Tender For Renovation Of Inspection House At Nahal Jhal In Distt.- Ghaziabad.
Tender Value
94.34 Lakhs
Estimated cost
Bid Submission
06 Jul 2026
5 days left
EMD
1.89 Lakhs
Bank guarantee accepted
Document Fee
1888
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ghaziabad → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation Of Inspection House At Nahal Jhal In Distt.- Ghaziabad.
BOQ
| Sl. No. | Item Description |
| 1 | Distempring two coat with oil bound distemper of approved brand and manufacture and of required shade on undecorated wall surface to give an even shade over an including a priming coat cement primer of approved brand and manufacture such as Berger, J&N, Shalimar, Asian Paints after throughly brushing the surface free from mortar dropping and other foreign matters and also including preparing the surface even with plaster of Paris or approved synthetics material and sand papered smooth including cost of all materials. |
| 2 | Providing Wall Putty two coat / (2 mm thick) on new surface with approved quality material of JK / Birla brand or similar manufacture as per direction of engineer in chage etc. with all cost of material, labour and T&P etc. |
| 3 | Painting two coat over priming coat on steel or wood and other metal surface including cleaning the surface all dirt, dust and other foreign matter, sand papering and stopping including supply of all material, labour tools & Plant etc. required for proper completion of work. Paint shall be used as Asian or standart IS specification approved by Engineer-in-Charge. |
| 4 | Finishing wall with weather coat by premium acrylic exterior paint applied @ 1.67 ltr/10sqm (asian or berger brand ) of approved make and quality on wall with two or more coat to give an even shade i/c a priming coat with cement primer of approved brand and manufacturer exterior primer applied @ 2.20kg/10 sqm after throughly brushing the surface free from mortar drooping and other foregin matters and sand papered smooth i/c supply of all materials, labours, Tools & Plants etc. required for proper complection of the work. |
| 5 | Dismantling Brick work or Cement Concrete in cement work including disposal of materials as directed by Engineer-In-Charge within a distance of 60 meters. |
| 6 | Dismantling existing old Plaster and Racking of joints of brick work in cement or lime to a depth of 1 cm (3/8\\") Including disposal of refuse with in distance of 60 M with cost of all labour and T&P etc. complete. |
| 7 | Dismantling Doors and window leaves including stacking material with in 60 meter with cost of all labour and T&P etc. complete. |
| 8 | Dismantling Doors and window chaukhat with hold fast including stacking material with in 60 meter with cost of all labour and T&P etc. complete. |
| 9 | Providing & Laying C.C. 1:1.5:3 with cement,sand and stone grit of size 10 to 20 mm per cum including cost of all material, labour and T&P etc. complete. |
| 10 | 12.5 mm thick cement plaster in 1:4 cement coarse sand and water proofing pigment etc including cost of all material, labour and T&P etc. complete. |
| 11 | 12.5 mm thick cement plaster in ceiling above 3M height in 1:3 cement and coarse sand with water proofing pigment etc including cost of all material, labour and T&P etc. complete. |
| 12 | 20 mm thick cement plaster in 1:2 cement coarse sand and water proofing pigment etc for roof repairing including cost of all material, labour and T&P etc. complete. |
| 13 | Supply and fixing Vitrified tiles size 600x600x9.5mm or 10mm (Kajaria, Bell, Jonson & Jonson or Somani ) Double charge with Neno polish as approved colour/design by Engineering-in-charge) in 20 mm flooring with 1: 3 cement and approved coarse sand mortar finished with white cement slurry jointing and polishing complete including supply of all material, labour and T&P complete. |
| 14 | Supply and fixing of 4cm thick C.P. Teak wood fully panelled door and window shutters including supply and fixing of wooden cleats and stops and fitting excluding their supply of hinges, bolts, lockes handles springs and or other fittings but excluding their supply and including painting with two coats of black japan on all iron fitting if necessary, with cost of all material, labour and T&P etc. |
| 15 | Supply and fixing of 4 cm thick C.P. Teak wood Part panelled & Part Glazed door and window shutters including supply and fixing of wooden cleats and stops and fitting excluding their supply of hinges, bolts, lockes handles springs and or other fittings but excluding their supply and including painting with two coats of black japan on all iron fitting if necessary & including fixing the panes ( 5 mm th) with putty & brad. with cost of all material, labour and T&P etc. |
| 16 | Supplying of M.S. Pressed steel Chowkhat 18 gauge (1.25mm) including S/F of iron hings of 100x3 mm I.S.I. Mark with drilling holes for L- Drop and pipe 15 x12mm cleat for tower bolt and 40x6 mm hold fast 230 mm long including supply of all material labour T&P carriage upto site required for for proper completion of work. |
| 17 | Supply and fixing of SS Mosquito proof heavy quaility iron wire gauge or expended metal heavy quality over window and including supply of CP teak wood batten 8 Cm x 1 Cm flat Iron 25 mm x 4mm and including supply of necessary screws all materials, labour Tools & plant etc. required for for proper completion of work. |
| 18 | Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI marked with 6 levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) lever handles of approved quality with necessary screws etc. complete. |
| 19 | Providing and fixing aluminium hanging floor door twin rubber stopper, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) Transparent or dyed to required colour and shade, with necessary screws etc. complete. |
| 20 | Providing and fixing aluminium Tower Bolts size 300x 10mm, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) Transparent or dyed to required colour and shade, with necessary screws etc. complete. |
| 21 | Providing and fixing aluminium Handles 125 mm size, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) Transparent or dyed to required colour and shade, with necessary screws etc. complete. |
| 22 | Providing and fixing IS : 12817 Marked stainless steel butt hinges 125 x 64 x 2.5 mm (Heavy weight) with stainless steel screws etc. complete |
| 23 | Providing and fixing aluminium extruded section body tubulatr type universal hydralic door closer ( having brand logo with ISI, IS : 3564 embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 to 1000 mm with double speed adjustment with necessary accessories and steel screws etc. complete |
| 24 | Providing and laying Cement concrete (1:2:4) with cement , coarse sand , and 25mm to 10mm stone grit including cost of all material, labour and T&P etc.complete. |
| 25 | Providing and fixing PVC 110 mm dia pipe conforming to IS Make Working pressing 6 kg /sqcm including testing labour T&P and all complete fitting as per Direction of Engineer in Charge. |
| 26 | Uprooting jhunds including dressing and back filling. |
| 27 | Cleaning thick bushes & thorny jungle without uprooting with disposal |
| 28 | Brick work in 1:4 cement mortar on wall with cement , coarse sand , and M-100 bricks . including cost of all material, labour and T&P etc.complete. |
| 29 | Providing and laying Cement concrete (1:3:6) with cement , coarse sand , and 25 mm to 37.25 mm stone grit including cost of all material, labour and T&P etc.complete. |
| 30 | Providing & Laying R.C.C. 1:1.5:3 with cement,sand and stone grit of size 10 to 20 mm per cum including cost of all material, labour and T&P etc. complete. |
| 31 | Centering & shuttering for RCC work in etc including cost of all material labour and T&P complete. |
| 32 | Steel Reinforcement Work i/c Cutting, Bending, Binding & Placing of i/c cost of binding wire & Steelincluding cost of all material, labour and T&P etc.complete. |
| 33 | Laying of colour precast Interlocking tiles (colour & shape approved by Engineer-in-charge) of thickness 80 mm (Compressive strength not less then 30 Mpa and weight 5.0 kg) Including 25 mm thick local sand base levelling of Interlocking tiles ,dressing of surface to required level and slope, filling joints with local sand all complete work.etc. |
| 34 | Laying of Rubber Moulded Cement concete Kerb stone (colour & shape approved by Engineer-in-charge) ofsize 12'' x16\\" x 6\\" (Compressive strength not less then 30Mpa) Including 50mm thick local sand base levelling for Kerb stone and required level and slope, filling joint with neat cement and all complete work.etc. |
| 35 | Treatment of soil under existing floors using chemical emulsion @ one liters per hole 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1:2 (1 Cement : 2 coarse sand ) to match the existing floor as per direction of engineer in charge. |
| 36 | Antitermite treatment of along external wall where the apron is nor provided using chemical emulsion @ 7.50 ltr /Sqm of the vertical surface of the substructure to a depth of 300 mm including excavation channel along the wall & rodding etc. with Chlorpyriphos / Lindane E.C. 20% with 1 % concentration. |
| 37 | Providing & Fixing M.S. tubler frames for Doors, windows,ventilators and cupboard with rectangular/L-type sections, made of 1.6 mm thick M.S. sheet,joints mitred welded and grinded finish , with profiles of required size , including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. |
| 38 | Providing and fixing 18mm thick Granite Mirror Polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, winndow sills, facias and similar location, of required size more than 0.5 sqm, approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high glossy finish etc, including cost of all material labour and T&P etc. |
| 39 | MS or iron work of small sizes and section such as holding down bolts, hold fast, tie rods graring etc. wrought to required from including supply of steel bolts, nuts wastage etc and their fixing required for proper completion of the work. |
| 40 | Boring Holes in mild steel or iron not exceeding 10 mm diameter and thickness of plate not exceeding 6 mm |
| 41 | Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dial 10 metre openable length, upto 3 m height of wall with existing angle iron \\"Y\\" shaped placed 2.4 m or 3.0 m apart and with 9 horizontal R.B.T. reinforced barbed wire. stud tied with GI staples and GI clips to retain horizontal including necessary bolt or GI barbed wire to angle iron all complete as per direction of Engineer-in -charg. with reinforced barbed tape (RBT)/ spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape 90.52 mmthick) and weight 43.478 gm/metre excluding cost of MS angle, C.C. block etc. |
| 42 | Earth work in foundation in dry ordinary soil (loam clay or sand) including lift upto 1.5 meter and lead up to 30 mtr and including back filling, watering and ramming of excavated earth into the trenches or into the space between the structure and the side of foundation trenches or into the plinth with removal and disposal ar surplus earth as directed by the Engineer-in-charge upto a distance of 30M from the foundation. |
| 43 | Earthwork in filling in ordinary soil i/c lead upto 200 m and lift upto 1.50 m with ramming and dressing etc. directed by engineer in charge . |
| 44 | Providing and fixing of 90cm x 120 cm rectangular retro-reflectorised cautionary, mandatory and informatory sign as per IRC : 67 made of high inernsity grade sheeting vide clause 801.3 , fixed cover aluminium sheeting, 2 mm thick supported on a mild steel angle iron post 75mm x 75mm x6 mm firmly fixed to the ground by mean of properly designed foundationwith M-15 grade cement concrete 45 cm x 45 cm x 60cm below ground level as per approved drawing as per specification and direction of engineer encharge incliding cost of all materal labour & T&P etc. required for proper completion of work. |
| 45 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed steel conduit, with piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable etc. as required. |
| 46 | Providing and fixing following rating and breaking capacity and pole 200 A, 25 KA,TPMCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, Ics=100% Icu and Operational Voltage 690V etc. as required. |
| 47 | Supplying and fixing 15/16 A modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. |
| 48 | Supplying and fixing TV antenna socket outlet on the existing modular plate & switch box including connections but excluding modular plate etc. as required. |
| 49 | Supplying and fixing Bell push on the existing modular plate & switch box including connections but excluding modular plate etc. as required. |
| 50 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. |
| 51 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. |
| 52 | Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 Meter long etc. with charcoal/ coke and salt as required. |
| 53 | Laying of 4 x 16 Sqmm PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. |
| 54 | Supplying and fixing following rating, four pole, 40A- 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 55 | Supplying and fixing following rating, four pole, 100 A 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 56 | Supplying, Installation, Testing & Commissioning of 16-22 W LED surface mounted Batten light complete shape size and CCT shall be as approved by Engineer-in-Charge. |
| 57 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with white solid plastic seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. |
| 58 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. |
| 59 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively. |
| 60 | Providing and fixing White Vitreous China Flat back wash basin size 550x 400 mm with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require. |
| 61 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink with drain board size 510x1014 mm bowl depth 250 mm as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required. |
| 62 | Providing and fixing Flexible P.V.C. waste pipe size 32/40 mm for sink or wash basin including P.V.C. waste fittings complete. |
| 63 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 64 | Providing and fixing C.P. brass toilet paper holder. |
| 65 | Providing and fixing PTMT towel rail 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. |
| 66 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour. |
| 67 | Providing and fixing 15 mm nominal bore, 80 mm long, 42 mm high and 30 mm wide with BSP female threads PTMT urinal cock of approved quality and colour. |
| 68 | Providing and fixing 15 mm nominal dia Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. |
| 69 | Providing and fixing 20 mm nominal dia Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. |
| 70 | Providing and fixing 15 mm nominal bore C.P. brass long body bib cock of approved quality conforming to IS standards. |
| 71 | Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS standards. |
| 72 | Providing and fixing 150 mm dia C.P. brass shower rose with 15 or 20 mm inlet. |
| 73 | Constructing masonry Chamber 30x30x50 cm inside, in brick work With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in reinforced cement concrete slab 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size), including necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design. |
| 74 | Providing and placing on terrace (at all floor levels) polyethylene water storage ank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 75 | Providing, laying and jointing glazed stoneware 100 mm pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete. |
| 76 | Providing, laying and jointing glazed stoneware 150 mm pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysJul 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 days