Tender For Special Repair To Building No P-188(Atc) Of Army Avn Sqn Base Under Age (I) Cif (K)
Tender Value
1.30 Crore
Estimated cost
Bid Submission
03 Aug 2026
21 days left
EMD
2.05 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Srinagar → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Building No P-188(Atc) Of Army Avn Sqn Base Under Age (I) Cif (K)
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 2 | S&F Pre- painted camoflage pattern galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed. |
| 3 | S&F prepainted camoflage pattern galvalume aluminium zinc coating GI base plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof, fixed with self tapping screws as specified, complete all as specified and directed. |
| 4 | Dismantling unframed timber scantling 40 sqcm & over in section framed in any position complete all as specified and directed. |
| 5 | M&L 2nd class soft wood, clean sawn as in scantling complete all as specified and directed. |
| 6 | M&L preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with creosote oil complete all as specified and directed. |
| 7 | S&F 15mm thick 2nd class soft wood clean sawn boarding as in Eaves board fixed with nails in any situation complete all as specified and directed. |
| 8 | Dismaintling wrought iron or mild steel work of any description not other wise provided for complete all as specified and directed. |
| 9 | M&L rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe 410 -W (Gde- E- 250) quality- A complete all as specified and directed. |
| 10 | Taking down cement plastering on stone wall/brick wall etc including racking out of joints hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 11 | M&L 15mm thick rendering on wall in CM 1:6 on brick/concrete surface and finishing the surface even and smooth with out using extra cement complete all as specified and directed. |
| 12 | M&L preparation of new plastered surfaces on walls and applying two coats of oil bound distemper over 3mm thick wall care putty complete all as specified and directed. |
| 13 | M&L preparing old plastered or unplastered surfaces of walls for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over surfaces complete all as specified and directed. |
| 14 | Dismantling floor, hearth or wall tiling including cement mortar bedding removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 15 | M&L vitrified ceramic tiles light Shade/Double charged/ultracharged not less than 10mm thick (square/rectangle) polished area of each tiles exceeding 0.42 sqm but not exceeding 1.0 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 16 | M&L vitrified ceramic tiles light Shade Shade/Double charged/ultracharged not less than 10mm thick (square/rectangle) polished area of each tiles exceeding 0.42 sqm but not exceeding 1.0 sqm in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick cement plaster in CM 1:4 complete all as specified and directed. |
| 17 | M&L Glazed ceramic coloured tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick rendering in CM(1:4) complete all as specified and as directed. |
| 18 | M&L shimla Pattern tiles in vertical surface 300x150x10mm thick set and jointed in neat cement slurry and polishing match over and including 10mm thick rendering in CM(1:4) complete all as specified and as directed. |
| 19 | Dismantling Stone Slabs and tiles of any decription or thickness in floors, apron etc laid bedded and pointed in any mortar complete all as specified and directed. |
| 20 | M&L 20mm Granite (of any type) work( table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including15mm thick rendering in CM(1:6) complete all as specified and as directed. |
| 21 | Rounding/moulding to edges of Kota stone slabs, marble stone, granite stone slabs one edge, such as in steps, cooking platform, and other similar situations etc complete all as specified and directed. |
| 22 | Taking up or down 15 mm bore steel tubing and connection including cleaning for re-fixing or removal to store complete all as specifed and directed. |
| 23 | M&L 25mm outer dia 3-layer PP-R P o l y p r o p y l e n e random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or in floors etc complete all as specified and directed. |
| 24 | Taking up or down 20 mm bore steel tubing and connection including cleaning for re-fixing or removal to store complete all as specifed and directed. |
| 25 | M&L 32mm outer dia 3-layer PP-R P o l y p r o p y l e n e random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or in floors etc complete all as specified and directed. |
| 26 | Cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of shelves, for water tubing etc and making good, cutting exceeding 10cm girth but not exceeding 20cm girth in stone walls complete all as specified and directed. |
| 27 | Dismantiling of water tanks of capacity exceeeding 250 and not exceeding 500 ltrs including all necessary fittings complete all as specified and directed. |
| 28 | S&F 500 ltrs PVC rotational moulded polyethylene water storage tanks double layer made (cylindrical vertical with closed top) hoisted and fixed in position all as spd in SSR part-I complete all as specified and directed. |
| 29 | S&F 32 mm dia PPP-R Ball valve (Brass inserted) as per requirment of the site complete all as specified and directed. |
| 30 | S&F wash hand basin (vanity) long pattern type of 78cmx48cm including all fittings with decorative cabinet with Door/Shutter and 02 No drawers complete all as specifed and directed. |
| 31 | S&F Vitreous China Water closet one piece of \\" size (WxPxH) 365x650x760mm white with 'P' or 'S' trap,Model- LAUREN of Make - Somany Bathware, or of equivalent of Make- JAQUAR, CERA/ PARRYWARE etc as approved by AGE (I) complete all as specified and directed. |
| 32 | S&F health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25mtr long flexible tube and ABS wall hook including making connection and fixed in position complete all as specified and directed. |
| 33 | S&F 600x450 bevelled edged looking mirror 2mm thick of selected quality glass, mounted on 4 mm thick PVC sheet and with aluminnium frame work fitted with chromium plated brass screws and cup washers including taking old one complete all as specified and directed. |
| 34 | S&F in repairs 15mm dia stop valves/angle valve chromium plated, fancy type with long shank and cup screwed down, highpressure with crutch or butterfly handle, screwed both ends for iron pipe or for unlori complete all as specified and directed. |
| 35 | S&F in repairs brass CP wall mixer fancy type chromium plated for mixing hot and cold water screwed down for iron pipe complete all as specified and directed. |
| 36 | S&F 15mm PVC connection 450mm long with PTMT nuts of superior quality complete all as specified and directed. |
| 37 | S&F in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. |
| 38 | S&F in repair tubular towel rail aluminium anodised 20mm dia, D type, 60 cm long with brackets complete all as specified and directed. |
| 39 | S&F in repairs soap dish, stainless steel, approximate size 160x160x90mm complete all as specified and directed. |
| 40 | S&F in repairs vitreous China urinals, full stall urinals (back or corner wall type), complete including providing and fixing plugs and spreader, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed. |
| 41 | Taking down chowkats or frames with shutters (without taking of shutter from the frame) of any description alongwith fittings not exceeding 1.5sqm each complete all as specified and directed. |
| 42 | Taking down chowkats or frames with shutters (with out taking of shutter from the frame) of any description alongwith fittings exceeding 1.5sqm and not exceeding 4 sqm each complete all as specified and directed. |
| 43 | S&F PVC Door frames of size 50 mm x 47 mm made of 5 mm single side pr-lam colour PVC sheet and edges will be painted to match with pre lam sheet reinforced with MS square tube, suppling and fixing in opening as per specification and drawing. |
| 44 | S&F Factory made Solid PVC Moulded Door Shutter with particle board core, 28 to 30 mm thick (stiles), with 2,4, or 6 raised panel design with 2 mm thick Moulded PVC sheet on the front face & 2 mm Plain colour PVC sheet on back face, supplying and fixing in frame at site as per specification & Drawing |
| 45 | S&F factory made uPVC white colour casement (Openable)window area exceeding 1.0 Sqm but n exc 2.0 Sqm each made of extruded profiles with wall thickness of 2.3mm (+-0.2mm). Window profile with hollow section with multi chamber, frame (60mmx58mm), between two shutters) (60mm x 74mm), Glazing bead (35 corners, including drilling of holes for fixing hardware and drainage of water etc. making arrangement for fixing of hardware. EPDM gasket 1.2 +- 0.2 mm thick, galvanized steel frame (28mm x 21.5mm), sash (31mm x 27.5mm). T profile (27mm x 17 mm) to be inserted in required profile,frame will be fixed to the wall with 8 mm x 100 mm long fasteners. Hardware: casement handle made of zinc alloyed(white powder coated), Butt hinges of zinc alloyed (white powder coated), transmission gear made of mild steel with multi point locking system and 5mm thick glazing with selected quality glass.Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose. |
| 46 | S&F factory made uPVC white colour casement (Openable)window area exc 2.0 Sqm each made of extruded profiles with wall thickness of 2.3mm (+-0.2mm). Window profile with hollow section with multi chamber, frame (60mmx58mm), between two shutters) (60mm x 74mm), Glazing bead (35 corners, including drilling of holes for fixing hardware and drainage of water etc. making arrangement for fixing of hardware. EPDM gasket 1.2 +- 0.2 mm thick, galvanized steel frame (28mm x 21.5mm), sash (31mm x 27.5mm). T profile (27mm x 17 mm) to be inserted in required profile,frame will be fixed to the wall with 8 mm x 100 mm long fasteners. Hardware: casement handle made of zinc alloyed(white powder coated), Butt hinges of zinc alloyed (white powder coated), transmission gear made of mild steel with multi point locking system and 5mm thick glazing with selected quality glass. Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose. |
| 47 | M&L 4 mm thick Alumimium composite pannel with decorative color and fixed with screw or aluminium beading to aluminium frame complete all as specified and directed. |
| 48 | S&F 12mm thick Toughened glass as in hinged door, partition automatic doors/uPVC window and similar work including cutting shape, drilling holes, grinding/polishing and rounding off edges of glass, including door handle, hinges and other fixing arrangment etc complete all as specified and directed. |
| 49 | S&F aluminium alloy anodised sliding door bolts 250 mm long with hasp, staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded sections complete all as specified and directed. |
| 50 | S&F aluminium anodised barrel tower bolts of extruded section 150mm long complete all as specified and directed. |
| 51 | S&F door closer hydraulically regulated designation No 2 aluminium (die cast body) universal type suitable for door shutters of 701 to 850 mm in width and weight between 36 to 60 kg and fixed complete all as specified and directed. |
| 52 | S&F 1.25 mm thick Steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type including dismantiling complete all as specified and directed. |
| 53 | S&F Ball bearing for rolling shutters complete all as specified and directed. |
| 54 | S&F Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed. |
| 55 | M&L applying two coats of synthetic enamelled paint over one coat of red oxide primer including preparation of new steel surfaces of any description not otherwise described over 10 CM girth or width complete all as specified and directed. |
| 56 | S&F providing and fixing stainless steel (grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and makind curvature (where ever required) and fitting the same with necessary stainless steel nuts nad bolts etc., of required size on the top of floor or the side of waist slab with suitable arrangement. complete all as specified and directed. |
| 57 | Dismantling boarding /false ceiling of any description fixed in any posn with nails complete all as specified and directed. |
| 58 | M&L Gl frame work Size of grid 605 x 605mm for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exceeding 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified and directed. |
| 59 | S&F 12 mm thick Gypsum board of size 600mm x 600mm as in ceiling fixed on GI frame work complete all as specified and directed. |
| 60 | S&F 15mm thick 2nd class soft wood boarding as in wall panelling, plain one side and edges tonged and grooved or rebated, fixed with nails in any situation including french polishing on surface oa any description width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats complete all as specified and directed. |
| 61 | S&F high density WPC (wood plastic composite) louvers panel as in wall panelling 25 mm thick of any length and width fixed on wall surface including of fixing of L corner, buckle with selftapping screws or any other accessories complete all as specified and directed. The specification of materil is as under:- (a) The length of WPC panel should have in a single piece and width lie between 203mm to 150mm(b) Looks and feels like natural wood.(c) 100% non-toxic, non-formaldehyde, environmental friendly. (d) Water-proof;termite-proof.(e) No cracking, anti-impact with high density.(f) Anti-UV, good color fastness.(g) No glue, no need to paint and can be painted.(h) Easy installation and low maintenance.(j) Waether resistant.(k) Flame retardant.(l) Colour and make will be approved by AGE (I). |
| 62 | Taking down carefully copper/aluminium point wiring (light, fan, light & power socket) complete with fittings and fixtures such as switches, ceiling rose, pendents, regulators, socket, lampholders brackets, bulk head fitting, tube lights etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and also making good distrubed surfaces of wall,floors etc complete all as specified and directed. |
| 63 | M&L point wiring in replacement with 1.5 sqmm copper conductor (Multistranded) PVC insulated and unsheatheted FRLS electric cable 1100 volts grade and including PVC casing caping/conduit pipe of suitable size with all fittings accessories and including PVC insulated electric cable 1100 volts 1.5 sqmm (multi stranded) copper conductor single core (Green colour) cable as continious earth wire connected to common earth dolly including sunk sheet terminal box made out of 1.6 mm thick MS sheet concealed on wall or on surface as per site requirement and making good distrubed surface of wall ,covered with 3 mm thick plastic laminated sheetfor one light point/fan point/Bell point controlled by one,one way switch complete all as specified and as directed. |
| 64 | Description all as per item No 63 One bell/ buzzer point controlled by one push button on the same board with other switches or independent with cables1.5 sq.mm. size complete all as specified and directed. |
| 65 | Description all as per item no 63 above, but for one 3 pin socket out let 5 amp on the independent board complete all as specified and directed. |
| 66 | Description all as per item no 63 above, but for one socket out let 15 amp on the independent board with 2.5 sqmm copper conductor multistranded pvc insulated and unsheathed electric cable 1100 volts (ISI MARKED) including PVC insulated and unsheathed electric cable 1100 volt 2.5 sqmm copper stranded conductor as continious earth wire connected to common earth dolly complete all as specified and directed. |
| 67 | Description all as per item no 63 above ,but for one 3 pin socket outlet, 15 Amps, independent, with cables 4 sqmm size complete all as specified and directed. |
| 68 | S&F in replacement modular switch piano button flush type, single pole one way 6 amps complete all as specified and directed. |
| 69 | S&F in replacement modular socket 6A, 2/3 pin combined 2 module complete all as specified and directed. |
| 70 | S&F in replacement modular switch piano button flush type, single pole one way 16 amps complete all as specified and directed. |
| 71 | S&F in replacement Modular socket 6A/16A, 2/3 pin combined 2 module complete all as specified and directed. |
| 72 | S&F in replacement ceiling rose surface bakelite 3 terminals 65 x 50mm complete all as specified and directed. |
| 73 | S&F in replacement Modular Bell push 6A 1 module one way complete all as specified and directed. |
| 74 | S&F in replacement Single pole and neutral enclosure with a two pin and earth plug and socket complete with one double pole MCB 20 A complete all as specified and directed. |
| 75 | S&F in replacement Metal flush box 1/2 module complete all as specified and directed. |
| 76 | S&F in replacement Metal flush box 3 module complete all as specified and directed. |
| 77 | S&F in replacement Metal flush box 4 module complete all as specified and directed. |
| 78 | S&F in replacement Metal flush box 8 module complete all as specified and directed. |
| 79 | S&F in replacement White cover plate with frame, 2 module complete all as specified and directed. |
| 80 | S&F in replacement White cover plate with frame, 3 module complete all as specified and directed. |
| 81 | S&F in replacement White cover plate with frame, 4 module complete all as specified and directed. |
| 82 | S&F in replacement White cover plate with frame, 8 module complete all as specified and directed. |
| 83 | S&F in replacement electric ding dong bell, 230 volt AC, single pole, complete all as specified and as directed. |
| 84 | S&F in replacement LED Lights fitting 20 watt,220V, AC Decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 85 | S&F in replacement LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed. |
| 86 | S&F in replacement sheet metal enclosures for MCBs, single pole and neutral, 8 ways 240 Volts double door type complete all as specified and directed. |
| 87 | S&F in replacement Distribution board iron clad TPN DB, double door with IP-43 1K-09 protection suitable for MCB as incommer and MCB as outgoing 415 Volts 3 phase 50 C/s 6 way, complete with appropriate size copper bus bar complete including cutting chases to wall for fixing DB and making good the disturbed wall surface all as required at site or complete all as specified and directed.Note: MCB's will be measured and paid seperately under relevent items |
| 88 | S&F in replacement SPN 40 to 63 Amp, type 'C'10KA, 240 Volts complete all as specified and directed. |
| 89 | S&F in replacement MCB SP 5 to 32 Amp, 'C'10KA, 240 Volts complete all as specified and directed. |
| 90 | S&F in replacement 415V 10KA 'B' curve miniature circuit breaker (MCB) of TPN 40 to 100 AMP poles and current carrying capacity in the DB complete with connection testing and commissioning complete all as specified and directed. |
| 91 | M&L in replacement for earthing complete with galvanized steel earth plate electrode 60 x 60cm x 6 mm thick burried directly in ground vertically to a depth not less than 2.25 mtr deep below GL with top edge of the plate not less than 1.5 mtr below normal GL and connected to earth plate surrounded by 15 cm thick packed layers of charcoal dust and common salt and connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvd iron or steel and thimbles and other end of the earth wire connected to DB and protected by galvd iron or steel pipe light grade 15 mm bore and water pipe 20mm bore GI light grade with funnel and wire mesh, including all necessary excavation and earth work PCC chamber in cement concrete 1:3:6 type C-2 and RCC cover and all as shown in electrical plate No 3 of MES schedule Pt I of 2009 complete all as specified and directed including testing on completion.Note : RCC pit cover shall be pre-cast of RCC (1:2:4) type B-I , 80mm thick reinforced with XPM weighting not less than 4 KG/sqmm in lieu of CI cover. |
| 92 | M&L in replacement for Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4.0 mm dia galvanised iron or steel wire complete all as specified and directed. |
| 93 | M&L in replacement for sub main wiring with two single core FRLS, PVC insulated, stranded, unsheathed cable copper conductor with size 10 Sqmm and drawing through & including Non metallic PVC conduit concealed in wall including earth continuity conductor of size 10 Sqmm PVC insulated unsheathed stranded copper conductor cable and connected to earth dolly to be drawn in concealed PVC conduit including connecting to main board complete all as specified and directed.Note : Three run of cable 10 Sqmm and one run of PVC conduit shall be considered as one. |
| 94 | M&L in replacement for Air termination, single pointed, copper rod 12mm dia and 300mm long complete all as specified and directed. |
| 95 | M&L in replacement for Copper strip 20 x 3.15mm with saddles and fixing screws etc. for roof conductors and down conductors above ground complete all as specified and directed. |
| 96 | M&L in replacement for Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hex. head screw complete all as specified and directed. |
| 97 | M&L in replacement for epoxy electric insulators dough moulded compound 40 mm with fixing screw etc for mounting earth conductors complete all as specified and directed. |
| 98 | M&L in replacement for Chemical earthing with copper earth plate 90x60cmx5mm & copper earth strip 32x6mm complete all as specified and directed. |
| 99 | S&F in repairs LT Control panel board, Outdoor type,double door, cubical type, padestal mounted, overall size not less than 1500 x 1000 x 450 mm, having independent compartment for bus bar, incoming feeder and each out going feeders, dust and vermin proof & lockable, factory made, fabricated out of 3 mm thick CRCA sheet suitable for 3 Phase 415 volts 50 Hz, AC supply, bus bar chamber with copper bus bar of 1200 Amp rating for 3 phase and neutral 4 wire system duly insulated with heat shrinkable type sleeves as per colour code, supported on epoxy insulators - 01 Set incl necessary copper cables of suitable size for MCCBs/MCBs / change over swicth / inter connections, common earth bus bar of GI Strip 32 x 6 mm at bottom with panel board at two earth terminals, cable glands with independent plates at bottom for each out going and in coming cables in cable alley panel board and painted with powder coating in siemens grey colour and provision for the following incoming and out going accessories all as approved and comprising as under :-Incoming :-a) MCCB 4P, 36 KA, 250 Amp,4P with microprocessor release - 01 No.b) Changeover on load 4P 250 A - 01 No.c) Digital Volt meter 0 - 500V, size 96 x 96 mm square type with selector switch - 01 Setd) Digital Amp Meter 0 - 300 Amp, size 96x96 mm square type with selector switch - 01 Sete) Copper wound with CTR 300/5 - 01 set.f) Indicator Lamps (LED type) showing R,Y, B phase - 01 set.Outgoing :-(a) MCCB 100A, 3P fixed type 16KA- 06 Nos(b) Angle iron base frame as reqd size as per above panel, total leg height 600 mm and grouting in side PCC 150 mm legs and made out of ISA 5050, 50 x 50 x 6 mm thick angle iron duly painted - 01 No. |
| 100 | Supply, laying, jointing and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 120 sq mm 3½ core complete all as specified and directed. |
| 101 | Description all as per item No 100 but size 50 sq mm 3½ core complete all as specified and directed. |
| 102 | M&L in replacement for earthing complete with galvanized steel earth plate electrode 60 x 60cm x 6 mm thick burried directly in ground vertically to a depth not less than 2.25 mtr deep below GL with top edge of the plate not less than 1.5 mtr below normal GL and connected to earth plate surrounded by 15 cm thick packed layers of charcoal dust and common salt and connected to galvanised iron strip 32×6mm as earthing strip by means of bolts, nuts, check nuts and washers of galvd iron or steel and thimbles and other end of the earth lead connected to test point and protected by galvd iron or steel pipe light grade 40 mm bore and water pipe 20mm bore GI light grade with funnel and wire mesh, including all necessary excavation and earth work PCC chamber in cement concrete 1:3:6 type C-2 and RCC cover and all as shown in electrical plate No 3 of MES schedule Pt I of 2009 complete all as specified and directed including testing on completion.Note : RCC pit cover shall be pre-cast of RCC (1:2:4) type B-I , 80mm thick reinforced with XPM weighting not less than 4 KG/sqmm in lieu of CI cover. |
| 103 | Excavation in trenches in any type of soil not exceeding 1.5 Mtr in wide and not exceeding 1.5m in depth for taking out / laying of under ground cable in trenches or cable ducts complete all as specified and directed. |
| 104 | Returning, filling in including spreading, levelling, watering and well ramming in layers, not exceeding 25 cm thick in soil after repairing / jointing and laying and testing of cables complete all as specified and directed. |
| 105 | Removing surplus soil to a distance not exceeding 50 Mtr and deposited at a level not exceeding 1.5 mtr above from the starting point complete all as specified and directed. |
| 106 | M&L natural river sand as cushioning of cables including spreading and punning down all as per clause No 19.75 of SSR part -I complete all as specified and directed. Note : Punned thickness shall be measured for payment purpose |
| 107 | Supply and laying brick of conventional size 230x110x75mm locallly available as protection of cable in trenches complete all as specified and directed. |
| 108 | S&F in repairs GI Pipe medium grade for protection of cable for road crossing and supporting to cable and fixing with panel, wall, pole complete all as specified size 100 mm complete all as specified and directed. |
| 109 | Note :-An amount of Rs. 287218 on account of Credit Schedule for Schedule 'A' Part-II shall be deducted from total quoted amount of BOQ to arrive at the contract sum. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 21 daysAug 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender