Tender For Maintenance Work On Banswara Ratlam Road
Tender Value
9.95 Lakhs
Estimated cost
Bid Submission
06 Jul 2026
5 days left
EMD
19900
Bank guarantee accepted
Document Fee
236
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jaipur → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Maintenance Work On Banswara Ratlam Road
BOQ
| Sl. No. | Item Description |
| 1 | Repair to pot holes and removal of loose material, trimming of sides, cleaning of surface by providing tack coat, 20 mm thick pre-mix carpet and seal coat type B as per MoRTH specification Clause 3004.2 |
| 2 | Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (PugMill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc. as per Tables 400-12 &400-13 and MoRTH Specification Clause 406 By Mechanical Means with a lead of 1 Km. For All Rajasthan except Bikaner, Churu, Hanumangarh and Sri Ganganagar |
| 3 | Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.20 to 0.30 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per MoRTH Specification Clause 503. |
| 4 | Providing and laying bituminous concrete with 100-120 TPH batch type hot mix plant producing an average out put of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder minimum @5.2&5.4 percent of mix and filler, transporting the hot mix to work site,laying with a hydrostatic paver finisher with sens or control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandemrollers to achieve the desired compaction as per MoRTH Specifications Clause 507complete in all respects For All Rajasthan except Bikaner and Sri Ganganagar. for Grading-I ( 19 mm nominal size ) Bitumen (VG-30) |
| 5 | Brick masonry work in cement mortar 1:3 in parapet excluding pointing and plastering as per drawing and MoRTH specifications Clauses 1300, 1500 |
| 6 | Stone masonry in cement mortar 1:3 for parapet complete as per drawing and MoRTH specifications Clauses 1400 including Weep holes as per MoRTH specifications Clauses 2706. Random rubble masonry |
| 7 | Plastering with cement mortar (1:3) 15 mm thick on brickwork in parapet as per MoRTH specifications Clauses 1312.4 |
| 8 | Providing and laying parapet with PCC M 15 as per drawing & MoRTH specifications Clauses 1700 & 2300 Nominal mix (1:2.5:5) |
| 9 | Painting Two Coats on New Concrete Surfaces Painting two coats including primer coat after filling the surface with synthetic enamel paint in all shades on new, plastered / concrete surfaces as per drawing and MoRTH Specification Clause 801 |
| 10 | Painting lines, dashes, arrows, etc. on roads in two coats on new work with ready mixed road marking paint conforming to IS:164 on bituminous/concrete surface, including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site and traffic control as per drawing and MoRTH Specification Clause 803 |
| 11 | Construction of speed breaker of IRC standard having width of 3.70M including cost of stone aggregate (50-25mm) size hire charges for roller for consolidation and compaction and other machines required for the work (including cost of bitumen) |
| 12 | Marking Centre Line and stop lines etc. on road as per IRC pattern with thermoplastic paint of approved quality and make with 8% glass beads laid on the road surface at temperature 160\\" C with a special applicator machine complete with a special applicator machine complete with labour material and traffic diversion arrangements |
| 13 | Repair of steel railing to bring it to original shape cleaning and repainting as per drawing and MoRTH specification Clause 1900. Steel Railing |
| 14 | Providing and erecting direction and place identification retro-reflectorised sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 801.3.1. fixed over aluminium sheeting, 2mm thick with area not exceeding 0.9sqm supported on a mild steel single angle iron post 75x75x6mm firmly fixed to the ground by means of properly designed foundation withM-15 grade cement concrete 450x450x600mm, 600mm below ground level as per approved drawing and MoRTH Specification Clause 801. Direction and Place Identification signs upto 0.9 sqm size board |
| 15 | Excavation for road work in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross-sections, and transporting to the embankment location with a lift up to 1.5 m and lead up to 1000 m as per MoRTH Specification Clause 301.3 |
| 16 | Supply of ready made cold bituminous mixture for pot hole patching in pot holes in accordance with IRC:116-2014 specifications with IRC:116-2014 spccifications with 5.6%MC-800 Cut back Bitumen and suitable anti stripping agent with all lead and lift in 50 kg plastic lined sturdy bags complete in all respect as perdirection of engincer-in-charge including all transportation, stacking & taxes etc |
| 17 | Placing and compacting ready made cold bituminous mixture in pot holes duly prepared in accordance with IRC:116-2014 with Specifications with all lead and lift for placement at site complete in all respect as per Direction of Engineer-in-charge including all taxes etc. |
| 18 | Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets Clause2905. 300 mm dia |
| 19 | Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300-1and300-2 with a lead upto 50m as per MoRTH Specification Clause 305.3 |
| 20 | Note:- GST will be paid extra as per applicable rules. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysJul 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 days