Tender For Repair/ Replacement Of Joinery Work, Rain Water Pipe, Sanitary/ Water Supply Fittings And Allied Repair Works In C2a & C2b And Fafa Under Ge East Mathura
Tender Value
45 Lakhs
Estimated cost
Bid Submission
20 Jul 2026
12 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mathura → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/ Replacement Of Joinery Work, Rain Water Pipe, Sanitary/ Water Supply Fittings And Allied Repair Works In C2a & C2b And Fafa Under Ge East Mathura
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkhat or frames with shutters w/o taking off shutters from frame area n.exc 1.50 Sqm each.all as specified and directed by Engineer-in-Charge. |
| 2 | Taking down chowkhat or frames with shutters w/o taking off shutters from frame area 1.5 Sqm but n.exc 4.00 Sqm eachall as specified and directed by Engineer-in-Charge.. |
| 3 | S&F Pressed steel frames of size 125x60 mm made out of 1.25mm steel sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., with one shop coat of red oxide primer complete as specified and as directed. |
| 4 | S&F Pressed steel frames of size 105x60 mm made out of 1.25mm steel sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., with one shop coat of red oxide primer complete as specified and as directed. |
| 5 | Taking down Shutters of any description exc 1 sq. m and n exc 2 sq. m each all as specified and directed by Engineer-in-Charge. |
| 6 | M&L for PCC 1:3:6 type C-0 (using 12.5 mm graded stone aggregate) as in filling of pressed steel frame complete. all as specified and directed by Engineer-in-Charge. |
| 7 | Cutting holes in existing wall or PCC Block masonry built in cement mortar or cement lime mortar and stone walls built in lime mortar for inserting holdfast and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required depth of embedded portion of holdfast or lugs measured from the face of jamb into the wall exceeding half brick but not exceeding one brick all as directed. |
| 8 | S&F 35 mm thick factory made flush shutters, solid core construction with block board core and plywood face panel veneer type on both side complete all as specified and as directed. |
| 9 | S&F 35 mm thick factory made glazed and skeleton shutters of 2nd class HW, open rebated and prepared to receive glass/gauze etc edges or framing plain chamfered or rounded fitted with cut or mitred beads for securing glass etc as specified in SSR pt-1 section 8.20 (a) complete all as specified and as directed. |
| 10 | S&F Solid PVC door frame of size 50mm x 47mm made out of 5 mm colour/ printed PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification. |
| 11 | Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), wood free EPS filling with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm colour PVC sheet on back face, supplying & fixing in frame at site as per specification |
| 12 | S&F Aluminium handles, cast type, anodised 150 mm long. |
| 13 | S&F 150 mm Aluminium, anodised, barrel tower bolts of extruded section and fixed. |
| 14 | S&F 250 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed in repair |
| 15 | S&F 100 mm stainless steel Butt hinges including screws complete all as specified. |
| 16 | S&F Aluminium floor door stopper 2 legs runner shoes at and 150mm long. |
| 17 | S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as directed by Engr-in-Charge. |
| 18 | S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete but without glazing bars, dovetailed or welded complete all as directed by Engr-in-Charge. |
| 19 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed. |
| 20 | S& F fixed 4mm thick sheet glass ordinary quality nexc 0.50 Sqm each pane including necessary cleats, glazing clips rubber packing, anodised aluminium snap beading, screws in aluminium windows. |
| 21 | S& F fixed 4mm thick sheet glass ordinary quality exc 0.50 Sqm but not exc 1.00 Sqm each pane including necessary cleats, glazing clips rubber packing, anodised aluminium snap beading, screws in aluminium windows. |
| 22 | S & F 4 mm thick pin headed/figured/frosted glass ordinary quality and glazing with oil putty/wooden beading in square n.exc. 0.5 sqm in each pane |
| 23 | Dismantling of mild steel work of any description not other wise provided for. |
| 24 | S&F MS Framed work such as grills gratings , door and cooler stand, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars confirming to Fe.290.Gde-E-165 |
| 25 | M&L for Aluminium frame powder coated (minimum thickness of powder coating 50 micron) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed. |
| 26 | S&F Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. fixing in frame at site complete all as specified and as directed. |
| 27 | M&L for Aluminium anodised window and ventilator shutters, with or without sash bars without sash bars, aluminium sections weighing 0.55 kg/m powder coated (minimum wt of powder coating 50 micron) including necessary joitning cleats, glazing clips, rubber packing, aluminium snap beading, screws, anodised aluminium fittings such as locking arrangements complete all as specified and as directed. |
| 28 | M&L for Aluminium grill powder coated including channel, beading and joining cleat etc complete fixing for sliding, fixed or casement type window/ ventilator frame (minimum thickness of powder coating 50 micron) . complete all as specified and directed. |
| 29 | S&F in repair aluminium partition wall of section as in frame /single double grove of size 63.5 x 38.1 x 2mm thick of make Jindal or equivalent including 5 mm thick tinted glass , 5 mm thick ACP sheet with all necessary fittings. Vertical section has to be supported with angle of size 65 x 65 x 6 mm thick including making good of existing surface complete all as specified. |
| 30 | S&F 5.5 mm thick sheet glass tinted quality and glazing with aluminium beading n exc 0.5 sqm in each pane complete all as specidfied and as directed. |
| 31 | S&F 5.5 mm thick sheet glass tinted quality and glazing with aluminium beading exc 0.5 sqm in each pane complete all as specidfied and as directed. |
| 32 | S&F 5mm thick, ACP sheet including rubber gas cut etc in aluminium door shutter complete all as specified and directed by Engr in charge. |
| 33 | S&F for 100mm aluminium barrel tower bolts powder coated of extruded section and fixed complete all as specified and directed. |
| 34 | S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples. |
| 35 | S&F in repair Stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.18mm with stainless steel wire staples |
| 36 | S&F in repairs Floor door stopper of brass body, and tongue with hard drawn steel spring hard overall length of cover plate 140mm complete all as specified and as directed. |
| 37 | S&F in repairs PVC door seal 1.20 Mtr long fixed with wooden/ Aluminium door complete all as specified and as directed. |
| 38 | S&F in repairs stainless steel peg set of 8 hooks fixed with wall or wooden door complete all as specified and as directed. |
| 39 | S&F in repairs 25mm dia stainless steel curtain rod cut to size and fixed in position including fixing knobs, brackets stops roller end caps etc. complete all as specified and directed. |
| 40 | S&F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed in position. Make: Godraj / Sandhu / Everest |
| 41 | S&F Mortice lock vertical type of mild steel 4 levers of size 100mm all as specified. Make : Godrej, ozone or equivalent. |
| 42 | S&F in repair 100 mm size mortice lock of brass, vertical type, 4 levers, complete all as directed. |
| 43 | S&F in repair stainless steel lock fixed to toughen glass door shutter, horizontal type, 4 levers, complete all as directed.Make:- Godrej, ozone or equivalent. |
| 44 | S&F in repairs aluminium extruded section body Door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed complete all as sepcified and as directed. |
| 45 | Dismantling boardings as in Kitchen cabinets/ cupboards any thickness complete all as specified and as directed. |
| 46 | S&F 18 mm thick hybrid wood polymer composite panel (WPC) board for kitchen cabinet / cupboard cabinet shutter, one side decorative laminated and other side white balancing having density 600 Kg/cm, fixed with necessary stainless steel driliing screw/ anchoring bolt etc,Design and colour approved by GE complete all as specified. |
| 47 | S&F 18 mm thick hybrid wood polymer composite (WPC) board in cupboard shutter/kitchen cabinet with both side balancing white, fixed with necessary stainless steel drilling screws/anchoring bolt design and colour as approved by GE, complete all as specified and directed. |
| 48 | S&F 12 mm thick hybrid wood polymer composite (WPC) board in cupboard shutter/kitchen cabinet , one side decorative laminated and other side white balancing, fixed with necessary stainles steel drilling screws/anchoring bolt, design and colour as approved by GE complete all as specified and directed. |
| 49 | S & F stainless steel 304 grade kitchen modular basket for storgage of plates cups, grains basket, glass cutlery, bottles etc as per required size, as approved by GE, complete all as specified and directed. Make: Godrej / Hindware / Lifetime |
| 50 | S & F Ball bearing runners 45 mm size Telescopic full extension load capacity 50 kgs, of stainless steel grade SS-304 complete as approved by GE. Make: Kaff / Hettich / Hafele / Godrej |
| 51 | S&F Magnetic catcher (KTS-20) full extension load capacity 8 kgs complete all as specified and as directed. Make : KAFF/Godrej/Hettich |
| 52 | S&F stainless steel handles 100 mm size for kitchen cabinet, cupboard shutters, as approved by GE, complete all as specified and directed. |
| 53 | S&F stainless steel hasp and staple 100 mm long, including bolt to hinge plate and fixed with screws, complete all as specified and directed. |
| 54 | S & F Continuous (piano) hinges, mild steel, bright finish or elec trogalvanised with 40mm flaps width for shutters complete all as specified and as directed. |
| 55 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and as directed. |
| 56 | M&L for Vitrified Ceramic light shade tiles 10 mm thick (square/ rectagular) polished,area of each tiles exceeding 0.38 sqm but nexc 0.900 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed bed in cement motar 1:4 complete all as specified and as directed. |
| 57 | All as per item above here-in-before but as in skirting/dado laid over and including 10 mm thick rendering in cement motar 1:3. complete all as specified and as directed. |
| 58 | M&L for Non Skid ceramic joint free coloured tiles 7 to 8 mm thick, (Square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed bed in cement motar 1 : 4 complete all as specified and as directed. |
| 59 | M&L for Glazed ceramic coloured tiles of size 600x300x7-8mm thick as on vertical surface set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10 mm thick rendering in cement motar 1:3 complete all as specified and as directed. |
| 60 | Taking up or down 15 mm bore of dia steel tubing and connections, including cleaning for refixing or removal from site complete all as specified and as directed. |
| 61 | S&F steel tubing, medium grade, galvanised 15 mm bore including all fittings fixed complete to walls and ceiling or laid in floor complete all as specified and as directed. |
| 62 | M&L for Cutting chases pinning in, making good to facing where reqd. and pointing in CM 1:3 to ends or edges of landing ,steps, cills, sunshades,selfs lintels etc. and cutting chases for conceled for water tubing or conceled condute wiring etc and making good, cutting n.exc 10cm girth.complete all as specified & as directed |
| 63 | Taking up or down 20 mm bore of dia steel tubing and connections, including cleaning for refixing or removal from site complete all as specified and as directed. |
| 64 | S&F steel tubing, medium grade, galvanised 20 mm bore including all fittings fixed to walls and ceiling or laid in floor complete all as specified and as directed. |
| 65 | S&F in repairs 1000 Litre capacity Rotational moulded polyethylene water storage tanks, white colour, triple layered (cylindrical vertical with closed top) , hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & PTMT float valve 20mm bore with ball and rod of high density & tank nipple complete as specified in SSR Part-I. Make : Sintex' Pure'/ Sopreme 'white'/ Vecctus 'Smart'. |
| 66 | S&F in repairs 500 Litre capacity Rotational moulded polyethylene water storage tanks, white colour, triple layered (cylindrical vertical with closed top) , hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & PTMT float valve 20mm bore with ball and rod of high density & tank nipple complete as specified in SSR Part-I. Make : Sintex' Pure'/ Sopreme 'white'/ Vecctus 'Smart'. |
| 67 | S&F in repair gun matel, globe or gate valves 20 mm bore dia, with iron wheel head, screwed both ends for iron pipe and fixed as specified. |
| 68 | S&F in repair EWC 650x340x740mm S trap Athos One-Piece Rimless Western Commode with In-Built Jet & Siphonic Flushing System combination pattern including cistern and other connected accessories and fixing to floor complete all as specified and directed.Make: Cera/Kohler/Jaquar |
| 69 | S&F in repair Vitrreous china wash down water closet pedestral pan white, Plstic water closet seat, closed pattern with recessed bottom, and seat cover and mild steel chromium plated or aluminium hanging device, complete all as specified and as directed. Make: Cera/Kohler/Jaquar |
| 70 | S&F in repair vitreous chinaware wash hand basin white flat back size 545x400mm including pedestal pillar excluding taps, chain but including brackets waste coupling and waste pipe complete all as specified and as directed. Make Jaquar/Kohler/Cera |
| 71 | M&L in repair single lever WHB mixer 15mm bore cast copper alloy chromium plated 450mm braided connection pipe without pop up complete all as specified and as directed. Make : Jaquar Cat part No KUP-CHR-35011BPM/ Kohler Cat Part No: K-33063IN-4ND-CP ./Cera Cat Part No: F1014451 |
| 72 | S&F in repair pillar tap cast copper alloy chromium plated, fancy type with capstan heads,screwed down high pressure,with or without letters Hot or Cold with long screwed shank and fly nuts, screwed for iron pipe 15 mm bore dia complete all as specified and as directed.Make : Jaquar/Kohler/CERA |
| 73 | S&F in repair cast copper alloy chromium plated Angular cock for 15 mm dia bore iron pipe with wall flange complete all as specified as directed.Make : Make: Jaquar Cat Part No: KUP-CHR-350553PM/ Cera Cat Part No: F-1014201/ Kohler Cat Part No: K-80154IN-4AV-CP . |
| 74 | S&F in repair Bip tap long body cast copper alloy chromium plated screwed down high pressure with crutch or butterfly handle screwed for iron pipe of 15mm bore dia complete all as specified and as directed Make : Make Jaquar Cat Part No: KUP-CHR-35037/ Cera Cat Part No: F-1014152/ Kohler Cat Part No: K-16093IN-4-CP . |
| 75 | S&F in repair Wall Mixer head and hand arrangement combination pattern including Telephonic hand shower, flexible tube and hook connecting legs and wall flanges, crutch etc complete all as specified. Make Jaquar Cat Part No: LYR- 38145/ Cera Cat Part No: F-1014411& F7030102AB/ Kohler Cat Part No: 98754IN-4-CP |
| 76 | S&F in repair chromium plated over head shower (300x300)mm of square shape with 600 mm long arm complete all as specified and directed. Make Jaquar Cat Part No: OHS-CHR1639/ Cera Cat Part No: F-7010109SS/ Kohler Cat Part No: K-73038IN-CL-CP . |
| 77 | S&F in repairs concealed stop cock reduced body with adjustable wall Flange for 15mm bore pipe complete all as specified and as directed. Make : Jaquar/Kohler/Cera |
| 78 | S&F in repair cast copper alloy chromiumplated two way Angle cock 15 mm bore with wall flange complete all as specified and as directed. Make : Jaquar/Kohler/Cera |
| 79 | S&F in repair two way bib cock cast copper alloy chromium plated superior quality with wall flange fixed to 15mm bore dia iron pipe complete all as specified and as directed. Make: Jaquar Cat part No KUP-CHR-35041PM/ Cera Cat Part No: F-1014161/ Kohler Cat Part No: K-16094IN-CP |
| 80 | S&F in repair Soap dish, of CP brass body and rectangular in shape, fixed to plugs with chromium plated brass screws Make : Jaquar Cat part No AKP-CHR-35731P/Cera Cat Part No: F-5012116CH/ Kohler Cat Part No: K-25069IN-CP |
| 81 | S&F in repair towel rack of 600mm long with lower hangers of approved make complete all as specified and directed. Make: Jaquar Cat part No CPA-CHR-1181FH/Cera Cat Part No: F-5012101CH/ Kohler Cat Part No: K-25066IN-CP |
| 82 | S&F in repairs stainless steel sink with draining board made out of 1.0 mm thick sheet for kitchen incl waste pipe CI cantilever brackets and waste coupling etc complete and making good to the side of wall,connecting union to pipe, including bedding in CM to dwarf wall. Overall size 915mmx460mm bowl and size 410x330x160mm complete all as specified and directed. |
| 83 | S&F in repair sink mixer with EXTENDED swinging spout 450mm long (wall mounted model )with connecting legs and wall flanges for 15mm bore dia iron pipe complete all as specified and as directed. Make Jaquar Cat Part No FLR-CHR-5309N/ Cera Cat Part No: F-1014501 / Kohler Cat Part- No 37315 IN-4-CP. |
| 84 | S&F in repair PVC valveless syphonic action type flushing cistern (Low or high level) of 10 litre capacity, white/coloured with inlet ball valve, float, dual flushing system including fixing brackets and 32 mm bore PVC flush pipe etc complete all as specified and directed. |
| 85 | S&F in repair Hand jet health faucet 15 mm bore with CP flexible tube 1.2m and all connected fittings complete all as specified and as directed. Make: Jaquar Cat part No ALD-CHR-565GA/ Cera Cat Part No:F-8030116AB/ Kohler Cat Part No: K-12927IN-CP |
| 86 | S&F in repair tolilet paper holder of stainless stell fixed to walls with chromium plated (CP) brass screws complete all as specified and as directed. Make: Jaquar Cat part No AKP-CHR-35753PS/ Cera Cat Part No: F-5007110/ Kohler Cat Part No: K-5633IN-CP |
| 87 | S&F in repair 600x450 mm bevelled edge mirror of selected quality glass mounted on 6 mm thick commercial plywood and fixed to wooden, plug with chromium plated brass screws and cup washer complete as specified and as directed. Make: Prayag/ Commander/ Polytuf |
| 88 | S&F in repairs bathroom cabinet mirror (of approved pattern) of size 450mmx 350mm regular size with mirror and PVC shelves complete all as specified and as directed.Make:- Prayag /Commander / Polytuf |
| 89 | S&F in repair Corner glass shelf with SS bracket fixed to wall complete all as specified and as directed. Make: Jaquar Cat part No ACN-CHR-1173/ Cera Cat Part No: F-5005102/ Perryware Cat Part No: T 6010A1 |
| 90 | S&F in repair PVC connections 15mm size with PTMT nuts of length 450 mm including fixing complete all as specified and as directed. |
| 91 | S&F PVC connections 15mm size with PTMT nuts of length 600 mm complete all as specified and as directed. |
| 92 | S&F in repairs sheet glass assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed. Make: Jaquar/ Cera/ Perryware |
| 93 | S&F in repair tubular towel rail of brass Chromium plated 20mm dia, ‘D’ type 60cm long between flange complete all as specified and directed. Make: Jaquar Cat part No CPA-CHR-1111/Cera Cat Part No: F-5013104CH/ Kohler Cat Part No: K-25065IN-CP |
| 94 | S&F in repairs PVC flexible waste pipe 32 mm dia for WHB complete all as specified. |
| 95 | S&F in repairs 75mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints laid in trenches or fixed to wall incl necessary clamps etc incl dismantling old pipes |
| 96 | S&F PVC (SWR) bends any radius 75mm bore. |
| 97 | S&F in repair PVC (SWR) floor trap plain with S S grating including jointing with solvent cement dia of out let 75 mm. |
| 98 | S&F in repairs 110mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to walls or laid in trenches incl necessary clamps etc incl dismantling old pipes. |
| 99 | S&F PVC (SWR) bends any radius 110mm bore |
| 100 | S&F PVC (SWR), vent cowl 110 mm bore. |
| 101 | S&F in repairs Brass chromium plated bottle traps of 32mm bore dia of discharge pipe having min water seal of 25mm for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and as directed. |
| 102 | S&F in repairs Grating doom 100mm dia with or without hole of Stainless steel (Minimum weight 25gms) complete all as specified and as directed. |
| 103 | M&L for preparation of old decorative surfaces of walls and applying one coat of oil bound distemper complete all as specified and as directed. |
| 104 | M&l for preparation of old surfaces of wall and applying one coat of white wash complete all as specified and directed. |
| 105 | M&L for preparation of old plastered surface of ceiling and applying one coats of white wash all as specified and directed by engineer in charge. |
| 106 | M&L for complete removal of existing treatment from old plastered surfaces of walls and applying two coats of oil bound distemper, white or tinted complete all as specified and as directed. |
| 107 | M&L for providing wall care putty 2mm thick on plastered surfaces of wall complete as specified and as directed. |
| 108 | M&L for complete removal of old decrative treatments from walls and preperation of old decorative surfaces of wall and applying two coats of weather proof acrylic exterior paint light shade over a coat of primer (100% Acrylic) over 1mm thick wall care putty using spray machine, spray hard to receive area to achieve excellent application using limited manpower including scaffolding, trestles, ladders, cradles and necessary safety measures upto the height of (G+2) floorcomplete all as specified and as directed. |
| 109 | M&L for preperation of old decorative surfaces of wall and applying a coat of weather proof acrylic exterior paint light shade using spray machine, spray hard to receive area to achieve excellent application using limited manpower including scaffolding, trestles, ladders, cradles and necessary safety measures upto the height of (G+2) floor complete all as specified and as directed. |
| 110 | M&L for preparation of old surface and appling one coat of French polish on old wooden surfaces of any description, width or girth complete all as specified and directed |
| 111 | M&L for preparation of old decorative surface of walls and applying one coat of cement base paint on walls complete all as specified and as directed. |
| 112 | M&L for preparation of old painted steel surface of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint all as specified & directed by Engineer-in-Charge |
| 113 | Dismantling wall and ceiling boards (fiber, pulp, insulation, etc) or insulation board/slabs/blankets, any thickness, including cover fillets. |
| 114 | Providing and fixing inter locking metal grid (snap grid for false ceiling) of size 605 mm x 605 mm in true horizontal level, hot dipped galvanized steel sections (galvanized @ 120 grams/sqm, both side inclusive) consisting of main “T” runner with suitably spaced joints to get required length and of size 24 mm X 38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross “T” of size 24 mm X 28 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main “T” at 600 mm center to center to form a grid of 1200 mm x 600 mm and secondary cross “T” of length 600 mm and size 24 mm X 28 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200 mm X 600 mm panel to form grids of 600 mm X 600 mm and wall angle of size 24 mm X 24 mm X 0.4 mm. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27 mm X 37 mm X 25 mm X 1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 mm X 30 mm X 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications and as directed by Engineer-in-charge. |
| 115 | M&L for 4 mm thick designer non-asbestos fibre cement building board having fire resistance & moisture resistance properly. Make :- Everest, fixed on aluminium grid with screws complete all as specified and directed. |
| 116 | S&F Hollow PVC Wall lining consisting of 5-10mm thick plain colour PVC sheet and including 5mm thick PVC sheet fillet wall panelling inclusive of fixing on wall to make PVC frame for fixing the PVC sheet inclusive of solvent cement complete all as specified and directed. |
| 117 | M&L Preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete. |
| 118 | M&L Preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysJul 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender