Tender For Provn Of Chain Link Fencing With A Gate At Ib Hill At Chakabama Military Station Under Age (I) Zakhama
Tender Value
8.73 Lakhs
Estimated cost
Bid Submission
14 Jul 2026
6 days left
EMD
17500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kohima → Nagaland
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Chain Link Fencing With A Gate At Ib Hill At Chakabama Military Station Under Age (I) Zakhama
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in post holes in hard/dense soil each not exceeding 0.5 CUM, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm thick, watering and removing surplus soil to a distance not exceeding 50 metre and making good surface complete all as specified and as directed. |
| 2 | M&L for PCC 1:3:6, type C2 (using 40mm graded crushed stone aggregate) as in foundation, filling and mass concrete etc. complete all as specified and as directed. |
| 3 | S&F mild steel angle iron post & strut etc. in fencing including embedding in concrete and screwing etc. including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 GdeE-165 completed all as specified and as directed. |
| 4 | S&F Mild steel round or square bars 10mm dia and over for straining in available length, cut to length, bent to shape required Fe-410W (Gde E-250) quality 'A' complete all as specified and as directed. |
| 5 | S & F galvanized two strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia bars at 75 mm spacing and straining and fixing to RCC / steel post etc., including securing or tying at crossing with and providing of galvanized mild steel wire, staples or steel pins, etc., (each line of wire to be measured separately) complete all as specified and as directed. |
| 6 | Fixing only chain link fencing wire mesh of size100x100mm, made with 4 mm dia mild steel galvanised wire etc including provision of binding wire complete all as specified and as directed. |
| 7 | Supply only chain link fencing wire mesh of size 100x100mm, made with 4 mm dia mild steel galvanised wire complete all as specified and as directed.Note:- Unit weight of chain link fencing shall be ascertained through BOO as ordered by AGE (I). The same shall be submit before payment of RAR. |
| 8 | S & F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long and diameter of shank 5 to 10mm completed all as specified and as directed. |
| 9 | M&L for preparation of new steel or iron surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paints over a coat of red oxide, zinc chrome primer complete all as specified and as directed. |
| 10 | M&L for preparation of new steel or iron surfaces of any description n exc 10cm width or girth and applying two coats of synthetic enamel paints over a coat of red oxide, zinc chrome primer complete all as specified and as directed. |
| 11 | Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for laying cables, foundation for pole, etc and getting out in hard/dense soil complete all as specified and as directed. |
| 12 | Returning, filling in, including spreading, levelling, watering and well ramming of soil in layers n. exc 25cm thick complete all as specified and as directed. |
| 13 | Removing excavated soil to distance n. exc 50m and depositing where directed at a level n. exc 1.5m above the starting point complete all as specified and as directed. |
| 14 | M&L for PCC 1:4:8, type D2 (using 40mm graded crushed stone aggregate) as in foundation, filling and mass concrete etc. complete all as specified and as directed. |
| 15 | M&L for RCC 1:1.5:3, type B1 (using 20mm graded crushed stone aggregate) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete. complete all as specified and as directed.Note for item No.15 to 16: Reinforement shall be measured and paid separately under relevant item of this schedule. |
| 16 | M&L for RCC 1:1.5:3, type B1 (using 20mm graded crushed stone aggregate) as in Columns, pillars, piers, posts and struts, complete all as specified and as directed. |
| 17 | S&F rolled mild steel, Fe 410-W (Gde E-250) quality - A,for framed work as in doors or gates of angle or other sectionwith gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to beprepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing, complete all as specified and directed. |
| 18 | S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165, complete all as specified and directed. |
| 19 | M&L for mild steel TMT bars 10 mm dia and over cut to length, bent to shape as required including cutting, bending cranking, hooking end and binding with mild steel wire(annealed) not less than 0.9mm dia as in reinforcement bar complete all as specified and as directed. |
| 20 | All as per item No 19 above but 8mm dia bars using for stirrups complete all as specified and as directed. |
| 21 | Formwork to rough finished surface sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and as directed. |
| 22 | Formwork to rough finished concrete surface sides of pillars, posts, struts, piers, columns and stanchionscomplete all as specified and as directed. |
| 23 | M&L 20mm granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. including grinding and polishing and including screed bed of 10 mm thick in cement mortar (1:4) complete all as specified and as directed. |
| 24 | S & F GI tubing 25mm bore, medium grade with all fittings and fixed complete to walls or laid in floors icomplete all as specified and as directed. |
| 25 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified and as directed. |
| 26 | M&L for pre polished chequered cement concrete tiles in floor, of size 30cmx30cmx 25 mm thick with white cement and pigments of approved make jointed with cement slurry and pointed with white cement mixed with colour pigment to match with the tiles over and including 50 mm thick PCC sub base in (1:3:6) type C2 (using 40mm graded stone aggregate) and screed bed of 15 mm thick in cement mortar (1:6) complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysJul 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender