Tender For Provn Of Toilets For Office Staff At Fp Cell And Mt Office And Provisioning Of Parking Shed At Altinho Military Complex Of Hq 2 Stc At Panaji Under Ge Panaji
Tender Value
10.91 Lakhs
Estimated cost
Bid Submission
14 Jul 2026
4 days left
EMD
22000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
goa → Goa
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Toilets For Office Staff At Fp Cell And Mt Office And Provisioning Of Parking Shed At Altinho Military Complex Of Hq 2 Stc At Panaji Under Ge Panaji
BOQ
| Sl. No. | Item Description |
| 1 | Excavation of trenches in soft/disintegrated rock, not exceeding 1.5m wide and not exceeding 1.5m in depth, for foundation, etc and getting out in complete all as specified and directed. |
| 2 | Material and labour for Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/ disintegrated rock/road complete all as specified and directed. |
| 3 | Material & Labour plain cement concrete 1:4:8 type D2 (using 40 mm graded stone aggregate) as in foundations complete all as specified and as directed. |
| 4 | M&L for hardcore of gauge n. exe 63 mm deposited, spread, levelled in layers n. exe 15 cm thick, watered rammed to a true surface using broken bricks. |
| 5 | Material and labour for moorum/red bajri filling in floors or pavings, laid in layers not exceeding 15cm thick, spread, levelled and rammed including watering complete all as specified and directed |
| 6 | M&L for Pre-cast cement concrete block(Type B1 1:2:4 20 mm graded aggregate ) masonry with solid blocks, exc. 10 cm in width and setting in mortar, complete all as specified and directed. |
| 7 | Returning filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick in soft/ disintegrated rock complete all as specified and as directed. |
| 8 | Removing excavated soft/disintegrated rock to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed. |
| 9 | M & L rendering 15 mm thick on stone masonry surfaces or surface other than fair face of brickwork or on one side of lathing in CM 1:6 without using extra cement. |
| 10 | Material and labour for 40mm thick damp proof course in plain cement concrete 1:2:4, type B-0 (using 12.5mm graded crushed stone aggregate) to horizontal or vertical surfaces including necessary formwork and concrete mixed with water proofing compound complete all as specified and directed. Note :- Water proofing compound will be measured and paid separately. |
| 11 | Material & Labour for rendering 15mm thick on concrete surface or other than fair face of brick surface in cement mortor 1:4 to be finished even and fair without using extra cement complete all as specified and directed. Note :- Water proofing compound will be measured seperatly. |
| 12 | Supply only integral water proofing compound complete all as specified and as directed. |
| 13 | Material & Labour for preparation of new plastered surfaces of walls and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50gm/ltr and UV resistance as per IS 15489-2004, Alkali and fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 Sqm over two coats of damp proof white complete all as specified and directed. |
| 14 | M&L for Preparation of new surface of wall and applying two coat of oil emulsion distemper over coat of alkali resistant primer on internal walls surfaces complete all as specified and directed. |
| 15 | Material and labour for applying 3mm thick wall care putty on internal walls surfaces complete all as specified and directed. |
| 16 | Material and labour for applying two coat of oil bound distemper(white/tinted) over a coat of primer on internal walls surfaces complete all as specified and directed. |
| 17 | S&F for Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe 410 -W (GdeE- 250)quality A complete all as specified and directed. |
| 18 | Material and labour for applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surfaces of any description, over 10cm in width or girth complete all as specified and directed. |
| 19 | Supply & Fix Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having Tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 20 | Ditto all as item 19 above but plain steel sheet 0.50 mm thick |
| 21 | Supply and fix anodized aluminium snap grid frame work for false ceiling of grid size 605mm x 605mm with size of main tee 35mm x 25mm x 1.5mm and cross tee 25mm x 25mm x 1.5mm and supporting angle at the end all alonge the wall 40mm x 25mm x 2mm, hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long with and including 6mm thick designer non-asbestos fibre cement building boards fixed or laid/ inserted to aluminium frame work with screws complete all as specified directed. |
| 22 | M&L cement concrete type B1 1:2:4 using 20mm graded stone aggregate 25mm thick as in flooring etc. |
| 23 | Material and labour for 75 mm thick plain cement concrete type D2, 1:4:8 (40mm graded aggregate) as in sub base of floor complete all as specified and directed |
| 24 | M & L coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 20mm th screed bed in CM 1:6. |
| 25 | Material and labour for coloured glazed ceramic tiles 450x300x7mm thick as on vertical surfaces of wall such as skirting, dados and riser to step set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick plaster in cement mortar 1:4 complete all as specified and directed |
| 26 | S&F factory made single extruded WPC (Wood Polymer Composite) solid door/window/ceosetory windows and other frames/chowkats of size 45x70 mm complrising of virgin PVC polymer of K value 58-60(Suspension grade) calcium carbonate and natural fibres (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 of 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS Screws having minimum frame density of 750 kg/cum,screw withdrawal strength of 2200 N (Face) & 1100 N (Edge) minimum compressive strength of 58 N/mm2, moudules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engr-in-Charge. Note : For WPC solid door/window frames minus 5 mm tolerance in demension ie depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 27 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. |
| 28 | Supply & Fix 4mm thick figured glass/pin headed type and glazing with oil putty or fixed on aluminum with beads in square not exceeding 0.5sqm in each pane complete all as specified and as directed |
| 29 | Supply and Fix Butt hinges, medium weight cold rolled stainless steel and fixed 100mm long complete all as specified and directed. |
| 30 | Supply & Fix aluminium anodised, barrel tower bolts of extruded section and fixed 200mm long complete all as specified and as directed. |
| 31 | Supply & Fix aluminium handles cast type anodised 150mm long complete all as specified and as directed. |
| 32 | Supply and fix 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed |
| 33 | S&F rotational moulded polyethylene water storage tank (Cylindrical vertical with closed top ) hoisted & fixed in position all as specified in SSR PT I capacity of tank 500 ltr including Gun-metal, globe or gate valves 25mm bore, with iron wheel head, screwed both ends & ball brass valves 20mm dia, high pressure, with polythene float and fly nut complete. |
| 34 | S&F rotational moulded polyethylene water storage tank (Cylindrical vertical with closed top ) hoisted & fixed in position all as specified in SSR PT I capacity of tank 1000 ltr including Gun-metal, globe or gate valves 25mm bore, with iron wheel head, screwed both ends & ball brass valves 20mm dia, high pressure, with polythene float and fly nut complete. |
| 35 | Supplying & laying CPVC water tubing outer dia 20mm(concealed), SDR-11 grade and plain CPVC SDR -11 fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed. |
| 36 | All as in item No. 35 above, but 25mm bore pipe. |
| 37 | Supply and fixing CPVC 20mm Brass Elbow (3/4 x 1/2) complete all as specified and directed. |
| 38 | Supply and fixing CPVC 20mm Brass Tee complete all as specified and directed. |
| 39 | Supply and fixing CPVC 20mm Male Brass Threaded Adaptor (MTA/ MBTA) complete all as specified and directed |
| 40 | Supply and fixing CPVC 20mm Female Brass Threaded Adaptor (FTA/ FBTA) complete all as specified and directed |
| 41 | Supply and Fix chromium plated bib taps cast copper alloy, fancy type with crutch or butterfly handle, screwed for iron pipe or for brass ferule and fixed of size 15mm bore complete all as specified and directed. |
| 42 | Supply and Fix chromium plated two way bib taps cast copper alloy, fancy type with crutch or butterfly handle, screwed for iron pipe or for brass ferule and fixed of size 15mm bore complete all as specified and directed. |
| 43 | Supply and fix Vitreous China wash basin with full pedestal size 570x470x190 mm complete(wash basin along with pedestral,waste coupling, waste pipe all other accessories) with all as specified and directed. |
| 44 | Supply and fixed 15mm dia brass chromium plated swan neck pillar tap with single lever complete all as specified and direction |
| 45 | Supply and fixed Chromium plated Angle stop cock 15mm bore with wall flange cast copper alloy complete all as specified and directed. |
| 46 | Supply and fix vitreous china wash down water closet pan (pedestal pattern) white with PVC (SWR) \\"P\\" or 'S' trap, , connection to flushing pipe and outgoing sewage pipe,Plastic water closet seat ,black,closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, along with PVC valve less, symphonic action type flush tank, white, 10 litre capacity with inlet ball valve, float & handle incl brackets complete high level, flush pipes of PVC 32 mm dia, rubber cones, PVC connection 15 mm size with PTMT nut of length 600 mm and chromium plated angle cock of 15mm dia complete all as specified and as directed. |
| 47 | Supply and fix PVC connection 15 mm size with PTMT nut of length 600 mm, complete all as specified and directed. |
| 48 | Supply & Fix tubular towel rail 60 cm long brass chromium plated 20mm dia D-type with brackets fixed to walls complete all as specified and directed. |
| 49 | Supply and Fix health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25mtr long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified complete all as specified and directed. |
| 50 | Supply & Fix 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or fixed to walls complete all as specified and directed. |
| 51 | Supply & Fix 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or fixed to walls complete all as specified and directed. |
| 52 | Supply & Fix 50 mm dia unplasticised PVC pipes of pressure rating 10kgf/cm2 laid in trenches or fixed to walls complete all as specified and directed. |
| 53 | Supply and fix 110mm PVC (SWR) Bend of any radius provided with access door complete all as specified and directed. |
| 54 | Supply and fix 75 mm PVC(SWR) Bend complete all as specified and directed. |
| 55 | Supply and fix 110mm PVC (SWR) Bend complete all as specified and directed. |
| 56 | Supply and Fix 110mm PVC (SWR) reducers complete all as specified and directed. |
| 57 | Supply and Fix PVC floor trap (SWR) plain with grating incl jointing with solvent cement 75mm dia outlet complete all as specified and directed. |
| 58 | Supply and Fix PVC multi floor trap (SWR) plain with grating incl jointing with solvent cement 75mm dia outlet complete all as specified and directed. |
| 59 | Supply and fix powder coated aluminium frame (minimum thickness of powder coating 50 micron) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed. |
| 60 | M & L for concrete bed in PCC 1:3:6 type C2 ( using 40 mm graded stone aggregate) to drain pipes 150mm including packing under ,and hauching against the sides of pipes after they are tested all as specified and directed. |
| 61 | Material and labour reinforced cement concrete (nominal mix) Type B1 1:2:4 (20mm graded stone aggregate) in Chajja supported on walls, beams and columns in floors, roofs landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 62 | Material and labour reinforced cement concrete (nominal mix) Type B0 1:2:4 (12.5mm graded stone aggregate) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 63 | Material and labour reinforced cement concrete (nominal mix) Type B1 1:2:4 (20mm graded stone aggregate) as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed. |
| 64 | Material and labour for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs,slabs etc also splays between floors and beams, etc for rough finished flat surfaces of concrete complete all as specified and directed. |
| 65 | Material and labour for plain cement concrete type B-0, 1:2:4 (12.5mm graded stone aggregate) in coping and the like including weathering, slightly rounded or chamfered angles and throating, as directed, with and including use of form work complete all as specified and directed. |
| 66 | Material and labour for mild steel TMT bars 10mm dia and over, cut to length, bend to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 67 | Material and labour for mild steel TMT bars 6mm to 8mm dia, cut to length, bend to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 68 | Material and labour for Cutting into old masonry wall built in cement mortar to form toothings for and bonding in new brick or stone work including making good in mud mortar |
| 69 | S&F for compound girders and stanctions, lattice girders, aerial masts, staging for water tanks and like including caps, bases,splices etc.built upfrom two or more beam or channel sections angles with plates, including all lattice bars,stiffeners,gusset plates,etc Fe 410 -W (GdeE- 250) quality A |
| 70 | M & L PCC 1:3:6 type C-1(20mm graded aggregate), 75mm thick as in plinth protection, Surface finished fair and smooth without using extra cement. |
| 71 | S & F Vitreous china urinal,half stall type flat back of size 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe . |
| 72 | M&L for Providing and laying 80mm thick factory made chamfered edge cement concrete aver block of M-30 grade with approved colour, design & pattern as in footpath,parks, lawns, drive ways or light traffic parking etc., of required strength, thickness& size/ shape, made by table vibratory method using PU mould, laid in requiredcolour & pattern over and including 50mm thick compacted bed of coarse sand,compacting and proper embedding/ laying of inter locking paver blocks into the sandbedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. |
| 73 | Material and labour for 100 mm thick plain cement concrete type D2, 1:4:8 (40mm graded aggregate) as in sub base of floor complete all as specified and directed |
| 74 | M & L for point wiring with 1.5 sqmm (nominal cross sectional area) single core pvc insulated ,unsheathed FRLSH copper cable ,1100 Volt grade with multi stranded copper conductor drawn through and including non-metallic ,rigid non metallic PVC conduit (medium grade) concealed in walls /ceiling with and including 1.5 sqmm single core PVC insulated multistranded ,unsheathed FRLSH copper conductor cable as continous earth continuity conductor (green in colour) with cast Iron/ Pressed Steel modulur terminal boxes any size/module,concealed on walls and fixed by means of brass screw including modular white cover plates and cover frames any size /module and blanck plates, for mounting or housing switches ,socket outlets, fan regulators etc incl all other fixing accesories for one light/fan/exhaust fan/call bell point controlled by one 5/6 Amps switch complete including making good of wall surface by cementing/plastering complete all as specified and directed. |
| 75 | One light point controlled by one way switch. |
| 76 | One exaust fan point controlled by one way switch |
| 77 | One 3 pin switch socket point outlet 5A on independent board |
| 78 | All as per item No. 74 above but with cable size 2.5 sqmm for switch socket outlet point 15A on independent board including 2.5 sqmm PVC- FRLSH insulated copper earth continuity conductor to common earth. |
| 79 | S & F modular Switch 1 way 6 Amp, 1 module |
| 80 | S & F modular Socket 6A/16A -2/3 pin combined 2 module. |
| 81 | S&F ceiling rose, surface backlite, 65 x 20 mm three terminal |
| 82 | S & F modular Socket 6A-2/3 pin combined 2 module. |
| 83 | S & F modular Switch 1 way 16 Amp, 1 module. |
| 84 | Material and labour for concealed sub main wiring with FRLSH PVC insulated 1100 Volt Grade stranded copper conductor cable with of size 2X 2.5 Sqmm in PVC conduit of 20/25 mm and one run of 2.5 Sqmm copper earth wire including all necessary connections and fixing arrangements complete |
| 85 | S&F double door metallic sheet metal enclosure for DB when MCBs to be used SPN 4 ways, 240 V with 200Amps rated bus bar complete fixed properly on in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs of cables/wires all as directed. |
| 86 | Supply and fix MCB SP 240volts, 6Amp to 32Amp, 10KA capacity having C-series connected with suitable lugs including testing and commissioning complete all as specified and as directed. |
| 87 | All as per Item No. 83 above but SPN 32 Amps. |
| 88 | Supply and fixing LED lights fitting 1x 20W,lumen output >=120 lm/watt, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed |
| 89 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V A decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete. |
| 90 | Supply and Fixing LED building security light fitting 30watt 230 V AC outdoor type with hight pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP65/66 protection complete all as specified and directed. |
| 91 | Supply and fix exhaust fan, made of sturdy engineering plastic ,AC single Phase. 230V of size 250 mm sweep with, blades, and frame and louvers including making suitable hole on wall and making good all as specified and directed. |
| 92 | Material and labour for earthing complete with galvanised steel earth plate electrode 600mm x 600mm x 6mm thick buried directly in ground (earth pit not less than 2.25metre deep below natural ground level) with top edge of the plate not less than 1.5metre below normal ground level, connected to galvanised earth lead wire 4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel connected to main switch board/ main DB’s/ earth test point with and including necessary excavation and earth work in any type of strata, PCC 1:3:6, type C1 in chamber wall with 50mm thick, RCC cover 1:2:4, type B0 duly reinforced with 6 mm dia bar, @100mm both way with suitable lifting handle, charcoal dust and common salt mixed and packed in 150mm thick layer all around the earth plate, watering pipe of size 20mm dia medium grade, 0.63mm thick GI sheet funnel with wire mesh, GI protection pipe 15mm dia light grade up to 7.5m from electrode and engraving of earth marking on nearby structure/ building with cement motor 1:4 plate of size 200mm x 150mm x 15mm thick and writing of earth results with paint complete all as shown in electrical plate No. 3 of SSR Part-I complete all as specified and as directed. Note: - On testing if desired earth resistance is not obtained, the earthing will be redone at no extra cost. |
| 93 | Supply and Laying in trenches galvanised steel water tubing of medium grade with and inclding all fittings such as bends, elbows, tees, unions, nipples, short pieces etc as requierd at site, laid in trenches including dismantiling and taking out old unserviceable pipe line along with fittings from existing connections complete all as specified and directed Note:- (i) Excavation and earth work shall be measured and paid separately under relevant item of Sch 'A' (ii) The rates quoted inclusive of cutting, jointing and testing of the pipe (iii) All other fittings requierd shall be provided by the contractor at his own cost. (a) Bore of tube 25 mm Dia |
| 94 | Supply and fix Gun metal valve 25 mm (1”) dia pipe with iron wheel thread screwd with both ends for iron pipes complete including dismentalling of old unsv gate valve fixed at any location or has directed and specified |
| 95 | Supply and fixing of 0.5 HP Motor pump including all necessary connections & accessories and fixing arrangements complete all as speciifed and directed. |
| 96 | Cutting chases, pinning in, making good of Bituminous road/ PCC hard standing to facing where required and pointing in cement mortar 1:3, exc.10 cm. but not exc.20 cm girth to ends or edges of landing,steps,cills,sunshades,shelves,lintels,etc.and cutting chases for concealed water tubing or concealed conduit wiring,laying of cables and making good with old shape and size all as specified and directed. |
| 97 | M&L for making connection by cutting existing GI /CI/DI tubing for alterations or additions or fixing of tee as specified and directed by Engr-in-charge. (Each cut measured) |
| 98 | Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5 m in depth for foundation laying of pipe line etc and getting out in hard/dense soil complete all as specified |
| 99 | Returning filling including spreading, levelling watering and well ramming in layers not exceeding 25 cm thick in hard/dense soil complete all as specified and directed |
| 100 | Removing excavated surplus hard/dense soil to a distance not exceeding 50 m and depsoiting where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed |
| 101 | Excavating in post holes (or similar holes) each n exc 0.5 cum in soft/disintegrated rock, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm and removing surplus soil at a distance n exc 50m and making good surface all as specified and directed. |
| 102 | M&L for Cement concrete 1:3:6 type C2 (using 40 mm graded stone aggregate) in foundations, filling and mass-concrete all as directed by Engr-in-charge. |
| 103 | S&F for Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe 410 -W (GdeE- 250)qualityA all as specified and directed. |
| 104 | S&F for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161 1979 grade St.-240 all as specified and directed. |
| 105 | M & L for Preparation of New steel surface of any description over 10 cm width or grith and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified. |
| 106 | S&F pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws and necessary groove cutting in existing walls, including filling of gaps between wall and sheet with CM 1:4, complete all as specified and directed by Engr-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysJul 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender