Tender For Internal Electrification In A Type Shop 10 Nos, B Type Shop 10 Nos And C Type Shop 15 Nos. And Extension Of L.T.Distribution Line And Supply/Fixing Of Led Street Light Etc. Works Etc. Works At Nmy Chhibaramau, Kannauj.
Tender Value
17.03 Lakhs
Estimated cost
Bid Submission
20 Jul 2026
8 days left
EMD
1.71 Lakhs
Bank guarantee accepted
Document Fee
3100
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Lucknow → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Internal Electrification In A Type Shop 10 Nos, B Type Shop 10 Nos And C Type Shop 15 Nos. And Extension Of L.T.Distribution Line And Supply/Fixing Of Led Street Light Etc. Works Etc. Works At Nmy Chhibaramau, Kannauj.
BOQ
| Sl. No. | Item Description |
| 1 | Wiring for light point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed (concealed) medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable etc. as required. Group A |
| 2 | Wiring for fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed (concealed) medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable etc. as required. Group A |
| 3 | Supplying and fixing for plug 5/6amp. modular switch and 3 pin 5/6 amp socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. |
| 4 | Supplying and fixing 6 way double door, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, (concealed) complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) |
| 5 | Supplying and fixing 8 way double door, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) |
| 6 | Supply/Fixing of 6 A to 32 Amp. DPMCB (9/10 K.A.) C- Curve Cat- A |
| 7 | Supply/fixing of 5-32 Amp. MCB 9 KA. C-Curve Cat- A |
| 8 | Earthing with G.I. earth pipe 4.5 Meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. |
| 9 | S/F of one number 6 SWG G.I. Wire in 15mm dia. G.I. Pipe for earthing, laid in ground or in wall duly concealed including the cost of cement, sand labour. T and P other material required for proper completion of the work as directed at site. (5.12) |
| 10 | S/F hexagonal fan box with hexagonal side of approx 80mm in length fabricated from 16 SWG MS sheet incorporating 10mm dia. M.S. round bar duly bent for supporting fan hanger duly painted with red oxide and screwing arrangement with wiring conduit laid in the R.C.C. roof before concreting along with supply of all material, labour, T&P etc. required for proper completion of the work. |
| 11 | Supply and fixing of power plug with 15-16A/240 V modular switch and 6 pin 15-16 A/240 V modular socket on concealed M.S. box including supply of all materials labour T&C etc. required for proper complete in all respects. |
| 12 | Supplying and fixing 3 Module (100mmX75mm) size/ modules, GI box along with modular base & cover plate for modular switches in recess etc. as required. |
| 13 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. |
| 14 | Wiring for light/ power plug with 2X4 sq. mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed (concealed) medium class PVC conduit along with 1 No. 4 sq. mm FRLS/HFFR PVC insulated copper conductor single core cable for loop earthing as required. |
| 15 | Supply/Fixing of water tight oblong 10 watt LED Bulkhead luminarire having pressure die cast housing with driver set confirining to IP66 complete in all respect.CAT-AA |
| 16 | S/fixing of steel tubular pole 9.50 Meter long designated 410 SP-36 in 1:3:6 cement concrete foundation including excavation back filling etc. complete in all respects. |
| 17 | Supply and fixing of 100 mm x 110 mm shackle insulator / 100 x 80 mm pin insulator including G.I. bolts spindle nuts etc. complete in all respects. |
| 18 | S/fixing of 230 mm x 32 mm x 1.5 mm galvanized steel strips including holes for shackle insulators pins and bolts etc. complete in all respects. |
| 19 | S/E of ‘D’ clamps of 50 mm x 6 mm flat iron on steel tubular poles/steel rail poles with bolts, nuts etc. complete in all respects including painting with aluminum paint. |
| 20 | S/E of overhead line with ACSR conductor on poles/service bracket including binding etc. complete in all respects |
| 21 | Supply and erection of overhead line with G. I. wire No. 8 to 4 SWG on poles/ service bracket including binding etc. complete in all respects. |
| 22 | Supply and erection of hexagonal/cradle type guard of G.I. wire No.8 to 4 SWG including binding etc complete in all respects. . |
| 23 | Supply and erection of stay set at least 3.5 Meters away from the pole complete with galvanized 19 mm dia x 1.80 Meter long stay rod, 30cm x 30 cm x 6.3mm anchor plate, thimble stay clamps, stay insulator 19mmx600mm double screw tightener , 7/3.15mm G.I. stay wire etc. in 1:3:6: cement concrete in all respects. |
| 24 | Painting of the electric pole with 2 coats of aluminum paint over red oxide primer complete in all respects. |
| 25 | Supply and burying of 600mm x 600mm x 6.0mm GI plate vertically for ear thing with its top at least 2.6 meters below ground level complete with 20mm dia G.I. pipe and funnel for watering and one ear thing lead of one no. 8 to 10 SWG GI wire in 15mm dia G.I. pipe up to switch board (from apron to switch board the coast of G. I. pipe and GI wire will be extra) 30 cm square C.I frame with hinged cover masonry housing alternate layers of charcoal /coke and salt at least 150 mm thick all-round etc. as per directions of engineer-in-charge complete in all respects as per drawing (this will apply for ear thing of poles also) |
| 26 | S/F of one number 6 SWG G.I. Wire in 15mm dia. G.I. Pipe for earthing, laid in ground or in wall duly concealed including the cost of cement, sand labour. T and P other material required for proper completion of the work as directed at site. |
| 27 | S/I/T/C of 120watt Street light LED fixture, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 0C to 50 0C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI >70, under voltage and over voltage protection, EMI-EMC as per CISPR-15, lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED,Driver & electrical circuitary) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy >135 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted.. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C) S/F of 32 mm dia X 2.00 metres long G.I. pipe (medium class) bracket for mounting of fluorescent / HPMV / HPSV street light fitting on pole including bending the pipe to the required shape, 2 nos 40 mm X 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required complete in all respect. |
| 28 | S&F of 63 A. 415 V Heavy Duty Double Break HRC fuse type metal clad TPN complete with HRC fuse etc. on angle iron frame complete in all respect. Cat A |
| 29 | Supply and laying of aluminum conductor, PVC insulated armored served sheathed cable 1100 volts grade at a depth of 750 mm below ground level over a cushion of 75 mm thick snd all round and protected with burnt brick on sides and on top. On surface, the cable run shall be fixed on M.S. clamps etc. of suitable sizes or as directed by the E/I complete in all respect. The armoring of the cable shall be properly connected with the earth conductor by clamps etc. (a) 10 Sq mm 4 Core |
| 30 | Supply and laying of aluminum conductor, PVC insulated armored served sheathed cable 1100 volts grade at a depth of 750 mm below ground level over a cushion of 75 mm thick snd all round and protected with burnt brick on sides and on top. On surface, the cable run shall be fixed on M.S. clamps etc. of suitable sizes or as directed by the E/I complete in all respect. The armoring of the cable shall be properly connected with the earth conductor by clamps etc. (a) 50 Sq mm 3.5 Core |
| 31 | Supply and Laying of G I Pipe complete in all respect as per direction of E / I. (a) 50dia mm G.I.Pipe |
| 32 | Supply and Laying of G I Pipe complete in all respect as per direction of E / I. (a) 100dia mm G.I.Pipe Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysJul 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender