Tender For Construction Of New Building For Kgbv Boarding School At Senthanadu In Kallakurichi District.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
14 Jul 2026
12 days left
EMD
1.38 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kallakurichi → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of New Building For Kgbv Boarding School At Senthanadu In Kallakurichi District.
BOQ
| Sl. No. | Item Description |
| 1 | EW-AS-NC-IR) Earth work excavation for foundation in all soils and sub-soils to the required depth as may be directed except in hard rock requiring blasting but inclusive of shoring, strutting, and bailing out water wherever necessary and refilling the sides of foundation with excavated earth in 150mm thick layers (Including Refilling)EW-AS-NC-IR-2m)a. 0 to 2 mt. |
| 2 | EW-AS-NC-IR-3m)b. 2 to 3 mt. |
| 3 | FL-FB-HBSJ-H-core) Supplying and laying of Hard core layer 300mm consolidated thickness using 60% of HBGSJ (ISS) metal 80mm to 63mm and 40% of HBGSJ(ISS) metal 40mm to 10mm and laying crushed stone sand 50mm thickness over the metal layer for filling the voids |
| 4 | FL-FB-SCS) supplying and filling in foundation and basement with filling crushed stone sand in layers of 150 mm thickness |
| 5 | CN-FB-PCC-1:5:10) Plain cement concrete 1:5:10 (One of cement, five of crushed stone sand and ten of hard broken stone Jelly including Mortar Plasticizer (Liquid) at 200ml per bag) for foundation and basement using 40 mm gauge hard broken stone jelly |
| 6 | CN-F&S-RCC-M25) Providing and laying in position, Standardised Concrete Mix M-25 Grade in a accordance with IS:456-2000 using 20mm and downgraded hard broken granite stone jelly for the all RCC items of worksCN-FB-RCC-M25) a. In Foundation and basement |
| 7 | CN-SS-RCC-M25-(GF) b. In Stilt /Ground Floor |
| 8 | CN-SS-RCC-M25-(1F)c. In First Floor |
| 9 | CN-SS-RCC-M25-(2F)d. In Second Floor |
| 10 | BW-FB-FLB-CM 1:5) Brick work in cement mortar 1:5 (One of cement and five of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) using Fly ash bricks of size 230x110x70mm having the compressive strength of not less than 100 Kg/CM² in foundation and basement |
| 11 | FL-FB-GR) supplying and filling in foundation and basement with gravel in layers of 150 mm thickness well watered, rammed and consolidated complying with relevant standard specifications |
| 12 | CN-FL-PCC-1:5:10) Plain cement concrete 1:5:10 (One of cement, five of crushed stone sand and ten of hard broken stone Jelly including Mortar Plasticizer (Liquid) at 200ml per bag) for foundation and basement using 40 mm gauge hard broken stone jelly |
| 13 | ST-FB&S-PC-AT) Providing pre-constructional Antitermite treatment including cost of chemicals labour as per standard specifications |
| 14 | BW-MW-FLB-CM 1:6) Brick work in Cement Mortar 1:6 (One of cement and six of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) using Fly ash bricks of size 230x110x70mm having the compressive strength of not less than 100 Kg/CM² for superstructure in the following floors BW-SS-FLB-CM 1:6-(GF)) b. In Ground Floor/Stilt floor |
| 15 | BW-SS-FLB-CM 1:6-(1F)) c. In First floor |
| 16 | BW-SS-FLB-CM 1:6-(2F)d. In Second floor |
| 17 | BW-PW 110mm-FLB-CM 1:4) Brick partition wall in Cement Mortar 1:4 (One of cement and four of Crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 110mm thick for super structure in the following floors using Fly ash bricks of size 230x110x70mm having the compressive strength of not less than 100 Kg/CM² in the following floors BW-PW 110mm FB-FLB-CM 1:4) a. In Foundation and basement |
| 18 | BW-PW 110mm SS-FLB-CM 1:4-(GF)b. In Ground Floor/Stilt floor |
| 19 | BW-PW 110mm SS-FLB-CM 1:4-(1F)c. In First floor |
| 20 | BW-PW 70mm-FLB-CM 1:4) Brick partition walls 70mm thick using Kiln burnt country bricks of size 8¾”x4¼”x2¾” (22x11x7cm) in cement mortar 1:4 (One of cement and four of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) for super structure in the following floors BW-PW 70mm SS-FLB-CM 1:4-(GF)b. In Stilt / Ground Floor |
| 21 | BW-PW 70mm SS-FLB-CM 1:4-(1F)c. In First Floor |
| 22 | BW-PW 50mm-KB-CM 1:4) Brick partition walls 50mm thick using kiln burnt country bricks of size 8¾”x4¼”x2” (22x11x5cm) in cement mortar 1:4 (One of cement and four of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) for super structure in the following floors BW-PW 50mm SS-KB-CM 1:4-(GF)b. In Ground Floor/Stilt floor |
| 23 | BW-PW 50mm SS-KB-CM 1:4-(1F)c. In First Floor |
| 24 | PL-IN-CM 1:4-12mm) Plastering with CM 1:4 (one of cement and four of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 12mm thick finished with neat cement including providing band cornice, ceiling cornice, curing, scaffolding etc., complete |
| 25 | PL-FL-CM 1:4-20mm) Plastering the top of flooring in cm 1:4 (one of cement and four of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 20mm thick including surface rendered smooth |
| 26 | CN-FB-PCC-1:8:16) Plain cement concrete 1:8:16 (One of cement, eight of crushed stone sand and sixteen of broken brick jelly including Mortar Plasticizer (Liquid) at 200ml per bag) for foundation and other similar works using 20mm gauge broken Brick Jelly |
| 27 | SA-Ex-SFRC-S) Supply and delivery at site and fixing of SFRC manhole cover with frame with locking arrangement SA-Ex-SFRC-750 x 750)c. 750 mm x 750 mm |
| 28 | FW-FW-WOS-RCC) Providing Form work and centering for reinforced cement concrete works including supports and strutting up to 3.30m height for plane surfaces as detailed below FW-FB-WOS-FB) a. For Column footings, plinth beam, Grade beam, Raft beam, Raft slab etc., |
| 29 | FW-SS-WS-PS) b.Plain surfaces such as Roof slab, floor slab, Beams, lintels, lofts, sill slab, staircase waist, portico slab and other similar works |
| 30 | FW-SS-WS-CO) c.For Square and rectangular columns and small quantities such as sunshade, parapet cum drops window boxiing, fin projection and other similar works. |
| 31 | FW-SS-WS-VW)d.For vertical walls |
| 32 | FW-SS-WS-CS)f.Curved surface |
| 33 | TL-FL-Cudda-20mmtk) Providing Cuddappah slab of 20mm thick, finishing with two sides for cupboard, ward-robes, shelves , kitchen platform slabs, sink and other similar works including finishing and fixing in position complying with relevant Standard specifications etc., completeTL-FL-Cudda-20mmtk-(GF)a. Ground Floor |
| 34 | TL-FL-Cudda-20mmtk-(1F))b. First Floor |
| 35 | TL-FL-Cudda-40mmtk) Providing Cuddappah slab of 20mm thick, finishing with two sides for cupboard, ward-robes, shelves , kitchen platform slabs, sink and other similar works including finishing and fixing in position complying with relevant Standard specifications etc., completeTL-FL-Cudda-40mmtk-(GF)a. Ground Floor |
| 36 | TL-FL-Cudda-40mmtk-(1F))b. First Floor |
| 37 | MW-MS-GR) Supplying and fixing Mild Steel grills as per the design approved to verandah enclosure or gate including one coat of primer and labour for fixing in position etc. all complete |
| 38 | PA-Ex-IW-2C EP) Painting the new Iron work and other similar works such as PVC /ASTM Pipes, Kerb Stone and grills with two coats of approved first class synthetic enamel ready mixed paint of approved quality and brand, the paint should be supplied by the contractor at his own cost. (The quality and the brand of paint should be got approved by the Executive Engineer before use) |
| 39 | PA-IN-WP-2C BPC) Painting the new wood work with two coats of approved first class synthetic enamel ready mixed paint in addition to one coat of primer of approved quality and shade, the paint should be supplied by the contractor at his own cost (The quality and the shade of paint should be got approved by the Executive Engineer before use) |
| 40 | JN-UPVC W-UPVC-OP W) UPVC Window Specification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile |
| 41 | JN-V-UPVC-LV) UPVC Ventilator Specification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile |
| 42 | JN-WPC D-SL-D) Supply & Fixing of WPC Decora Door set where the Door shall be extruded as a single core door with Lead-Free compound and the surface shall have Decora Design |
| 43 | PA-CE-WP-2C) Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothly with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. |
| 44 | PL-CL-CM 1:3-10mm thick) Special ceiling plastering in cement mortar 1:3 (One of cement and three of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 10mm thick |
| 45 | PA-IN-PEP-1C BPC) Painting the false ceilling / New walls with one coat of 1st class ready mixed PLASTIC EMULSION PAINT of best approved quality colour and shade including a priming coat over cement plastered surface including clean removal of dirt and dust etc., complete |
| 46 | PL-OU-CM 1:5-12mm) Plastering with CM 1:5 (One of cement and five of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 12mm thick finished with neat cement, including providing band cornice, ceiling cornice, curing, scaffolding, etc., complete |
| 47 | PA-IN-PEP-2C BPC) Painting the Inner wall New walls with two coats of 1st class ready mixed PLASTIC EMULSION PAINT of best approved quality colour and shade including a priming coat over cement plastered surface including clean removal of dirt and dust etc., complete including cost of necessary brushes, labour charges, putty etc., complying with relevant standard specification. |
| 48 | PA-Ex-EEP-2C BPC) Painting the new walls with two coats of approved best Exterior Emulsion paint of best approved quality color and shade in addition to one coat of approved primer paint over cement plastered wall surfaces including cost of Exterior Emulsion paint, putty, brushes, etc., all complete |
| 49 | PL-WPC-CM 1:3-12mm) Plastering in cm 1:3 (one of cement and three of crushed stone sand (One of cement and three of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 12mm tk. mixed with water proof compound at 2% by weight of cement for sump including scaffolding curing, finishing etc., complete |
| 50 | PL-OU-CM 1:5-Bor) Plastering in CM 1:5 (One of cement and five of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 12mm thick for border finish in all floors for elevation purposes, scaffolding, curing, finishing etc., all complete.PL-OU-CM 1:5-150mm) a) 150mm wide border |
| 51 | PL-OU-CM 1:5-75mm)b) 75mm wide border |
| 52 | PL-OU-CM 1:5-50mm)c) 50mm wide border |
| 53 | CN-TEC-WC-NS) Weathering Course with concrete broken brick jelly 20mm gauge in pure burnt lime stone slaked and screened (No Sand) over RCC Roof Slab with proportion of brick jelly to lime (fat lime) being 32: 12 1/2 by volume well beaten with wooden beaters for giving the required slope and thickness complying with relevant standard specification and as directed by the departmental officers. |
| 54 | TL-RO-PT-CM 1:3) Finishing top of roof with one course of Pressed Tiles of approved superior quality of size 23cmx 23cmx20mm thick laid over weathering course in CM 1:3 (One of cement and three of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag,) 12mm thick mixed with Water proofing compound at 2% by weight of cement used and pointed neatly with the same cement mortar mixed with water proofing compound including curing etc., as per standard specifications. |
| 55 | TL-WL-GZT-CM 1:2) Supplying and fixing of Colour glazed tiles (Best approved quality and the same shall be got approved from the Executive Engineer before using) over cement plastering in CM 1:2 (One of cement and two of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 10mm thick |
| 56 | TL-FL-CT-CM 1:3) Supplying and fixing of colour Ceramic Tiles Anti skid of size 305 x 305 x 6mm without corrugated design for flooring and other similar works (Best approved quality, colour and shade shall be got approved from the Executive Engineer before using) over cement mortor 1:3 (One of cement and three of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 20mm thick |
| 57 | TL-FL-SSL-CM 1:3) Supplying and laying of polished shahabad slab /stone, 20mm thick with machine cut edges of size 2'x'2' below (Grey colour) of approved qualty for flooring in CM 1:3 (One of Cement and three of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 20mm thick |
| 58 | TL-FL- VT-CM 1:3) Supplying and fixing of coloured Vitrified Tiles of size 600x600x8mm for flooring and other similar works in cement mortar 1:3 (one of cement and three of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 20mm thick |
| 59 | TL-FL-CDT-CM 1:3) Supply and laying superior variety Concrete Designer tiles for flooring in CM 1:3 (One of Cement and three of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 20mm thick ). |
| 60 | FL-FB-EA) Filling in foundation and basement and other similar works with Excavated earth in layers of 150mm thick well watered rammed and consolidated complying with relevant standard specification etc., all complete |
| 61 | JN-WR-TWF-WRF) Supplying and fixing of Teak Wood wrought and put up for frames of doors, windows, ventilators, cupboard and any other similar joinery works with necessary plugs, rebates for shutters, plaster grooves on all faces etc. , including labour charges for fixing hold fasts, complying with relevant standard specifications etc., in all respects.JN-WR-TWF-A 2m F)a. Teak wood over 2.00 metre and below 3 metre length |
| 62 | JN-WR-TWF-B 2m F)b. Teak wood below 2.00 metre length |
| 63 | JN-D-DC-M) Supply and fixing of best approved superior variety magnetic door catches suitable for doors including cost of door catches, Aluminium/ Stainless steel screws fixing in position, etc., complete and as directed by the departmental officers. (The quality and brand shall be got approved from the Executive Engineer before use) |
| 64 | JN-D-MS-HF) Supplying of mild steel hold fasts horizontally twisted of size 230x40x4mm with pair of suitable iron screws. |
| 65 | IN-FT-Alu TR-75cm) S & F Alu Towel rail 75 cm long |
| 66 | IN-FT-Alu HR-20mm) S & F 20 mm dia Alu. Hanger Rod |
| 67 | FF-MS-C-Dia) Supply, erection, testing and commissioning of following MS ‘C’ Class Heavy Duty Pipe as per IS 1239 to withstand a developing pressure of 10 kg. / sq.cm including necessary fittings a) Aluminium plate with five pins for coat stand |
| 68 | IN-FT-IC PH-8 G) S & F chromium plated 8 guage Picture Hook |
| 69 | LW-TP-TP-T) Supply and planting of avenue trees including earth work excavation for pit of size 60x60x60cm filled with manure for 20cm depth and filling with river sand and red earth mix in the ratio of 1:1 for 40cm depth in the same pit and planting the avenue trees of approved varities to a height of 200cm from the ground level |
| 70 | LW-TP-TG-Tri S) Supplying and fixing of triangular shape chicken mesh tree guard using 8cm dia casurina vertical post and middle tie using country wood reeper of size 50x25mm and 25 gauge chicken mesh including labour charges for fixing the triangular tree guard and as directed by the departmental officers |
| 71 | WS-EX-ASTM-PVC) Supplying, laying, fixing and jointing the following PVC pipes as per ASTM D - 1785 of suitable schedule (40/60/80) of wall thickness not less than the specified in IS 4985 suitable for plumbing by threading of wall thickness including the cost of suitable PVC/UPVC/GI specials /GM specialsWS-EX-ASTM-32 PVC)a) 32mm dia |
| 72 | WS-EX-ASTM-25 PVC)b) 25 mm dia |
| 73 | WS-EX-ASTM-50 PVC)c) 50 mm dia |
| 74 | Supplying and laying of 20mm dia PVC water supply ASTM pipe (fully consealed in walls) |
| 75 | WS-IN-HW-20 GI) Supplying, laying and fixing of the following Pipe of best approved quality for Hot water line fully concealed in walls including cost of pipes and specials, labour charges for laying, jointing, testing and redoing the dismantled portions with neat finish etc., all complete and as directed by the departmental officers. a. 20mm dia G.I. pipe |
| 76 | EL-IN-CEP-PS) Supplying and fixing 15amps 3 pin plug type socket on a suitable PVC box 16g thick concealed and covered with 3 mm thick laminated hylem sheet inclusive of all connections and cost of all materials. |
| 77 | EL-IN-EF-FH) Supply and fixing of best approved superior variety concealed type Fibre box with M.S. Fan Hook of 100mm dia, 75mm depth and 3mm thick including cost and fixing in position etc., complete and as directed by the depatmental officers. (The quality should be got approved by the Executive Engineer before use). |
| 78 | EL-IN-EF-AC) Charges for assembling and fixing of ceiling fan of different sweep with necessary connections and fixing of fan regulator on the existing board etc., all complete (Excluding cost of fan) |
| 79 | FF-Wi-Cu c-2C 1.5) Supply and laying of 2 core 1.5 sq.mm. armoured copper cable for control wiring to the Terrace Pump Motor with runs of 14 SWG TC wire for earthing, providing in wall with suitable size GI clamps, screws, wooden plug, end termination by using suitable size cable glands, copper sockets and etc., as directed by the Departmental Officers. |
| 80 | EL-IN-EF-ES) Providing Earthing Station using Pipe electrode as per IS 3043 using 2.1 m of 38 mm dia and 0.15 m of 19 mm dia B Class. GI pipe including earthwork excavation, brickwork in cement mortar, plastering, 38 mm trench RCC cover for the brick masonry, 19 mm GI Check nuts, bolts, washers, GI bend, reducer, coupling, funnel with wire mesh of 12.5 mm dia, copper plate 125 mm x 50 mm x 6 mm ( 0.36 kg ), including 1 bag ( 40 kgs ) charcoal, salt 10 kg including cost of all materials and labour,etc all complete as per relevant standard specification and as directed by the departmental officers. |
| 81 | EL-IN-EF-MB) Supplying and fixing best country wood meter cupboard with shutters double leaves with 230mmx25mm size CW planks for alround sides 62.5 mm x31.25mm styles and rails for shutters and 75mm x 25mm weld mesh of 6 and 10 gauge for panels including labour charges for fixing in position |
| 82 | JN-TWPD-DL-75mm S-Alu 2.1H) Supplying and fixing of best Indian Teak wood paneled door of Double leaves shutters in position using 75mmx37.5mm styles and 3 Nos. of 150x37.5mm rails (Top, Bottom and Lock rail) and 18.75mm thick planks for panels including cost and labour for fixing the fittings such as 2 nos of 8\\" door handle with brass screws, 6 nos of 6\\" Butt hinges, 1 no 8\\"x1/2\\" Tower bolt, 4 Nos. of 16\\" x 1/2' Tower bolt, 2nos Nylon bush and 2 nos door stopper of best approved quality shade etc., all complete and as directed by the departmental officers.JN-TWPD-DL-75mm S-Alu 2.1H - 1.2*2.1)b.1200mm x 2100mm |
| 83 | IN-CBD-TW-Pre.L) Providing T.W.double leaf shutters for cupboard/ward robes with prelaminated particle board or prelaminated cement bonded particle board for shutters. (The lock and key, one side laminated particle boards quality and shade and other fittings should be got approved by Executive Engineer before use.) |
| 84 | RE-RTS-Fe-NC) Supplying, fabricating and placing in position of Mild steel Grills / Ribbed Tor Steels (without cement slurry) of all diameters for reinforcement for all floors including cost of binding wire, bending tying etc., all complete and as directed by the departmental officers. |
| 85 | CN-RWH-P/AG-M25) Providing Rain water harvesting pit by augering 300mm dia bore pits to a depth of 5.50m overall depth and filling with stone jelly of 40mm size including earth work excavation 1m dia, 600mm depth and filling with filling sand to a depth of 300mm filling sand over the stone jelly and covered with Precasted slab Standardised Cement concrete M25 grade of 40mm thick excluding the cost and fabrication of reinforcement grills but including precasting, moulding, curing, finishing and fixing in position etc and all complete as directed by the departmental officer. CN-RWH-P-M25)a). Providing pit |
| 86 | CN-RWH-AG-M25b) Augering 30cm dia |
| 87 | WS-EX-RWD-PVC) Supplying and fixing of following dia PVC SWR pipe with ISI mark conforming to IS 13952:1992- type `A` for Rain water down fall pipe with relevant specials WS-EX-RWD-PVC 110)b. 110mm dia PVC SWR pipe |
| 88 | MW-SNB-MS-N&LO B) Supplying, fabrication and erection in position of M.S. scheme name and layout board |
| 89 | SA-IN-WB-P) Supplying and fixing of following porcelin wash hand basin , superior variety of size 550x400mm with all accessories (wash hand basin shall be got approved by the Executive Engineer before fixing).SA-IN-WB-WWOP)b) White without pedastal wash hand basin |
| 90 | WS-IN-HCP-LBT) Supplying and fixing of 15mm dia half turn C.P Tap (Long body Tap) of Best quality including cost of tap with required specials and labour for fixing etc, all complete and as directed by the departmental officers., (The quality and brand of fittings should be got approved from Executive Engineer before use). |
| 91 | WS-IN-HCP-SBT) Supplying and fixing of 15mm dia half turn C.P Tap (Short body Tap) of Best quality including cost of tap with required specials and labour for fixing etc, all complete and as directed by the departmental officers., (The quality and brand of fittings should be got approved from Executive Engineer before use). |
| 92 | SA-IN-IWC-GF) Supplying and fixing of Indian Water Closet white glazed (oriya type) of size 580 mm x 440 mm of approved make with ISI mark.In Ground floor. |
| 93 | SA-IN-IWC-OGF) Supplying and fixing of Indian Water Closet white glazed (oriya type) of size 580 mm x 440 mm of approved make with ISI mark (Other than ground floor) |
| 94 | SA-IN-EWC-W) Supplying and fixing EWC superior variety (white) 500mm with PVC SWR grade `P` or `S` trap including cost and fixing |
| 95 | SA-Ex-SWR P-Dia) Supplying and fixing the following dia PVC (SWR) pipe with ISI mark confirming to IS 13952:1992- type `B` for soil line with relevant specials confirming to IS 14735 SA-Ex-SWR P-110a. 110 mm dia. |
| 96 | SA-Ex-SWR P-75b. 75 mm dia. |
| 97 | SA-Ex-SWR P-50) Supplying, laying and concealing the 50mm dia PVC (SWR) pipe with ISI mark conforming to IS 13952:1992- type `B` for waste water line with relevant specials conforming to IS 14735 |
| 98 | SA-IN-GT-KB) Supplying and fixing 150mm x 100mm size stone ware Gully trap |
| 99 | SA-IN-NT-PVC) Supplying and fixing of PVC Nahani Trap not less than 75mm 4 way / 2 way (Superior variety) (The PVC Nahani Trap should be got approved from the Executive Engineer before use) |
| 100 | SA-Ex-SN8-Dia) Supplying, laying and jointing the following dia UPVC Non Pressure pipe of SN8 SDR 34 (S 16.5) as per IS 15328/2003, superior variety SA-Ex-SN8-110)a. 110 mm UPVC Non Pressure pipe |
| 101 | SA-Ex-SN8-160)b. 160 mm UPVC Non Pressure pipe |
| 102 | SA-Ex-SN8-200)c. 200 mm UPVC Non Pressure pipe |
| 103 | WS-Ex-PVC EC-160) Supplying and fixing of 160mm dia PVC end cap for borewell casing pipe of approved brand etc., all complete and as directed by the departmental officers (the quality and brand of pvc end cap should be got approved by the executive engineer before use) |
| 104 | SA-Ex-PVC T-Dia) Supplying and fixing of following dia PVC Equal tee as per IS 10124/1982 Part II with superior variety (The brand and quality of should be got approved from EE before use ).SA-Ex-PVC T-110) a. 110 mm dia PVC Equal tee |
| 105 | EL-IN-EP-LP) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cablewith ISI mark conforming to IS: 694/1990, 1.1 K.v. grade cable with continuous earth by means of 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark EL-IN-EP-WCRa. Light point with ceiling rose |
| 106 | EL-IN-EP-WOCR)b. Light point without ceiling rose |
| 107 | EL-IN-EP-CB)c. Calling bell point with Buzzer / Calling bell |
| 108 | EL-IN-EP-FP) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark for FAN POINT controlled by 5 amps flush type switch including circuit mains cost of all materials specials etc., all complete. |
| 109 | EL-IN-EP-SLP) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark for Stair case light point controlled by 5 amps flush type switch including circuit mains cost of all materials, specials etc., all complete. |
| 110 | EL-IN-EP-SBI) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark for 5 amps. 5 pin plug socket point at Switch Board Itself including circuit mains, cost of all materials, specials, etc., all complete |
| 111 | EL-IN-EP-CP) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark for 5 amps. 5 pin plug socket point at convenient places including circuit mains, cost of all materials, specials, etc., all complete |
| 112 | EL-IN-EF-TPN) Supply and fixing of follwing Triple pole main switch with fuse and neutral link on a suitable well varnished teak wood board including necessary interconnection, cost of all materials etc., all complete as directed by the departmental officers. (The quality should be got approved by the Executive Engineer before use).EL-IN-EF-TPN-63a)b) 63 amps triple pole main switch with fuse and neutral link |
| 113 | EL-IN-EF-F) Supply and delivery of following Electric Ceiling fan with ISI mark EL-IN-EF-48\\"F)a) 48\\" Electric fan 1200mm sweep |
| 114 | EL-IN-WR-1x1.5m²) Run of main with 1 wire of 1.5 Sqmm PVC insulated single core multi strand fire retardant flexible copper cablewith ISI mark conforming to IS: 694/1990, 1.1 KV grade cable with continuous earth by means of 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark |
| 115 | EL-IN-WR-2x2.5m²) Run of main with 2 wires of 2.5 sq.mm. PVC insulated single core multi strand fire retardant flexible copper cablewith ISI mark conforming to IS: 694/1990,1.1 kv grade cable with continuous earth by means of 1.5 sq.mm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark |
| 116 | EL-IN-WR-2x4m²) Run of main with 2 wires of 4 sq.mm. PVC insulated single core multi strand fire retardant flexible copper cablewith ISI mark conforming to IS: 694/1990,1.1 kv grade cable with continuous earth by means of 2.5 sq.mm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark |
| 117 | EL-IN-WR-4x6m²) Run of main with 4 wires of 6 sq.mm. PVC insulated single core multi strand fire retardant flexible copper cablewith ISI mark conforming to IS: 694/1990,1.1 kv grade cable with continuous earth by means of 2.5 sq.mm/4 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark |
| 118 | EL-IN-EP-ELCB-TP) Supply and fixing of electro mechanically operated three phase earth leakage circuit breaker/residual current circuit breaker (ELCB/RCCB) |
| 119 | JN-TWPD-DL-75mm S-BF-2.1H) Supplying and fixing of best Indian Teak wood paneled door of Double leaves shutters in position using 75mmx37.5mm styles and 3 Nos. of 150x37.5mm rails (Top, Bottom and Lock rail) and 18.75mm thick planks for panels including cost and labour for fixing the Brass furniture fittings such as 4 nos of 6' door handle , 6 nos of 5' Butt hinges, 4nos 6'x1/2' Tower bolt, 1no 10'x5/8' aldrop, 2nos Nylon bush and 2 nos door stopper of best approved quality shade etc., all complete and as directed by the departmental officers.JN-TWPD-DL-75mm S-BF-1.8x2.1d. 1800X2100mm.with Brass fittings ( Double leaf) |
| 120 | EL-IN-EF-EF) Supplying and fixing of following dia sweep AC exhaust fan of approved ISI Quality EL-IN-EF-EF225)a) 225 mm dia sweep AC exhaust fan |
| 121 | S & F of Exsaust Fan 450mm dia |
| 122 | IN-FT-BM-PVC) Supplying and fixing of BEVELED EDGE MIRROR of approved quality and brand of following size IN-FT-BM-500x400)a) 500x400x5.5mm shelf type mounted |
| 123 | PA-IN-MP-2C EP) The new wood work with two coats of best melamine polish/varnish of approved quality and brand including preparation of surface etc.. The rate is inclusive the cost of all material, labour charges and finishing neatly etc., complete complying with standard specification and as directed by the departmental officer. |
| 124 | PL-FL-WPC-Poly) Providing polymer coating (water proof coating for sunken portion of toilet |
| 125 | PA-IN-WP-2CP BWP) Supplying and applying of Full putty one coat with aproved make wall putty for smooth finishing the new cement plastered walls |
| 126 | SA-IN-CP-2WBC) Supply and Fixing of CP two way bib cock with health faucet |
| 127 | EL-IN-EF-BH) Supplying and fixing of water tight Bulk head fitting suitable for LED with guard, including ncessary connections, cost of materials etc., all complete EL-IN-EF-9W)a) 9 watts LED bulb |
| 128 | EL-IN-EF-12W)b) 12 watts LED bulb |
| 129 | EL-IN-LED.F-TL) Supply and fixing of 4' long 18 W Crystal Glass LED tube Light with ISI mark including cost of all materials |
| 130 | EL-IN-EF-BH) Supplying and fixing of water tight Bulk head fitting suitable for LED with guard, including ncessary connections, cost of materials etc., all complete |
| 131 | EL-EX-EF-SL) Supply and fixing of LED Street lighting luminaries suitable for fixing LED Street Light Fitting EL-EX-EF-SL-30W)30W LED Street Light Fitting with LED |
| 132 | EL-IN-EF-FU) Supplying and fixing following porcelain fuse unit on suitable teakwood plank varnished to be fixed on the top of pole/EB street pole with necessary clamps including cost of all materials etc., all complete. EL-IN-EF-3-100aFU3 Nos.of 100 Amps - Fuse Unit |
| 133 | Supply and fixing of 63 A Three Phase 500 V 4 Pole change over Switch on suitable angle iron frame work with MS Cable entry boxes with Earth work Connection only etc |
| 134 | EL-EX-LTUG-S&D) Supplying and delivery of following PVC aluminium armoured LTUG cable (PVC aluminium armoured LTUG 1100V grade) with ISI mark EL-EX-LTUG-S&D-3.5C50) h) 3.5 Core 50 Sqmm PVC Armoured Cable |
| 135 | Supply and fixing of Rotary Handle including interconnection wire including cost of all materials and labor charges |
| 136 | Supply and fixing of 900X700X250MM TK EB Service panel for 415 volt. 3 Phase 4 wire 50hz power distribution system the panel shell be indoor wall mounting type out of 16 SWG Sheet steel completed with all accessories in coming 1 no 300amps bus bar compartment and separate energy meter compornent outgoing 3no of 300 amps fuse with base including all necessary connection etc. all completd and as directed by the department officers. |
| 137 | TL-FL-GS-CM 1:3-(GF) Supplying and laying of Granite slabs (Jet Black) (superfine polished with machine cut edges) of size 4'-0'x 2'-0' of 18 to 20 mm thick for flooring (Best approved quality and the same shall be got approved from the Executive Engineer before using) over cement plastering in CM 1:3 (One of cement and three of crushed stone sand) 20mm thick including Cost of Mortar Plasticizer (Liquid) at 200ml per bag. a) Jet blackIn Ground Floor |
| 138 | TL-FL-GS-D-Nos) Providing double nosing to the edges of granite slab of 20mm thick including labour, power consumption, tools & plants required, true to horizontal etc., for kitchen platform in all floors and as directed by the departmental officers. |
| 139 | EL-EX-LC-BG) Labour charges for laying of PVC aluminium armoured LTUG /flat cable in a trench to a depth of 0.75m including earth work excavation, providing sand cushion, brick layer protection and refilling etc., all complete and as Directed by the departmental officers Below Ground level |
| 140 | EL-EX-LC-AG) Labour charges for laying of PVC aluminium armoured LTUG cable / flat cable on post and wall to make good etc., all complete complying with relevant standard specifications and as directed by the departmental officers Above Ground level |
| 141 | WS-IN/EX-P-Dia) Supplying and laying of following GI pipe B class with ISI mark for including cost of clamping and labour charges, fixing G I pipes, GI specials etc all complete.(Above Ground Level)WS-IN/EX-GI-65)a) 65mm dia GI pipe |
| 142 | Supplying and fixing of following dia GI specials WS-IN/EX-GI B-65)a) 65 mm dia GI bend |
| 143 | WS-IN/EX-GI Cu-65)g) 65 mm dia GI Coupling |
| 144 | EL-EX-ET-S&D-3.5C50) Supply & fixing of Crimping lugs suitable for following PVC armoured LTUG cableh). 3.5 core 50 sq.mm. |
| 145 | EL-EX-Br CG-S&D) Supplying and delivery of following brass cable gland suitable for following core sqmm PVC armoured LTUG cable with earth strip around the gland and cable termination with crimping of terminal with lugs etc., all complete EL-EX-Br CG-S&D-3.5C50)h). 3.5 core 50 sq.mm. |
| 146 | EL-7S-4w MCB-WO ELCB-OW) 7 SEGMENTS (3 TIER) 3 PHASE DISTRIBUTION BOARD WITH MCB 4 way / 6 way / 8 way / 12 way TPMCB sheet steel distribution boards flush type / surface type fitted with bus bars and neutral links with single / three phase MCB outgoings and separate 4 way provision for accommodating One No. 4 pile incoming MCB / Isolator and another separate 4 way provision for accommodating One No. 4 pole ELCB / RCD (totally 8 ways in one segment) (3 x 4 ways in each segment) and separate provisions for MCB / Isolator (totally 12 Nos.) for sub incomers in 3 segments with label holder and provisions for taking up cable for size not less than 35 sq.mm.TPMCB DB with Metal / Acrylic Door Cover with IP42 Pro- tection - HIGHER END4 ways 3 phase DB No. of ways incomer MCB / Isolator - 4 No. of ways incomer ELCB / RCD - 4 No. of sub-incomers - 12 No. of outgoings ways - 12 |
| 147 | Supplying and fixing of Gong Bell 12 size suitable for 250V with ISI mark etc., all complete and as directed by the departmental officers. |
| 148 | SA-IN-CS-S) Supply, delivery and fixing of cuddappah slab sink of size 600mm x 600mm x 200mm thick 32mm dia ‘B’ class G.I. waste water pipe and 32 mm dia C.P. waste coupling (sample should be got approved by the Executive Engineer before use) |
| 149 | TL-FL-GS-CM 1:3-(GF)) Supplying and laying of following colour Granite slabs (superfine polished with machine cut edges) of size 4'-0'x 2'-0' of 18 to 20 mm thick for flooring (Best approved quality and the same shall be got approved from the Executive Engineer before using) over cement plastering in CM 1:3 (One of cement and three of crushed stone sand) 20mm thick including Cost of Mortar Plasticizer (Liquid) at 200ml per bag TL-FL-RGS-CM 1:3)b. Ruby Red, Raw Silk |
| 150 | SA-IN-SS-S) Supply, delivery and fixing of Stainless steel sink following size using 32mm dia ‘B’ class G.I. waste water pipe and 32 mm dia C.P. waste coupling (sample should be got approved from the Executive Engineer before use) true to spirit level including finishing neatly, and fixing in position complying with relevant standard specifications etc., complete in all floors. |
| 151 | CN-FPS-1:3:6-50mm) Supplying and fixing of fibre mixed precast slab of 50mm thick of all required shapes made in cement concrete 1:3:6 (one of cement,three of crushed stone sand and six of 20mm hard broken stone jelly including Mortar Plasticizer (Liquid) at 200ml per bag) |
| 152 | CN-FL-Ellis-Chip) Finishing the top of flooring with cement concrete 1:3 (One of cement and three of blue granite chips of size 10mm and below) 20 mm thick Ellispattern Flooring (No Sand) and surface rendered smooth including 150mm wide skirting, providing proper slopes, thread lining, curing etc.. complete |
| 153 | WS-EX-CI-Man-60 x 60) Supplying and fixing of C.I man hole cover with locking arrangements of approved quality and brand of size 0.6m x 0.6m (50Kg) as per standard specifications including cost of material, labour charges for fixing etc., all complete and as directed by the departmental officers. |
| 154 | EW-AS-OC-ER) Earth work excavation for Open Foundation in all soils and sub-soils to the required depth as may be directed except in hard rock requiring blasting, inclusive of shoring, strutting and bailing out water wherever necessary. (Excluding refilling the sides of foundation) (Excluding Refilling).EW-AS-OC-ER-2m(a) 0 to 2m depth |
| 155 | WS-IN-S-CI) Supplying and fixing of C.I. steps of approved quality and brand (not less than 5kg each) including cost of material labour charges for fixing etc., all complete and as directed by the departmental officers. |
| 156 | WS-Ex-OWSM-TP) Supply and delivery of Open well Submersible pump set without panel board conforming to IS 14220 /2002 and as amended thereafter and BEE 3 Star Rated capable of discharging the following duties due to all causes. The pump shall be with stainless steel shaft and dynamically balanced bronze mixed type impeller, CI FG 200 grade casing and brass screws and rotor shall be of copper rod as per IS 613/1984 with ISI mark. 150 lpm x 50 m |
| 157 | Newly Constructed Roof/Podium with 1K PU Waterproof coating upto 2000 Sq.m - Providing and Applying single component Polyurethane based cold applied seamless waterproofing coating to the RCC surface like Roof & Podium area applied |
| 158 | WS-Ex-LC-S BW/OW) Labour charges for the erection of submersible pumpset in borewell/openwell including fixing and jointing submersible cable with proper clamps Up to 5HP |
| 159 | RW-PB-D-RMH) Supplying and fixing of Rubber Moulded Hydraulic Pressed Paver Bloc of approved quality and make of building front and back side including cost of materials and conveyance of paver blocks and labour charges for laying to proper level, slope etc., all complete and as directed by the departmental officers. ( Design and colour should be got approved from the Executive Engineer before use.RW-PB-D-RMH-63)b) 63mm thick |
| 160 | RW-KS-CC 1:3:6-PC) Supplying and fixing of pre-cast kerb stone of size 450x300x150mm made in CC 1:3:6 (One of cement, three of crushed stone sand and six of hard broken stone jelly) using 20mm size hard broken stone jelly including Cost of Mortar Plasticizer (Liquid) at 200ml per bag, the cost of Kerb stone moulding, laying, curing, transporting, pointing and as directed by the departmental officers. |
| 161 | FL-FB-BJ-40mm) Supplying and filling with 40mm size broken brick jelly in foundation and basement and other similar works including cost of materials, labour charges, etc., all complete and as directed by the departmental officers. |
| 162 | FL-FB-BJ-20mm) Supplying and filling with 20 mm size broken brick jelly in foundation and basement and other similar works including cost of materials, Labour charges etc., all complete and as directed by the departmental officer. |
| 163 | CN-FB-PCC-1:2:4) Plain cement concrete 1:2:4 (One of cement two of crushed stone sand and four of Hard Broken Stone jelly) (including Mortar Plasticizer (Liquid) at 200ml per bag) using 20mm gauge hard broken stone jelly |
| 164 | SA-IN-VSC-PVC) Supplying and fixing the following dia PVC(SWR) pipe with ISI mark confirming to IS 13952:1992- type `A` with PVC cowl and relevant specials confirming to IS 14735a) 110mm dia PVC SWR pipe of 3metre with required PVC cowl & PVC specials etc., all complete. |
| 165 | PL-ST-HBSC-12mm) Stucco Plastering 12mm thick using hard broken stone chips of size 10mm and below using 86.50 kgs of cement and 0.15 m³ blue metal chips for every 10m² area over the existing plastered surface including curing etc., complete |
| 166 | FA-EJ-FP-Bit) Supplying and fixing of 20mm thick bituminous expansion joint filler pad of approved quality and make inclusive of conveyance charges, cutting the pad to the required size, cost of materials and labour charges for fixing in position wherever necessary for all floors etc., complete and as directed by the departmental officers. |
| 167 | WS-Ex-DOL-TPPB) THREE PHASE PANEL BOARD- D.O.L WITH TWO LEVEL GUARD AND AUTO START WS-EX-DOL-TPPB-5HPPanel board for 5 HP submersible pumpset |
| 168 | WS-Ex-FCC-3c) Supply and laying of PVC insulated and sheathed following core and sq.mm flat type copper cable confirming to IS 694/1990,cable for submersible motor etc., all complete and as directed by the departmental officers. (The materials should be got approved from the Executive Engineer before use)WS-Ex-FCC-3x4)c) 3 core 4 sq.mm flat type copper cable |
| 169 | Supplying of 25 mm dia PVC pipes 10 Kg/cm2 including all specials etc., completed for casing pipes for 4.0 sq mm submersible flat cable and as directed by the departmental officers. |
| 170 | Labour charges for laying and jointing the PVC pipes as per 10 kg/ cm2, 150 mm thickness and etc., complete and as directed by the departmental officers |
| 171 | WS-Ex-Ny R-BW) Supply and delivery of required 12MM dia nylon rope of superior quality for submersible pumpset in borewell and as directed by the departmental officers Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysJul 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 days