Tender For Repairs To Boundary Wall, Gate,Fencing, Drain And Allied Works Of C1, C1a, C2a & C2b & Fafa Inside At Yodha Gate Under Ge (East) Mathura
Tender Value
45 Lakhs
Estimated cost
Bid Submission
20 Jul 2026
13 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mathura → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs To Boundary Wall, Gate,Fencing, Drain And Allied Works Of C1, C1a, C2a & C2b & Fafa Inside At Yodha Gate Under Ge (East) Mathura
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brick work of any description and in any position built in CM and removing rubbish upto a distance of n exc 50 mtr all as specified |
| 2 | M&L for brick work with old size burnt clay sub class 'B' bricks built in CM 1:6 straight or curved on plan exc 6 m mean radius complete all as specified |
| 3 | M&L for brick work with old size burnt clay sub class 'B' bricks built in CM 1:6 straight or curved on plan exc 6 m mean radius but except bricks (obtained from item No 01) complete all as specified . |
| 4 | M&L for removing mortar from oldsize sub class bricks obtained from demolition built in cement mortar and cleaning bricks, stacking for measurement including all extra handling and removal and disposing off rubbish complete all as per specified nd directed. |
| 5 | M&L in repair precast cement concrete type B0 1:2:4 (using 12.5 mm graded stone aggregate) as in louvers and jallies 35mm thick including all mouldings posts etc set in CM 1:4 including dismantling of old Jafries/ Jallies and removing ffrom site complete all as specified and as directed. |
| 6 | Taking down cement plaster from brick wall etc incl racking out joints & hacking out for key and scrubbing down with water all as specified. |
| 7 | M&L for 10mm thick rendering in cement mortar (1:4) on fair faces of brick/ concrete surfaces finished the surface even and fair without using extra cement complete all as specified |
| 8 | M&L for 15mm thick rendering in cement mortar (1:4) on other than fair faces of brick/ concrete surfaces finishing the surface even and fair without using extra cement complete all as specified. |
| 9 | M&L for preparation of new plastered surface of wall and applying two coats of cement base paint over and including a coat of alkali resitant primer complete. |
| 10 | Demolition of reinforced cement concrete as in cover slabs/roof slabs/ beams/ columns of any description not otherwise specially provided for (reinforcement cut as required to faciliate demolition) complete all as specified and as directed. |
| 11 | M&L for MS TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 12 | M&L reinforced cement concrete type A-1 (1:1.5:3) using 20 mm graded stone as in slab supported on walls, beams and columns in floor, roof, beams and shelves etc for soak well/septic tank in running and manhole cover slab with plain fair faces and set in CM 1:4 condition complete all specified |
| 13 | M&L form work to soffits of suspended slabs such as roof slabs, landing and similar work n exc 200 mm thick, curved, plain in running condition complete all specified (rough finished surfaces) |
| 14 | Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded in natural ground/ PCC/ Brick work and making good disturbed area complete all as specified. |
| 15 | Dismantling fencing wire mesh of any type and any size. |
| 16 | M&L for PCC 1;3:6 type C-2 using 40 mm graded stone aggregate as in foundation & mass concrete etc complete all as specified. |
| 17 | S&F Mild steel work as in hand rails , half round or other section, balusters running bars, nosing to steps, wind ties, posts and struts in fencing incl cutting tops to shape as required, drilling holes , noching for wire , flat iron fillets for securing wiremesh etc., incl all necessary drilling, bolting or riveting etc & similar work conforming to Fe-290 Gde E-165 and all as specified. |
| 18 | S&F 5 to 10mm dia Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long |
| 19 | S&F mild steel round bars 10mm dia cut to length, bent to shape and welded as required and fixed in fencing confirming to Fe 410-Wor Fe 290 complete all as specified. |
| 20 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire |
| 21 | Supply only MS galvanisd chain link fencing / wire mesh of size 50mmx50mm complete all as specified. |
| 22 | S&F in repairs 2mm thick Fiber reinforced plain sheet of high tensile strength for fixing with MS frame with screw, washer and nut bolt as specified and directed.Note: Colour and design shall be approved by GE(E) Mathura. |
| 23 | S&F in repair galvanised 2 strand steel barbed wire 2.24mm, dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provn of galvanised mild steel wire staples or steel pins all as directed. (Each line wire to be measured) |
| 24 | S&F in repair Concertaina coil 450 mm dia with 2.50 mm dia high tensile strength wire fixing to Y-shaped angle iron posts securing with necessary clips on top of boundary wall all as specified and as directed. |
| 25 | Demolition of cement concrete (unreinforced) of any description andin any position not otherwise specifically provided for coping, roof kerbs etc including removing rubbish out of MOD Land complete all as directed |
| 26 | M&L for PCC 1:2:4 Type B1 (using 20 mm graded stone aggregate) as in coping etc. complete all as specified and as directed. |
| 27 | Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thick, including removing rubbish out of MOD Land complete all as directed |
| 28 | M&L for 100 mm thick Cement concrete type B- 1, (1:2:4) using 20mm graded stone aggregate as in hard standing, path etc laid even and smooth surface complete all as specified and directed. . |
| 29 | Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound complete. |
| 30 | M&L for 75 mm thick cement concrete type D2 1:4:8 (using 40mm graded stone aggregate) as in sub base Sub floor, foors and paving etc complete all as specified and as directed. |
| 31 | M&L for chequered cement concrete tiles with white cement and pigment 30cm x 30cm x 25mm thick rubber moulded glossey finish, set, jointed and pointed in neat cement slurry in floors laid over and including 20mm screed bedding in cement mortar 1:6 complete all as specified and as directed. |
| 32 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and as directed. |
| 33 | M&L non skid ceramic ENDURA coloured tiles 10mm thick (square/rectangular) area of each tiles exc 0.06 Sqm but n. exc. 0.11 Sqm set and jointed in neat cement slurry & pointed with coloured cement to match as in floors laid over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed. |
| 34 | Demolition stone slab/tiles/machine pressed precast concrete interlocking paver block any size laid in bedded and pointed in any type of mortar complete all as specified and as directed. |
| 35 | M&L for 80mm thick rubber moulded pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of M-35 Grade complete all as specified and as directed. |
| 36 | M&L for sand filling under floors or in foundations including consolidation complete all as specified and as directed. |
| 37 | M&L for preparation of old decorative surfaces of walls and applying one coat of oil bound distemper complete all as specified and as directed. |
| 38 | M&l for preparation of old surfaces of wall and applying one coat of white wash complete all as specified and directed. |
| 39 | M&L for preparation of old plastered surface of ceiling and applying one coats of white wash all as specified and directed by engineer in charge. |
| 40 | M&L for complete removal of existing treatment from old plastered surfaces of walls and applying two coats of oil bound distemper, white or tinted complete all as specified and as directed. |
| 41 | M&L for providing wall care putty 2mm thick on plastered surfaces of wall complete as specified and as directed. |
| 42 | M&L for complete removal of old decrative treatments from walls and preperation of old decorative surfaces of wall and applying two coats of weather proof acrylic exterior paint light shade over a coat of primer (100% Acrylic) over 1mm thick wall care putty using spray machine, spray hard to receive area to achieve excellent application using limited manpower including scaffolding, trestles, ladders, cradles and necessary safety measures upto the height of (G+2) floorcomplete all as specified and as directed. |
| 43 | M&L for preperation of old decorative surfaces of wall and applying a coat of weather proof acrylic exterior paint light shade using spray machine, spray hard to receive area to achieve excellent application using limited manpower including scaffolding, trestles, ladders, cradles and necessary safety measures upto the height of (G+2) floor complete all as specified and as directed. |
| 44 | M&L for preparation of old surface and appling one coat of French polish on old wooden surfaces of any description, width or girth complete all as specified and directed |
| 45 | M&L for preparation of old decorative surface of walls and applying one coat of cement base paint on walls complete all as specified and as directed. |
| 46 | M&L for preparation of old painted steel surface of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint all as specified & directed by Engineer-in-Charge |
| 47 | Dismantling structural steel work including doors, gates but excluding framed truss etc. |
| 48 | S&F for MS framed work as in doors or gates of angle or other sections with gasset plate rails braces etc complete drilled for fixing of steel sheeting or other covering to doors etc to be prepared for hanging or sliding with and including either hooks and pintel hinges or steel hanging door etc, (exclusive of steel sheeting or other covering running rails & guides) also fastening and fixing complete. |
| 49 | M&L for Preparing new steel surfaces of any description, n.exc 10cm in width or girth when unconnected with other painting or when painted in a different tintsurfaces and applying two coats of synthetic paint over and including one coat of red oxide primer complete all as directed |
| 50 | M&L for Preparing new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic paint over and including one coat of red oxide primer complete all as directed Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysJul 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender