Tender For Restoration Of Kendriya Vidyalaya, Left Bank, Balutar At Teesta-V Power Station.
Tender Value
4.31 Crore
Estimated cost
Bid Submission
21 Jul 2026
16 days left
EMD
8.62 Lakhs
Bank guarantee accepted
Document Fee
1770
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
sikkim → Sikkim
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Restoration Of Kendriya Vidyalaya, Left Bank, Balutar At Teesta-V Power Station.
BOQ
| Sl. No. | Item Description |
| 1 | Removal of unserviceable soil from closed space/room by manual means including excavation and disposal upto 100 metres lead. |
| 2 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. |
| 3 | Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead |
| 4 | Earthwork in excavation by mechanical means(Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5m, including getting out the excavated soil and disposal of surplus excavated soil.as directed, within a lead of 50m- All kinds of soil. |
| 5 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead : For thickness of tiles 10 mm to 25 mm. |
| 6 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : of area 3 sq. metres and below. |
| 7 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 8 | Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead : 100 mm dia pipe. |
| 9 | Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in-Charge. |
| 10 | Dismantling of flushing cistern of all types (C.I./ PVC/ Vitreous China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. |
| 11 | Disposal of building rubbish/ malba/ similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 12 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineerin-Charge. With cement mortar 1:4 (1 cement : 4 fine sand). |
| 13 | Providing and Laying first class brick work in one brick thick in superstructure of standard size bricks with 1:5 cement mortar (1 cement and 5 clean coarse sand) as per the direction of Engineer in Charge including curing etc all complete. |
| 14 | Providing and laying first class brick work in half brick thick in superstructure of standard size bricks with 1:4 cement mortar (1 cement and 4 course sand) including carriage of bricks upto work site, curing etc all complete. |
| 15 | Providing and Laying in position cement concrete of specified grade including compacting curing etc all complete. 1:4:8 mix. (1cement, 4 coarse sand, 8 graded stone aggregate of 40mm & down size) |
| 16 | Providing and Laying in position specified grade of reinforced cement concrete excluding the cost of form work, finishing and reinforcements : 1:1.5:3 Mix (1cement, 1.5 coarse sand 3 graded stone aggregate 20mm and down nominal gauge). |
| 17 | Providing, fixing & removing form work for casting R.C.C items as indicated below: with locally available timber):Foundation, footings, base of column etc for mass concrete. |
| 18 | Providing, fixing & removing form work for casting R.C.C items as indicated below: with locally available timber : Beam, lintels, girders, brersumers and cantilevers. |
| 19 | Providing, fixing & removing form work for casting R.C.C items as indicated below: with locally available timber): Square columns |
| 20 | Supplying, bending and placing in position tor steel reinforcement in all R.C.C works including cost of binding wires, all complete. |
| 21 | Providing and laying hand packed stone filling in building works with clean hard selected stones, all complete. |
| 22 | Filling with available excavated earth in trenches, plinth and side of foundation in building works with layers not exceeding 20cm in depth including consolidation of each layer by ramming, watering etc, all complete. |
| 23 | Providing and Laying 12mm thick cement plaster of specified mix in single coat including finishing even and smooth and curing etc all complete. 1:4 mix. |
| 24 | Providing and Laying 15mm thick cement plaster of specified mix in single coat including finishing even and smooth and curing etc all complete. 1:4 mix. |
| 25 | Providing & Laying white or colored glazed vitrified tiles of Orient/ Somani or equivalent colour in flooring, treads of steps landing etc. laid on a bed of 15mm, cm 1:3 (1cement, 3coarse sand) finished with flush pointing with white cement slurry. |
| 26 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete : Size of Tile 800x800 mm |
| 27 | Removing dry oil bond distemper by scrapping, sand papering and preparing the surface smooth including repairs to scratches etc. complete. |
| 28 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 29 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : Water thinnable cement primer. |
| 30 | Providing and painting with plastic Emulsion paints one or more coats on Old surface of required shade to give an even shade including brushing the surface clean of all dirt dust and smoothened by sand paper etc complete. |
| 31 | Providing and painting with acrylic exterior paints of quality and make equivalent to EXCEL, WEATHER SHIELD to give an even shade including brushing the surface clean of dirt, dust etc. and sand papering and filling the scratches complete on New surface. |
| 32 | Providing, fitting and fixing of dressed sal timber in all types of frames complete. With locally available timber |
| 33 | Providing hold fast of (40x5)mm flat iron including fixing to frame with 10mm dia. Bolts nuts and timber plugs and embedding in CC 1:3:6 (1 cement, 3 coarse sand, 6 graded stone aggregate 20mm nominal size) block of size (30x10x15)cm as per the direction of Engineer - in- Charge all complete: |
| 34 | Providing fitting and fixing in position of fully panelled shutters in windows and doors of champ timber or equivalent including steel butt hinges screws 12mm thick panels etc. complete. 32 mm thick panel door. |
| 35 | Providing hold fast of (40x5)mm flat iron including fixing to frame with 10mm dia. Bolts nuts and timber plugs and embedding in CC 1:3:6 (1 cement, 3 coarse sand, 6 graded stone aggregate 20mm nominal size) block of size (30x10x15)cm as per the direction of Engineer - in- Charge all complete: |
| 36 | Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with inbuilt roller track and sash extruded profiles duly reinforced with 1.6 plus/minus 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg). G.I fasteners 100 * 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 * 44 mm & sash 32 * 60 mm both having wall thickness of 1.9 plus/minus 0.2 mm and single glazing bead of appropriate dimension (Area of window upto 1.75sqm) |
| 37 | Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes. |
| 38 | Providing and applying priming coat with ready mixed pink on timber work including preparation of the surface by thoroughly cleaning and sand papering etc. complete. |
| 39 | Providing and applying priming coat with ready mixed Red oxide, Zinc chromate primer on steel/ galvanized Iron steel works including preparation of the surface complete. |
| 40 | Providing and painting with ready mixed paint of approved quality and shade with two or more coats to give an even and smooth shade including clearing the surface complete on new surface. |
| 41 | Providing and painting with ready mixed paint of approved quality and shade with two or more coats to give an even and smooth shade including cleaning the surface complete on old surface. |
| 42 | Providing, fitting and fixing. Tower bolts 250x10 mm with necessary screw etc complete. (M.S) |
| 43 | Providing and fixing Tower bolt 200x10 mm with necessary screws etc complete. (M.S) |
| 44 | Providing, fitting and fixing sliding door bolts with nuts and screws etc. complete. MS 250x16mm Size (Bright Finish) |
| 45 | Providing and Fixing Hydraulic door closer with accessories and screws complete. |
| 46 | Providing, fitting and fixing handles 125 mm size with necessary screws etc. complete. M.S |
| 47 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. Complete : Single rubber stopper. |
| 48 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 40 mm nominal outer dia Pipes |
| 49 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 25 mm nominal outer dia Pipes |
| 50 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 20 mm nominal outer dia Pipes |
| 51 | P/F stain less steel kitchen sink with CI brackets, CP brass chain with rubber plug 40mm CP brass waste, CP brass tap etc complete i/c the fittings, cuttings and making good the wall wherever required. 610 x 450 x 200 mm. |
| 52 | Providing, fitting and fixing white vitreous white china wash flat back basin with CI brackets, painted, 15mm CP brass pillar taps, CP brass chain with rubber plug. 32mm CP brass waste pipe, lead or PVC connection 32mm dia CP brass cap and unions, complete including cutting and making good the walls wherever required. HINDWARE. One wash basin with one pillar cock. 63 cm x 45 cm |
| 53 | Providing and Fitting Pedestal white colour for of Hind Vitreous wash basin complete. |
| 54 | Providing, fitting and fixing. white vitreous china water closet (W.C) squatting pan (Indian type) 580mm size with 100mm SCI (Sand cast iron) P or S trap, 10 ltr low level flushing cistern with fittings, CI brackets, 32mm flush pipe with fittings and clamps, 20mm overflow pipe, cutting and making good the wall and floor etc complete. Long type or Orissa type pan. Orissa PAN 58x44 White CAT NO 20042 |
| 55 | Providing and fixing European water closet with seat cover 70x36x75 83cm Cat no:20050 (Starwhite) HINDWARE or equivalent, conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : |
| 56 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 10 litre capacity - White. |
| 57 | Providing and fitting chromium plated toilet paper holder including the making holes and fixed to timber cleats with CP screws washer etc. all complete:. |
| 58 | Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 59 | Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. |
| 60 | Providing, fitting and fixing towel ring of chromium plated brass complete with CP brass screw and timber cleats. |
| 61 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. |
| 62 | Providing, Fitting and fixing Chromium plated fittings of approved quality and size complete: (ESCO ORIGINAL)(i) BIB COCK 15 MM DIA |
| 63 | Providing, Fitting and fixing Chromium plated fittings of approved quality and size complete: (ESCO ORIGINAL) ANGULAR STOP COCK 15 MM DIA |
| 64 | Providing, Fitting and fixing Chromium plated fittings of approved quality and size complete: (ESCO ORIGINAL) CONNECTING PIPE |
| 65 | Supplying, fitting and fixing shower of approved brand and make. Hand Shower (Health Faucet) with 1mtr Flexible Tube with Wall Hook (Equivalent to Code No.573 & Model -ALLIED of Jaquar or similar). |
| 66 | Providing, fitting and fixing soil, waste and vent pipes including testing etc complete. (i) 100 mm dia. PRINCE/ SUPREME or equivalent soil pipe |
| 67 | Providing, fitting and fixing soil, waste and vent pipes including testing etc complete. (i) 75 mm dia. PRINCE/ SUPREME or equivalent soil pipe |
| 68 | Providing and fixing white vitrous China Flat back or wall corner type Lipped front urinal basin 430*260*350 mm 340*410*265 mm size respectively |
| 69 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite stone slab colour black, Cherry/ Ruby red. Area of slab over 0.50 Sqm |
| 70 | Providing, fitting and fixing in position collapsible steel shutter with vertical channel (20x10x2) mm and braced with flat iron diagonals (20x5) mm size with top and bottom rail of T-iron (40x40x6) mm with 40 mm dia steel pulley complete with bolts, nuts, locking arrangements, stoppers and handles including applying of priming coat of approved steel primer as per the direction of Engineer- in- Charge all complete: |
| 71 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position all complete. |
| 72 | Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily : Glazed Vitrified tiles Matt/Antiskid finish of size : Size of Tile 800 x 800 mm |
| 73 | Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). Dark shade pigment using ordinary cement |
| 74 | Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in- charge. Made of G.I. wire of dia. 4 mm, PVC coated to achieve outer dia not less than 5 mm in required colour and shade. |
| 75 | Providing and Laying in position cement concrete of specified grade including compacting curing etc all complete. 1:2:4 mix. (1 cement, 2 coarse sand, 4 graded stone aggregate of 20mm & down size). |
| 76 | Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3 mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/ litre and viscocity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc, and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 650/ 450N/ 5cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane : 3 mm thick |
| 77 | Providing, fitting, fixing of 24 BWG Pre-painted HULAS sheet roofing with lapping of 150mm (two corrugation) with G.I. hooks, bolts and nut 8mm dia with bitumen, GI limpet washers filled with white bad including carriage all complete |
| 78 | Providing, fitting fixing ridges or hips of 60 cm overall width of plain 24 BWG Pre-painted HULAS Sheet fixed with G.I, J or L hooks bolts and nuts 8mm dia Limpets, Bitumen washers complete. |
| 79 | Providing, fitting and fixing 23 cm deep 24 BWG Pre-painted HULAS sheet eaves board including (50mmx25mm) dressed sal timber beading and M.S. Rod brackets all complete. |
| 80 | Providing and fixing 15cm wide semicircular PVC gutter with iron brackets, bolts, nuts, washers etc. including making, connection with rain water pipes all complete. |
| 81 | Supplying, fabricating, fitting and fixing steel tubular trusses including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shape washer etc as per the standard specification and design and direction of Engineer - in- Charge all complete. |
| 82 | Planting Permanent Hedges including Digging of Trenches (Planting permanent hedges including digging of trenches, 60 cm wide and 45cm deep, refilling the excavated earth mixed with farm yard manure, supplied at the rate of 4.65 cum per 100 metres and supplying and planting hedge plants at 30 cm apart) |
| 83 | Providing and laying Neelgiri/Mexican grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and light waterning with sprinkler and maintenance for 30 days or more till the grass establish properly, as per direction of officer-in-charge. |
| 84 | Planting Flowering Plants and Shrubs in Central Verge |
| 85 | Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality LD : Rectangular shape 600x450 mm internal dimensions |
| 86 | Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 87 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre,, excluding the cost of painting with :PVC ceiling panel with different size and pattern as approved by the Engineer- in-charge and as per manufacturer's specification. |
| 88 | Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with inbuilt roller track and sash extruded profiles duly reinforced with 1.6 plus/minus 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg). G.I fasteners 100 * 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 * 44 mm & sash 32 * 60 mm both having wall thickness of 1.9 plus/minus 0.2 mm and single glazing bead of appropriate dimension (Area of window upto 1.75sqm) |
| 89 | Providing and installation of wall panelling made of Timber (Pinewood or equivalent) panel (Tongue and Groove panelling) with minimum size of 127 x 12 mm with Furring Strips as framework system with provision of wainscotting at the top and skirting and base shoe at the bottom with necessary nails, screw, etc including varnishing on the finished surface all complete as per drawing and direction of the Engineer incharge. |
| 90 | Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1) cement: 2 coarse sand: 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth. Granite Stone of approved shade. |
| 91 | Trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, by spreading and neatly levelling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or / and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure). |
| 92 | Supplying and stacking of good earth at site including royalty and carriage upto 5 km lead complete (earth measured in stacks will be reduced by 20% for payment). |
| 93 | Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge. |
| 94 | Providing and Displaying Royal Palm 120 to 150 cm ht., well developed 12 and above good color fresh and healthy leaves as per direction of the officer-in-charge. |
| 95 | Edging with bricks laid dry length wise, including required excavation, refilling, consolidating with hand packing and spreading surplus earth neatlywithin a lead of 50 m : Common burnt clay F.P.S (non modular) bricks of Class designation 7.5. |
| 96 | Supplying & Stacking of Selection No.1 doob grass turf at site fresh & free from weeds having proper roots in green including loading, unloading, carriage and all taxes paid etc. and as per direction of officer in charge. |
| 97 | Lights Fittings Confirming to (CPWD/NBC/Relevant IS & BIS code), LED Aluminium Battens (Tube Light) Fittings : supply and Erection of LED Tube Light 22 watt 4 FT |
| 98 | Lights Fittings Confirming to (CPWD/NBC/Relevant IS & BIS code), LED Aluminium Battens (Tube Light) Fittings : supply and Erection of LED Tube Light 12 watt 2 FT |
| 99 | Lights Fittings Confirming to (CPWD/NBC/Relevant IS & BIS code), LED Aluminium Battens (Tube Light) Fittings : supply and Erection of LED Lamp 12 watt |
| 100 | Lights Fittings Confirming to (CPWD/NBC/Relevant IS & BIS code), LED Aluminium Battens (Tube Light) Fittings : supply and Erection of Surface mounted down light 16W |
| 101 | LED Flood Lights Conforming To IS: 16101, supply and Erection of LED Flood Light 72 Watt |
| 102 | Fan Conforming To (CPWD/NBC/Relevant IS & BIS code), Supply and Erection of Ceiling fan 1200mm 48\\" |
| 103 | Switch Sockets & Accessories Modular conforming to (CPWD/NBC/Relevant IS & BIS code), Supply and Erection of Dimmer rotary 60-400W 1 module. |
| 104 | Fan Conforming To (CPWD/NBC/Relevant IS & BIS code), Supply and Erection of Heavy Duty Exhaust Fan 12\\" |
| 105 | Switch Sockets & Accessories Modular conforming to (CPWD/NBC/Relevant IS & BIS code), Supply and Erection of Socket 06 amps 5 pin 2 module universal |
| 106 | SWITCH SOCKETS & ACCESSORIES MODULAR CONFORMING TO (CPWD/NBC/RELEVANT IS&BIS CODE), Supplying and erection of 06 amps switch 1 way 1 module |
| 107 | Switch Sockets & Accessories Modular conforming to (CPWD/NBC/Relevant IS & BIS code), Supply and Erection of Socket Socket 6/16 amps 2 module |
| 108 | SWITCH SOCKETS & ACCESSORIES MODULAR CONFORMING TO (CPWD/NBC/RELEVANT IS&BIS CODE), Supplying and erection of Switch 16 amps 1 module |
| 109 | P.V.C. CASING CAPING, P.V.C. CONDUIT PIPE, M.S. CONDUIT PIPE, JUNCTION box,& Alkathine pipe misc items (CPWD/NBC/Relevant IS & BIS code) , Supply and Erection of Angle Holder |
| 110 | P.V.C. CASING CAPING, P.V.C. CONDUIT PIPE, M.S. CONDUIT PIPE, JUNCTION box,& Alkathine pipe misc items (CPWD/NBC/Relevant IS & BIS code) , Supply and Erection of Ceiling rose |
| 111 | P.V.C. CASING CAPING, P.V.C. CONDUIT PIPE, M.S. CONDUIT PIPE, JUNCTION box,& Alkathine pipe misc items (CPWD/NBC/Relevant IS & BIS code), Supply and Erection of PVC Round box |
| 112 | P.V.C. CASING CAPING, P.V.C. CONDUIT PIPE, M.S. CONDUIT PIPE, JUNCTION box,& Alkathine pipe misc items (CPWD/NBC/Relevant IS & BIS code), Supply and Erection of PVC Junction Box 20mm dip |
| 113 | SWITCH SOCKETS & ACCESSORIES MODULAR CONFORMING TO (CPWD/NBC/RELEVANT IS&BIS CODE), Supplying and erection of Metal flux box(2 module) |
| 114 | SWITCH SOCKETS & ACCESSORIES MODULAR CONFORMING TO (CPWD/NBC/RELEVANT IS&BIS CODE), Supplying and erection of White plate with frame(2 module) |
| 115 | SWITCH SOCKETS & ACCESSORIES MODULAR CONFORMING TO (CPWD/NBC/RELEVANT IS&BIS CODE), Supplying and erection of Metal flux box(3 module) |
| 116 | SWITCH SOCKETS & ACCESSORIES MODULAR CONFORMING TO (CPWD/NBC/RELEVANT IS&BIS CODE), Supplying and erection of White plate with frame(3 module) |
| 117 | SWITCH SOCKETS & ACCESSORIES MODULAR CONFORMING TO (CPWD/NBC/RELEVANT IS&BIS CODE), Supplying and erection of Metal flux box(4 module) |
| 118 | SWITCH SOCKETS & ACCESSORIES MODULAR CONFORMING TO (CPWD/NBC/RELEVANT IS&BIS CODE), Supplying and erection of White plate with frame(4module) |
| 119 | SWITCH SOCKETS & ACCESSORIES MODULAR CONFORMING TO (CPWD/NBC/RELEVANT IS&BIS CODE), Supplying and erection of Metal flux box(6 module) |
| 120 | SWITCH SOCKETS & ACCESSORIES MODULAR CONFORMING TO (CPWD/NBC/RELEVANT IS&BIS CODE), Supplying and erection of White plate with frame(6 module) |
| 121 | SWITCH SOCKETS & ACCESSORIES MODULAR CONFORMING TO (CPWD/NBC/RELEVANT IS&BIS CODE), Supplying and erection of Metal flux box(8 module) |
| 122 | SWITCH SOCKETS & ACCESSORIES MODULAR CONFORMING TO (CPWD/NBC/RELEVANT IS&BIS CODE), Supplying and erection of White plate with frame(8 module) horozontal |
| 123 | SWITCH SOCKETS & ACCESSORIES MODULAR CONFORMING TO (CPWD/NBC/RELEVANT IS&BIS CODE), Supplying and erection of Metal flux box(12/16 module) |
| 124 | SWITCH SOCKETS & ACCESSORIES MODULAR CONFORMING TO (CPWD/NBC/RELEVANT IS&BIS CODE), Supplying and erection of White plate with frame(12 module) horozontal |
| 125 | Switch Sockets & Accessories Modular conforming to (CPWD/NBC/Relevant IS & BIS code), Supply and Erection of blank plate 1 module |
| 126 | Wiring with PVC Insulated (FRLSH) Single Core Multi Stand Copper Conductor Voltage Grade upto 1100V Confirming to (CPWD/NBC/Relevant IS & BIS code) in best quality recessed alkathine pipe : Wiring for light/fan/call bell & 6 A plug point with 2x1.5 sqmm FRLSH PVC insulated copper conductor single core cable in in best quality recessed alkathine pipe and earthing the point with 1x 1.5 sqmm FRLSH PVC insulated copper conductor single core cable as required. |
| 127 | Wiring with PVC Insulated (FRLSH) Single Core Multi Stand Copper Conductor Voltage Grade upto 1100V Confirming to (CPWD/NBC/Relevant IS & BIS code) in in best quality recessed alkathine pipe: Wiring for 16 A plug point with 2x2.5 sqmm FRLSH PVC insulated copper conductor single core cable inin best quality recessed alkathine pipe and earthing the point with 1x 2.5 sqmm FRLSH PVC insulated copper conductor single core cable as required. |
| 128 | Wiring with PVC Insulated (FRLSH) Single Core Multi Stand Copper Conductor Voltage Grade upto 1100V Confirming to (CPWD/NBC/Relevant IS & BIS code) in in best quality recessed alkathine pipe: Wiring for sub main for light/fan/call bell & 6 A plug point with 2x2.5 sqmm FRLSH PVC insulated copper conductor single core cable in in best quality recessed alkathine pipe and earthing the point with 1x 2.5 sqmm FRLSH PVC insulated copper conductor single core cable as required. |
| 129 | Wiring with PVC Insulated (FRLSH) Single Core Multi Stand Copper Conductor Voltage Grade upto 1100V Confirming to (CPWD/NBC/Relevant IS & BIS code) in in best quality recessed alkathine pipe: Wiring for sub main for 16 Amps(2*1000w) plug point with 2x4.0 sqmm FRLSH PVC insulated copper conductor single core cable in in best quality recessed alkathine pipe and earthing the point with 1x 4.0 sqmm FRLSH PVC insulated copper conductor single core cable as required. |
| 130 | Wiring with PVC Insulated (FRLSH) Single Core Multi Stand Copper Conductor Voltage Grade upto 1100V Confirming to (CPWD/NBC/Relevant IS & BIS code) in in best quality recessed alkathine pipe: Wiring for sub main with 2x6.0 sqmm FRLSH PVC insulated copper conductor single core cable in in best quality recessed alkathine pipe and earthing the point with 1x 6.0 sqmm FRLSH PVC insulated copper conductor single core cable as required. |
| 131 | MCB DISTRIBUTION BOARD CONFORMING TO (CPWD/NBC/RELEVANT IS&BIS CODE): Supplying and erection of MCB DB (Single pole & neutral) single door 8 Way |
| 132 | MCB DISTRIBUTION BOARD CONFORMING TO (CPWD/NBC/RELEVANT IS&BIS CODE): Supplying and erection of MCB DB (Triple pole & neutral) single door 12 Way |
| 133 | MCBS CONFORMING TO (CPWD/NBC/RELEVANT IS&BIS CODE): Supplying and erection ofMiniature Circuit breakers (MCB) Single pole 240V 6 - 32 Amps |
| 134 | RCCB CONFORMING TO (CPWD/NBC/RELEVANT IS&BIS CODE): Supplying and erection of Residual current circuit breaker(RCCB) four pole 415v 63A 30mA |
| 135 | MCBS CONFORMING TO (CPWD/NBC/RELEVANT IS&BIS CODE): Supplying and erection ofMiniature Circuit breakers (MCB) Four pole 63A |
| 136 | Supplying and erection of cables 1.1kv grade PVC insulated aluminium armoured conductor cable(Havells Make).3 1/2 core 50 sqmm |
| 137 | ALUMINIUM THIMBLES LONG BARREL FOR XLPE CONDUCTORS CONFORMING TO IS:8309, Supplying and erection of Aluminum thimble ring 50sqmm |
| 138 | Supplying and erection of L.T distribution switch board with aluminum bus bar, out-door type Kiosk, having electrolytic annealed Aluminum bus bar 50x12mm for phase & 50x6mm for neutral circuits mounted on glazed porcelain or Bakelite base & fitted with voltmeter, ammeter, selector switches for ammeter & voltmeter, electronic KWH meter, indicating lamps cabin light, fabricated with 12 gauge M.S plain sheet, painted with anti- rust primer & two coats of Epoxy paint of shade 631 as per IS: 8623-1, front opening doors with gasket & locking arrangement complete with following incoming & outgoing controls: LTDB 100 A INCOMING: 1 No. 100 A, 4P,50KA, MCCB OUTGOING: 3 Nos. 63A TP MCCB, 35 KA, & 1 No. 32A TP MCCB, 35 KA all with built in Thermo Magnetic Release |
| 139 | Supplying and erection of cables 1.1kv grade PVC insulated aluminium armoured conductor cable(Havells Make).3 1/2 core 50 sqmm |
| 140 | ALUMINIUM THIMBLES LONG BARREL FOR XLPE CONDUCTORS CONFORMING TO IS:8309, Supplying and erection of Aluminum thimble ring 50sqmm |
| 141 | Supplying and erection of Safe Earthing Model T-19 Short Current 20KA RMS For 1 Sec (LV/MV) Application Conforming to IS:3043 : 50mm diameter x 2 mtrs Electrode (Copper bounded) & One Bag backfill chemical compound. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysJul 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender