Tender For Repair To Joinery,Periodical Services,Plastering And Other Misc B/R Items To Certain Bldg In Other Than Mh Area Under Ge (U) E/M At Meerut Cantt.
Tender Value
30 Lakhs
Estimated cost
Bid Submission
21 Jul 2026
12 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Meerut → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Joinery,Periodical Services,Plastering And Other Misc B/R Items To Certain Bldg In Other Than Mh Area Under Ge (U) E/M At Meerut Cantt.
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkats with shutter (Without taking off shutters from the frame) not exc 1.5 Sqm each complete all as specified and as directed. |
| 2 | Taking down Chowkats or frames exc. 1.5 Sqm and n,exc 4.00 sqm each, with shutters (without taking off shutters from the frame) complete all as specified and as directed. |
| 3 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid forseparately) Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified and as directed. |
| 4 | S & F Factory made double extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65x125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (Rates inclusive ofM.S. hold fast/ lugs or SS dash fasteners shall not be paid for separately). ® Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified & directed. |
| 5 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 35mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws including all fitting all as specified and as directed. |
| 6 | S&F Factory made single extruded WPC (Wood Polymer Composite) Skelton WPC door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges, wire mesh and necessary S S screws shall be paid separately etc complete all as specified and as directed. |
| 7 | S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube and fixed in opening as per specification and drawing on page No. 150 MES SSR-2004 Part II and complete all as specified and as directed. |
| 8 | S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tube for top & bottom rails. M.S. frame shall be covered with heat mouleded plain colour PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail & bottom rail. Paneling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, fixed in the frame at site as per specification clause No.8B.1 to 8B.10 and drawing on page No. 146 of MES SSR-2004 Part-II complete including fixing only iron mongery etc all as specified. |
| 9 | S&F stainless steel 100mm long Hasp and staple , safety type, and fixed with screws |
| 10 | S&F 100mm long Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed,type B-21 and directed by Engr-in-charge. |
| 11 | S&F 200mm stainless steel handle polished complete all as specified and directed |
| 12 | S&F 200mm stainless steel tower bolt polished complete all as specified and directed |
| 13 | S&F stainless steel sliding door bolt plate type 300 mm long with bright bolt not less 12 mm dia bolt with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate, complete all as specified and as directed. |
| 14 | S&F of stainless steel wire cloth cut to size, 0.36 mm nominal dia wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staple complete all as specified and as directed. |
| 15 | S&F in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainless steel staple complete all as specified and as directed. |
| 16 | Dismantling wall and ceiling boards ( fibre pulp insullation Etc) or insullation boards/ slabs blankets any thickness including cover fillets including taking out old unsv boards complete all as specified and as directed. |
| 17 | S&F in repair of Anodised aluminium snap grid frame work for false ceiling complete all as specified and as directed. |
| 18 | M&L for 4mm thick board/ tiles for E board false ceiling 60X60 cm in size fixed with on frame work or with staple on snap grid as in ceiling flat or sloping complete all as specified and as directed. |
| 19 | Supply and fabrication of wardrobe/ cup board made out of 18-19 mm thick PVC board of density 600 kg/cum with drcorative colour laminated sheet on both sides incl PVC lipping/tape on exposed surface , colour as approved by Engr-in-charge/ GE incl dismantling old unserviceable board complete all as specified and directed. |
| 20 | S&F Continuous( piano) hinges(width of flaps 40mm when open , mild steel , bright finish or electrogalvanised |
| 21 | S&F Magnet ball catcher brass body with 8mm dia steel ball of approved qualities complete all as specified |
| 22 | S&F in repair 65 mm size brass Cup board lock, 4 lever grade I of superior quality all as specified and directed. |
| 23 | S&F in repair Drapery rod 18-20mm dia stainless steel pipe with steel finish incl steel brackets etc incl connected items for wardrope/CB etc complete all as specified and directed. |
| 24 | Supply and fabrication in repair of CB, kitchen cabinet, shelf, shutter, partition etc made up of 16-18mm HDHMR board (Century/ Action Tesa/Kitply) with both side company pasted lamination one side decorative and other side white lamination duly lipping (edge bending) on exposed surfaces complete with G profile handle of approved colour (01 No for each shutter) and soft closing hinges (02 Nos in each shutter) (Hettich/ Godrej/ IPSA) incl dismantling existing unserviceable boarding complete all as specified and as directed. |
| 25 | S&F in repair “ Stainless steel Cutlary basket of size 370mm x 485mm x 100mm made of min 4mm dia stainless steel wire and bottom of S S perforated sheet approved quality with suitable arrangement for fixing telescopic basket over and including telescopic channel 18 inches/20inches in length two way extruded MS galvanised over rollers as approved by Engr-in-Charge. ( Make: Godrej or equivalent approved by Engr-in-Charge” |
| 26 | S&F in Repair Stainless steel thali basket of size 370mm x 485mm x 200mm made of min 4mm dia stainless steel wire of approved quality with suitable arrangement for fixing telescopic basket over and including telescopic channel 18 inches/20inches in length two way extruded MS galvanised over rollers as approved by Engr-in-Charge. All as specified and as directed Make: Godrej or equivalent approved by Engr-in-Charge. ” |
| 27 | S&F in Repair Stainless steel basket (plain) of size 370mm x 485mm x 150mm made of min 4mm dia stainless steel wire approved quality with suitable arrangement for fixing telescopic basket over and including telescopic channel 18 inches/20inches in length two way extruded MS galvanised over rollers as approved by Engr-in-Charge.All as specified and as directed Make: Godrej or equivalent approved by Engr-in-Charge” |
| 28 | Drilling holes for pipes etc n. exc 25 mm dia (for gas pipe etc)complete all as specified and directed. |
| 29 | S&F in repair Sink mixer with regular swinging spout (wall mounted model ) with connecting legs & wall flanges) for 15 mm bore, fixed in repairs, complete all as specified and as directed. |
| 30 | S&F in repair 1mm thick stainless steel kitchen sink with drainage board with plugs, washers and waste coupling and PVC waste pipe including fixing on half brick wall or cantilever brackets(angle iron ) and connecting union overall size 915mm x 460mm, bowl size 410mm x 330mm x 160mm, fixed in repair, complete all as specified and directed |
| 31 | S&F in Repair stainless steel plate rack made of 0.50mm thick of over all size 900mm x 750mm x 255 mm and weight not less than 7.00 Kg each of approved quality complete all as specified and directed.. |
| 32 | M & L for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc.,Fe 410 w (gde-E-250) quality-A complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed. |
| 33 | S&F 50 micron powder coated aluminium glazed window shutters,with frame Three track (each shutter approx. half the size of opening with two Nos. glazed shutter and 1 No. wire gauged shutter including necessary jointing cleats for fixing etc, glazing clips, rubber packing, aluminium snap beading, screws, aluminium fittings such as handle clips (suitable size), locking device, and glazing in panels with 5.0mm thick coloured/tinted glass and gauged with 0.36mm dia, 1.40mm aperture SS wire meshsing Aluminium Section Id 491, 4309, 4310, 8853, 8851, 9205 complete all as specified and as directed by Engineer-in-Charge. (In case of non-availability of any particular section, the higher section in terms of Kg/rm shall be provided without any extra cost to govt complete all as specified and as directed. |
| 34 | S&F 50 micron powder coated aluminium anodised sections doors comprising glazed shutters with frame using aluminium anodised extruded sectiions of size 63.50mmx38.10mm for frames, 85mmx44.45mm for stiles, 83.50x44.45mm for top and middle rails , 100mm44.45mm for bottom rail of shutters having 1.25mm thickness, glazing with 5mm thick tinted sheet glass fixed with and including aluminium anodised snap beadings, neoprene gaskets, shutters fixed to frame with with 125 mm size stainless steell butt hinges -03 Nos per leaf,powder coated aluminium fancy extruded section 200mm long handle-01 No per leaf, aluminium anodised Tower bolts 200mm long -02 Nos per leaf,powder coated aluminium body hydraulic door closer 01 No per leaf of suitable capapcity, floor door stopper of powder coated aluminium body 150mm long 01 No per leaf, brass Mortice lock 6 lever of required size -01 No per door complete all as specified and directed. |
| 35 | S&F in Repair for Providing and fixing anodised aluminium partition work for doors, windows, ventilators and partitions (Fixedportions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom (half portion) and sides with required 12 mm thick EPDM board with rubber/ neoprene gasket and top of half portion with 5.0 mm thick glass with Aluminium snap beading for glazing/ paneling etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, , C.P. brass/ stainless steel screws including taking out old partion complete all as specified and directed. |
| 36 | M&L for repair of old aluminium windows/door/partiton etc incl replacement of rubber packing, reapir/replacement of aluminium beading, repairing/tightning of any loose section, cleaning of track/glass panes etc by taking down and refixing in position or without taking down existing shutters complete all as specified and directed. |
| 37 | S&F aluminium door seal brown/white coated with PVC brush or PVC flexible door rubber fitted in bottom of door complete all as specified and directed. |
| 38 | Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 39 | M&L for 10 mm thick cement plaster in cement mortar 1:6 on brick or concrete surface etc. on wall finished even and fair extra cement, complete all as specified and directed. |
| 40 | M&L for 15 mm thick cement plaster in cement mortar 1:4 on brick or concrete surface etc. on wall finished even and fair extra cement, complete all as specified and directed. |
| 41 | M&L for 05 mm thick cement plaster in cement mortar 1:3 on brick or concrete surface etc. on ceiling finished even and fair without using extra cement, complete all as specified and directed. |
| 42 | M&L for carrying out treatment in following step on new or old surface as given below:-Step (i) M&L for complete removal of existing treatment by scrapping with wall sandar as approved having RPM not less than 1500 sanding pad of 80 Grit having dia 17 cm to 25 cm to make the surface free from dust, loose paint etc. from existing plastered surfaces of wall. Step (ii) M&l for applying waterproof cement based putty @ 1 kg per Sqm of average thickness 1 mm of approved make over prepared surface and sanding of the putty surface with sandar machin of approved make having RPM 1500, dia 17 cm to 25 cm make the surface free from dust. Mix the putty powder by adding 40-50% water and mix it with as per list of makes Trucare Putty mixer Step (iii) M&L for one coat of acrylic water passed exterior grade primer @ 0.9 liter per 10 sqm diluted with water in 1.1 ratio to be applied with fully automatic airless spray machine.Step (iv) M&L for water based premium acrylic smooth exterior emulsion paint of approved make with low VOC less than 50, Anti Algal properties in two coats applied over priming coat with fully automatic airless spray machine of paint application. |
| 43 | M&L for carrying out treatment in following step on old surface as given below:-Step (i) M&L for complete removal of existing treatment by scrapping with wall sandar as approved having RPM not less than 1500 sanding pad of 80 Grit having dia 17 cm to 25 cm to make the surface free from dust, loose paint etc. from existing plastered surfaces of wall. Step (ii) M&L for water based premium acrylic smooth exterior emulsion paint of approved make with low VOC less than 50, Anti Algal properties in two coats applied with fully automatic airless spray machine of paint application. |
| 44 | Removing existing paint by mannual scrapping and sanding with TruCare Wall Sander: L-01/H-01(having mechanical vaccum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7\\"/9\\" to make the surface free from dust, loose paint etc by skilled labour on wall surface complete all as specified and directed. |
| 45 | Providing and applying waterproof cement based putty @ 1kg (undiluted) per sq mtr of average thickness 1mm, of paints or its equivalent over the plastered/old painted wall after scrapping to prepare thenew or old surface even and smooth on wall surface complete all as specified and directed.Step 1 : Mix the putty powder by adding 40-50% water and mix it with Paints or equivalent as per list of makes Trucare Putty mixer Step 2 : Allow 6-8 hrs time to dry the putty surface. |
| 46 | Sanding of the putty surface Tru Care Wall Sander: L-01/H-01(having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7\\"/9\\" to make the surface free from dust, loose paint etc by skilled labour on wall/ceiling surface complete all as specified and directed. |
| 47 | M&L for applying one coat of acrylic waterbased interior grade primer @ 0.8ltr (undiluted)/10Sqm diluted with water in 1:1 ratio to be applied. by skilled labour on old or new wall surface complete all as specified. Allow 6-8hrs to dry the surface for painting of subsequent quotes etc complete all as specified and directed. |
| 48 | M&L for applying two coats of oil bound distemper applied over priming coat on wall surface complete all as specified. Note- Allow 6-8hrs to dry the surface for painting of subsequent quotes complete all as specified and directed. |
| 49 | Preparation of old/new decorated internal wall/ceiling surface by sand paper of required sizes, filling in wall care putty in potholes existing or created again sand papering thus prepairing surface smooth to recieve further finishes complete all as specified and all as directed. |
| 50 | M&L for applying two coats of plastic emulsion on wall surface complete all as specified and directed. |
| 51 | M&L for Applying one coats of Oil bound distemper on ceiling surface complete all as specified and directed. |
| 52 | M&L for Applying one coats of Oil bound distemper on wall surface complete all as specified and directed. |
| 53 | M&L for Preparation of old painted wood or wood based surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed. |
| 54 | M&L for Preparation of old painted steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed. |
| 55 | M&L for preparation of old/new decorated internal wall/ceiling surface by sand paper of reqd sizes, filling in wall care putty in potholes existing or created again sand papering thus prepairing surface and applying one coat of White wash/colour wash complete all as specified and directed. |
| 56 | M&L for preparation of old/new decorated external wall surface by sand paper of reqd sizes, filling in wall care putty in potholes existing or created again sand papering thus prepairing surface and applying one coat of cement base paint complete all as specified and all as directed. |
| 57 | Hacking out old broken glass (any thickness size, quality or description) from wooden/ steel frames glazed with putty or fixed with wooden beads/metal pins complete. |
| 58 | S&F sheet glass ordinary quality and glazing with oil putty in square n. exc 0.50 Sqm in each pane 3 mm thick complete all as specified and directed. |
| 59 | Taking Down Cement plaster/duster bed PCC of column, chajja , paraphet of roof, facia, drops, ceiling etc and making good with cement plaster 10mm thick in CM 1:3 with PCC 1:2:4 (average thickness of PCC 25 mm) as required brushing neat cement slurry wwith 3.0 kg of cement per sq metre including necessary form work and scaffolding upto 4 storey floor including fixing of wire netting where required to match the existing surface complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysJul 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender