Tender For Repair And Maintenance Of Lt External Elect Works, Lt Panels At Hq 10 Sector Rr, 29 repair renovation At Pattan Grn Under Age (I) Cif (K)
Tender Value
10 Lakhs
Estimated cost
Bid Submission
21 Jul 2026
19 days left
EMD
20000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Srinagar → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Maintenance Of Lt External Elect Works, Lt Panels At Hq 10 Sector Rr, 29 repair renovation At Pattan Grn Under Age (I) Cif (K)
BOQ
| Sl. No. | Item Description |
| 1 | Excavating in trenches in hard/dense soil, n. exc. 1.5 m wide and n. exc. 1.5 m in depth, for foundation, etc. or for shafts, wells, cess pits, manholes, pier holes, etc n. exc. 10 sqm on plan and n. exc 1.5 m in depth and getting out complete all as specified and directed. |
| 2 | Returning, filling in (soil), including spreading, leveling, watering and well ramming in layers not exc. 25 cm complete all as specified and directed. |
| 3 | Removing excavated material (soil) n.exc. 50 m and depositing where directed at a level n.exc. 1.5 m above the starting point complete all as specified and directed. |
| 4 | M&L for brick protection with sub class 'B' old size brick well burnt laid flat for cable protection abutting each other laid dry with width equal to length of brick complete all as specified and directed. |
| 5 | M&L for dry clean fine river sand as in sand cushioning to U/G cable including punning down of sand layer complete all as specified and directed. Note :- Punned thickness shall only be measured and paid. |
| 6 | Supply and laying in trenches or fixed to wall/pole or passing through ducts or pipe, cable LT 1100 volts grade heavy duty, XLPE insulated , armoured heavy duty electric cable , with aluminium conductor of size 25 Sqmm x 3.5 core including taking out existing cable from trenches or fixed to wall/pole or passing through ducts or pipe of any size, any core , complete all as specified and directed. |
| 7 | Description all as per srl item No. 06 above but 35 Sqmm 3.5 core size complete all as specified and directed. |
| 8 | Description all as per srl item No. 06 above but 50 Sqmm 3.5 core size complete all as specified and directed. |
| 9 | Description all as per srl item No. 06 above but 70 Sqmm 3.5 core size complete all as specified and directed. |
| 10 | Description all as per srl item No. 06 above but 95 Sqmm 3.5 core size complete all as specified and directed. |
| 11 | M&L for replacement of 40 mm bore galvanised steel tubing, light grade, with all fittings, for protection of cable, laid in trenches/road crossing/floor or fixed to pole/wall with and including 02 Nos. MS clamp of size 25x4 mm, nuts, bolts and washers complete all as specified and directed. |
| 12 | M&L for replacement of 50 mm bore galvanised steel tubing, light grade, with all fittings, for protection of cable, laid in trenches/road crossing/floor or fixed to pole/wall with and including 02 Nos. MS clamp of size 25x4 mm, nuts, bolts and washers complete all as specified and directed. |
| 13 | S & F in replacement MCCB 4 Pole, 415 V, Adjustable Thermal Adjustable Magnetic (TM) type, 100 Amps rating, microprocesser based energy with rupturing capacity 36 KA, complete all as specified and directed by EIC. |
| 14 | Description all as per srl item No. 13 above, but 160 Amps complete all as specified and directed. |
| 15 | Description all as per srl item No. 13 above, but 200 Amps complete all as specified and directed. |
| 16 | Description all as per srl item No. 13 above, but 250 Amps complete all as specified and directed. |
| 17 | Description all as per srl item No. 13 above, but 315 Amps complete all as specified and directed. |
| 18 | Description all as per srl item No. 13 above, but 400 Amps complete all as specified and directed. |
| 19 | Supply, installation, commissioning and testing of totally enclosed outdoor type LT Panel in replacement weldless cubical Kiosk in modular bolted construction type dust and vermin proof floor mounted type (IP-65 degree of protection ) made out of 3 mm thick CRCA sheet of recommended size. All sheet metal parts separately chemically treated with 7 tank treatment process. The panel having both side opening door with locking arrangement,all doors fixed with aluminium hinges with suitable size nut bolts and shall have flexible fixing of each switchgear and controlgear compartment with cable alley tray of size not less than 30 cm, duly painted with two coats of synthetic enamel paint powder coated, bus bar 600 amps rating made of aluminium strip duly drilled holes for connections and mounted on epoxy based post insulators for 3 phase 4 wire 415 volts 50 HZ AC supply ,hibling , cable entry boxes , cable gland and LT panel shall be mounted on iron angle frame made out of 50 X 50X 6 mm frame with 4 no. legs size not less than 45 cms fixed with nut bolts of suitable size (bottom portion of the panel) , grouted by using foundation 1:2:4 type C1 with 20 mm graded stone aggregates totally tested as per IEC 61439-I & II , suitable for and including taking down existing LT panel complete and including the following :- |
| 20 | (i) MCCB 4 pole, 415 volts, Adjustable Thermal Magnetic (TM) type, 400 amp rating, microprocesser based energy with rupturing capacity 50 KA - 01 No. as incomer(ii) MCCB 4 pole, 415 volts, Adjustable Thermal Magnetic (TM) type, 250 amp rating, microprocesser based energy with rupturing capacity 36 KA - 02 No. for outgoing(iii) MCCB 4 pole, 415 volts, Adjustable Thermal Magnetic (TM) type, 200 amp rating, microprocesser based energy with rupturing capacity 36 KA - 01 No. for outgoing(iv) MCCB 4 pole, 415 volts, Adjustable Thermal Magnetic (TM) type, 100 amp rating, microprocesser based energy with rupturing capacity 36 KA - 02 No. for outgoing(v) Indicator set RYB -01 Set of 3 pcs only(vi) Multifunction digital panel meter suitable to display amps, volts, frequency etc - 01 No including CTs of appropriate ratio.(vii) All accessories prewired with suitable size copper conductor cable or strip including foundation as per manufacturer instruction all as required and directed. |
| 21 | M & L for Scraping of old paint from the steel tubular pole 9 mtr height with out removing accessories and preparation of surfaces for repainting, repainting the pole with one coat of 30 cm alternative yellow and white strips of each upto 1.5 mtr height using synthetic enamel paint, repainting the remaining pole and iron parts i.e. U clamps, channels etc above 1.5 mtr height by applying two coats of aluminium paint, including writing letters or figures (Block, Roman) S/L Pole No. and Location code not exceeding 30 cm high, stop, commas, short lines, dashes, hypens, brackets etc. complete all as specified and directed. |
| 22 | M&L for earthing with steel earth plate electrode of size 60cmx60cmx6mm thick buried directly in ground to a depth not less than 2.25 mtr deep below normal ground level with top edge of the earth plate not less than 1.5 mtr deep below normal ground level connected to galvanized iron strip of size 32x6mm as earthing lead by means of nuts, bolts and washers of steel after welding of GI strip to earth electrode to the full lenght of earth plate,40mm dia GI tubing light grade protection pipe upto test point, 20mm dia GI medium grade watering pipe with funnel and wire mesh, PCC pit 1:3:6 with pit cover of size 30X30cm made of RCC 1:3:6 with suitable handle,angle iron frame made of angle iron of size 40x40x4mm, adequate qty of charcoal dust and salt layers all around the earth plate and filling of vegetable soil to the remaining 10%,removal of surplus soil and returning filling in all as required at site including test point made out of steel plate of size 75x75x6mm fixed to wall all as specified in electrical plate No 3 of SSR Part-I and directed by Engr-In-Charge. Note:- (i) Item includes the cost of 7.5 metre GI pipe for protection of earth lead. (ii) Item includes the cost of 7.5 metre GI earth lead. |
| 23 | S&F in replacement of old unserviceable service cable size 10 sqmm twin core multistranded fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire of 4mm dia or tape and overall PVC sheathed complete all as specified and directed. |
| 24 | S&F in replacement of old unserviceable service cable size 16 sqmm twin core multistranded fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire of 4mm dia or tape and overall PVC sheathed complete all as specified and directed. |
| 25 | Disconnecting the voltage stabilizer of capacity 200/300 KVA oil cooled 3 phase from existing electric circuit to faciliate the repair work, transportation of the stablizer to authorised workshop and back to MES installation after repair connecting the same to electric circuit and testing on load to the satisfaction of engineer-in-charge.Note:- Parts/accessories required will be measured and paid separately here in after. |
| 26 | (a) Replacement of primarily transformer with super enamelled copper conductor of standard gauge including warnishing insulating paper etc and necessary circuit wiring complete all as specified and directed. |
| 27 | (b) Replacement of unserviceable reversible synchronous motor low speed instant start-stop high torque input 220 V single phase 50 Hz speed 60 R.P.M of capacity 10 kg-cm or as per existing servo motor alongwith bushes complete all as specified and directed. |
| 28 | (c) Replacement of PCB card of input and output comparator,limit switch for high and low setting,repair/replacement of control circuit transformers etc.including circuit wiring complete of all three phase all as specified and directed. |
| 29 | (d) Replacement of sensing transformer 9/18 Volts 240/12 Volts |
| 30 | (e) Replacement of carbon bush set as per the existing |
| 31 | (f) Replacement of ' H ' connector |
| 32 | (g) Replacement of Amp meter analog type |
| 33 | (h) Replacement of voltmeter analog type |
| 34 | Supply and toping up transformer oil of BDV not less than 50KV for toping up of reduced ltrs level in servo voltage stablizer due to evaporation/leakage/loses due to dehydration of different capacity. |
| 35 | Note :- An amount of Rs 56,875.00 on account of credit schedule for Sch 'A' Part-II shall be deducted from the total amount of BOQ to arrive at the contract sum. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysJul 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 days