhs
Estimated cost
Bid Submission
21 Jul 2026
15 days left
EMD
95500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Leh → Ladakh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Bldg No.T-737 And T-750 At 345 Fd Regt, Bldg No. T-108 And T-113 At 38 repair renovation And Bldg No. T-135 At 275 Coy Asc(Sup) At Tangtse Under Ge 860 Ews.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.Note: Taking down carefully old FTL fitting recessed mounted light fittings/ceiling complete with all accessories and making necessary electric connection, complete all as specified & directed by Engr-in charge. |
| 2 | M&L for 9mm Pre-laminated particle board, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws/nails to timber frame work in wall portion complete all as specified and directed. |
| 3 | S&F grid false ceiling GI system powder coated prelude (Main runner sec 32x24x0.30x3600mm,Cross Tee 25x24x0.30x1200 mm, wall angle 24x24x0.40x3000mm and including providing and fixing PVC pre laminated aluminium foil backed Gypsum tile of size 595x595x9mm thick fixed in ceiling frame work suspended by GI wire complete all as specified and as directed by Engr-in-Charge |
| 4 | Dismantling of timber scantling in fillets, posts, rafters, purlins etc under 40Sq. Cm in section in framed work complete all as specified and directed. |
| 5 | M&L for 2nd class hard wood timber scantling plain fillets square, rectangular in section area exc 13 Sqcm and not exc 25sqcm secured with nails complete all as specified and directed. |
| 6 | M&L for 2nd class soft wood fillets sectional area exc 3 sqcm and n exc 6 sqcm rectangular or triangular in section but bullnosed, splayed, chamfered or rounded on one edge of face, secured with nails or brads, complete all as specified and as directed. |
| 7 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 8 | M&L for Coloured Non Skid Ceramic joint free tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm , in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed 15mm thick in CM 1:4 complete all as specified and directed. |
| 9 | M&L for coloured light shade Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15 mm thick screed bed or bedding of cement mortar (1:4) complete all as specified and directed. |
| 10 | Dismantling boarding, any description, fixed in any position with nails |
| 11 | M&L for SDC laminated flooring 8 mm thick of any coloured manufactured by direc pressure laminated (DPL) wherein the emply Abrasive aluminium oxide overly alongwith metamine impregnated decorated film is directly fused with the back with flooring locking profile in designed with double click locking system on the length and single locking width alongwith desire locking strength complete all as specified and directed by Engr-in-Charge. |
| 12 | Hacking out old broken of glaass from wooden frame or steel frames or stone concrete or brick with putty or fixed with nail complete all as specified and directed. |
| 13 | S&F sheet glass, ordinary quality, 4 mm thick, in squares exc 0.50 Sqm in each pane and glazing with oil putty/wooden bedding complete all as specified and directed. |
| 14 | Dismantling of plain or corrugated steel sheeting any gauge thickness including nainital or similar pattern roof covering/wall complete all as specifed and directed. |
| 15 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws having EPDM washer complete all as specified and directed.Note :- Coruugated Sheet type to be approroved by the Engr-in-Charge |
| 16 | Taking down shutters of any description exc 2.00 sqm sqm each and removing form site. |
| 17 | S&F 30 mm Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides and covered with decorative face on both sides veneer with lipping/frame to match complete all as specified. |
| 18 | S&F of 100mm size, butt hinges, cold rolled steel or stainless steel with screw, medium weight , ISI marked complete all as specified and directed. |
| 19 | S&F 125mm long Aluminium, anodised, barrel tower bolt, Mild steel or stainless steel having dia/shoot not less than 10 mm with screws complete all as specified and directed. |
| 20 | S&F 125mm size, extruded aluminium alloy handles fabricated type anodised complete all as specified and directed. |
| 21 | S&F in 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed |
| 22 | Demolition of cement concrete (un-reinforced) in ground floors & paving n.exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 23 | M& L for cement concrete 75mm thick type D - 2 using 40mm graded stone aggregate as in sub base to receive floor finish etc complete all as specified and as directed. |
| 24 | M&L Screed bed or bedding layer 20 mm thick in cement mortar 1:4 on floors for laying floor finish complete all as specified and as directed. |
| 25 | S&F coloured chequrred cement concrete tiles 30 cm x 30cm x 25 mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment complete all as specified and as directed. |
| 26 | M&L for providing cement concrete 1:2:4, type B-1 using 20 mm graded aggregate for fixing edges of chequered tiles and rounded or chamfered edges, coping complete all as specified and directed. |
| 27 | M & L for preparation of old painted steel surfaces of any description not otherwise described over 10 cm width or girth and aplying Two coat of Synthetic enamal paint of any type complete all as specified and directed by Engr-in-Charge. |
| 28 | S&F 0.50 mm thick plain galvanised mild steel sheeting, in ridges, hips, valley gutter, drip and straight flashings fixed with L- type or J type or cranked hook bolts and washers with grade of zinc coating 275 complete all as specified and directed. |
| 29 | S&F in repairs vitreous china water closet (squatt pan) orrisa pattern 580x440 mm size pan white with front or back inlet with integral 'foot rests including provn of lime concrete bedding including connections to 'flushing cistern/pipe including 100mm PVC 'P' trap complete all as specified and directed. |
| 30 | S&F in repair PVC 10 Ltrs valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete with 32 mm dia flush pipe connecting to squatt pattern etc. ISI approved etc complete all as specified and directed by Engr-in-Charge. |
| 31 | S&F in repairs 32mm Dia PVC waste pipe with fly nut, coupling for sinks/urinals or wash basins etc. complete all as specified and directed. |
| 32 | S&F 15 mm bore stop valves, cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 33 | S&F in repair 15 mm bore bib tap brass chromium plated fancy type with crutch or butterfly handle screwed down, screwed for iron pipe complete all as specified and directed. |
| 34 | S & F in repairs for Vitreous China bowl type urinals, size of 465x355x265mm white(minimum) with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (excluding of fixing supply pipe, flushing cistern, flush pipe, trap) including waste pipe complete all as specified and directed by Engr-in-Charge. |
| 35 | S&F in repairs 15mm bore pillar taps CP brass chromium plated fancy type screwed down high pressure with chromium plated screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed. Make : Cera/Prayag/Jaquar |
| 36 | S&F in repair of soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed by Engr-in-Charge. Make : Cera/Prayag/Jaquar |
| 37 | S & F PVC connections 15mm dia with brass nut on both ends and washers 450mm long all as specified and directed. |
| 38 | S&F in repair towel rail 450 mm long of PTMT fixed with and including chromium plated brass screw and wooden / plastics cleats ( min wt 170 gms) |
| 39 | S&F in repairs 600mmX450mm bevelled edge mirror 5 mm thick of selected quality glass, mounted on 6mm thick AC building board or comercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washer complete all as specified and directed. |
| 40 | S&F in repair vitreous china wash hand basin including brackets, white size 550 x 400 mm incl cutting for and pinning in ends of brackets including waste fittings, brass chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other and fixed complete all as specified and directed. |
| 41 | S&F in repair Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Chief |
| 42 | M&L for plain cement concrete (1:3:6) type C-2 (using 40mm graded crushed stone aggregates) 75 mm thick as in plinth protection/PCC Path complete all as specified and directed. |
| 43 | Taking down chowkats and frame exc 1.5 Sqm but n.exc 4.00 sqm each including shutter wiuthout taking off shutter from the frame and removing from site. |
| 44 | S & F as in door or gates of angle or other section with gusset plate , rail braces etc complete drilled for fixing of steel sheeting or other covering , doors etc to be prepared for hanging or sliding with and inclu either hooks and hinges or steel hanging door fittings ( exclusive of steel , sheeting or other covering , running rails and guisides ) and hanging also fastening and fixing complete |
| 45 | S&F 1 mm thick mild steel plain black sheet in hearths, covering to door chowkhats (frames) chullah hoods, water tanks , water troughs, ducts,urinal trough and funnels etc , cut to size,edge beaded if directed, holes punched , including round headed screws,clout nails or rivets and fixed to wood or steel members, etc with plain 40 mm lap joints or welded /riveted seams including bending, turning up,mitred angles, stopped ends, outlets etc as required |
| 46 | S & F 100mm long stainless steel Heavy weight but hinges for welded to Iron door shutters and frames complete all as specified and as directed.. |
| 47 | M & L for preparing new steel surfaces of any description, over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 48 | M&L for 0.63mm thick CGI sheets fixed to wall/roof with two corrogations side lap, fixed with L- type or J type or cranked hook bolts and washers with grade of zinc coating 275 complete all as specified and directed. |
| 49 | M&L for two coat of synthetic enamel paint over a coat of red oxide on new steel surfaces of any description, not otherwise described over 10cm width or girth incl preparing new zinc or galvanised surfaces to receive painting by coating with mordant solution incl washing and cleaning etc completed all as specified and directed. |
| 50 | M & L for preparation of old painted steel surfaces of any description not otherwise described over 10 cm width or girth and aplying one coat of Synthetic enamal paint of any type complete all as specified and directed by Engr-in-Charge. |
| 51 | M&L for plain cement concrete (1:3:6) type C-2 (using 40mm graded crushed stone aggregates) 75 mm thick as in plinth protection/PCC Path complete all as specified and directed. |
| 52 | Taking down chowkats and frame n.exc 1.5 Sqm each including shutters without taking off shutters from the frame and removing from site. |
| 53 | S&F in repair steel windows with side hung shutters including Projecting type hinges with steeel handle and steel peg stay complete with Glazing bars Dovetailed and welded. |
| 54 | Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 |
| 55 | Material and labour for preparation of new steel and iron surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primere complete all as specified. |
| 56 | S&F Sheet glass of size 5.5mm thick ordinary quality and glazing with beads fixed with metal panel pins/neoprene beadings size of pane/parition n.exc 0.5 sqm in each |
| 57 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as inroof covering/cladding to wall, fixed with self tapping screws as specified |
| 58 | M& L Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry andpointed in white or coloured cement to match including screed bed 15mm thick in CM 1:4 complete all as specified and directed. |
| 59 | Taking down carefully copper/aluminum point wiring (light, fan, socket or power) complete with fittings and fixtures such as switches, ceiling roses, pendants, regulators, socket, lamp holders brackets, bulk head fittings, tube light fittings etc complete and removing all retrieved materials such as fitting & fixture from the site and also making good disturbed surfaces of wall, floors etc all as specified and as directed by the Engineer-in-Charge. |
| 60 | Material and labour for point wiring with 1.5 Sqmm copper conductor (Multi-standard) PVC insulated and unsheathed electric cable 1100 volts in and including 25 mm and above (as per conductor run )with all fittings/ accessories and including PVC insulated and unsheathed electric cable 1100 volts1.5 Sqmm ( multi-stranded) copper conductor single core( Green colour) cable as continuous earth wire connected to common earth dolly including 50 mm deep box made of 2nd class hard board of required size and shape etc covered with 3 mm thick plastic laminated sheet ( Make Hylum) for one light point,bell,exhaust point, bulk head, independent controlled by one, one way switch complete all as specified and as directed by the Engineer-in-Charge. |
| 61 | Description all as per item No 60.00 here-in-before but for one 3 pin socket outlet 5 Amp on same board complete all as specified and as directed by the Engineer-in-Charge. |
| 62 | Description all as per item No 60.00 here-in-before but for one 3 pin socket outlet 5 Amp on independent board complete all as specified and as directed by the Engineer-in-Charge. |
| 63 | Description all as per item No 60.00 here-in-before but for one socket outlet 15 Amps on independent board with 2.5 Sqmm copper conductor (Multi-stranded) insulated and unsheathed electric cable 1100 volts (ISI Marked) including PVC insulated and unsheathed electric cable 1100 volts 1.5 Sqmm copper stranded conductor as continuous earth wire connected to common dolly complete all as specified and as directed by Engineer-in-Charge. |
| 64 | Supply and fixing in replacement switch piano flush button single pole one way 5 Amps complete all as specified and as directed by Engineer-in-Charge.(Make:Anchor / SSK / Leader) |
| 65 | Supply and fixing in replacement socket outlet 2 in 1, 5 Amp, flush type completeall as spe cified and as directed by Engr-in-charge. |
| 66 | Supply and fixing in replacement switch, socket combination 2 in 1, 5 Amp, flush type completeall as specified and as directed by Engr-in-charge. |
| 67 | Supply and fixing in replacement switch socket combination multi purpose 2 in 1, 3 pin 5A/16A, 5 in 1 flush type complete all as specified and as directed by Engr-in-charge. |
| 68 | Supply and fixing in replacement angular lamp holder, PVC/Polycaronate type with back plate suitable for 09 watt LED bulb for batten fittings complete all as specified and directed by the Engineer-in-Charge. |
| 69 | Supplying and fixing in replacement LED 09 Watt complete all as specified and directed by Engr-in-Charge. |
| 70 | Supply and fixing in replacement ceiling rose, surface bakelite, 65 x 50 mm, three terminals complete all specified and as directed by the Engineer-in-Charge. |
| 71 | Supply and fixing in replacement LED batten lights fitting 1x 20W, 220V,AC decorative type including LED tube light connecting up with three core flexible copper conductor cable of suitable size including ceiling rose complete. |
| 72 | Supply and fixing new energy saving LED Bulk head fitting 10 watt made up of pressure die cast aluminium housing with acrylic cover as diffuser with IP 66 protection and impact resistance of IK07 as reqd to be mounting bracket in wall/floor to suit the opening of the fitting with FI clamp, nut, bolt and washers of suitable size including making connection complete all as specified and as directed by Eng-In-Charge Please Enable Macros to View BoQ information |
| 73 | Supply and fixing new energy saving LED Bulk head fitting 10 watt made up of pressure die cast aluminium housing with acrylic cover as diffuser with IP 66 protection and impact resistance of IK07 as reqd to be mounting bracket in wall/floor to suit the opening of the fitting with FI clamp, nut, bolt and washers of suitable size including making connection complete all as specified and as directed by Eng-In-Charge Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysJul 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender