Tender For Repair / Maintenance To Rigid/Flexible Pavements, Road Furniture In Boundary Wall Area, Access Roads, Thermoplastic Painting In Connected Ways/Paving And Other Misc Items In Smqs, Omq, Near Otm Area Of Domestic Area At Afs Sulur
Tender Value
1.26 Crore
Estimated cost
Bid Submission
28 Jul 2026
26 days left
EMD
2.01 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Tiruppur → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair / Maintenance To Rigid/Flexible Pavements, Road Furniture In Boundary Wall Area, Access Roads, Thermoplastic Painting In Connected Ways/Paving And Other Misc Items In Smqs, Omq, Near Otm Area Of Domestic Area At Afs Sulur
BOQ
| Sl. No. | Item Description |
| 1 | M&L for scarifying or picking gravelled, macadam or bituminous macadam surfaces in area n.exc 400 sqm, depth exc 50 mm and n.exc 100 mm, complete all as specified and as directed. |
| 2 | M&L Laying and compacting 75 mm thick (compacted thickness) Wet Mix Macadam (WMM) grading as per table 400-13 of MoRTH specifications for Road and Bridge works 2013 manufactured in WMM plant, material comprising of clean, crushed, graded aggregate and granular material premixed with water to a dense mass, spreading with sensor paver and rolling with vibratory roller of capacity 80-100KN static weight and consolidating to required gradient and camber complete all as specified and directed. The finished surface tolerances to be as per Table 900-1 of MoRTH specifications for Road and Bridge works 2013 complete all as specified and as directed |
| 3 | Repair to potholes any depth, n.exc. 1 sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc., cutting around edges to at least 25 mm in depth, making good by filling in screened and graded road metal, watering and well ramming (including supply of road metal) and rolled with tandem vibratory roller to a uniform smooth surface complete all as specified and as directed. |
| 4 | Repair to potholes any depth, n.exc. 1 sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc., cutting around edges to at least 25 mm in depth but making good by applying tack coat with bituminous primer @ 5 kg per 10 sqm, putting in premix as specified for thin bituminous carpet (2 cm thick) well rammed and sealed with premixed sand seal coat (6.8 kg of binder with 0.06 cu m of sand), again well rammed (including supply of premix binder and sand) depth of potholes n.exc. 30 mm complete all as specified and as directed. |
| 5 | M&L for preparing unsurfaced \\"Water bound macadam/ Wet mix macadam surface\\" by brushing with wire brushs for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny bags or with mechanical air compressor to remove all loose dirt etc and applying evenly a priming /tack coat with bituminous primer (paving bitumen VG-10) @ 10 kg per 10 Sqm complete all as specified and as directed. |
| 6 | M&L for Premix Bituminous Macadam laid with mechanical paver and material transported in tipped (covered) vehicle and rolled and compacted to required gradient and camber with tandem vibratory roller (consolidated thickness 75 mm or less) using binder content of paving bitumen (VG-30) by 4 % weight of total mix, complete all as specified and as directed. |
| 7 | M&L for Preparing for \\"Bituminous macadam surfaces and existing black top surface\\" by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with mechanical air compressor to remove all loose dirt etc and applying evenly a priming/tack coat with bituminous primer of VG-10 @5 kg per 10 Sqm, complete all as specified and as directed. |
| 8 | M&L for Premix Semi-dense Bituminous Concrete 40 mm (consolidated thickness) with 5.5 % binder content by weight of total mix (Paving bitumen VG-30) laid with mechanical paver and material transported in tipped (covered) vehicle and compacted to required camber and gradient with tandem vibratory roller complete all as specified and as directed.Note:- In the event of excess quantity of binder content is necessitated due to mix design of asphaltic concrete, the same shall be provided by the contractor at no extra cost and no price adjustment shall be applicable in this regard. |
| 9 | Taking down existing Cat eyes of any size, any description complete all as specified and as directed. |
| 10 | S&F Cat's eye retro reflective type of metal body alloy of size 120mm x 110mm x 24mm with PAMA striplens reflector fixed with and incl MS stud of suitable size as per manufactures instructions complete all as specified and as directed.Make:- Dark Eye, Model No. DA 972.0 or equivalent model of other manufacturers from the list. |
| 11 | S&F Solar Cat's eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. all as specified and directed. |
| 12 | Taking down existing metal delineator of any size, any description complete all as specified and as directed. |
| 13 | S&F Metal tubular delineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and as directed. |
| 14 | Demolition brick work or stone / boulder masonry built in cement mortar as in wall etc. complete all as specified and as directed |
| 15 | M&L for Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width type B-1 1:2:4 using 20mm graded stone aggregate and setting in mortar 1:4 straight or curved on plan exc. 6m mean radius, complete all as specified and as directed |
| 16 | Rendering 15mm thick as fair faces of bricks in CM 1:4 finished even and smooth without using extra cement complete all as specified and as directed. |
| 17 | M&L for preparation of newly plastered surface of wall and applying two coat of cement base paint over a coat of alkali resistant priming paint complete all as specified and as directed. |
| 18 | M&L for Hot applied thermoplastic compound 10 CM or exc 10 CM width and 2.5mm thick (excluding thickness of glass beads ) and providing selecting glass beads @ 250gm per sqm as per IRC-135, finished surface to be levelled uniform and free from streaks and holes including cleaning of surface to remove all loose dirt etc. complete all as specified and as directedNote :- The line painting shall stand out boldly and solidly without showing signs of brush marks or surface underneath. If necessary, the surface shall be re-painted until the desired result is obtained. |
| 19 | S&F in repairs pre coloured (black & yellow) and UV stabilised Speed bump made out of plastic material of size L=250mm, W=750mm, H=75mm including removing rubbish material to outside MD land complete all as specified and as directed. Note:- (i) It shall highly resistant to severe impacts and harsh weather conditions. (ii) Two highly reflective reflectors moulded in PMMA material shall be welded with ABS base plate through ultrasonic welding process and then fixed on speed bump so that dust and water cannot enter reflectors inside area. (iii) Metallic bolts shall be used for installation speed hump on road. |
| 20 | S&F in repairs Convex mirrors of dia 100 cm, thickness not less than 3 mm for road safety made up of polycarbonate reflective mirror body made of ABS suitable for outdoor use complete fixed with MS pipe of 40 mm dia, length 2.4 mtr embedded in PCC 1:2:4 type B1 of size 450 mm x 450 mm including earth work complete all as specified and as directed. |
| 21 | S&F in repairs for Stainless Steel Sign board pattern (SS to SS-7), fully retro reflective sign board made of 3mm thick ACP (Aluminum composite panel) sheet framed with 40mm round SS pipe having front/back (both) side entire surface fully bonded with retro reflective sheeting of HIP (High Intensive Prismatic) grade having pressure sensitive adhesive. boarders and message as indicated cut out. Back ground in Blue and matter in white colour tape having two posts of 50mm round SS pipe 3.0mtr long including excavating post holes of 30 x 30 x 30 cm and embedded in PCC 1:3:6 and including taking down and removing rubbish material to outside MD land complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 26 daysJul 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 28 days