Tender For Dnit For Repair Of Goraya Jandiala (Jodr-04) Road Damaged Due To Flood In District Jalandhar
Tender Value
26.98 Lakhs
Estimated cost
Bid Submission
09 Jul 2026
8 days left
EMD
53976
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jalandhar → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Dnit For Repair Of Goraya Jandiala (Jodr-04) Road Damaged Due To Flood In District Jalandhar
BOQ
| Sl. No. | Item Description |
| 1 | Brick on end edgingProviding and laying of Brick on end edging 6.83cm wide, 11.11cm long and 22.86cm high half brick deep including excavation, refilling and disposal of surplus earth upto 50 mtr complete as per Punjab PWD specifications |
| 2 | Water Bound Macadam Grading IIProviding, laying, spreading and compacting stone aggregates of Grading II to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheeled roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density complete as per technical clause 404 of MORT&H specifications |
| 3 | Surface DressingProviding and laying surface dressing in single coat using crushed stone aggregates of specified size on a layer of bituminous binder VG-10 @1kg per sqm laid on prepared surface after cleaning the road surface and rolling with 8-10 tonne smooth wheeled steel roller complete as per technical clause 509 of MORT&H specifications |
| 4 | Tack Coat @ 0.40kg per sqmProvidingandapplying tackcoatwithpenetration grade bitumen VG-10 using bitumen pressure distributor at the rateof 0.40kgper sqmon the prepared bituminous surface/granular surface treated with prime coat after cleaning the surface complete as per technical specifications |
| 5 | Bituminous Macadam 50mm to 75mm thickness (Grading II)Providing and laying bituminous macadam 50mm to 75mm thick with Continuous type hot mix plant using crushed aggregates of specified grading premixed with bituminous binder VG-30 @3.4%, laid over a previously prepared surface with hydrostatic paver finisher with sensor control to the required grade, level and alignment and rolled to achieve the desired compaction complete as per technical clause 504 of MORT&H specifications |
| 6 | Providing, laying and compaction of open - graded premix surfacing of 20 mm thickness consisting of crushed stone aggregates of specified grading premixed in a Continuous type hot mix plant with bituminous binder VG-10 @ 1.46kg per sqm, laid with Paver Finisher Mechanical and rolling with a smooth wheeled roller 8-10 tonne capacity, finished to required level and grades complete as per technical clause 510 of MORT&H specifications |
| 7 | Providing and laying of premix sand seal coat premixed in Continuous type hot mix plant using specified fine aggregates and penetration grade bitumen VG-10 @ 0.68kg per sqm, laid to the specified levels, grade and cross fall complete as per technical clause 511 of MORT&H specifications |
| 8 | Road marking with hot applied thermoplastic compound 2.5mm thick including reflectorising glass beads @ 0.25kg per sqm area as per IRC:35 1997 complete as per technical clause 803 of MORT&H specifications (CSR 24.57) |
| 9 | Cultural Cess 1% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysJul 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 days