Tender For Construction Of 85 Individual Houses (25 Nos. Of Inspector/Si And 60 Nos. Of Pc/Hc) Under Own Your House Scheme At Pappinaickanahalli In Dharmapuri District.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
29 Jul 2026
18 days left
EMD
14.06 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dharmapuri → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of 85 Individual Houses (25 Nos. Of Inspector/Si And 60 Nos. Of Pc/Hc) Under Own Your House Scheme At Pappinaickanahalli In Dharmapuri District.
BOQ
| Sl. No. | Item Description |
| 1 | EW-AS-NC-IR) Earth work excavation for foundation in all soils (including refilling)EW-AS-NC-IR-2m) a) 0 to 2 mt. |
| 2 | EW-AS-OC-ER) Earth work excavation for Open foundation (excluding refilling)EW-AS-OC-ER-2m) a) 0 to 2 mt. |
| 3 | ST-FB&S-PC-AT) Providing Pre-Constructional Antitermite treatment |
| 4 | FL-FB-SCS) Supplying and filling in foundation and basement with filling crushed stone sand |
| 5 | FL-FB-HBSJ-40mm) Supplying and filling with 40mm size Hard broken stone jelly in foundation and basement |
| 6 | FL-FB-HBSJ-20mm) Supplying and filling with 20mm size Hard broken stone jelly in foundation and basement |
| 7 | FL-FB-EA) Filling in foundation and basement and other similar works with Excavated earth |
| 8 | FL-FB-GR) Supply and filling in foundation and basement with gravel (including Tax collected by Govt per Cum) |
| 9 | CN-FB-PCC-1:5:10) Plain cement concrete 1:5:10 (One of cement, five of crushed stone sand and ten of hard broken stone Jelly including Mortar Plasticizer (Liquid) at 200ml per bag) for foundation and basement using 40 mm gauge hard broken stone jelly |
| 10 | CN-FB-PCC-1:2:4) Plain cement concrete 1:2:4 (One of cement two of crushed stone sand and four of Hard Broken Stone jelly) (including Mortar Plasticizer (Liquid) at 200ml per bag) using 20mm gauge hard broken stone jelly |
| 11 | CN-FB-PCC-1:8:16) Plain cement concrete 1:8:16 (One of cement, eight of crushed stone sand and sixteen of broken brick jelly including Mortar Plasticizer (Liquid) at 200ml per bag) for foundation and other similar works using 20mm gauge broken Brick Jelly |
| 12 | CN-FB-PCC-1:3:6) Plain cement concrete 1:3:6 (one of cement, three of crushed stone sand and six of hard broken stone jelly including Mortar Plasticizer (Liquid) at 200ml per bag) for foundation and other similar works using 20mm gauge hard broken stone jelly |
| 13 | CN-FB-PCC-1:4:8) Plain cement concrete 1:4:8 (one of cement, four of crushed stone sand and eight of hard broken stone jelly including Mortar Plasticizer (Liquid) at 200ml per bag) for foundation and other similar works using 40mm gauge hard broken stone jelly |
| 14 | CN-SS-PCS-M20-20) Supplying and fixing of precast cement concrete slab for cupboard / ward robes, shelves, cover slab for chambers baffle walls etc., and other similar works 20mm thick using standardised concrete mix M20I. 20mm thickCN-SS-PCS-M20-20-(GF)a) In Stilt / Ground Floor |
| 15 | CN-F&S-PCS-M20-40) Supplying and fixing of precast cement concrete slab for cupboard/ ward robes, shelves, cover slab for chambers, baffle walls etc., and other similar works 40mm thick using standardised concrete mix M20II. 40mm thickCN-FB-PCS-M20-40)a) In Foundation and Basement |
| 16 | CN-SS-PCS-M20-40-(GF)b) In Stilt / Ground Floor |
| 17 | CN-F&S-RCC-M20) Providing and laying in position, Standardised Concrete Mix M-20 Grade (Using crushed stone sand)CN-FB-RCC-M20)a) In Foundation and Basement |
| 18 | CN-SS-RCC-M20-(GF)b) In Stilt / Ground Floor |
| 19 | BW-FB-KB-CM 1:5) Brick work in Cement Mortar 1:5 (One of cement and five of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) using Kiln burnt country bricks of size 8¾”x4¼”x2¾” (22x11x7cm) in foundation and basement |
| 20 | BW-MW-KB-CM 1:6) Brick work in Cement Mortar 1:6 (One of cement and six of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) using Kiln burnt country bricks of size 8¾”x4¼”x2¾” (22x11x7cm) for super structure in the following floorsBW-SS-KB-CM 1:6-(GF)a) In Ground Floor |
| 21 | BW-PW 110mm-KB-CM 1:4) Brick partition wall in Cement Mortar 1:4 (One of cement and four of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 110mm thick for super structure in the following floors using Kiln burnt country bricks of size 8¾”x4¼x2¾” (22x11x7cm)BW-PW 110mm SS-KB-CM 1:4-(GF)b) In Ground Floor |
| 22 | BW-PW 70mm-KB-CM 1:4) Brick partition walls 70mm thick using Kiln burnt country bricks of size 8¾”x4¼”x2¾” (22x11x7cm) in cement mortar 1:4 (One of cement and four of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) for super structure in the following floors BW-PW 70mm SS-KB-CM 1:4-(GF)a) In Ground Floor |
| 23 | BW-PW 50mm-KB-CM 1:4) Brick partition walls 50mm thick using kiln burnt country bricks of size 8¾”x4¼”x2” (22x11x5cm) in cement mortar 1:4 (One of cement and four of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) for super structure in the following floorsBW-PW 50mm SS-KB-CM 1:4-(GF)a) In Ground Floor |
| 24 | FA-EJ-FP-BIT) Supplying and fixing of 20mm thick Bituminous Expansion joint filler Pad |
| 25 | CN-FL-PCC-1:5:10) Flooring with a bed of CC 1:5:10 (one of cement, five of crushed stone sand and ten of hard broken stone jelly including Mortar Plasticizer (Liquid) at 200ml per bag) using 40mm size hard broken stone jelly |
| 26 | PL-FL-CM 1:4-20mm) Plastering the top of flooring in CM 1:4 (One of cement and four of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 20mm thick |
| 27 | CN-FL-Ellis-Chip) Finishing the top of flooring with cement concrete 1:3 (One of cement and three of blue granite chips of size 10mm and below) 20 mm thick Ellispattern Flooring (No Sand) |
| 28 | CN-TEC-WC-NS) Weathering Course with concrete broken brick jelly 20mm gauge |
| 29 | TL-RO-PT-CM 1:3) Finishing top of roof with one course of Pressed Tiles of approved superior quality of size 23cmx 23cmx20mm thick laid over weathering course in CM 1:3 (One of cement and three of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag,) 12mm thick mixed with Water proofing compound at 2% |
| 30 | TL-WL-GZT-CM 1:2) Supplying and fixing of Colour glazed tiles (Best approved quality and the same shall be got approved from the Executive Engineer before using) over cement plastering in CM 1:2 (One of cement and two of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 10mm thick |
| 31 | TL-FL-CT-CM 1:3) Supplying and fixing of colour Ceramic Tiles Anti skid without corrugated design for flooring and other similar works (Best approved quality, colour and shade shall be got approved from the Executive Engineer before using) over cement mortor 1:3 (One of cement and three of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 20mm thick |
| 32 | TL-FL-GS-D-Nos) providing double nosing to the edges of granite slab of 20mm thick including labour, power consumption, tools & plants required, true to horizontal etc., for kitchen platform in all floors and as directed by the departmental officers. |
| 33 | TL-FL-IVT-CM 1:3) supplying and fixing of vitrified tiles of best approved quality (ivory) 600x600x8mm for flooring and other similar works (the colour and shade shall be got approved from the executive engineer before using) over cement mortar 1:3 (one of cement and three of curshed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 20mm thick |
| 34 | TL-FL-CDT-CM 1:3) Supply and laying superior variety Concrete Designer tiles for flooring in CM 1:3 (One of Cement and three of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 20mm thick |
| 35 | FW-FW-WOS-RCC) Providing Form work and centering for reinforced cement concrete worksFW-FB-WOS-FB)a) For Column footings, plinth beam, Grade beam, Raft beam, Raft slab etc., |
| 36 | FW-SS-WS-PS)b) Plain surfaces such as Roof slab, floor slab, Beams, lintels, lofts, sill slab, staircase waist, portico slab and other similar works |
| 37 | FW-SS-WS-CO)c) For Square and rectangular columns and small quantities such as sunshade, parapet cum drops window boxiing, fin projection and other similar works. |
| 38 | FW-SS-WS-VW)d) For Vertical wall |
| 39 | PL-OU-CM 1:5-12mm) Plastering with CM 1:5 (One of cement and five of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 12mm thick |
| 40 | PL-IN-CM 1:4-12mm) Plastering with CM 1:4 (one of cement and four of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 12mm thick |
| 41 | PL-CL-CM 1:3-10mm thick) Special ceiling plastering in cement mortar 1:3 (One of cement and three of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 10mm thick |
| 42 | PL-OU-CM 1:5-Bor) Plastering in CM 1:5 (One of cement and five of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 12mm thick for border finish in all floorsPL-OU-CM 1:5-150mm)a) 150mm wide border |
| 43 | PL-OU-CM 1:5-75mm)b) 75mm wide border |
| 44 | PL-OU-CM 1:5-50mm)c) 50mm wide border |
| 45 | PA-CE-WW-SL 3C) White washing three coats using clean shell lime slaked |
| 46 | PA-IN-WP-2C BPC) Painting the new wood work with two coats of approved first class synthetic enamel ready mixed paint in addition to one coat of Primer |
| 47 | PA-Ex-IW-2C EP) Painting the new Iron work and other similar works such as PVC /ASTM Pipes, Kerb Stone and grills with two coats |
| 48 | PA-IN-WP-2CP BWP) Supplying and applying of full putty one coat with aproved make wall putty for smooth finishing the new cement plastered walls |
| 49 | PA-CE-WP-2C) Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothly with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. |
| 50 | PA-IN-PEP-2C BPC) Painting the New walls with two coats of approved best ready mixed plastic emulsion paint for inner walls |
| 51 | PA-Ex-EEP-2C BPC) Painting the New walls with two coats of approved best ready mixed exterior emulsion paint outer walls in addition to one coat of approved primer coat |
| 52 | PA-IN-PEP-1C) Painting the ceiling with one coat Plastic Emulsion PAINT including a priming coat over cement plastered surface including clean removal of dirt and dust etc., complete including cost of necessary brushes, labour charges, putty etc., complying with relevant standard specification. (The paint should be supplied by the contractors at his own cost.The quality and shade of the paint should be got approved from the Executive Engineer before use.) |
| 53 | PA-IN-MP-2C EP) The new wood work with two coats of best melamine polish/varnish of approved quality and brand including preparation of surface etc.. The rate is inclusive the cost of all material, labour charges and finishing neatly etc., complete complying with standard specification and as directed by the departmental officers. |
| 54 | JN-WR-TWF-WRF) Supplying and fixing of Teak Wood wrought and put up for frames of doors, windows, ventilators, cupboard and any other similar joinery works JN-WR-TWF-A 2m F)a. T.W. over 2 m & below 3 m |
| 55 | JN-WR-TWF-B 2m F)b) Teak wood below 2 m length |
| 56 | JN-D-DC-M) Supply and fixing of best approved superior variety magnetic door catches |
| 57 | JN-D-MS-HF) Supplying of Mild Steel hold fasts horizontally twisted of size 230x40x4mm |
| 58 | JN-UPVC D-SO.P-WF) Solid UPVC Door Shutters using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid UPVC Sheets. Shutter using 5mm thick solid UPVC Sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm with suitable rabate for housing the shutter Solid panel UPVC door with frame |
| 59 | JN-V-UPVC-LV) Supply and fixing of UPVC (Un plasticized polyvinyl chloride) Louvered ventilators |
| 60 | JN-UPVC W-UPVC-OP W) Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) |
| 61 | JN-TWPD-SL-75mm S-BF-2.1H) Supplying and fixing of Teak wood Panelled Single leaves door shutters with Brass fittings Suitable for Door of sizeJN-TWPD-SL-75mm S-BF -1x2.1)c) 1000 x 2100 mm |
| 62 | JN-BWR D-SL-Ply-2.1H) Supplying and fixing of T.W. single leaf Door shutters using 9 mm tk. phynol bonded BWR plywood shutters with brass screwsJN-BWR D-SL-Ply-0.9x2.1)b) 900 x 2100 mm |
| 63 | JN-SC D-SL-FLS-2.1H) Supplying and fixing of Single leaf Solid core flush door shutters using boiled water resistance (BWR) teak wood ply as per IS 303-1989, the cross band and face veneers are to be banded with phenol formaldehyde synthetic resin in hot press both sides and manufacturing the shutter by using quality timber of termite proof and seasoned to moisture content not more than 10%, hot pressed with hydraulic press at a temperature of 150o to the norms as per IS 2002-1983 and TW Ply on Both side with teak wook lipping around, 35mm thick including cost and fixing of Aluminium furniture fittingsJN-SC D-SL-FLS-0.9x2.1)b.900mm x 2100mm |
| 64 | MW-MS-GR) Supplying and fixing Mild Steel grills as per the design approved |
| 65 | RE-RTS-Fe-NC) Supplying, fabricating and placing in position of Mild steel Grills / Ribbed Tor Steels (without cement slurry) |
| 66 | TL-FL-GS-CM 1:3-(GF) Supplying and laying of following colour Granite slabs (superfine polished with machine cut edges) of size 4'-0'x 2'-0' of 18 to 20 mm thick for flooring (Best approved quality and the same shall be got approved from the Executive Engineer before using) over cement plastering in CM 1:3 (One of cement and three of crushed stone sand) 20mm thick including Cost of Mortar Plasticizer (Liquid) at 200ml per bag TL-FL-JGS-CM 1:3) a. Jet Black |
| 67 | RW-KS-CC 1:3:6-PC) Supplying and fixing of pre-cast kerb stone of size 450x300x150mm made in CC 1:3:6 (One of cement, three of crushed stone sand and six of hard broken stone jelly) using 20mm size hard broken stone jelly including Cost of Mortar Plasticizer (Liquid) at 200ml per bag, the cost of Kerb stone moulding, laying, curing, transporting, pointing and as directed by the departmental officers.. |
| 68 | WS-EX-RWD-PVC) Supplying and fixing of following dia PVC SWR pipe with ISI mark conforming to IS 13952:1992- type `A` for Rain water down fall pipe with relevant specialsWS-EX-RWD-PVC 110b. 110mm dia PVC SWR pipe |
| 69 | WS-IN-HCP-LBT) Supplying and fixing of half turn C.P Long body Tap of 15mm dia |
| 70 | WS-IN-HCP-SBT) Supplying and fixing of half turn C.P short body Tap of 15mm dia |
| 71 | WS-EX-WST-HDPE) Supply and erection of Rotational Moulded Polyethylene water storage tanks (HDPE Cylinderical vertical type) for outdoor use having capacity of following litres (excluding free board) of approved brand (superior variety) with ISI Mark (marked with tank itself) with top lid with provisions of locking including necessary specials and fittings WS-EX-WST-1000 lt)(c)1000 litres |
| 72 | SA-IN-SS-S) Supply, delivery and fixing of Stainless steel sink following size using 32mm dia ‘B’ class G.I. waste water pipe and 32 mm dia C.P. waste coupling (sample should be got approved from the Executive Engineer before use) true to spirit level including finishing neatly, and fixing in position complying with relevant standard specifications etc., complete in all floors.SA-IN-SS-600 x 600 x 200) c) 600mm x 600mm x 200mm |
| 73 | WS-EX-ASTM-PVC) Supplying, laying, fixing and jointing the following PVC pipes as per ASTM D - 1785 of suitable schedule (40/60/80) of wall thickness not less than the specified in IS 4985 suitable for plumbing by threading of wall thickness including the cost of suitable PVC/UPVC/GI specials /GM specials WS-EX-ASTM-32 PVC)a) 32mm dia |
| 74 | WS-EX-ASTM-25 PVC)b) 25mm dia |
| 75 | WS-IN-HW-20 FC) Supplying, laying and fixing of the following Pipe of best approved quality for Hot water line fully concealed in walls including cost of pipes and specials, labour charges for laying, jointing, testing and redoing the dismantled portions with neat finish etc., all complete and as directed by the departmental officers.WS-IN-HW-20 GI)a. 20mm dia G.I. pipe |
| 76 | SA-IN-WB-P) Supplying and fixing of following porcelin wash hand basin , superior variety of size 550x400mm with all accessories such as powder coated cast iron brackets, 32mm dia C.P. waste coupling, Rubber plug and aluminium chain, 32mm dia B class G.I. / PVC waste pipe, Angle Valve, 15mm dia Nylon connection, 15mm dia Brass Nipples, 15mm C.P. pillar tap & required grating etc., complete in all respects (wash hand basin shall be got approved by the Executive Engineer before fixing).SA-IN-WB-WWOP)b) White without pedastal wash hand basin |
| 77 | SA-IN-VSC-PVC) Supplying and fixing the following dia PVC(SWR) pipe with ISI mark confirming to IS 13952:1992- type `A` with PVC cowl and relevant specials confirming to IS 14735 including jointing with seal ring confirming to IS 5382a) 110mm dia PVC SWR pipe of 3metre with required PVC cowl & PVC specials etc., all complete. |
| 78 | SA-IN-NT-PVC) Supplying and fixing of PVC Nahani Trap not less than 75mm 4 way / 2 way (Superior variety) having minimum of water seal of 50mm confirm to relevant I.S. specifications with its latest amendments including resting on the bed of brick jelly concrete 1:5:10 (One of cement, five of crushed stone sand and ten of 40 mm gauge brick jelly) including Mortar Plasticizer (Liquid) at 200ml per bag etc., complete |
| 79 | SA-IN-IWC-GF) Supplying and fixing of Indian Water Closet white glazed (oriya type) of size 580 mm x 440 mm of approved make with ISI mark (to be got approved from EE before use) with PVC SWR grade 'P' or 'S' trap (Using crushed stone sand) (including Mortar Plasticizer (Liquid) at 200ml per bag)(In Ground floor) |
| 80 | SA-IN-EWC-W) Supplying and fixing EWC superior variety (white) 500mm with 'P' or 'S' trap (Using crushed stone sand) (including Mortar Plasticizer (Liquid) at 200ml per bag) |
| 81 | SA-Ex-SWR P-Dia) Supplying and fixing of PVC SWR pipe (Soil line) with ISI mark - type 'B'.SA-Ex-SWR P-110)a) 110mm dia PVC SWR pipe including all required PVC specials etc., all complete., |
| 82 | SA-Ex-SWR P-75)b) 75mm dia PVC SWR pipe including all required PVC specials etc., all complete., |
| 83 | SA-Ex-SWR P-50) Supplying, laying and concealing the 50mm dia PVC (SWR) pipe with ISI mark confirmed to IS 13952-1992 Type-B for waste water line |
| 84 | SA-Ex-SN8-Dia) Supplying, laying and jointing the following dia UPVC Non Pressure pipe of SN8 SDR 34 (S 16.5) as per IS 15328/2003SA-Ex-SN8-110)a) 110 mm dia UPVC Non Pressure pipe |
| 85 | SA-Ex-PVC T-Dia) Supplying and fixing PVC Equal Tee as per BIS 7834/1975 SA-Ex-PVC T-110)a) 110 mm dia PVC Equal tee |
| 86 | Supply and Fixing of CP Heavy Duty Bottle Trap 32mm with ISI mark etc., all complete and as directed by the departmental officers. |
| 87 | SA-IN-Spl.-Fit) Supplying and fixing of best approved quality of following CP water supply/Sanitary fittings confirming to ISI specification including cost and labour charges for fixing etc., complete complying with relevant standard specifications and as directed by the departmental officers (The brand and quality of the materials should be got approved from the Executive Engineer before use)SA-IN-CP-2WBC) a) Supply and Fixing of 15mm dia CP Two way tap bib cock with health faucet |
| 88 | IN-FT-Alu HR-20mm) Supplying and fixing of 20mm dia aluminium hanger rods to the required length |
| 89 | IN-FT-Alu TR-75cm) Supplying and fixing of Aluminium Towel Rail of 75cm long |
| 90 | IN-FT-Alu CS-5P) Supplying and fixing of Aluminium plate with five pin for Coat Stand |
| 91 | IN-FT-IC PH-8 G) Providing and fixing iron Chromium plated 8 gauge Picture hook |
| 92 | LW-TP-TP-T) Supply and planting Avenue Trees |
| 93 | LW-TP-TG-Tri S) Supplying and fixing of Triangular shape chicken mesh Tree guard |
| 94 | MW-SNB-MS-N&LOB) Supplying Fabrication and Erection in position of M.S. scheme name and layout board |
| 95 | IN-FT-BM-PVC) supplying and fixing of BEVELED EDGE MIRROR of approved quality and brand of following size shelf type mounted in the PVC/ FIBRE GLASS FRAMED with necessary hard board backing including labour for fixing in position etc., complete and as Directed by the Departmental officers.IN-FT-BM-600x450) b) 600mmx450mm shelf type |
| 96 | EL-IN-EP-LP) Wiring with 1.5 sqmm PVC insulated single core multistrand fire retardant flexible copper cable with ISI mark confirming to IS 694/1990 1.1 K.V. grade cableEL-IN-EP-WCR)a) Light point with ceiling rose |
| 97 | EL-IN-EP-WOCR)b) Light point with bakelite battern type holder |
| 98 | EL-IN-EP-CB)c) Point wiring for calling bell/buzzer with push type switch with required Buzzer. |
| 99 | EL-IN-EP-FP) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable for Fan Point |
| 100 | EL-IN-EP-SLP) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable for Stair case light point |
| 101 | EL-IN-EP-SBI) Wiring with 1.5 sqmm copper PVC insulated unsheathed single core 1.1 K.V. grade cable for 5 Amps 5 Pin plug Socket Point @ Switch Board Itself |
| 102 | EL-IN-EP-CP) Wiring with 1.5 sqmm copper PVC insulated unsheathed single core 1.1 KV grade cable for 5 Amps 5 pin Plug Socket Point at Convenient Places |
| 103 | EL-IN-EP-PS) Supplying and fixing 15 Amps 3 pin plug type socket with switch |
| 104 | EL-IN-EF-ES) Earthing and Earth connections: Providing Earthing Station using pipe electrode as per IS 3043 using 2.5m of 40mm and 1.0m of 20mm B-class GI pipe including all requirements |
| 105 | EL-IN-EF-MB) Supplying and fixing best country wood meter cupboard with shutters double leaves with 230mmx25mm size CW planks for alround sides 62.5 mm x31.25mm styles and rails for shutters and 75mm x 25mm weld mesh of 6 and 10 gauge for panels including labour charges for fixing in position of shutters and cost of ‘L’ clamps. 6 nos of size 150x150mm size with 25mmx4mm MS flats, 1nos of 6” x 1/2” aluminium aldrop with bolts and nuts. 6 nos of 3” size I.O. butt hinges with screws 2 nos of 2” size I.O. hooks, eyes, TW plugs, screws etc. complete and as directed by the Departmental officers and as per drawings. |
| 106 | EL-IN-EF-FH) Supply and fixing of best approved superior variety concealed type Fibre box with M.S. Fan Hook |
| 107 | EL-IN-EF-AC) Charges for assembling and fixing of ceiling fan of different sweep with necessary connections and fixing of fan regulator |
| 108 | EL-IN-EF-F) Supply and delivery of following Electric Ceiling fan with ISI mark with blades and double ball bearing, capacitor,etc., complete EL-IN-EF-48'F)a) 48\\"\\" Electric fan 1200mm sweep |
| 109 | EL-IN-EF-EF225) Supplying and fixing of 225 mm dia sweep AC exhaust fan of approved ISI quality |
| 110 | EL-IN-EF) Supplying & fixing of LED bulbs suitable for fixing it to pendent / bakelite battern holder of best approved variety etc., all complete and as directed by the departmental officers.EL-IN-EF-9W) a) 9 watts LED bulb |
| 111 | EL-IN-EF-12W)b) 12 watts LED bulb |
| 112 | EL-IN-LED.F-TL) Supplying and fixing of 4'18 watts crystal LED tube light and fixing the tube light fittings |
| 113 | EL-IN-EF-BH) Supplying and fixing of water tight Bulk head fitting suitable for 12W LED bulb with guard |
| 114 | EL-EX-EF-SL-25W) Supplying and fixing of 25 watts LED bulb with Street light fittings arrangements |
| 115 | EL-IN-WR-2x2.5m²) Run of main with 2 wires of2.5 sq.mm. PVC insulated single core multi strand fire retardant flexible copper cable |
| 116 | EL-IN-WR-2x4m²) Supply and Run off main with 2 wires of 4 sq.mm. PVC insulated single core multi strand fire retardant flexible copper cable |
| 117 | EL-IN-WR-4x4m²) Run off 4 wires of 4 Sq mm. PVC insulated single core multi strand fire retard flexible copper cable (for EB service connection ). |
| 118 | EL-IN-EP-ELCB-TP) Supply and fixing of electro mechanically operated three phase earth leakage circuit breaker/residual current circuit breaker (ELCB/RCCB) combined with over load and short circuit protection having a rupturing capacity of 6 KA with 30 milliamps fixed setting sensitivity and rates for 25 A insuitable sheet steel enclosure conforming to IS 12640/1988. Including cost of ELCB/RCCB on fully concealed suitable MS box with necessary inter connections and earth connections using copper cable including cost of all materials etc., all complete. |
| 119 | EL-IN-EF-TPN) Supply and fixing of follwing Triple pole main switch with fuse and neutral link on a suitable well varnished teak wood board including necessary interconnection, cost of all materials etc., all complete as directed by the departmental officers. (The quality should be got approved by the Executive Engineer before use).EL-IN-EF-TPN-32a) a) 32 amps triple pole main switch with fuse and neutral link |
| 120 | EL-IN-EF-TW P-450x375x20) S & F of 450 x 375 x 20mm thick TW plank |
| 121 | EL-IN-EF-AC Plug - 20A) Supply and fixing of 20A Flush type Wall Socket, 20A DP MCB and 32A DP MCB complete set for AC Plug in flush with wall with earth connection (For AC Plug) |
| 122 | EL-IN-EF-8 SWG) Supplying and run of 8 SWG GI wire for earth connection on wall / below ground level |
| 123 | WS-IN-HW-20 FC)Supplying, laying and fixing of the following Pipe of best approved quality for Hot water line fully concealed in walls including cost of pipes and specials, labour charges for laying, jointing, testing and redoing the dismantled portions with neat finish etc., all complete and as directed by the departmental officers.WS-IN-HW-20 CPVC) c. 20mm dia CPVC pipe |
| 124 | EL-V DB-4w MCB-63A,OW) Supply and fixing of 4 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63 A 4 P MCB as incoming and 12 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only. Lower End Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysJul 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender