Tender For Construction And Installation Of Water Supply And Filtration System For Gss And Colony Residents At 132Kv Gss, Aegcl, Teok
Tender Value
21.50 Lakhs
Estimated cost
Bid Submission
20 Jul 2026
6 days left
EMD
43020
Bank guarantee accepted
Document Fee
1500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jorhat → Assam
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction And Installation Of Water Supply And Filtration System For Gss And Colony Residents At 132Kv Gss, Aegcl, Teok
BOQ
| Sl. No. | Item Description |
| 1 | Deep Well Boring |
| 2 | Preparation of site for placement of the drilling rigincluding excavation of mud pit, circulation drain,collection chamber etc. all complete as directed. |
| 3 | Movement of Rig from the Divisional HeadQuarter to the drilling site including cost of P.O.L.all complete as directed |
| 4 | Transportation of all ancillary equipments, campmaterials, welding set, rig accessories etc. fromDivisional Head Quarter to worksite to and froincluding cost of P.O.L. all complete as directed.(a) Upto 100.00 Km distance from Divisional H.Q. |
| 5 | Transportation of all store materials like pipes,strainer, cone, socket, clamp, bentonite etc. fromDivisional Head Quarter to worksite to and froincluding cost of P.O.L. all complete as directed.(a) Upto 100.00 Km distance from Divisional H.Q |
| 6 | Transportation of air compressor from theDivisional Head Quarter to the drilling site withall accessories including cost of P.O.L. allcomplete as directed.(a) Upto 100.00 Km distance from Divisional H.Q. |
| 7 | Transportation of P.O.L. all complete as directed. |
| 8 | Construction of temporary accommodation andlow cost sanitary facility for drilling staff includingcost of camp materials viz. cots, tables, chairs,utensils, dresses, safety helmets etc. anddismantling the accommodation after completionof the work all complete as directed. |
| 9 | Providing water supply facilities at drilling site allcomplete as directed.DEEP TUBE WELL BY ROTARY/DTH/ODEX SYSTEM RIG(TO BE DONE BY CONTRACTOR / OUTSIDE AGENCY RIG)(a) By installing 1 Nos. of Singur hand pump |
| 10 | (b) By installing 1 No. 5 HP dewatering pump |
| 11 | Boring in soft soil / normal clay / sandy soil by bitof size either 5 5/8\\" or 6 7/8\\" or 7 7/8\\" andcollecting sample of soil at every 3.0 m depth orwherever there is a change of strata in sampleboxes with the distinguishing marks includingarranging and carriage of necessary boringmaterials / tools / bentonite etc. and withdrawingthe drill pipe for lowering well assembly etc allcomplete as directed |
| 12 | Reboring in soft soil / normal clay / sandy soil bybit of size either 8 1/2\\" or 9 5/8\\" or 12\\" fromeither 5 5/8\\" or 6 7/8\\" or 7 7/8\\" all complete asdirected |
| 13 | Reboring in soft soil / normal clay / sandy soil bybit of size either 14\\" or 16\\" or 18\\" from either 81/2\\" or 9 5/8\\" or 12\\" all complete as directed. |
| 14 | COMMON ITEMS FOR ROTARY/DTH/ ODEX SYSTEM RIG :Extraction of drilling pipes / bits against skinfriction at the end of each day and after completionof the operation including washing of the bore holeall complete as directed. |
| 15 | Labour charge for sinking, lowering, fitting, fixingin position of 150 mm dia U.P.V.C. pipe assemblycomprising of strainer, pipes and cone in potablewater bearing strata, washing the bore well etc. andsupplying necessary jointing materials includingcarriage of materials and cleaning and priming thetube well all complete as directed.(a) For 0 to 50 m depth |
| 16 | (b) For 50 to 100 m depth |
| 17 | (c) For beyond 100 m depth |
| 18 | Developing of the D.T.W. with air compressor,Make- Kirloskar / Cumins all complete as directed. |
| 19 | Supplying and packing pea gravel around theperiphery of casing including screening, washingetc. all complete as directed. |
| 20 | Supplying, fitting, fixing MS clamp of size 15 mmthick and 150 mm width having projection of 300mm and three holes of 20 mm dia for clamping theplates by 16 mm dia hexagonal bolts of length 75mm and nuts on both sides encircling the columnpipe including two coat of enamel paint over onepriming coat of different dia all complete asdirected and specified.(b) 150 mm dia |
| 21 | Cost of collecting water sample of DTW & water quality test report |
| 22 | Casing pipe and Column pipe and necessary fiting |
| 23 | Supplying, fitting and fixing pipes plain/bevel ended for casing, conforming to relevant IS codes of practice including supplying and fitting of tube well accessories, lowering of assembly pipes concentrically in the borehole followed by supplying and packing of pea gravel free from dirt, dust and other foreign materials in the annular space between the borehole and assembly pipes complete as directed by the Department II. PVCSUPREME /PRINCE / FUSION /SFMC Brandvi) 140mm diameter |
| 24 | Supplying fitting and fixing ISI approved PVC filter 3.00 metre long.v) 150mm diameter |
| 25 | Supplying, fitting and fixing suction pipes plain/bevel ended, conforming to relevant IS codes of practice including supplying and fitting of accessories, lowering of assembly pipes concentrically in the casing pipes complete as directed.A) G.I. pipea) TATA / SAIL (Medium)socket should be welded to the pipes.iii) 40mm diameter |
| 26 | Supplying fitting and fixing Pipes with all necessary fittings in exposed or in trenches including trenching and refilling the same etc complete as directed A) G.I. pipe with GI fittingsa) TATA / SAIL (Medium) v) 40 mm diameter |
| 27 | Supplying fitting and fixing check valve (non return valve) including thread to pipes.iii) 40mm diameter |
| 28 | Three phase Submersible motor pump set (Texmo / Crompton Greaves/ Aquatic/ CRI/ V-Guar suitable for 100 mm bore well and above. 5 HP STAGE 14 to 50 with MCB controlled Submersible motor pump set control panel along with D.O.L Starter ( Crompton Greaves/ Control & Switch Gear/ BCH/ L& T / Siemens make)0.5 TO 10 HP, 0.72 TO 20 A. |
| 29 | Wiring for circuit wiring with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts ( Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in existing surface conduit wiring system including connection as required. With 2 x 4 sq. mm. + earth continuity with 1x2.5 sq. mm. copper conductor cable |
| 30 | 150mm dia CI cone |
| 31 | Supplying and fixing clamp for 40mm dia column pipe 2 nos = 1 set |
| 32 | Complete earthing sysytem for pump and panel board |
| 33 | Cable rope for fitting and fixing the pump from the out side of the out side of the bore hole Please Enable Macros to View BoQ information |
| 34 | Distribution pipeline & Valves |
| 35 | Supplying fitting and fixing Pipes with all necessary fittings in exposed or in trenches including trenching and refilling the same etc complete as directed C) CPVC pipe with CPVC fittings(Using SUPREME/ PRINCE/ SFMC/ FUSION brand pipe)vi) 50mm (OD) diameter |
| 36 | Bronze/ Gunmetal Full Way Valve (Zoloto or Equivalent) |
| 37 | Slow Sand Filter |
| 38 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in- charge. |
| 39 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 40 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 41 | Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with :Cement mortar 1:6 (1 cement : 6 coarse sand). |
| 42 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. |
| 43 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 44 | Centering and shuttering including strutting, propping etc. and removal of form forWalls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. |
| 45 | Suspended floors, roofs, landings, balconies and access platform |
| 46 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size de rived from natural sources) |
| 47 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natu ral sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 48 | Providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not less than M-25, of size 1000 x 450x50 mm, reinforced with 8 mm dia four nos longitudinal & 9 nos cross sectional T.M.T. hoop bars, including providing 50 mm dia perforations sectional T.M.T. hoop bars, including providing 50 mm dia perforations flats of size 50 mm x 1.6 mm complete, all as per direction of Engineer- in-charge. |
| 49 | CEMENT PLASTER WITH A FLOATING COAT OF NEAT CEMENTCement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. |
| 50 | Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI 212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage.For vertical surface two coats @ 0.70 kg per sqm |
| 51 | For horizontal surface one coat @1.10 kg per sqm. |
| 52 | Coarse sand (zone III) for filter bed |
| 53 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. a) M. S. Angle (30x30x4 mm) |
| 54 | Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces),excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.63 mm thick with zinc coating not less than 275 gm/ m². |
| 55 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 56 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. |
| 57 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS:15801 UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, including trenching, refilling & testing of joints complete as per direction of Engineer-in-Charge.PN - 10 Pipe, 110 mm OD (SDR-11) |
| 58 | Providing and fixing G.I. pipes complete with G.I. fittings includingtrenching and refilling etc.External work50 mm dia nominal bore |
| 59 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :50 mm nominal bore |
| 60 | Supplying including installation, connection as approved by the Deptt., testing and commissioning of OPENWELL SUBMERSIBLE PUMP SET complete with submersible cable etc. as directed and specified by the deptt.3 HP Single Phase open well Submersible monoblock water cooled pump set (Crompton Greaves/ Aquatic/ CRI/ V-Guard make) . 220v 50hz, 2900 rpm with control panel along with D.O.L Starter ( Crompton Greaves/ Control & Switch Gear/ BCH/ L& T / Siemens make)0.5 TO 10 HP, 0.72 TO 20 A. |
AI Tender Summary
Tender Timeline
Jun 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysJul 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender