Tender For Repair And Maintenance To Roof, Ceiling, Eaves Board Etc And Other Connected B/R Works At 663 Army Avn Sharifabad Mil Stn Under Age(I) Cif(K)
Tender Value
10 Lakhs
Estimated cost
Bid Submission
21 Jul 2026
14 days left
EMD
20000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Srinagar → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Maintenance To Roof, Ceiling, Eaves Board Etc And Other Connected B/R Works At 663 Army Avn Sharifabad Mil Stn Under Age(I) Cif(K)
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings. |
| 2 | S&F Galvanised, corrugated mild steel sheeting, 0.63mm thick with two corrugations side lap, fixed with coach screws/self tapping screws and washers, in roofs, walls etc. with grade of zinc coating 275 upto 8mtr height, complete all as specified and directed by the Engineer-in-Charge. |
| 3 | S&F Galvanised, plain mild steel sheeting, 0.80mm thick as in ridges, hips, valley gutters, drip and straight flashing(length and girth as fixed), fixed with coach screws/self tapping screws and washers with grade of zinc coating 275, complete all as specified and directed by the Engineer-in-Charge. |
| 4 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete as specified all as specified and directed. |
| 5 | S & F Pre-painted galvalume aluminium zinc coating GI base plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof, fixed with self tapping screws complete all as specified and directed. |
| 6 | Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and as directed by the Engineer-in-Charge. |
| 7 | S&F Steel work as in tubular section for post, purlins etc including special shaped washer, angle cleat, holdfast, gusset plate etc., complete using ERW or induction butt welded tubes conforming to I.S.1161- 1979 grade St.-240 cut or notched forming holes, without any attachment including drilling, fitting, riveting and or welding or connecting with bolts and nuts (including rivet or nut and bolts) providing and fitting angle cleats Gusset plates etc also for welding plumbing, truing up and fixing complete as directed by Engr-in-Charge. |
| 8 | S&F 1.25mm mild steel, plain, black sheet in ridges, hips, valley gutters, drip and straight flashings with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required |
| 9 | M&L for applying two coats of synthetic enamel paint on new steel surfaces of any description, over 10 cm in width or girth over a coat of red oxide primer complete all as specified and directed by Engr -in-Charge. |
| 10 | Dismantling boarding/ false ceiling of any description, fixed in any position with nails, complete all as specified and directed by the Engineer-in-Charge. |
| 11 | S&F GI frame work size of grid 605 x 605 mm for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from sofit at approx 900 mm centre to centre with GI cleat and steel expansion fasterner with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips acress the intermediate channel at 457mm centre to cnetre including hangers 6mm dia.GI (upto 1200mm length) adjusting level fixed tp roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm ling and expansion hold fasterner 12.5mm dia 40mm long including S&F 8mm thick non asbestos fibre cement building boards fixed or laid/inserted to timber/GI/ Aluminium frame work, complete all as specified and directed by Engineer-in-Charge. |
| 12 | S&F 2nd class soft wood boarding, 15mm thick, as in wall panelling, plain one side and edges tongued and grooved or rebated, fixed with nails in any situation including french polishing on surface of any description width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coat upto satification of Engr-In-Charge. |
| 13 | Note :- An amount of Rs. Rs 58,660.00 on account of credit schdule for Sch 'A' Part-II Shall be deducted from the total amount of BOQ to arrive at the contract sum. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysJul 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender