Tender For Establishment Of Pasteurized Compost Making Unit (Capacity 35 Mt) At Newly Alloted State Land Kakapora, District Pulwama (Public Sectro) Under Hadp Project Promotion Of Round The Year Mushroom Cultivation 2025-26 (Electro-Mechanical Part)A
Tender Value
25.33 Lakhs
Estimated cost
Bid Submission
14 Jul 2026
12 days left
EMD
50660
Bank guarantee accepted
Document Fee
1100
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pulwama → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Establishment Of Pasteurized Compost Making Unit (Capacity 35 Mt) At Newly Alloted State Land Kakapora, District Pulwama (Public Sectro) Under Hadp Project Promotion Of Round The Year Mushroom Cultivation 2025-26 (Electro-Mechanical Part)Advertised Cost=₹25.331 Lacs (Amount Without Gst=21.467 Lacs, Gst Amount=03.864 Lacs)
BOQ
| Sl. No. | Item Description |
| 1 | Supply, Installation, Testing and Commissioning of Blowers with blower capacity 1200 CFM against static pressure of atleast 200 mmwg with automatic control panel that includes motor starter and single phase preventor of suitable type and timer to control the run time of the blower as per the phase 1 composting requirements plus other controls necessary for the process. The job also includes connecting the blower to the main circulation GI ducts and then with the HDPE/PVC pipes laid in the bunker floor complete with necessary fittings like elbows, sockets, isolation valves as per site requirements. Suitable dampers at the discharge end also need to be provided for isolation purpose. The job also includes laying of suitable cable as recommended for the motor from the main panel to the blower/control panel in suitably sized PVC conduits to be fixed on the floor/wall as per site conditions. Further, the job includes construction of concrete pedestal for mounting of the blower and canopy of suitable size. The job is inclusive of the cost on account of material, labour, and all tools and tackles required for the completion of the job. (1 standby). The job also includes the construction of RCC padestal (dimensions as per blower size and base plate requirement with the height of 3ft min from floor ) to elevate, securely mount and fasten the blowers. |
| 2 | Supply, Installation, Testing and Commissioning of belt driven blower with motor, blower capacity 7500 CFM against static pressure of atleast 200 mmwg, impeller size not less than 18”, one number automatic control panel that includes motor starter (fully automatic) of suitable type, single phase preventor, timer for fan operation, automatic damper actuator that controls the damper opening with respect to the tunnel temperature, damper for fresh air supply and other controls required for Phase 2 composting process. The job also inlcudes the cutting of suitable window at the top of the tunnel for connection with the blower for recirculation of inside air. The job also includes providing and fitting of elbow duct with air filters (HEPA) for fresh air inlet and connecting the blower with the plenum chamber of the pasteurization tunnel. The job also includes laying of suitable cable as recommended for the motor from the main panel to the blower/control panel in suitably sized PVC conduits to be fixed on the floor/wall as per site conditions. Further, the job includes construction of concrete pedestal for mounting of the blower and canopy of suitable size. The job is inclusive of the cost on account of material, labour, and all tools and tackles required for the completion of the job. (1 standby). The job also includes the construction of RCC padestal (dimensions as per blower size and base plate requirement with the height of 3ft min from floor ) to elevate, securely mount and fasten the blowers. |
| 3 | Supply, Installation, Testing and Commissioning of Microprocessor/PLC based Temperature, Humidity control system. Complete job including hardware,((Minimum 3 Sensors each (Industrial Grade, suitable for harsh environment)),electric fitting, required for the successful completion of the job. The sensors so installed shall enable the blowers to regulate their operation as per the process requirements with respect to damper opening, run time of blowers etc. The controller must be capable of processing inputs from high accuracy temperature and humidity sensors. the controller shall support advance communication protocols. All components shall be industrial grade. The complete job includes cost of material, labour, tools and tackles reqd for completion of job and taxes. |
| 4 | AIR DISTRIBUTIONRECTANGULAR GI DUCT FACTORY MADEGSS Ducting:‐ Supplying fabrication installation testing and commissioning of GI. Sheet metal ducting. Zinc coated. Complete with all Standard Accessories, G.I..Hardware, Self Adhesive elastomeric foam gasket, support etc as per SMACNA specification.Sheet Thickness - 1.00 mm |
| 5 | SITC of Air Outlets and DampersAluminium volume control dampers as required. |
| 6 | Louvers but without volume control dampers complete as required. |
| 7 | Supply, Installation, Testing and Commissioning thermal insulation to supply/return air ducting with 19mm thickness nitrile rubber with 0.6 mm Al Cladding. |
| 8 | Supply, Installation, Testing and Commissioning of Non IBR Steam Generator of capacity 100 kg/hr (Vertical type, Oil fired Boiler, fully automatic). The boiler shall be coil assemby type consisting of helical type made of high temperature resistan tubes enclosed in duly insulated MS shell complete with monoblock burner with its controls. The boiler should be fitted with feed water pump coupled with drive motor assembly & pre-wired dust protected control panel. The job is inclusive of providing, fitting & testing of fuel & feed water line complete. All mountings, fiitings, controls, safety interlocks should be provided on the boiler. The Job Includes p/f/t MS day oil tank of 200 ltr capacity & tank thickness of 5mm, having valves & level indicator job including hardwares complete.The job also includes p/f/t of 1000 litre HDPE water storage tank. The conecting pipeline from overhead water tank to boiler, softner to overhead tank is included in the job. The job is also inclusive of electrical work including cabling from main electric panel to boiler, PVC conduits etc required for the successful completion of the job. Further the job includes p/f/t of 1'' high pressure piping (20m length) to the blower discharge side and pasteurization tunnel. The complete job includes cost of material, labour, tools and tackles reqd for completion of job and taxes. |
| 9 | Supply, Installation, testing & commissioning of M.S. Straight Chimney, with ladder, base plate, nuts & bolts, template for foundation, foundation bolts etc., painted with heat resistant aluminium paint with flue gas ducting wall supporting, 6 mtrs height with diameter of 125 mm (or as per manufacturer's recommendation) and thickness 5mm and 3 mtrs connecting duct. |
| 10 | Supply, installation, testing & commssioning of softner plant with FRP body having a capacity of delivering 1000 ltrs per hour & presssure range 1.5 to 5 kgf/cm². The plant should be able to soften the available water at site & render it viable for use in circuit of bioler. The plant shall be complete with pump set, PVC brine tanks, resin filling tanks, valves & piping grid to deliver the contineous soft water. |
| 11 | Electrical WorksSITC of Control panel (6' X 5') of sheet metal 18 SWG, powder coated, vermin proof comprising of following of reputed make with internal wiring.Incomer:1. Incomer : MCCB 125A, 4 pole 36kA - 01 No: 2. Manual Changeover Switch 125 A , 4 Pole - 01 No: 2. Aluminum 250 A 4 Pole Bus Bar 3. Digital Voltmeter with Selector Switch - 01 set4. Digital Ammeter with Selector Switch & CT’s - 01 set5. Phase Indicator SetOutgoing feeders:1) Cubicle 1 - Comprising of 02 No: 32 A 4P MCB, 01 No: 16 A 4P MCB ( C type)2) Cubicle 2 - Comprising of 03 No:, 16 A 4P MCB (C type)3) Cubicle 3- Comprising of 01 No: 2P 63A MCB, 02 No: 2P 32A MCB, 06 No: 1P 16A MCB4) Spare Cubicle 01 No. |
| 12 | Electrical fitting by way of Providing, fitting and testing of 10 no. 20 watt LED light, 1 no. ceiling fans, 1 no. exhaust fan 18”dia and 100 W LED outdoor/flood lights- 6 nos. Job also includes Providing of laying of main service line 3.5 core XLPE Al, armoured PVC sheathed 70 sq. mm (approx 40m length) from electric substations to Main MCCB B box inside the shed. It also includes providing of 2.5 sq.mm XLPE Cu wire (40m length) and 1.5 sqmm XLPE Cu wire (180 m length) for heating and lighting respectively. The job further includes p/f/t of modular switches and sheet, modular 5A/6A Socket, modular 32A socket, PVC conduits etc. for completion of the job. The job includes material cost , tools and tackles, labour cost and taxes.Any other electrical item required for the completion of job shall be in the scope of the firm/ contractor |
| 13 | Supply, installation, and commissioning of GI earth pipes (4.5 m long, 40 mm dia.) for blowers & other electrical equipments, complete with necessary accessories such as clamps, fasteners, and connection hardware. Each earthing point will feature a masonry enclosure with a lockable cover plate and a watering pipe for maintenance, with trenches backfilled using a charcoal/coke and salt mixture to enhance conductivity. |
| 14 | Supply & Fixing of 25 mm x 5 mm GI strips will be provided and fixed to extend the earthing connection from the earth electrodes to the respective blower control panels, with the strips laid on the surface or in recess through protective PVC conduits to prevent mechanical damage and corrosion. |
| 15 | Supply, installation, testing & commissioning of 3 Phase- 30 kVA servo-stabilizer including oil and all allied electrical acessories with earthing.The stabiliser should have following specifications:a) Capacity: 30 kVA, 3-phase unbalanced typeb) Input: (100-265) V AC P-N; (180 - 460) V AC P-Pc) Output: 415 V ± 1% - phase to phase d) Supply: 3 phase, 4 wires, 50Hze) Operation: Automaticf) Duty cycle: Continuousg) Transformer windings: Copper wound on CRGO laminations as per IS specificationsh) Cooling: Oil cooledi) Efficiency: Better than 98% at full loadj) Overload capacity: 15% for continuous 4 hoursk) Waveform distortions: Nill) High speed voltage correction: up to 8V to 20V per secondm) Protections: Under voltage, Over voltage and Overload with time delayn) Other features: LED indicators, Digital AC ammeter, AC voltmeter, Frequency meters, Phase Sequence meters, Single phase preventer, Stabilizer by-pass arrangement. |
| 16 | Water Tanks and associated pumpsProviding and fitting of triple layer HDPE storage tank with cover and suitable locking arrangement and making necessary holes for inlet and outlet pipes including overflow pipes having capacity of 10,000 ltr with foundation as per requirement, fittings, pipes required and base support. The job further includes p/f of 1 hp mono block self primer water pump along with 3/4 inch GI B Class piping (50 metres), PVC hose pipes & Sprinklers complete accessories and fittings including electrical fittings. The complete job includes cost of material, labour, tools and tackles and taxes thereof. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysJul 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 days